Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
|
|
|
|
|
|
Adds a new nested stack deployment which allows operators to
opt-in to deploy tarball's and RPM packages by setting
DeployArtifactURLs as a parameter_default in a Heat
environment.
The intent is to use this setting to allow t-h-t to
transparently deploy things like tarballs of puppet modules
via a Swift Temp URL.
Change-Id: I1bad4a4a79cf297f5b6e439e0657269738b5f326
Implements: blueprint puppet-modules-deployment-via-swift
|
|
|
|
|
|
Currently since nova compute is not configured to
send notifications to ceilometer, tempest tests
fail on tempest.api.telemetry.test_telemetry_notification_api.
Change-Id: I763b7d246ae3f5955b6f555c8fd107d2cac89787
|
|
Configures all services to send notifications to rabbit. The puppet
modules are not consistent regarding how this is done - some expose
notification config as a top-level param, others you need to set it
through a *_config structure, and cinder provides a separate class
dedicated to enabling ceilometer notifications.
Change-Id: I23e2ddad3c59a06cfbfe5d896a16e6bad2abd943
|
|
Populates /etc/hosts with an entry for each IP address the node
is on, which will be useful to migrate services configuration from
using IPs into using hostnames.
This is how the lines look like on a host which doesn't have all ports:
172.16.2.6 overcloud-novacompute-0.localdomain overcloud-novacompute-0
192.0.2.9 overcloud-novacompute-0-external
172.16.2.6 overcloud-novacompute-0-internalapi
172.16.1.6 overcloud-novacompute-0-storage
192.0.2.9 overcloud-novacompute-0-storagemgmt
172.16.0.4 overcloud-novacompute-0-tenant
192.0.2.9 overcloud-novacompute-0-management
the network against which the default (or primary) name is resolved
can be configured (for computes) via ComputeHostnameResolveNetwork
Change-Id: Id480207c68e5d68967d67e2091cd081c17ab5dd7
|
|
During upgrades, we only run Puppet on the whole deployment to converge
the state, after the upgrade workflow itself has been fully
completed. That is an opportunity to utilize Puppet to make sure Nova
Compute RPC doesn't remain pinned to the older version.
Change-Id: I6ebc813a80dfd9dfbbb213c38724487e044507b8
|
|
|
|
|
|
|
|
It is currently possible to provide arbitrary config settings for
Cinder using the "cinder::config::cinder_config:" hiera key. To add
a backend though particular one has to edit the list of enabled
backends in Cinder too which isn't possible. This change will make
it possible using a user-customizable array of backends to be enabled.
Change-Id: Ic664c1c2b0f7b1b4b6be8b5064a38650694d4857
|
|
Our current nova-neutron configuration does not work with
the latest puppet-nova. In particular, this patch[1].
This commit adds keystone v3 endpoints to the map and gets the
nova::network::neutron configuration to use them.
[1] https://github.com/openstack/puppet-nova/commit/d09868a59c451932d67c66101b725182d7066a14
Change-Id: Ifb8c23c81c665c2732fa5cd757760668b06a449a
|
|
See RHBZ 1311005 and 1247303. In short: sometimes when a controller
node gets fenced, rabbitmq is unable to rejoin the cluster. To fix this
we need two steps:
1) The fix for the RA in BZ 1247303
2) Add notify=true to the meta parameters of the rabbitmq resource on
fresh installs and updates
Note that if this change is applied on systems that do not
have the fix for the rabbitmq resource agent, no action is taken.
So when the resource agent will be updated, the notify
operation will start to work as soon as the first monitor
action will take place.
Fixes RH Bug #1311005
Change-Id: I513daf6d45e1a13d43d3c404cfd6e49d64e51d5a
|
|
This change adds extra config yaml files for big switch agent
and big switch lldp.
This change is mainly for compute nodes. The changes related
to controller nodes are landed at e78e1c8d9b5a7ebf327987b22091bff3ed42d1c1
This change also removes the neutron_enable_bigswitch_ml2 flag. Instead,
User needs to specify NeutronMechanismDrivers: bsn_ml2 in environment file.
Previous discussion about this change can be found at an abandoned
review request https://review.openstack.org/#/c/271940/
Depends-On: Iefcfe698691234490504b6747ced7bb9147118de
Change-Id: I81341a4b123dc4a8312a9a00f4b663c7cca63d7c
|
|
This commit ensures we are not using any deprecated parameters for
nova::network::neutron and are using the right variable names.
Change-Id: Ic1b41e2cdbb6b180496822cc363c433e9388aa02
|
|
|
|
|
|
By configuring the Cinder 'host' setting via the appropriate class
param instead of cinder_config we don't risk to override it if the
user is to pass additional config settings using cinder_config in
ExtraConfig.
Change-Id: Idf33d87e08355b5b4369ccb0001db8d4c3b4c20f
|
|
|
|
|
|
|
|
This change adds puppet hieradata settings which disable IPv6
autoconfiguration and accept_ra by default on all interfaces.
When IPv6 is used, the interfaces are individually enabled and
configured with static IP addresses.
The networking on the compute host needs to be completely
separate from the tenant networking, in order to safeguard the
compute host and isolate tenant traffic. This change disables
IPv6 autoconfiguration and acceptance of RAs by default on
interfaces unless specifically enabled.
