summaryrefslogtreecommitdiffstats
path: root/releasenotes
AgeCommit message (Collapse)AuthorFilesLines
2017-09-01Remove ipv6 specific network templatesDan Sneddon1-0/+10
This change renders the IPv6 versions of the isolated networks using j2. To allow for backward compatibility, there will be 2 versions of the network definitions, <network>.yaml and <network>_v6.yaml. If the ip_subnet contains an IPv6 address, or if ipv6: true is set on the network definition in network_data.yaml, then the <network>.yaml version will contain an IPv6 definition, otherwise the <network>.yaml will be IPv4, and the <network>_v6.yaml will be IPv6. In a future follow-up patch, we will probably only create the required versions of the networks, either IPv4, IPv6, not both. The ipv6_subnet, ipv6_allocation_pools, and ipv6_gateway settings in the network_data.yaml definition file are used for the <network>_v6.yaml network definition. Note that these subnet/cidr/gateway definitions only set the defaults, which can be overridden with parameters set in an environment file. Since the parameters for IP and subnet range are the same (e.g. InternalApiNetCidr applies to both IPv4/v6), only one version can be used at a time. If an operator wishes to use dual-stack IPv4/IPv6, then two different networks should be created, and both networks can be applied to a single interface. Note that the workflow for the operator is the same as before this change, but a new example template has been added to environments/network-environment-v6.yaml. Change-Id: I0e674e4b1e43786717ae6416571dde3a0e11a5cc Partially-Implements: blueprint composable-networks Closes-bug: 1714115 (cherry picked from commit dd299f08bd6b1df43760148d83ce9b6e09ba6572)
2017-08-31Merge "Add support for Dell EMC VNX Manila Backend" into stable/pikeJenkins1-0/+4
2017-08-31Merge "Add support for Dell EMC Unity Manila Backend" into stable/pikeJenkins1-0/+3
2017-08-31Merge "Change ManageEventPipeline to true" into stable/pikeJenkins1-0/+6
2017-08-30Add support for Dell EMC VNX Manila Backendrajinir1-0/+4
This change adds support for manila::backend::dellemc_vnx Change-Id: I5fa5c2d6956429d1b9c12a5af6d4a887ed0624d9 Implements: blueprint dellemc-vnx-manila (cherry picked from commit a3debcfa8b2cbb3acaba292e082b0a3b0ee8ef54)
2017-08-30Add support for Dell EMC Unity Manila Backendrajinir1-0/+3
This change adds support for manila::backend::dellemc_unity Change-Id: Idec67d190b12359e8e6f1c157577088fa84ef41d Implements: blueprint dellemc-unity-manila (cherry picked from commit c5ee7b7714c712807f33ca1645186d33103a2264)
2017-08-30Change ManageEventPipeline to truePradeep Kilambi1-0/+6
Since the event pipeline publisher defaults in the heat templates are different from what puppet sets. We need to have the Manage to true so override takes effect. Without this we keep defaulting back to puppet defaults. We can flip this back to false once panko:// is droppped as a supported option from the pipeline. Change-Id: I2248c165783dddfb4cb7cf5644884dd8f6e6ed63 (cherry picked from commit 941b5d6797ea54afbc7b822ee045ce1186627e7c)
2017-08-30Use Python to compute release notes versionEmilien Macchi1-2/+2
Leave the version fields blank, since the release notes document applies to all versions. That will avoid manual changes in the future like we did until now. Change-Id: Ibb33ade808c9866b5314b7dda60a44000089a467 (cherry picked from commit 4782394044a8f66de63db7772b7a5992a781cc57)
2017-08-30Merge "Support deploying OVN as container services" into stable/pikeJenkins1-0/+4
2017-08-29manila: set "host" to "hostgroup"Tom Barron1-0/+9
