summaryrefslogtreecommitdiffstats
path: root/puppet
AgeCommit message (Collapse)AuthorFilesLines
2016-10-12Disable IPv6 RAs & Autoconf For All (Not Just Default)Dan Sneddon1-0/+4
The current kernel sysctl settings modify the net.ipv6.conf.default.accept_ra and net.ipv6.conf.default.autoconf to both be '0'. However, this is overridden by the settings in net.ipv6.conf.all, so no matter what setting is in the ifcfg file for the IPv6 interface, autoconfiguration and accept_ra will be enabled. This causes a security vulnerability where rogue RAs could be used to intercept traffic from the controllers. This change sets both default and all settings to '0' for IPv6 accept_ra and autoconf. Closes-Bug: 1632830 Change-Id: I95b86c5c6feed30dfa5103ffbddb9e85ac567bbb
2016-10-12Merge "Allow Glance API and Registry to be split"Jenkins3-140/+197
2016-10-12Merge "Add parameters to run nova over httpd"Jenkins1-0/+18
2016-10-12Allow Glance API and Registry to be splitDan Prince3-140/+197
The glance-api and glance-registry services are currently coupled in that some of the hiera settings in the API are required for the registry to run correctly (the backend settings). This patch moves some of the common settings into glance-base and then updates the glance-api and glance-registry services to supply that service. Change-Id: Ie3d7e24c7fd475e3f6ad542c1654eb7dbd9d9b35 Closes-bug: #1628582
2016-10-12Merge "Set the notification driver for glance"Jenkins1-0/+1
2016-10-10Merge "Remove unneeded *_enable_backend hiera from Manila backends"Jenkins3-12/+0
2016-10-10Set the notification driver for glancePradeep Kilambi1-0/+1
Need to set the right default notification driver for glance so telemetry receives them accordingly. Without this tempest tests fail. Closes-bug: #1631939 Change-Id: I1cee5467d077eea6142076925646f7d0cdae96c7
2016-10-07Make step an integer on the pacemaker controllerDan Prince1-0/+3
This resolves the issue causing the 'step' hiera setting to get written as a string (thus causing puppet failures) on a pacemaker controller. Change-Id: I70037889e499846460357928f8637a35ac97bc7a Closes-bug: #1631488
2016-10-07Merge "Renames OpenDaylight to OpenDaylightApi and splits out OVS configuration"Jenkins1-11/+0
2016-10-07Remove unneeded *_enable_backend hiera from Manila backendsGiulio Fidente3-12/+0
Depends-On: I04e28a95e8d69a24cd3df109bf1802bfcbd941db Change-Id: I4ada033155e5fde0add08ec9aa8f6af7c31d53f3
2016-10-07Merge "Specify the Ceph packages to be installed"Jenkins1-0/+6
2016-10-06Merge "Add Select per-network hostnames for service_node_names to ↵Jenkins1-0/+45
role.role.j2.yaml"
2016-10-06Specify the Ceph packages to be installedJohn Fulton1-0/+6
The puppet-ceph module defaults to 'ceph' but that is a metapacakge which isn't provided in all repos. Depends-On: I13462219522386f8740b0d70916a44f3474115e4 Change-Id: Ie55d22301dd22102d471e6002dfcaad4bfadd5f6 Related-Bug: 1629933
2016-10-06Enable firewalling by default on compute nodesEmilien Macchi4-5/+12
- Move VXLAN and VRRP rules from Neutron Server to the right services. - Enable Firewall by default on Compute nodes. Change-Id: I99d172dcedaf6be297aad184cc51fe9f292a57e1
2016-10-06Re-enable ManageFirewall by default.Dan Prince2-3/+3
This default setting got lots in the composable roles/services patches. Re-enable the ManageFirewall setting by default per what we did in git commit 73c76b867ddc8a23a30b9a3cac4031189d4178c6. We also fix a typo in neutron-api.yaml so that the firewall rules matches to service_name. (otherwise it won't get loaded). Also, drops the environments/manage-firewall.yaml which is no longer needed if we enable firewall management by default. Change-Id: Ie198e4efd190131d0722085b10ef77da9005bc1b Closes-bug: 1629934
2016-10-06Add Select per-network hostnames for service_node_names to role.role.j2.yamlCarlos Camacho1-0/+45
This will wire up the per-network hostnames in the generic role. Needs to land after https://review.openstack.org/#/c/378764 Partial-Bug: #1626976 Change-Id: I595f35cce03d9f416a1768aa5c349a1bb20b0e19
2016-10-06Merge "restore missing fluentd client functionality"Jenkins8-42/+8
2016-10-06Merge "Add generic template for custom roles."Jenkins1-0/+407
2016-10-06Merge "Set proper ceph config path for manila"Jenkins1-1/+1
2016-10-06Add generic template for custom roles.Carlos Camacho1-0/+407
This submission creates a generic template file to deploy custom roles. Also adds a file to specify an exclusion role list in order to avoid not to generate the template for those roles. Partial-Bug: #1626976 Depends-On: I6d7247bbb8702eb0ab9bdf133b5ab1c6e8349d98 Change-Id: I3e11c089023b793a5063d9e1714527a3fe2b7458
2016-10-05Set proper ceph config path for manilaTom Barron1-1/+1
