aboutsummaryrefslogtreecommitdiffstats
path: root/releasenotes
AgeCommit message (Collapse)AuthorFilesLines
2017-06-23Enable DPDK on boot using PreNetworkConfigSaravanan KR1-0/+8
DPDK has to be enabled on openvswitch on the boot before configuring the network as when the network uses DPDK ports OvS should be ready to handle DPDK. Enabled DPDK via PreNetworkConfig by checking if ServiceNames contains DPDK service. Implements: blueprint ovs-2-6-dpdk Closes-Bug: #1654975 Depends-On: I83a540336c01a696780621fb2b39486a6abf0917 Change-Id: I7af4534d91e67c94ba559b78b9ac6a001e639db3
2017-06-21Fixes incorrect glance api networkTim Rozet1-0/+3
The glance API network was being set to storage and it should be internal_api. Closes-Bug: 1699535 Change-Id: I75bc05aeab999f0e3eb3f4ebaceb276e888addc9 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-06-20Add release note for generated sample environmentsBen Nemec1-0/+21
This was missed in the original patch series, but this is a significant enough change that it needs to be communicated to users. Change-Id: Ibcfdde3cc544d152e78529fc57a63c7dc6592c4f
2017-06-19Merge "Add an example IronicConductor role"Jenkins1-0/+5
2017-06-16Merge "Make fernet max active keys configurable"Jenkins1-0/+5
2017-06-16Merge "Add templates to configure Ironic inspector"Jenkins1-0/+5
2017-06-16Merge "Pacemaker HA suport for OVN DB servers"Jenkins1-0/+3
2017-06-16Make fernet max active keys configurableJuan Antonio Osorio Robles1-0/+5
This will set the max_active_keys setting in keystone.conf, and furtherly we'll read this value from tripleo-common to do purging of keys if necessary. bp keystone-fernet-rotation Change-Id: I9c6b0708c2c03ad9918222599f8b6aad397d8089
2017-06-15Add VipMap outputJames Slagle1-0/+5
Add VipMap output to the top level stack output. VipMap is a mapping from each network to the VIP address on that network. Also includes the Redis VIP. This output facilitates deploying split-stack so you can feed the VIP addresses from VipMap as inputs into the services stack. implements blueprint split-stack-default Change-Id: I245920994613c9bd10801c25fa545267aa49b239
2017-06-15Add split-stack environmentsJames Slagle1-0/+7
Add 2 new environments to faciltate deploying split-stack: environments/overcloud-baremetal.j2.yaml environments/overcloud-services.j2.yaml The environments are used to deploy 2 separate Heat stacks, one for just the baremetal+network configuration and one for the service configuration. In order to keep Heat's view of the server's hostname consistent across the 2 stacks the 2 environments set the same HostnameFormat with "overcloud" as the stack name. implements blueprint split-stack-default Change-Id: I0b3f282c08af6fecea8f136908b806db70bada46
2017-06-15Add DeploymentSwiftDataMap parameterJames Slagle1-0/+6
The DeploymentSwiftDataMap parameter is used to set the deployment_swift_data property on the Server resoures. The parameter is a map of role names and node indexes to Swift container and object names to be used for storing deployment data. The parameter allows for using predefined Swift objects for storing deployment data instead of container/object names with generated uuid's from Heat. implements blueprint split-stack-default Depends-On: Ia07e9374a4b95bd0e74fc47fb9df4bf6ad096715 Change-Id: I471037de35e7f349d900462ec3ffb16fe2d6ebd9
2017-06-15Add os-collect-config data as an outputJames Slagle1-0/+6
Adds a new output, ServerOsCollectConfigData, which is the os-collect-config configuration associated with each server resource. This can be used to [pre]configure the os-collect-config agents on deployed-server's. Having the data available as a stack output is more user friendly than having to query several nested levels of stack resources, and then inspect resource metadata. implements blueprint split-stack-default Change-Id: Iaf062f1a72e2a9e4d97f84c67f72408a6b5cebfc Depends-On: I8acfd67cd8138d587cc362184c84a08134bf3157
