aboutsummaryrefslogtreecommitdiffstats
path: root/releasenotes
AgeCommit message (Collapse)AuthorFilesLines
2017-09-20Adds post_upgrade_tasks for any service post-upgrade ansible tasksmarios1-0/+12
This adds a new config/deployment per role that will come after any post deploy steps. It drives the same ansible config as the upgrade_tasks but instead collects the post_upgrade_tasks for any service in the given role. The workflow is upgrade_tasks, then post deploy steps (either puppet/ or docker/ depending on the env) and then the post_upgrade_tasks added here. This is added to the pacemaker/cinder-volume.yaml service for now see the bug below for more info Change-Id: Iced34fecf02ebddc91df9302de54d2f4c2cab680 Closes-Bug: 1706951 (cherry picked from commit 2e182bffeeb099cb5e0b1747086fb0e0f57b7b5d)
2017-09-12Merge "Fixes OpenDaylight updating port status" into stable/pikeJenkins1-0/+6
2017-09-12Merge "Persist containerized services httpd logs" into stable/pikeJenkins1-0/+11
2017-09-11Persist containerized services httpd logsBogdan Dobrelya1-0/+11
Store the httpd logs under dedicated /var/log/containers/httpd/ paths. Additionally, add release notes describing upgrade impact for containerized services logs. Closes-bug: #1700045 Change-Id: I8120c56f2315700862bd0f708b8baa8910275b09 Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com> (cherry picked from commit 287e84585ca9170570ce8d06eebd7f9a3ec3345c)
2017-09-08Disables QoS with OpenDaylight deploymentsItzik Brown1-0/+4
QoS is not fully supported and fails to load correctly with networking-odl. Therefore disabling it from Neutron extension drivers until we have it fully working. Change-Id: I89aa3628c1400305f9659f5c0c99942a7fa7d19e Closes-Bug: 1708131 (cherry picked from commit cfd0d185a93ac2922e233e268a32c3574bee37bf)
2017-09-08Fixes OpenDaylight updating port statusTim Rozet1-0/+6
ODL now uses a websocket port to update the port status to Neutron. This port (8185) was blocked so port updates were never received in Neutron and instances would not come up properly. This patch opens the port for ODL deployments. Closes-Bug: 1715484 Change-Id: Ic59b224c67c02b56b0273700e8e2aa85ae6f8c88 Signed-off-by: Tim Rozet <trozet@redhat.com> (cherry picked from commit e2558c4a665345e67fcc784c21188bdf06ff1126)
2017-09-07Merge "Support HA for OVN DBs containers using pacemaker bundle" into ↵Jenkins1-0/+1
stable/pike
2017-09-06Add param to configure snat mechanismJanki Chhatbar1-0/+5
Add a parameter to configure SNAT mechanism in OpenDayLight defaulting to conntrack for OVS and defaulting to controller mechanism for OVS-DPDK Change-Id: I48c6f07de55cb2574cc3a7e9653b812f875df726 Closes-Bug: #1710614 (cherry picked from commit 9a450a8e505b5d7ccef7e5e7675573da2a4cd42c)
2017-09-06Merge "Add support for Dell EMC Isilon Manila backend" into stable/pikeJenkins1-0/+4
2017-09-06Merge "Add support for Dell EMC VMAX Manila Backend" into stable/pikeJenkins1-0/+4
2017-09-05Add support for Dell EMC Isilon Manila backendrajinir1-0/+4
This change adds support for manila::backend::dellemc_isilon Change-Id: I92592e4b717d4b1812ccd810ec1daaedd181c3dd Implements: blueprint dellemc-isilon-manila (cherry picked from commit f6c9906d51fb3268b7a7d61d53181ab5d3c0d2ec)
2017-09-05Add support for Dell EMC VMAX Manila Backendrajinir1-0/+4
This change adds support for manila::backend::dellemc_vmax Change-Id: I92e189c8741c496ef6c27130f73829c327a99f1b Implements: blueprint dellemc-vmax-manila (cherry picked from commit 04daabdc8414e4435dc4cd3ccfea9a62b5631261)
2017-09-05manila: set "neutron_admin_auth_url" correctlyTom Barron1-0/+4
It was being set using NeutronAdmin endpoint but it is an authorization url. Set it using KeystoneInternal endpoint. Change-Id: I23f4a895628ac909a1fe1f93cecefa84f25858b1 Closes-Bug: #1712908 (cherry picked from commit 7380183cf590b74f5ad84bb40a8afa08979c235b)
2017-09-02Add support for Dell EMC VMAX ISCSI Backendrajinir1-0/+4