when running manila-share under control of pacemaker, as is done for cinder-volume service in the same circumstance. Change-Id: Ic97f01913bae2a388c962a38fa175eb1d763cdcb Depends-On: Ie31f2d5ccf458f5fcfe8bec5f2c37f45070cfde2 Closes-Bug: #1712842 (cherry picked from commit 8fa6c6e58c7ac0d32bf2f0dfb586683cf006e3bf)
2017-08-28Support deploying OVN as container servicesNuman Siddique1-0/+4
This patch adds the support to containerize OVN services for the base profile. OVN db servers do not support active-active mode yet. It does support master-slave mode supported through pacemaker, which will be supported in a later patch. Presently the tripleo container framework doesn't allow to start a container in only controller 0 (or bootstrap node). OVN db servers and ovn-northd are started on all the controllers, but only the OVN db servers running in the boot strap controller are configured to listen on the tcp ports 6641 and 6642. OVN neutron mechanism driver and ovn-controller's use the ovn_dbs_vip to connect to the OVN db servers. Haproxy configures all the controllers as back ends, but only OVN db servers running on controller 0 respond since only they are configured properly. The OVN containers running on other controller nodes do not interact any way, but are wasteful resources. This patch also adds the scenario007-multinode-containers CI template. Partial-bug: #1699085 Change-Id: I98b85191cc1fd8c2b166924044d704e79a4c4c8a (cherry picked from commit e7cd03d2f0fcd8e3069246ced94f1a83869b8bea)
2017-08-25Containarise Barbican APIJanki Chhatbar1-0/+4
This containerises Barbican API in TripleO Change-Id: Icc5e9841ea48c806af4db61cd6de5e9a7a40a988 Partial-Bug: 1668924 Depends-On: I6b5ec18ccdd51b90ff27ff7d4341260dfba71e4e (cherry picked from commit 6d338b809accea4d3ba09ca8363b1a97ed79b658)
2017-08-22Zaqar: Match service name with service-net-mapJuan Antonio Osorio Robles1-0/+6
This is required for t-h-t to generate the appropriate hieradata. Change-Id: I9b451eac4427a52ad8eec62ff89acc6c6d3ab799 Closes-Bug: #1712328
2017-08-19Merge "Prepare reno for TripleO Pike RC1"Jenkins1-1/+1
2017-08-19Merge "Add support for Dell EMC Unity Cinder backend"Jenkins1-0/+4
2017-08-18Prepare reno for TripleO Pike RC1Emilien Macchi1-1/+1
Change-Id: Ied1d57cd187ffe480912a3820587952aa88936c3
2017-08-17Workaround for RHEL registration as "localhost"James Slagle1-0/+8
Workaround systems getting registered as "localhost" during RHEL registration if they don't have a fqdn set by first rm'ing the /etc/rhsm/facts directory. When the directory does not exist, the katello-rshm-consumer which runs when installing the katello-ca-consumer will not set the hostname.override fact to "localhost". Change-Id: Ia29aa9c775f715f9745bb7e1e4022cc395a7d092 Partial-Bug: #1711435
2017-08-17Add support for Dell EMC Unity Cinder backendrajinir1-0/+4
This change adds a new define for cinder::backend::dellemc_unity. Change-Id: I7f9dbb707cf9b5c90ec2f31dcff82cd578805b80 Implements: blueprint dellemc-unity-cinder
2017-08-16Merge "Add NeutronOverlayIPVersion parameter to neutron-plugins-ml2 service"Jenkins1-0/+5
2017-08-16Merge "Don't unregister on system/resource delete"Jenkins1-0/+8
2017-08-15Merge "Make network-isolation-v6 environment rendered for all roles"Jenkins1-0/+5
2017-08-15Add NeutronOverlayIPVersion parameter to neutron-plugins-ml2 serviceFeng Pan1-0/+5
This patch adds NeutronOverlayIPVersion parameter to congfigure neutron ML2 overlay_ip_version option from T-H-T. puppet-neutron already has support for configuration of this option, we are just exposing it from T-H-T. This parameter needs to be set to '6' when IPv6 vxlan tunnel endpoints are desired. Closes-Bug: #1691213 Change-Id: I056afa25f67a3b6857bdfef14e6d582b0a9e5e93 Signed-off-by: Feng Pan <fpan@redhat.com>