2017-06-15Merge "Modify PreNetworkConfig config inline with role-specific parameters"Jenkins1-0/+11
2017-06-15Add an example IronicConductor roleDmitry Tantsur1-0/+5
Change-Id: I8dca09372a58b6dacbb8e65602e1b0bdb6c01ae7 Related-Blueprint: example-custom-role-environments
2017-06-14Merge "Update Panko api port"Jenkins1-0/+4
2017-06-14Update Panko api portPradeep Kilambi1-0/+4
The current port conflicts with trove. This is updated in puppet module. See related change: https://review.openstack.org/#/c/471551/ Change-Id: Iefacb98320eef0bca782055e3da5d243993828d7
2017-06-14Enable heat/puppet to manage the fernet keys and make it configurableJuan Antonio Osorio Robles1-0/+6
With the addition of the KeystoneFernetKeys parameter, it's now possible to do fernet key rotations using mistral, by modifying the KeystoneFernetKeys variable in mistral; subsequently a rotation could happen when doing a stack update. So this re-enables the managing of the key files by puppet. However, this is left configurable, as folks might want to manage those files out-of-band. bp keystone-fernet-rotation Change-Id: Ic82fb8b8a76481a6e588047acf33a036cf444d7d
2017-06-14Use KeystoneFernetKeys instead of individual parametersJuan Antonio Osorio Robles1-0/+10
This uses the newly introduced dict with the keys and paths instead of the individual keys. Having the advantage that rotation will be possible on stack update, as we no longer have a limit on how many keys we can pass (as we did with the individual parameters). bp keystone-fernet-rotation Change-Id: I7d224595b731d9f3390fce5a9d002282b2b4b8f2 Depends-On: I63ae158fa8cb33ac857dcf9434e9fbef07ecb68d
2017-06-14Merge "Add support for Cinder "NAS secure" driver params"Jenkins1-0/+5
2017-06-13Merge "Add support to configure Num of Storage sacks"Jenkins1-0/+3
2017-06-13Modify PreNetworkConfig config inline with role-specific parametersSaravanan KR1-0/+11
Existing host_config_and_reboot.role.j2.yaml is done in ocata to configure kernel args. This can be enhanced with use of role-specific parameters, which is done in the current patch. The earlier method is deprecated and will be removed in Q releae. Implements: blueprint ovs-2-6-dpdk Change-Id: Ib864f065527167a49a0f60812d7ad4ad12c836d1
2017-06-12Add support to configure Num of Storage sacksPradeep Kilambi1-0/+3
Gnocchi 4 supports storage sacks during upgrade. lets make this configurable if we want to use more metricd workers. Change-Id: Ibb2ee885e59d43c1ae20887ec1026786d58c6b9e
2017-06-12Add support for Cinder "NAS secure" driver paramsAlan Bishop1-0/+5
Add new parameters that control the NAS security settings in Cinder's NFS and NetApp back end drivers. The settings are disabled by default. Partial-Bug: #1688332 Depends-On: I76e2ce10acf7b671be6a2785829ebb3012b79308 Change-Id: I306a8378dc1685132f7ea3ed91d345eaae70046f
2017-06-12Pacemaker HA suport for OVN DB serversNuman Siddique1-0/+3
This patch adds the templates required to enable the OVN DB servers to be started in master/slave mode in the pacemaker cluster. For the OVN DBs base profile, ::tripleo::haproxy expects the parameter 'ovn_dbs_manage_lb' set to true in order for it to configure OVN DBs for load balancing (please see this commit [1]). So this patch sets 'ovn_dbs_manage_lb' to true. [1] - I9dc366002ef5919339961e5deebbf8aa815c73db Co-authored-by: Babu Shanmugam (babu.shanmugam@gmail.com) Depends-on: I94d3960e6c5406e3af309cc8c787ac0a6c9b1756 Change-Id: I60c55abfc523973aa926d8a12ec77f198d885916 Closes-bug: #1670564