This change adds a new define for cinder::backend::dellemc_vmax_iscsi Change-Id: I7c685e0a3186da138964f17b487fb0c3533f58c7 Implements: blueprint dellemc-vmax-isci (cherry picked from commit c77189905525c6fe834e001f2231b9eab788cd01)
2017-09-01Remove ipv6 specific network templatesDan Sneddon1-0/+10
This change renders the IPv6 versions of the isolated networks using j2. To allow for backward compatibility, there will be 2 versions of the network definitions, <network>.yaml and <network>_v6.yaml. If the ip_subnet contains an IPv6 address, or if ipv6: true is set on the network definition in network_data.yaml, then the <network>.yaml version will contain an IPv6 definition, otherwise the <network>.yaml will be IPv4, and the <network>_v6.yaml will be IPv6. In a future follow-up patch, we will probably only create the required versions of the networks, either IPv4, IPv6, not both. The ipv6_subnet, ipv6_allocation_pools, and ipv6_gateway settings in the network_data.yaml definition file are used for the <network>_v6.yaml network definition. Note that these subnet/cidr/gateway definitions only set the defaults, which can be overridden with parameters set in an environment file. Since the parameters for IP and subnet range are the same (e.g. InternalApiNetCidr applies to both IPv4/v6), only one version can be used at a time. If an operator wishes to use dual-stack IPv4/IPv6, then two different networks should be created, and both networks can be applied to a single interface. Note that the workflow for the operator is the same as before this change, but a new example template has been added to environments/network-environment-v6.yaml. Change-Id: I0e674e4b1e43786717ae6416571dde3a0e11a5cc Partially-Implements: blueprint composable-networks Closes-bug: 1714115 (cherry picked from commit dd299f08bd6b1df43760148d83ce9b6e09ba6572)
2017-08-31Support HA for OVN DBs containers using pacemaker bundleNuman Siddique1-0/+1
ovn-dbs pacemaker bundle resources are created for supporting Master/Slave HA. puppet-tripleo already supports creating ovn-dbs bundle resources. The heat template added in this patch makes use of this. Closes-bug: #1699085 Change-Id: I23c2d312cfb144f9afc14f0982a92670dc29d74c (cherry picked from commit 444a39f5983e71e3222b6b7f8f523fce60aeece7)
2017-08-31Merge "Add support for Dell EMC VNX Manila Backend" into stable/pikeJenkins1-0/+4
2017-08-31Merge "Add support for Dell EMC Unity Manila Backend" into stable/pikeJenkins1-0/+3
2017-08-31Merge "Change ManageEventPipeline to true" into stable/pikeJenkins1-0/+6
2017-08-30Add support for Dell EMC VNX Manila Backendrajinir1-0/+4
This change adds support for manila::backend::dellemc_vnx Change-Id: I5fa5c2d6956429d1b9c12a5af6d4a887ed0624d9 Implements: blueprint dellemc-vnx-manila (cherry picked from commit a3debcfa8b2cbb3acaba292e082b0a3b0ee8ef54)
2017-08-30Add support for Dell EMC Unity Manila Backendrajinir1-0/+3
This change adds support for manila::backend::dellemc_unity Change-Id: Idec67d190b12359e8e6f1c157577088fa84ef41d Implements: blueprint dellemc-unity-manila (cherry picked from commit c5ee7b7714c712807f33ca1645186d33103a2264)
2017-08-30Change ManageEventPipeline to truePradeep Kilambi1-0/+6
Since the event pipeline publisher defaults in the heat templates are different from what puppet sets. We need to have the Manage to true so override takes effect. Without this we keep defaulting back to puppet defaults. We can flip this back to false once panko:// is droppped as a supported option from the pipeline. Change-Id: I2248c165783dddfb4cb7cf5644884dd8f6e6ed63 (cherry picked from commit 941b5d6797ea54afbc7b822ee045ce1186627e7c)
2017-08-30Use Python to compute release notes versionEmilien Macchi1-2/+2
Leave the version fields blank, since the release notes document applies to all versions. That will avoid manual changes in the future like we did until now. Change-Id: Ibb33ade808c9866b5314b7dda60a44000089a467 (cherry picked from commit 4782394044a8f66de63db7772b7a5992a781cc57)