2017-08-15Merge "Fix Heat condition for RHEL registration yum update"Jenkins1-0/+9
2017-08-14Don't unregister on system/resource deleteJames Slagle1-0/+8
Don't unregister systems from the portal/satellite when deleting from Heat. There are several reasons why it's compelling to fix this behavior. See https://bugs.launchpad.net/tripleo/+bug/1710144 for full information. The previous behavior can be triggered by setting the DeleteOnRHELUnregistration parameter to "true". Closes-Bug: #1710144 Change-Id: I909a6f7a049dc23fc27f2231a4893d428f06a1f1
2017-08-14Fix Heat condition for RHEL registration yum updateJames Slagle1-0/+9
There were 2 problems with this condition making the rhel-registration.yal template broken: "conditions" should be "condition" The condition should refer to just a condition name defined in the "conditions:" section of the template. Change-Id: I14d5c72cf86423808e81f1d8406098d5fd635e66 Closes-Bug: #1709916
2017-08-11Convert objectstorage-role.yaml to role.role.j2.yamlSteven Hardy1-0/+8
Add some special-casing for backwards compatibility, such that the ObjectStorage role can be rendered via j2 for support of composable networks. Change-Id: I52abbefe2f5035059ccbed925990faab020c6c89 Partially-Implements: blueprint composable-networks
2017-08-11Convert compute-role.yaml to role.role.j2.yamlSteven Hardy1-0/+9
Add some special-casing for backwards compatibility, such that the Compute role can be rendered via j2 for support of composable networks. Change-Id: Ieee446583f77bb9423609d444c576788cf930121 Partially-Implements: blueprint composable-networks
2017-08-11Convert controller-role.yaml to role.role.j2.yamlSteven Hardy2-0/+29
Add deprecated role-specific parameters to role definition, in order to special-case some parameters for backwards compatibility, such that the Controller role can be rendered via j2 for support of composable networks. Co-Authored By: Dan Sneddon <dsneddon@redhat.com> Change-Id: I5983f03ae1b7f0b6add793914540b8ca405f9b2b Partially-Implements: blueprint composable-networks
2017-08-09Make network-isolation-v6 environment rendered for all rolesMichele Baldessari1-0/+5
In change If3989f24f077738845d2edbee405bd9198e7b7db we moved to jinja2 templating to render the networks. This change aims at doing so for the IPv6 network isolation environment. Change-Id: Ieebcff3db3f5756a5d23080ea3d09ce78de69e21
2017-08-04Merge "Adds environment file for ODL + SRIOV"Jenkins1-0/+4
2017-08-04Merge "Changing the default port-binding configuration"Jenkins1-0/+9
2017-07-31Enable Dpdk after rebooting with Hugepages for OvS2.7Saravanan KR1-0/+5
With OvS2.7, DPDK is initialized immediately after setting dpdk-init flag. DPDK requires hugepages configuration to be available on kernel args with a reboot. This patch reboots the node after applying the kernel args. And once the node is rebooted, DPDK will be enabled and then the deployment continues. Change-Id: Ide442e09c2bea56a38399247de588e63b4272326
2017-07-27Changing the default port-binding configurationItzik Brown1-0/+9
networking-odl no longer supports the network-topology port binding controller and instead now relies on a pseudo-agent binding controller. This means that each OVS node must be configured with host configuration in OVSDB about which VIF types, network types, functions, etc that this OVS node supports. The end result is this affects where nova and neutron will schedule instances. Changes Include: - Modifying default port binding controller to use pseudo agent - Adds necessary per role parameters to be able to configure host config on a per role basis to allow for heterogenous compute node configurations. Change-Id: I50458abf6a8a6bf724ad97accb6444d9c497d287 Closes-Bug: 1674995 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-07-27Merge "Deploy Ceph in containers using ceph-ansible via external workflow"Jenkins1-0/+14