When deploying manila with cephfs backend, /etc/manila/manila.conf should define cephfs_conf_path = /etc/ceph/ceph.conf in the cephfs native backend since this is the conventional path that ceph operators expect and since we document that path upstream. Change-Id: I4abf5c33b675b1102413a84d64f4ce23b07b4485 Closes-Bug: 1630777
2016-10-05restore missing fluentd client functionalityLars Kellogg-Stedman8-42/+8
in the great rebase following the JINJA ALL THE THINGS changes we lost critical functionality in the fluentd client service. This review restores the missing features. Change-Id: I7c23f16f81e75f3da6a24587b2eb8385b3e920a4 Closes-bug: 1630692
2016-10-05Renames OpenDaylight to OpenDaylightApi and splits out OVS configurationTim Rozet1-11/+0
This patch modifies the service name to be more appropriately called "OpenDaylightApi" along side the "OpenDaylightOvs" service used to configure OpenVSwitch. It also splits out the OVS configuration for controller nodes into the composable OpenDaylightOvs service. Related-Bug: #1629408 Change-Id: I15221401acdfb2a9ef81107b54a8005348f8372f Signed-off-by: Tim Rozet <trozet@redhat.com>
2016-10-05Select per-network hostnames for service_node_namesSteven Hardy6-0/+228
Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com> Depends-On: Ic6fec1057439ed9122d44ef294be890d3ff8a8ee Change-Id: I754c4a41d8a294a4c7c18bd282ae014efd4b9b16 Closes-Bug: #1628521
2016-10-05Merge "Move the main template files for defalut services to new syntax ↵Jenkins5-0/+0
generation"
2016-10-04Merge "j2 template role config templates"Jenkins5-183/+7
2016-10-04Move the main template files for defalut services to new syntax generationCarlos Camacho5-0/+0
When generating these templates, we should create them with the "-role" appended as they will be generated from a role.role.j2.yaml file. i.e. role.role.j2.yaml will generate <service>-role.yaml config.role.j2.yaml will generate <service>-config.yaml Partial-Bug: #1626976 Change-Id: I614dc462fd7fc088b67634d489d8e7b68e7d4ab1
2016-10-04Include redis/mongo hiera when using pacemakerDan Prince2-2/+2
This patch updates the pacemaker composable service templates for mongo and redis to extend the proper base (redis.yaml and mongo.yaml) templates instead of the -base.yaml versions. This was causing some missing hiera settings for these services which caused symptoms like missing firewall rules for these services. Change-Id: I3f94acbf4d1baadbb151b1c4d34b4a0ab28ad5e5 Partial-bug: #1629934
2016-10-04Merge "Use netapp_host_type instead of netapp_eseries_host_type"Jenkins1-4/+14
2016-10-04Merge "Make keystone api network hiera composable"Jenkins1-20/+0
2016-10-03Merge "reload HAProxy config in HA setups when certificate is updated"Jenkins1-4/+2
2016-10-03Merge "Cinder volume service is not managed by Pacemaker on BlockStorage"Jenkins2-1/+1
2016-10-03reload HAProxy config in HA setups when certificate is updatedJuan Antonio Osorio Robles1-4/+2
When updating a certificate for HAProxy, we only do a reload of the configuration on non-HA setups. This means that if we try the same in an HA setup, the cloud will still serve the old certificate and that leads to several issues, such as serving a revoked or even a compromised certificate for some time, or just SSL issues that the certificate doesn't match. This enables a reload for HA cases too. Change-Id: Ib8ca2fe91be345ef4324fc8265c45df8108add7a Closes-Bug: #1629886
2016-10-03Merge "Balance Rabbitmq Queue Master Location on queue declaration with ↵Jenkins1-0/+1
min-masters strategy"
2016-10-01Change rabbitmq queues HA mode from ha-all to ha-exactlyMichele Baldessari1-0/+9
It turns out that reducing number of rabbitmq queues in cluster significantly improves performance of cluster especially in the case of failover recovery time. Right now the cluster uses ha-all mode for rabbitmq queues. It is best to change this to "ha-exactly" mode and reduce the number of queue copies to ceil(N/2) where N is number of controllers in the cluster - so in typical scenario of 3 controller It would be 2 by default. It does not make much sense to keep the copies of queues over whole cluster since if the quorum of nodes is lost then the rest of cluster nodes will be stopped anyway. We let the user override this with a parameter. I.e. for a 3 node controlplane cluster we will go from this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"all"}" To this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"exactly","ha-params":2}" According to Marin Krcmarik's testing recovery time from failure was reduced significantly. Partial-Bug: #1628998 Change-Id: Iace6daf27a76cb8ef1050ada0de7ff1f530916c6