2017-08-30Merge "Support deploying OVN as container services" into stable/pikeJenkins1-0/+4
2017-08-29manila: set "host" to "hostgroup"Tom Barron1-0/+9
when running manila-share under control of pacemaker, as is done for cinder-volume service in the same circumstance. Change-Id: Ic97f01913bae2a388c962a38fa175eb1d763cdcb Depends-On: Ie31f2d5ccf458f5fcfe8bec5f2c37f45070cfde2 Closes-Bug: #1712842 (cherry picked from commit 8fa6c6e58c7ac0d32bf2f0dfb586683cf006e3bf)
2017-08-28Support deploying OVN as container servicesNuman Siddique1-0/+4
This patch adds the support to containerize OVN services for the base profile. OVN db servers do not support active-active mode yet. It does support master-slave mode supported through pacemaker, which will be supported in a later patch. Presently the tripleo container framework doesn't allow to start a container in only controller 0 (or bootstrap node). OVN db servers and ovn-northd are started on all the controllers, but only the OVN db servers running in the boot strap controller are configured to listen on the tcp ports 6641 and 6642. OVN neutron mechanism driver and ovn-controller's use the ovn_dbs_vip to connect to the OVN db servers. Haproxy configures all the controllers as back ends, but only OVN db servers running on controller 0 respond since only they are configured properly. The OVN containers running on other controller nodes do not interact any way, but are wasteful resources. This patch also adds the scenario007-multinode-containers CI template. Partial-bug: #1699085 Change-Id: I98b85191cc1fd8c2b166924044d704e79a4c4c8a (cherry picked from commit e7cd03d2f0fcd8e3069246ced94f1a83869b8bea)
2017-08-25Containarise Barbican APIJanki Chhatbar1-0/+4
This containerises Barbican API in TripleO Change-Id: Icc5e9841ea48c806af4db61cd6de5e9a7a40a988 Partial-Bug: 1668924 Depends-On: I6b5ec18ccdd51b90ff27ff7d4341260dfba71e4e (cherry picked from commit 6d338b809accea4d3ba09ca8363b1a97ed79b658)
2017-08-22Zaqar: Match service name with service-net-mapJuan Antonio Osorio Robles1-0/+6
This is required for t-h-t to generate the appropriate hieradata. Change-Id: I9b451eac4427a52ad8eec62ff89acc6c6d3ab799 Closes-Bug: #1712328
2017-08-19Merge "Prepare reno for TripleO Pike RC1"Jenkins1-1/+1
2017-08-19Merge "Add support for Dell EMC Unity Cinder backend"Jenkins1-0/+4
2017-08-18Prepare reno for TripleO Pike RC1Emilien Macchi1-1/+1
Change-Id: Ied1d57cd187ffe480912a3820587952aa88936c3
2017-08-17Workaround for RHEL registration as "localhost"James Slagle1-0/+8
Workaround systems getting registered as "localhost" during RHEL registration if they don't have a fqdn set by first rm'ing the /etc/rhsm/facts directory. When the directory does not exist, the katello-rshm-consumer which runs when installing the katello-ca-consumer will not set the hostname.override fact to "localhost". Change-Id: Ia29aa9c775f715f9745bb7e1e4022cc395a7d092 Partial-Bug: #1711435
2017-08-17Add support for Dell EMC Unity Cinder backendrajinir1-0/+4
This change adds a new define for cinder::backend::dellemc_unity. Change-Id: I7f9dbb707cf9b5c90ec2f31dcff82cd578805b80 Implements: blueprint dellemc-unity-cinder
2017-08-16Merge "Add NeutronOverlayIPVersion parameter to neutron-plugins-ml2 service"Jenkins1-0/+5
2017-08-16Merge "Don't unregister on system/resource delete"Jenkins1-0/+8
2017-08-15Merge "Make network-isolation-v6 environment rendered for all roles"Jenkins1-0/+5
2017-08-15Add NeutronOverlayIPVersion parameter to neutron-plugins-ml2 serviceFeng Pan1-0/+5
This patch adds NeutronOverlayIPVersion parameter to congfigure neutron ML2 overlay_ip_version option from T-H-T. puppet-neutron already has support for configuration of this option, we are just exposing it from T-H-T. This parameter needs to be set to '6' when IPv6 vxlan tunnel endpoints are desired. Closes-Bug: #1691213 Change-Id: I056afa25f67a3b6857bdfef14e6d582b0a9e5e93 Signed-off-by: Feng Pan <fpan@redhat.com>