Without these settings, IPv6 is enabled on all interfaces, as well
as autoconfiguration and accept_ra, so when the compute host
creates a bridge interface for the router (qbr-<ID>), the
compute node will automatically assign an IPv6 address and will
install a default IPv6 route on the bridge interface when it
receives the RAs from the Neutron router.
The change to turn off autoconfiguration means that interfaces
will not self-assign an IPv6 address, and the change to not accept
RAs is a security hardening feature. This requires that a
static gateway address be declared in the network environment
in the parameter ExternalNetworkDefaultRoute. Alternately, sysctl
can be modified to change the accept_ra behavior for specific
interfaces.
Change-Id: I8a8d311a14b41baf6e7e1b8ce26a63abc2eaabef
Closes-bug: 1544296
|
|
|
|
|
|
This change adds the TripleO Heat Parameters and Puppet hieradata
to support setting the MTU for Neutron tenant networks. A new
parameter, NeutronTenantMtu is introduced, and this gets used for
the NeutronDnsmasqOptions and in Puppet hieradata.
NeutronTenantMtu is also used in the Puppet hieradata for both the
compute and control nodes. Two values are set:
nova::compute::network_device_mtu
which sets /etc/nova/nova.conf: network_device_mtu = <NeutronTenantMtu>
neutron::network_device_mtu
which sets in /etc/neutron/neutron.conf:
network_device_mtu = <NeutronTenantMtu>
finally, the NeutronDnsmasqOptions parameter becomes a str_format
that maps the NeutronTenantMtu onto the DHCP options,
so a default of 'dhcp-option-force=26,%MTU%' would be formatted to
'dhcp-option-force=26,1300' if NeutronTenantMtu were 1300.
This will set dnsmasq to serve an MTU via DHCP that matches the
NeutronTenantMtu:
/etc/neutron/dnsmasq-neutron.conf:dhcp-option-force=26,1300
Typically, you would change all three of these settings to use small
or jumbo frames in VMs. When using tunneling, NeutronTenantMtu
should be set at least 50 bytes smaller than the physical network
MTU in order to make room for tunneling overhead.
Note that this change does not support setting the MTU on veth
interfaces if veth patches are used to br-int instead of OVS
patches.
Change-Id: I38840e082ee01dc3b6fc78e1dd97f53fa4e63039
|
|
|
|
Currently the permissions for the CA file that is injected (if the
environment is set), doesn't permit users that don't belong to the group
that owns the file to read it. This is too restrictive and isn't
necessary, as the certificate should be public.
This is useful in the case where we want a service that can't read the
certificate chain (or bundle) to be able to read that CA certificate.
This is the case for the MariaDB version that is being used in CentOS
7.1 for example.
Change-Id: I6ff59326a5570670c031b448fb0ffd8dfbd8b025
|
|
|
|
|
|
We were incorrectly wiring the rbd user to the relevant glance
module parameter, making it was impossible to customize the
rbd user when using an external Ceph.
Change-Id: Ibe4eaedf986a9077f869c6530381e69ee0281f5b
|
|
|
|
|
|
This hieradata key, neutron::agents::ml2::ovs:bridge_mappings was
missing a : before bridge_mappings causing the value to be blank in
/etc/neutron/plugins/ml2/openvswitch_agent.ini even if a value had been
specified.
Change-Id: I377565d3fb821be1bb2dc7d92ec1ad25a4a3b1f1
|
|
|
|
As per conversation in [1], these settings should have probably never
been there.
1. https://bugzilla.redhat.com/show_bug.cgi?id=1262409
Change-Id: I116f825ba0fe3e4faac8dd347bb087e1b4c70e57
|
|
Without this the heat database tables will grow without limit.
Change-Id: I687e733db1a73ebc2047609a03be768093010dd4
DependsOn: Ia2b80e5003450cd794ebb0c9ca72200ec8616e81
|
|
|
|
|
|
|
|
|
|
|
|
This enables the creation of the nova_api database that is now
mandatory since https://review.openstack.org/#/c/245828/
Change-Id: Ia8242f23864ebb14ccf858a77ba754059e9c2d4a
Related-Bug: #1539793
|
|
|
|
For both HA & non-HA scenarios, switch puppet-keystone configuration to
be run in a WSGI process instead of eventlet.
WSGI is the way to go for scaling Keystone, moreover, eventlet won't be
support in next OpenStack releases.
Co-Authored-By: Dan Prince <dprince@redhat.com>
Depends-On: I22a348c298ff44f616b2e898f4872eddea040239
Change-Id: I862b4a68f43347564ec3c0ddc4ec9e1d1c755cf2
Signed-off-by: Jason Guiditta <jguiditt@redhat.com>
|
|
During high load, the default limit of the kernel connection tracking
table (65536) is often too low, resuling in error messages such as:
kernel: nf_conntrack: table full, dropping packet
This patch increases the limit to 500,000.
Since the nf_conntrack kernel module is not always loaded by default, it also
adds a mechanism to load kernel modules via hieradata using the kmod puppet
module. In order to express the needed dependency in puppet that kernel modules
are loaded before sysctl settings are applied, the Exec resources tagged with
'kmod::load' are specified in a resource collector to express that that Exec
resources with the tag should run before Sysctl resources.
Depends-On: I59cc2280ebae315af38fb5008e6ee0073195ae51
Change-Id: Iffa0a77852729786b69945c1e72bc90ad57ce3bb
|
|
Updated the setting for the dell storage center
api port to the right variable name ::dell_sc_api_port
Change-Id: I67a7533469947355629b6cb54b79759e21e0ec55
|