aboutsummaryrefslogtreecommitdiffstats
path: root/puppet/services
AgeCommit message (Collapse)AuthorFilesLines
2016-10-05Set proper ceph config path for manilaTom Barron1-1/+1
When deploying manila with cephfs backend, /etc/manila/manila.conf should define cephfs_conf_path = /etc/ceph/ceph.conf in the cephfs native backend since this is the conventional path that ceph operators expect and since we document that path upstream. Change-Id: I4abf5c33b675b1102413a84d64f4ce23b07b4485 Closes-Bug: 1630777
2016-10-04Include redis/mongo hiera when using pacemakerDan Prince2-2/+2
This patch updates the pacemaker composable service templates for mongo and redis to extend the proper base (redis.yaml and mongo.yaml) templates instead of the -base.yaml versions. This was causing some missing hiera settings for these services which caused symptoms like missing firewall rules for these services. Change-Id: I3f94acbf4d1baadbb151b1c4d34b4a0ab28ad5e5 Partial-bug: #1629934
2016-10-03Merge "Cinder volume service is not managed by Pacemaker on BlockStorage"Jenkins2-1/+1
2016-10-03Merge "Balance Rabbitmq Queue Master Location on queue declaration with ↵Jenkins1-0/+1
min-masters strategy"
2016-10-01Change rabbitmq queues HA mode from ha-all to ha-exactlyMichele Baldessari1-0/+9
It turns out that reducing number of rabbitmq queues in cluster significantly improves performance of cluster especially in the case of failover recovery time. Right now the cluster uses ha-all mode for rabbitmq queues. It is best to change this to "ha-exactly" mode and reduce the number of queue copies to ceil(N/2) where N is number of controllers in the cluster - so in typical scenario of 3 controller It would be 2 by default. It does not make much sense to keep the copies of queues over whole cluster since if the quorum of nodes is lost then the rest of cluster nodes will be stopped anyway. We let the user override this with a parameter. I.e. for a 3 node controlplane cluster we will go from this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"all"}" To this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"exactly","ha-params":2}" According to Marin Krcmarik's testing recovery time from failure was reduced significantly. Partial-Bug: #1628998 Change-Id: Iace6daf27a76cb8ef1050ada0de7ff1f530916c6
2016-09-30telemetry: remove coordination_url hiera settingsEmilien Macchi3-25/+1
They are now normalized and set in puppet-tripleo. Change-Id: I197481c577b85894178e7899a55869da47847755 Closes-Bug: #1629279 Depends-On: Ic6de09acf0d36ca90cc2041c0add1bc2b4a369a5
2016-09-30Telemetry: add redis_password hiera parameterEmilien Macchi3-0/+3
Add redis_password parameter in Hiera so we can re-use it from puppet-tripleo later for Aodh, Ceilometer and Gnocchi. Change-Id: I038e2bac22e3bfa5047d2e76e23cff664546464d Partial-Bug: #1629279
2016-09-29Balance Rabbitmq Queue Master Location on queue declaration with min-masters ↵Michele Baldessari1-0/+1
strategy It may happen that one of the controllers may become unavailable and Queue Masters will be located on available controllers during queue declarations. Once a lost controller will be become available masters of newly declared queues are not placed with priority to such controller with obviously lower number of queue masters and thus the distribution may be unbalanced and one of the controllers may become under significantly higher load in some circumstances of multiple fail-overs. With rabbit 3.6.0 rabbitmq introduced a new HA feature of Queue masters distribution - one of the strategies is min-masters, which picks the node hosting the minimum number of masters. One of the ways how to turn such min-masters strategy on is by adding following into configuration file - rabbitmq.config {rabbit,[ .. {queue_master_locator, <<"min-masters">>}, .. ]}, Change-Id: I61bcab0e93027282b62f2a97bec87cbb0a6e6551 Closes-Bug: #1629010
2016-09-29Cinder volume service is not managed by Pacemaker on BlockStorageGiulio Fidente2-1/+1