2017-07-27Merge "Adding Tuned Service"Jenkins1-0/+4
2017-07-26Deploy Ceph in containers using ceph-ansible via external workflowGiulio Fidente1-0/+14
Add docker profiles to deploy Ceph in containers via ceph-ansible. This is implemented by triggering a Mistral workflow during one of the overcloud deployment steps, as provided by [1]. Some new service-specific parameters are available to determine the workflow to execute and the ansible playbook to use. A new `CephAnsibleExtraConfig` parameter can be used to provide arbitrary config variables consumed by `ceph-ansible`. The pre-existing template params consumed up until the Pike release to drive `puppet-ceph` continue to work and are translated, when possible, into the equivalent `ceph-ansible` variable. A new environment file is added to enable use of ceph-ansible; the pre-existing puppet-ceph implementation remains unchanged and usable for non-containerized deployments. 1. https://review.openstack.org/#/c/463324/ Change-Id: I81d44a1e198c83a4ef8b109b4eb6c611555dcdc5
2017-07-26Adds environment file for ODL + SRIOVTim Rozet1-0/+4
Using the separate neutron-opendaylight and SRIOV env files do not work because sriov includes using OVS agent (which ODL does not want or need) and the default ODL env file has no Compute ML2 because it is not needed. Thus a new environment file is needed for deploying these 2 features in combination. Closes-Bug: 1696667 Change-Id: I6f7a9368aa521de928c269619278c30acda03799 Signed-off-by: Tim Rozet <trozet@redhat.com>
2017-07-26Merge "Ps Cinder: Added support for password less login"Jenkins1-0/+4
2017-07-25Adding Tuned ServiceJoe Talerico1-0/+4
Allow the user to set a specific Tuned profile on a given host. Defaults to throughput-performance Change-Id: I0c66193d2733b7a82ad44b1cd0d2187dd732065a
2017-07-25Contrail network realignement + DPDK enablementMichael Henkel1-0/+9
This patch moves Contrail roles communication from public/external to internal_api network for OpenStack API. It also adds the option to enable dpdk. Monolithic firstboot script is broken down into small pre-network and per-node extraconfig scripts Change-Id: I296a3bf60cef6fa950fd71d6e68effe367d1e66b Closes-Bug: 1698422
2017-07-24Merge "Revert "Disable systemd-networkd & systemd-resolved""Jenkins1-9/+0
2017-07-24Merge "Release 7.0.0.0b3"Jenkins1-1/+1
2017-07-24Merge "Cleans up exec workaround for ODL container clustering"Jenkins1-0/+6
2017-07-24Release 7.0.0.0b3Emilien Macchi1-1/+1
Change-Id: Ibb75bfd01712257a20d72554308a0c099dd52b18
2017-07-24Merge "Drop MongoDB from the undercloud"Jenkins1-0/+5
2017-07-24Merge "Support configurable Zaqar backends"Jenkins1-0/+5
2017-07-23Drop MongoDB from the undercloudDan Prince1-0/+5
This patch drops MongoDB from the undercloud and swaps in a 'swift' and 'sqlalchemy' versions for the Zaqar backends. Change-Id: Ic6600f284dfbf4360b42598d3651b4c0f8046d1c
2017-07-24Support configurable Zaqar backendsDan Prince1-0/+5
This patch adds parameters to configure alternative version of the Zaqar messaging and management backends. The intent is to make use of these settings in the containers undercloud to use swift/mysql backends as a default thus avoiding the dependency on MongoDB. Change-Id: Ifd6a561737184c9322192ffc9a412c77d6eac3e9 Depends-On: Ie6a56b9163950cee2c0341afa0c0ddce665f3704 Depends-On: I3598e39c0a3cdf80b96e728d9aa8a7e6505e0690
2017-07-22Merge "Add composable services for the Veritas HyperScale."Jenkins1-0/+3
2017-07-21Merge "Add a new role for ComputeOvsDpdk and clean-up parameters"Jenkins1-0/+4