Age | Commit message (Collapse) | Author | Files | Lines |
|
This adds a new config/deployment per role that will come after any
post deploy steps. It drives the same ansible config as the
upgrade_tasks but instead collects the post_upgrade_tasks for any
service in the given role.
The workflow is upgrade_tasks, then post deploy steps (either
puppet/ or docker/ depending on the env) and then the
post_upgrade_tasks added here.
This is added to the pacemaker/cinder-volume.yaml service for now
see the bug below for more info
Change-Id: Iced34fecf02ebddc91df9302de54d2f4c2cab680
Closes-Bug: 1706951
(cherry picked from commit 2e182bffeeb099cb5e0b1747086fb0e0f57b7b5d)
|
|
|
|
|
|
Store the httpd logs under dedicated /var/log/containers/httpd/
paths.
Additionally, add release notes describing upgrade impact
for containerized services logs.
Closes-bug: #1700045
Change-Id: I8120c56f2315700862bd0f708b8baa8910275b09
Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com>
(cherry picked from commit 287e84585ca9170570ce8d06eebd7f9a3ec3345c)
|
|
QoS is not fully supported and fails to load correctly with
networking-odl. Therefore disabling it from Neutron extension drivers
until we have it fully working.
Change-Id: I89aa3628c1400305f9659f5c0c99942a7fa7d19e
Closes-Bug: 1708131
(cherry picked from commit cfd0d185a93ac2922e233e268a32c3574bee37bf)
|
|
ODL now uses a websocket port to update the port status to Neutron.
This port (8185) was blocked so port updates were never received in
Neutron and instances would not come up properly. This patch opens the
port for ODL deployments.
Closes-Bug: 1715484
Change-Id: Ic59b224c67c02b56b0273700e8e2aa85ae6f8c88
Signed-off-by: Tim Rozet <trozet@redhat.com>
(cherry picked from commit e2558c4a665345e67fcc784c21188bdf06ff1126)
|
|
stable/pike
|
|
Add a parameter to configure SNAT mechanism in OpenDayLight defaulting
to conntrack for OVS and defaulting to controller mechanism for OVS-DPDK
Change-Id: I48c6f07de55cb2574cc3a7e9653b812f875df726
Closes-Bug: #1710614
(cherry picked from commit 9a450a8e505b5d7ccef7e5e7675573da2a4cd42c)
|
|
|
|
|
|
This change adds support for manila::backend::dellemc_isilon
Change-Id: I92592e4b717d4b1812ccd810ec1daaedd181c3dd
Implements: blueprint dellemc-isilon-manila
(cherry picked from commit f6c9906d51fb3268b7a7d61d53181ab5d3c0d2ec)
|
|
This change adds support for manila::backend::dellemc_vmax
Change-Id: I92e189c8741c496ef6c27130f73829c327a99f1b
Implements: blueprint dellemc-vmax-manila
(cherry picked from commit 04daabdc8414e4435dc4cd3ccfea9a62b5631261)
|
|
It was being set using NeutronAdmin endpoint but it is an
authorization url. Set it using KeystoneInternal endpoint.
Change-Id: I23f4a895628ac909a1fe1f93cecefa84f25858b1
Closes-Bug: #1712908
(cherry picked from commit 7380183cf590b74f5ad84bb40a8afa08979c235b)
|
|
This change adds a new define for cinder::backend::dellemc_vmax_iscsi
Change-Id: I7c685e0a3186da138964f17b487fb0c3533f58c7
Implements: blueprint dellemc-vmax-isci
(cherry picked from commit c77189905525c6fe834e001f2231b9eab788cd01)
|
|
This change renders the IPv6 versions of the isolated
networks using j2. To allow for backward compatibility,
there will be 2 versions of the network definitions,
<network>.yaml and <network>_v6.yaml. If the ip_subnet
contains an IPv6 address, or if ipv6: true is set on the
network definition in network_data.yaml, then the
<network>.yaml version will contain an IPv6 definition,
otherwise the <network>.yaml will be IPv4, and the
<network>_v6.yaml will be IPv6.
In a future follow-up patch, we will probably only
create the required versions of the networks, either
IPv4, IPv6, not both.
The ipv6_subnet, ipv6_allocation_pools, and ipv6_gateway
settings in the network_data.yaml definition file are
used for the <network>_v6.yaml network definition.
Note that these subnet/cidr/gateway definitions only set
the defaults, which can be overridden with parameters
set in an environment file.
Since the parameters for IP and subnet range are the
same (e.g. InternalApiNetCidr applies to both IPv4/v6),
only one version can be used at a time. If an operator
wishes to use dual-stack IPv4/IPv6, then two different
networks should be created, and both networks can be
applied to a single interface.