We do not want cinder-volume to be managed by Pacemaker on BlockStorage nodes, where Pacemaker is not running at all. This change adds a new BlockStorageCinderVolume service name which can (and is, by default) mapped to the non Pacemaker implementation of the service. The error was: Could not find dependency Exec[wait-for-settle] for Pacemaker::Resource::Systemd[openstack-cinder-volume] Also moves cinder::host setting into the Pacemaker specific service definition because we only want to set a shared host= string when the service is managed by Pacemaker. Closes-Bug: #1628912 Change-Id: I2f7e82db4fdfd5f161e44d65d17893c3e19a89c9
2016-09-28Move db::mysql into service_config_settingsDan Prince23-105/+111
This patch movs the various db::mysql hiera settings into a 'mysql' specific service_config_settings section for each service so that these will only get applied on the MySQL service node. This follows a similar puppet-tripleo change where we create the actual databases for all services locally on the MySQL service node to avoid permission issues. Change-Id: Ic0692b1f7aa8409699630ef3924c4be98ca6ffb2 Closes-bug: #1620595 Depends-On: I05cc0afa9373429a3197c194c3e8f784ae96de5f Depends-On: I5e1ef2dc6de6f67d7c509e299855baec371f614d
2016-09-28Merge "Deprecate the NeutronL3HA parameter"Jenkins1-7/+23
2016-09-27Fix NTP servers hieradataMarius Cornea1-1/+1
This patch enables correctly setting the NTP server passed via --ntp-server in the overcloud nodes' /etc/ntp.conf. Change-Id: Iff644b9da51fb8cd1946ad9d297ba0e94d3d782b
2016-09-27Merge "Add metricd workers support in gnocchi"Jenkins1-0/+5
2016-09-27Merge "Use parameter name to configure gmcast_listen_addr"Jenkins1-0/+8
2016-09-26Set manila::keystone::auth::tenantTom Barron1-0/+1
Without setting this parameter, overcloud deploy fails and 'openstack stack failures list overcloud' reveals the following error: Error: Puppet::Type::Keystone_user_role::ProviderOpenstack: Could not find project with name [services] and domain [Default] Error: /Stage[main]/Manila::Keystone::Auth/Keystone::Resource::Service_identity[manilav2]/Keystone_user_role[manilav2@services]: Could not evaluate: undefined method `[]' for nil:NilClass When we set manila::keystone::auth::tenant to 'service', analogous to cinder, nova, etc., the overcloud deploy completes successfully. Change-Id: I996ac2ff602c632a9f9ea9c293472a6f2f92fd72
2016-09-27Merge "Add integration with Manila CephFS Native driver"Jenkins1-0/+61
2016-09-27Merge "Neutron metadata agent worker count fix"Jenkins1-3/+10
2016-09-27Merge "Remove double definition of config_settings key in keystone"Jenkins1-1/+0
2016-09-26Merge "Bind MySQL address to hostname appropriate to its network"Jenkins2-1/+14
2016-09-26Use parameter name to configure gmcast_listen_addrJuan Antonio Osorio Robles1-0/+8
This used to used mysql_bind_ip, but this parameter is quite misleading since what it actually configures is not the bind-ip itself, but the gmcast.listen_addr parameter. This fixes that confusion. Depends-On: Iea4bd67074824e5dc6732fd7e408743e693d80b3 Change-Id: I2b114600e622491ccff08a07946926734b50ac70
2016-09-26Remove double definition of config_settings key in keystoneJuan Antonio Osorio Robles1-1/+0
Change-Id: I291bfb1e5736864ea504cd82eea1d4001fcdd931
2016-09-26Bind MySQL address to hostname appropriate to its networkJuan Antonio Osorio Robles2-1/+14
This now takes into use the mysql_bind_host key, to set an appropriate fqdn for mysql to bind to. Closes-Bug: #1627060 Change-Id: I50f4082ea968d93b240b6b5541d84f27afd6e2a3 Depends-On: I316acfd514aac63b84890e20283c4ca611ccde8b
2016-09-26Add metricd workers support in gnocchiCarlos Camacho1-0/+5
Depending on the environment, gnocchi workers uses several controller resources RAM/CPU, this option makes it configurable. Also, configured to 1 in environments/low-memory-usage.yaml which will reduce the service footprint in i.e. CI Change-Id: Ia008b32151f4d8fec586cf89994ac836751b7cce Closes-bug: #1626473
2016-09-23Add integration with Manila CephFS Native driverErno Kuvaja1-0/+61
Enables configuring CephFS Native backend for Manila. This change is based on the usage of environments like in review https://review.openstack.org/#/c/354019 for Netapp driver. Co-Authored-By: Marios Andreou <marios@redhat.com> Change-Id: If013d796bcdfe48b2c995bcab462c89c360b7367 Depends-On: I918f6f23ae0bd3542bcfe1bf0c797d4e6aa8f4d9 Depends-On: I2b537f735b8d1be8f39e8c274be3872b193c1014
2016-09-23Move keystone::auth into service_config_settingsDan Prince18-101/+137