2016-09-30Merge "telemetry: remove coordination_url hiera settings"Jenkins3-25/+1
2016-09-30Merge "Telemetry: add redis_password hiera parameter"Jenkins3-0/+3
2016-09-30Merge "Replace per role manifests with a common role manifest"Jenkins10-101/+37
2016-09-30Make keystone api network hiera composableSteven Hardy1-20/+0
These hard-coded references to the Controller role mean that things won't work if the keystone service is moved to any other role, so we need to generate the lists dynamically based on the enabled services for each role. Change-Id: I5f1250a8a1a38cb3909feeb7d4c1000fd0fabd14 Closes-Bug: #1629096
2016-09-30j2 template role config templatesSteven Hardy5-183/+7
This means the user won't have to manually specify e.g the OS::TripleO::ACustomRoleConfig resource manually. Partial-Bug: 1626976 Change-Id: I063571d4c5cbc2f295a7a044d81c27d703bd0e10 Depends-On: I9f920e191344040a564214f3f9a1147b265e9ff3
2016-09-30Replace per role manifests with a common role manifestSteven Hardy10-101/+37
This removes the (nearly empty) per role manifests, and replaces them with a generic manifest, where we use str_replace to substitute the role name at runtime (or in some cases a subset of the name for backwards compatibility) Change-Id: I79da0f523189959b783bbcbb3b0f37be778e02fe Partial-Bug: #1626976
2016-09-30telemetry: remove coordination_url hiera settingsEmilien Macchi3-25/+1
They are now normalized and set in puppet-tripleo. Change-Id: I197481c577b85894178e7899a55869da47847755 Closes-Bug: #1629279 Depends-On: Ic6de09acf0d36ca90cc2041c0add1bc2b4a369a5
2016-09-30Telemetry: add redis_password hiera parameterEmilien Macchi3-0/+3
Add redis_password parameter in Hiera so we can re-use it from puppet-tripleo later for Aodh, Ceilometer and Gnocchi. Change-Id: I038e2bac22e3bfa5047d2e76e23cff664546464d Partial-Bug: #1629279
2016-09-30Merge "Add option to specify Certmonger CA"Jenkins1-0/+8
2016-09-30Merge "Move the rest of static roles resource registry entries to j2"Jenkins3-0/+0
2016-09-29Add option to specify Certmonger CAJuan Antonio Osorio Robles1-0/+8
This will be used for internal (or even public) TLS, for when certmonger is generating the certificates. This same setting is used for the undercloud with the generate_service_certificate option. Change-Id: Ic54fe512b9ed5c71417a66491b7954e653f660b6
2016-09-29Balance Rabbitmq Queue Master Location on queue declaration with min-masters ↵Michele Baldessari1-0/+1
strategy It may happen that one of the controllers may become unavailable and Queue Masters will be located on available controllers during queue declarations. Once a lost controller will be become available masters of newly declared queues are not placed with priority to such controller with obviously lower number of queue masters and thus the distribution may be unbalanced and one of the controllers may become under significantly higher load in some circumstances of multiple fail-overs. With rabbit 3.6.0 rabbitmq introduced a new HA feature of Queue masters distribution - one of the strategies is min-masters, which picks the node hosting the minimum number of masters. One of the ways how to turn such min-masters strategy on is by adding following into configuration file - rabbitmq.config {rabbit,[ .. {queue_master_locator, <<"min-masters">>}, .. ]}, Change-Id: I61bcab0e93027282b62f2a97bec87cbb0a6e6551 Closes-Bug: #1629010
2016-09-29Add parameters to run nova over httpdJuan Antonio Osorio Robles1-0/+18
This adds the necessary hieradata to run nova over httpd instead of eventlet. Change-Id: I57fb20cf0d58b3376243ba4aeb04e995e7152ce3
2016-09-29Cinder volume service is not managed by Pacemaker on BlockStorageGiulio Fidente2-1/+1
We do not want cinder-volume to be managed by Pacemaker on BlockStorage nodes, where Pacemaker is not running at all. This change adds a new BlockStorageCinderVolume service name which can (and is, by default) mapped to the non Pacemaker implementation of the service. The error was: Could not find dependency Exec[wait-for-settle] for Pacemaker::Resource::Systemd[openstack-cinder-volume] Also moves cinder::host setting into the Pacemaker specific service definition because we only want to set a shared host= string when the service is managed by Pacemaker. Closes-Bug: #1628912 Change-Id: I2f7e82db4fdfd5f161e44d65d17893c3e19a89c9
2016-09-29Move the rest of static roles resource registry entries to j2Carlos Camacho3-0/+0
Moving the rest of the static based resource registry entries to j2, this allows to extend the content of the template to the roles_list. Also moved the templates to correspond with the role name. Partial-Bug: #1626976 Change-Id: I1cbe101eb4ce5a89cba5f2cc45cace43d3380f22