Note that the workflow for the operator is the same as
before this change, but a new example template has been
added to environments/network-environment-v6.yaml.
Change-Id: I0e674e4b1e43786717ae6416571dde3a0e11a5cc
Partially-Implements: blueprint composable-networks
Closes-bug: 1714115
(cherry picked from commit dd299f08bd6b1df43760148d83ce9b6e09ba6572)
|
|
ovn-dbs pacemaker bundle resources are created for supporting
Master/Slave HA. puppet-tripleo already supports creating
ovn-dbs bundle resources. The heat template added in this patch
makes use of this.
Closes-bug: #1699085
Change-Id: I23c2d312cfb144f9afc14f0982a92670dc29d74c
(cherry picked from commit 444a39f5983e71e3222b6b7f8f523fce60aeece7)
|
|
|
|
|
|
This change adds support for manila::backend::dellemc_vnx
Change-Id: I5fa5c2d6956429d1b9c12a5af6d4a887ed0624d9
Implements: blueprint dellemc-vnx-manila
(cherry picked from commit a3debcfa8b2cbb3acaba292e082b0a3b0ee8ef54)
|
|
This change adds support for manila::backend::dellemc_unity
Change-Id: Idec67d190b12359e8e6f1c157577088fa84ef41d
Implements: blueprint dellemc-unity-manila
(cherry picked from commit c5ee7b7714c712807f33ca1645186d33103a2264)
|
|
Since the event pipeline publisher defaults in the heat templates are
different from what puppet sets. We need to have the Manage to true so
override takes effect. Without this we keep defaulting back to puppet
defaults. We can flip this back to false once panko:// is droppped as
a supported option from the pipeline.
Change-Id: I2248c165783dddfb4cb7cf5644884dd8f6e6ed63
(cherry picked from commit 941b5d6797ea54afbc7b822ee045ce1186627e7c)
|
|
|
|
when running manila-share under control of pacemaker, as
is done for cinder-volume service in the same circumstance.
Change-Id: Ic97f01913bae2a388c962a38fa175eb1d763cdcb
Depends-On: Ie31f2d5ccf458f5fcfe8bec5f2c37f45070cfde2
Closes-Bug: #1712842
(cherry picked from commit 8fa6c6e58c7ac0d32bf2f0dfb586683cf006e3bf)
|
|
This patch adds the support to containerize OVN services for the
base profile.
OVN db servers do not support active-active mode yet. It does support
master-slave mode supported through pacemaker, which will be supported
in a later patch.
Presently the tripleo container framework doesn't allow to start a
container in only controller 0 (or bootstrap node). OVN db servers and
ovn-northd are started on all the controllers, but only the OVN db
servers running in the boot strap controller are configured to listen
on the tcp ports 6641 and 6642. OVN neutron mechanism driver
and ovn-controller's use the ovn_dbs_vip to connect to the OVN db servers.
Haproxy configures all the controllers as back ends, but only OVN db
servers running on controller 0 respond since only they are configured
properly.
The OVN containers running on other controller nodes do not interact
any way, but are wasteful resources.
This patch also adds the scenario007-multinode-containers CI template.
Partial-bug: #1699085
Change-Id: I98b85191cc1fd8c2b166924044d704e79a4c4c8a
(cherry picked from commit e7cd03d2f0fcd8e3069246ced94f1a83869b8bea)
|
|
This containerises Barbican API in TripleO
Change-Id: Icc5e9841ea48c806af4db61cd6de5e9a7a40a988
Partial-Bug: 1668924
Depends-On: I6b5ec18ccdd51b90ff27ff7d4341260dfba71e4e
(cherry picked from commit 6d338b809accea4d3ba09ca8363b1a97ed79b658)
|
|
This is required for t-h-t to generate the appropriate hieradata.
Change-Id: I9b451eac4427a52ad8eec62ff89acc6c6d3ab799
Closes-Bug: #1712328
|
|
|
|
Workaround systems getting registered as "localhost" during
RHEL registration if they don't have a fqdn set by first
rm'ing the /etc/rhsm/facts directory. When the directory does not
exist, the katello-rshm-consumer which runs when installing
the katello-ca-consumer will not set the hostname.override fact to
"localhost".
Change-Id: Ia29aa9c775f715f9745bb7e1e4022cc395a7d092
Partial-Bug: #1711435
|
|
This change adds a new define for cinder::backend::dellemc_unity.
Change-Id: I7f9dbb707cf9b5c90ec2f31dcff82cd578805b80
Implements: blueprint dellemc-unity-cinder
|
|
|
|
|
|
|
|
This patch adds NeutronOverlayIPVersion parameter to congfigure
neutron ML2 overlay_ip_version option from T-H-T. puppet-neutron
already has support for configuration of this option, we are just
exposing it from T-H-T. This parameter needs to be set to '6' when
IPv6 vxlan tunnel endpoints are desired.