2017-06-12Providing parameters specific to a workflow via plan-environmentSaravanan KR1-0/+4
Parameters which are not part of the heat environment template are required by the worflows like derive parameters. In order to seprate from the heat environment parameters, the workflow only parameters will be provided via plan-environement section, workflow_parameters. Implements: blueprint tripleo-derive-parameters Change-Id: I36d295223c28afff1e0996b4885b8a81c00842f0
2017-06-09Fix rpms being installed via DeployArtifactURLsAlex Schultz1-0/+4
The deploy-artifacts.sh script is supposed to support installing rpms when provided by DeployArtifactUrls. The problem is that it uses yum to install which does not actually work unless the filename ends with .rpm. This change updates the script to rename the downloaded file to end with .rpm if it is an rpm so that it is properly installed. Change-Id: I048d2b4474f9efe424e98e3868f325704e9c352f Closes-Bug: #1697102
2017-06-09Merge "Revert "Add support to configure Num of Storage sacks""Jenkins1-3/+0
2017-06-09Add templates to configure Ironic inspectorDan Prince1-0/+5
Implements: blueprint ironic-inspector-composable-service Co-Authored-By: Dmitry Tantsur <dtantsur@redhat.com> Change-Id: I825516f9f5c2b0c03a3f497d6954022714aab988
2017-06-09Revert "Add support to configure Num of Storage sacks"Pradeep Kilambi1-3/+0
This reverts commit a915b150018bf306a5942782bf93c5faadcd7cde. The argument is renamed and causing promotions to fail. Change-Id: I7e1674cff75b606c20956edddf70eee2990fca78
2017-06-08Merge "Standardize example role definitions"Jenkins1-0/+6
2017-06-08Merge "Add support to configure Num of Storage sacks"Jenkins1-0/+3
2017-06-07Standardize example role definitionsAlex Schultz1-0/+6
As we create new standard roles, we should include them from a single location for ease of use and to reduce the duplication of the role definitions elsewhere. This change adds a roles folder to the THT that can be used with the new roles commands in python-tripleoclient by the end user to generate a roles_data.yaml from a standard set of roles. Depends-On: I326bae5bdee088e03aa89128d253612ef89e5c0c Change-Id: Iad3e9b215c6f21ba761c8360bb7ed531e34520e6 Related-Blueprint: example-custom-role-environments
2017-06-07Fix the disable expirer to remove crontabPradeep Kilambi1-0/+5
Instead of doing this via puppet which has the consequence of including the step_config and getting included on the host manifest. Lets disable via ansible upgrade task instead. Change-Id: I5f1a4019dd635dea67db4313bd06a228ae7bacd4
2017-06-07Add support to configure Num of Storage sacksPradeep Kilambi1-0/+3
Gnocchi 4 supports storage sacks during upgrade. lets make this configurable if we want to use more metricd workers. Change-Id: I27390b8babf8c4ef35f4c9b8a2e5be69fb9a54ee
2017-06-07Ability to enable/disable debug mode per OpenStack serviceEmilien Macchi1-0/+9
Add ServiceDebug parameters for each services that will allow operators to enable/disable Debug for specific services. We keep the Debug parameters for backward compatibility. Operators want to enable Debug everywhere: Debug: true Operators want to disable Debug everywhere: Debug: false Operators want to disable Debug everywhere except Glance: GlanceDebug: true Operators want to enable Debug everywhere except Glance: Debug: true GlanceDebug: false New parameters: AodhDebug, BarbicanDebug, CeilometerDebug, CinderDebug, CongressDebug, GlanceDebug, GnocchiDebug, HeatDebug, HorizonDebug, IronicDebug, KeystoneDebug, ManilaDebug, MistralDebug, NeutronDebug, NovaDebug, OctaviaDebug, PankoDebug, SaharaDebug, TackerDebug, ZaqarDebug. Note: for backward compatibility in Horizon, HorizonDebug is set to false, so we maintain previous behavior. Change-Id: Icbf4a38afcdbd8471d1afc11743df9705451db52 Implement-blueprint: composable-debug Closes-Bug: #1634567