This patch moves the keystone::auth settings for all services into the new service_config_settings section. This is important because we execute the keystone commands via puppet only on the role containing the keystone service and without these settings it will fail. Note that yaql merging/filtering is used here to ensure that service_config_settings is optional in service templates, and also that we'll only deploy hieradata for a given service on a node running the service (the key in the service_config_settings map must match the service_name in the service template for this to work). e.g the following will result in only deploying keystone: 123 in hiera on the role running the "keystone" service, regardless of which service template defines it. service_config_settings: keystone: keystone: 123 Co-Authored-By: Steven Hardy <shardy@redhat.com> Change-Id: I0c2fce037a1a38772f998d582a816b4b703f8265 Closes-bug: 1620829
2016-09-23Merge "Tolerate missing keys from role_data in service templates"Jenkins1-6/+10
2016-09-23Merge "explicitly set fluentd service_provider"Jenkins1-0/+1
2016-09-23Merge "Make apache-based services use network-dependent servername"Jenkins4-1/+30
2016-09-22Neutron metadata agent worker count fixBrent Eagles1-3/+10
This patch changes the default value and type of the NeutronWorkers parameter, allowing it to be unset and let a system-dependent value to be used (e.g. processorcount or some derivate value). Change-Id: Ia385b3503fe405c4b981c451f131ac91e1af5602 Closes-Bug: #1626126
2016-09-22explicitly set fluentd service_providerLars Kellogg-Stedman1-0/+1
the konstantin-fluentd package assumes sysv init scripts, while the fluentd package in rhel(/centos/fedora) uses systemd. this can cause errors starting the service. This review explicitly sets the service_provider to "systemd". This requires https://github.com/soylent/konstantin-fluentd/pull/15, which exposes the service_provider parameter in konstantin-fluentd. Change-Id: I24332203de33f56a0e49fcc15f7fb7bb576e8752
2016-09-22Deprecate the NeutronL3HA parameterBrent Eagles1-7/+23
NeutronL3HA used to be enabled by the tripleoclient if the controller count > 1. This functionality has been moved into the relevant heat template, making the parameter less valuable for general use. If necessary, deployers can override the automatic behavior through extra config. Change-Id: Id5bb5070b9627fd545357acc9ef51bdc69d10551 Related-Bug: #1623155
2016-09-22Tolerate missing keys from role_data in service templatesSteven Hardy1-6/+10
Currently we have a few keys which may be considered optional, such as monitoring_subscription, logging* and global_config_settings. Currently we dereference these directly via get_attr, but this will break when heat output validation is fixed, ref bug #1599114 is fixed (patches are up for this, so it may be soon). Change-Id: If4eed1ca39c10ace9b1cb5ce2dc4b9c70a3dd2f4 Partial-Bug: #1620829
2016-09-21Merge "Provide for RAM-constrained environments"Jenkins1-0/+10
2016-09-21Merge "Glance worker count fix"Jenkins2-6/+20
2016-09-21Merge "Set Neutron's metadata_ip to the nova metadata VIP"Jenkins1-6/+1
2016-09-21Glance worker count fixJoe Talerico2-6/+20
This patch changes the default value and type of the Glance worker configuration to allow it to be unset and allow a system dependent default to be used (e.g. processorcount or some derivative value). The previous default of 0 would result in a single self contained process, which while suitable for debugging and testing is not appropriate for production deployments. Partial-Bug: #1626126 Change-Id: I58a6a72a581e7083e1dc4e5ca568fdd3fdd6cdf1
2016-09-21Provide for RAM-constrained environmentsJiri Stransky1-0/+10
We hit problems in environments which don't have a lot of RAM (e.g. dev envs, could be also CI) that Apache ate too much memory due to too many worker processes being spawned. This commit allows customizing the Apache MaxRequestWorkers and ServerLimit directives via Heat parameters. The default stays 256 as that's the default in the Puppet module, to be suited for production environments with powerful machines. Also low-memory-usage.yaml environment file is added, which can be used to make dev/test/CI overclouds less memory hungry, where the limits are now set to 32. Change-Id: Ibcf1d9c3326df8bb5b380066166c4ae3c4bf8d96 Co-Authored-By: Carlos Camacho <ccamacho@redhat.com> Closes-Bug: #1619205