Closes-Bug: #1691213
Change-Id: I056afa25f67a3b6857bdfef14e6d582b0a9e5e93
Signed-off-by: Feng Pan <fpan@redhat.com>
|
|
|
|
Don't unregister systems from the portal/satellite
when deleting from Heat. There are several reasons why
it's compelling to fix this behavior. See
https://bugs.launchpad.net/tripleo/+bug/1710144
for full information. The previous behavior can be triggered
by setting the DeleteOnRHELUnregistration parameter to "true".
Closes-Bug: #1710144
Change-Id: I909a6f7a049dc23fc27f2231a4893d428f06a1f1
|
|
There were 2 problems with this condition making the
rhel-registration.yal template broken:
"conditions" should be "condition"
The condition should refer to just a condition name defined in the
"conditions:" section of the template.
Change-Id: I14d5c72cf86423808e81f1d8406098d5fd635e66
Closes-Bug: #1709916
|
|
Add some special-casing for backwards compatibility, such that the
ObjectStorage role can be rendered via j2 for support of composable networks.
Change-Id: I52abbefe2f5035059ccbed925990faab020c6c89
Partially-Implements: blueprint composable-networks
|
|
Add some special-casing for backwards compatibility, such that the
Compute role can be rendered via j2 for support of composable networks.
Change-Id: Ieee446583f77bb9423609d444c576788cf930121
Partially-Implements: blueprint composable-networks
|
|
Add deprecated role-specific parameters to role definition, in
order to special-case some parameters for backwards compatibility,
such that the Controller role can be rendered via j2 for support
of composable networks.
Co-Authored By: Dan Sneddon <dsneddon@redhat.com>
Change-Id: I5983f03ae1b7f0b6add793914540b8ca405f9b2b
Partially-Implements: blueprint composable-networks
|
|
In change If3989f24f077738845d2edbee405bd9198e7b7db we moved to jinja2
templating to render the networks. This change aims at doing so for the
IPv6 network isolation environment.
Change-Id: Ieebcff3db3f5756a5d23080ea3d09ce78de69e21
|
|
|
|
|
|
With OvS2.7, DPDK is initialized immediately after setting
dpdk-init flag. DPDK requires hugepages configuration to be
available on kernel args with a reboot. This patch reboots
the node after applying the kernel args. And once the node
is rebooted, DPDK will be enabled and then the deployment
continues.
Change-Id: Ide442e09c2bea56a38399247de588e63b4272326
|
|
networking-odl no longer supports the network-topology port
binding controller and instead now relies on a pseudo-agent binding
controller. This means that each OVS node must be configured with
host configuration in OVSDB about which VIF types, network types,
functions, etc that this OVS node supports. The end result is this
affects where nova and neutron will schedule instances.
Changes Include:
- Modifying default port binding controller to use pseudo agent
- Adds necessary per role parameters to be able to configure host
config on a per role basis to allow for heterogenous compute node
configurations.
Change-Id: I50458abf6a8a6bf724ad97accb6444d9c497d287
Closes-Bug: 1674995
Signed-off-by: Tim Rozet <trozet@redhat.com>
|
|
|
|
|
|
Add docker profiles to deploy Ceph in containers via ceph-ansible. This is
implemented by triggering a Mistral workflow during one of the overcloud
deployment steps, as provided by [1].
Some new service-specific parameters are available to determine the workflow to
execute and the ansible playbook to use. A new `CephAnsibleExtraConfig`
parameter can be used to provide arbitrary config variables consumed by `ceph-ansible`.
The pre-existing template params consumed up until the Pike release to
drive `puppet-ceph` continue to work and are translated, when possible, into
the equivalent `ceph-ansible` variable.
A new environment file is added to enable use of ceph-ansible;
the pre-existing puppet-ceph implementation remains unchanged and usable
for non-containerized deployments.
1. https://review.openstack.org/#/c/463324/
Change-Id: I81d44a1e198c83a4ef8b109b4eb6c611555dcdc5
|
|
Using the separate neutron-opendaylight and SRIOV env files do not work
because sriov includes using OVS agent (which ODL does not want or need)
and the default ODL env file has no Compute ML2 because it is not
needed. Thus a new environment file is needed for deploying these 2
features in combination.
Closes-Bug: 1696667
Change-Id: I6f7a9368aa521de928c269619278c30acda03799
Signed-off-by: Tim Rozet <trozet@redhat.com>
|
|
|
|
Allow the user to set a specific Tuned profile on a given host.
Defaults to throughput-performance
Change-Id: I0c66193d2733b7a82ad44b1cd0d2187dd732065a
|