2017-06-06Merge "Update metric processing delay default"Jenkins1-0/+4
2017-06-05Merge "Release 7.0.0.0b2"Jenkins1-1/+1
2017-06-05Release 7.0.0.0b2Emilien Macchi1-1/+1
Change-Id: Ie8010969443324dc76be8ade8edc1390b073345b
2017-06-04Update metric processing delay defaultPradeep Kilambi1-0/+4
This helps with processing the backlog, so lets update the default out of the box. Change-Id: I06d4ca95f4a1da2864f4845ef3e7a74a1bce9e41
2017-06-03Merge "Modify vhost user socket directory's default value in environment file"Jenkins1-0/+6
2017-06-02Merge "Server blacklist support"Jenkins1-0/+6
2017-06-01Increase default for NovaReservedHostMemory to 4096Sven Anderson1-0/+4
Idle compute nodes are found to already consume ~1.5GB of memory, so 2GB is a bit tight. Increasing to 4GB to be on the safe side. Also see https://bugzilla.redhat.com/show_bug.cgi?id=1341178 Change-Id: Ic95984b62a748593992446271b197439fa12b376
2017-05-31Server blacklist supportJames Slagle1-0/+6
Adds the ability to blacklist servers from all SoftwareDeployment resources. The servers are specified in a new list parameter, DeploymentServerBlacklist by the Heat assigned name (overcloud-compute-0, etc). implements blueprint disable-deployments Change-Id: I46941e54a476c7cc8645cd1aff391c9c6c5434de
2017-05-30Merge "Enable arp_accept for all interfaces"Jenkins1-0/+9
2017-05-30Merge "Change database sync timeout from 300 to 900 in low-memory-usage ↵Jenkins1-0/+6
environment file."
2017-05-25Enable arp_accept for all interfacesIhar Hrachyshka1-0/+9
OpenStack heavily relies on gratuitous ARP updates when moving floating IP addresses between devices. When a floating IP moves, Neutron L3 agent issues a burst of gratuitous ARP packets that should update any existing ARP table entries on all nodes that belong to the same network segment. Due to locktime kernel behavior, some gratuitous ARP packets may be ignored [1], rendering ARP table entries broken for some time. Due to a kernel bug [2], the time may be as long as hours, depending on other traffic flowing to the node. With the current EL7 kernel, the only way to make sure that nodes honor all sent gratuitous ARP updates is to set arp_accept to 1; this will disable locktime mechanism for the packets sent by Neutron L3 agent, and will make sure ARP tables are always updated. [1] https://patchwork.ozlabs.org/patch/762732/ [2] https://bugzilla.redhat.com/show_bug.cgi?id=1450203 Related-Bug: #1690165 Change-Id: I863b240e0ab4c4d5bb844f91b607fd0937d5cedf
2017-05-25Merge "Enable mistral to run under mod_wsgi"Jenkins1-0/+7
2017-05-23Merge "Remove osd_pool_default_min_size to allow Ceph cluster to do the ↵Jenkins1-0/+12
right thing by default"
2017-05-22Remove osd_pool_default_min_size to allow Ceph cluster to do the right thing ↵Keith Schincke1-0/+12
by default The default value is 0 which has the minimum number be caluclated based on the replica count from osd_pool_defaut_size. The default replica count is 3 and the calculated min_size is 2. If the replica count is 1 then the min_size is 1. ie: min_size = replica - (replica/2) Add CephPoolDefaultSize parameter to ceph-mon.yaml. This parameter defaults to 3 but can be overriden. See puppet-ceph-devel.yaml for an example Change-Id: Ie9bdd9b16bcb9f11107ece614b010e87d3ae98a9
2017-05-22Disable mongodb by defaultJuan Antonio Osorio Robles1-0/+8
It's not used by any service that we enable by default. So instead, I added it to the environment that enables the services that use it. Change-Id: Id2e6550fb7c319fc52469644ea022cf35757e0ce