2016-09-21Merge "Enable L3 HA when multiple controllers and no DVR"Jenkins1-3/+25
2016-09-21Make apache-based services use network-dependent servernameJuan Antonio Osorio Robles4-1/+30
Currently the servername is incorrectly set for the services running over apache. It currently takes the default value which is just the regular FQDN, when the services actually might be running on different IPs that require alternative FQDNs. This fixes that by filling that value from a fact in hiera that's dependant on the service's network. Closes-Bug: #1625677 Change-Id: Ib7ea5fd2d18a376eaa2f5a3fa5687cb9b719a8e2
2016-09-20Merge "RabbitMQ threads should be configured dynamically"Jenkins1-1/+1
2016-09-20Set Neutron's metadata_ip to the nova metadata VIPBrent Eagles1-6/+1
The neutron metadata agent's metadata_ip field is meant to refer to the nova metadata service, not the local address on the NeutronApiNetwork. Change-Id: Ibb25a80ea3e66ab3f5cf63c197460d495939778d Closes-Bug: #1625504
2016-09-20Add nova-metadata templateJuan Antonio Osorio Robles1-0/+34
This is needed because currently we're not generating nova_metadata_vip or nova_metadata_nodes_ip, and a service profile is required for that. Unfortunately, currently puppet-nova only deploys osapi and metadata through the same manifest, so this profile doesn't really inject any puppet code. We can make this more elegant later. Change-Id: Id7112111f16d0c749a6203b90e29e6d9f1e4d57e Closes-Bug: #1625543
2016-09-20RabbitMQ threads should be configured dynamicallyMichele Baldessari1-1/+1
Currently in puppet/services/rabbitmq.yaml we hardcode the thread pool size to 30 (via the +A30 snippet): rabbitmq_environment: RABBITMQ_SERVER_ERL_ARGS: '"+K true +A30 +P 1048576 -kernel inet_default_connect_options [{nodelay,true},{raw,6,18,<<5000:64/native>>}] -kernel inet_default_listen_options [{raw,6,18,<<5000:64/native>>}]"' Upstream rabbit has gained the ability to dynamically configure the number of threads since 3.6.2 via the following commit: https://github.com/rabbitmq/rabbitmq-server/commit/41ce5ad808863944cd6d62ce7f7e2271f1010582 Given that the default was hardcoded in rabbit from at least 3.4.0 up until 3.6.2 (see LP bug associated to this commit), we can actually remove this hardcoded value as it overrides a sane default. Before the change: /usr/lib64/erlang/erts-7.3.1/bin/beam.smp -W w -A 64 -K true -A30 -P 1048576 ... After the change: /usr/lib64/erlang/erts-7.3.1/bin/beam.smp -W w -A 64 -K true -P 1048576 ... So effectively with this change we will have the following: - With older rabbitmq versions we keep the +A30 default - With rabbitmq versions >= 3.6.2 the thread number is dynamically computed to nr_cpus * 16 Change-Id: I8d30c7d141c29fcc439d40fc767498520be7966e Closes-Bug: #1625486
2016-09-19Enable L3 HA when multiple controllers and no DVRBrent Eagles1-3/+25
This patch conditionally enables Neutron L3 HA if there are multiple controllers but DVR has not been enabled. If the conditions are false, the value of NeutronL3HA is used. Change-Id: If1ebeaf417c0da99d833450e394b71cabff2c800 Closes-Bug: #1623155
2016-09-19Merge "Set VNC URL parameters for nova-compute"Jenkins1-0/+3
2016-09-19Use osd_pool_default_* puppet parameters when creating the poolsGiulio Fidente1-3/+6
While it is possible to override the pg_num, pgp_num and size for each pool, the defaults are hardcoded. This patch uses as default the values given via ceph::profile::params::osd_pool_default_* parameters, if any. Closes-Bug: 1623590 Change-Id: Iecde772e7f72fd9abedb54cff4b8f2605df8fedd
2016-09-17Merge "Add fluentd client service"Jenkins56-0/+592
2016-09-17Merge "Move rabbit's clustering port away from the ephemeral port range"Jenkins1-3/+3
2016-09-17Set VNC URL parameters for nova-computeJuan Antonio Osorio Robles1-0/+3
These are needed so the computes can advertize the VNC URL correctly. Change-Id: Ic3eba9fe929ce396b584249eb84415de09ab1b62 Closes-Bug: #1623607
2016-09-17Merge "Add mongo config settings in collector service templates"Jenkins1-1/+10