2017-08-15Merge "Fix Heat condition for RHEL registration yum update"Jenkins1-0/+9
2017-08-14Don't unregister on system/resource deleteJames Slagle1-0/+8
Don't unregister systems from the portal/satellite when deleting from Heat. There are several reasons why it's compelling to fix this behavior. See https://bugs.launchpad.net/tripleo/+bug/1710144 for full information. The previous behavior can be triggered by setting the DeleteOnRHELUnregistration parameter to "true". Closes-Bug: #1710144 Change-Id: I909a6f7a049dc23fc27f2231a4893d428f06a1f1
2017-08-14Fix Heat condition for RHEL registration yum updateJames Slagle1-0/+9
There were 2 problems with this condition making the rhel-registration.yal template broken: "conditions" should be "condition" The condition should refer to just a condition name defined in the "conditions:" section of the template. Change-Id: I14d5c72cf86423808e81f1d8406098d5fd635e66 Closes-Bug: #1709916
2017-08-11Convert objectstorage-role.yaml to role.role.j2.yamlSteven Hardy1-0/+8
Add some special-casing for backwards compatibility, such that the ObjectStorage role can be rendered via j2 for support of composable networks. Change-Id: I52abbefe2f5035059ccbed925990faab020c6c89 Partially-Implements: blueprint composable-networks
2017-08-11Convert compute-role.yaml to role.role.j2.yamlSteven Hardy1-0/+9
Add some special-casing for backwards compatibility, such that the Compute role can be rendered via j2 for support of composable networks. Change-Id: Ieee446583f77bb9423609d444c576788cf930121 Partially-Implements: blueprint composable-networks
2017-08-11Convert controller-role.yaml to role.role.j2.yamlSteven Hardy2-0/+29
Add deprecated role-specific parameters to role definition, in order to special-case some parameters for backwards compatibility, such that the Controller role can be rendered via j2 for support of composable networks. Co-Authored By: Dan Sneddon <dsneddon@redhat.com> Change-Id: I5983f03ae1b7f0b6add793914540b8ca405f9b2b Partially-Implements: blueprint composable-networks
2017-08-09Make network-isolation-v6 environment rendered for all rolesMichele Baldessari1-0/+5
In change If3989f24f077738845d2edbee405bd9198e7b7db we moved to jinja2 templating to render the networks. This change aims at doing so for the IPv6 network isolation environment. Change-Id: Ieebcff3db3f5756a5d23080ea3d09ce78de69e21
2017-08-04Merge "Adds environment file for ODL + SRIOV"Jenkins1-0/+4
2017-08-04Merge "Changing the default port-binding configuration"Jenkins1-0/+9
2017-07-31Enable Dpdk after rebooting with Hugepages for OvS2.7Saravanan KR1-0/+5
With OvS2.7, DPDK is initialized immediately after setting dpdk-init flag. DPDK requires hugepages configuration to be available on kernel args with a reboot. This patch reboots the node after applying the kernel args. And once the node is rebooted, DPDK will be enabled and then the deployment continues. Change-Id: Ide442e09c2bea56a38399247de588e63b4272326
2017-07-27Changing the default port-binding configurationItzik Brown1-0/+9
networking-odl no longer supports the network-topology port binding controller and instead now relies on a pseudo-agent binding controller. This means that each OVS node must be configured with host configuration in OVSDB about which VIF types, network types, functions, etc that this OVS node supports. The end result is this affects where nova and neutron will schedule instances. Changes Include: - Modifying default port binding controller to use pseudo agent - Adds necessary per role parameters to be able to configure host config on a per role basis to allow for heterogenous compute node configurations. Change-Id: I50458abf6a8a6bf724ad97accb6444d9c497d287 Closes-Bug: 1674995 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-07-27Merge "Deploy Ceph in containers using ceph-ansible via external workflow"Jenkins1-0/+14
2017-07-27Merge "Adding Tuned Service"Jenkins1-0/+4