Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Using the SwiftRawDisks parameter neither created the XFS filesystem nor
mounted the device, requiring manual intervention by an operaror.
Partial-Bug: 1634051
Change-Id: I2da0f12635a37c1f339a3be59a7d00f352adf283
|
|
Previously the ctrl plane VIP would default to 'br-ex' which in non-vlan
deployments ends up being the wrong interface. The public VIP interface
was also defaulted to 'br-ex' which would be incorrect for vlan based
deployments. Since a user has already given the nic template (and in
most cases the subnet that corresponds to the nic) the installer should
be able to figure out which interface the public/control vip should be
on.
These changes enable that type of auto-detection, unless a user
explicitly overrides the heat parameters for ControlVirtualInterface and
PublicVirtualInterface. Also, incorrect parameters from haproxy service
are removed.
Depends-On: I05105fce85be8ace986db351cdca2916f405ed04
Closes-Bug: 1606632
Change-Id: I3c1c39824ec32ced304a782edc6ef49c0769c108
Signed-off-by: Tim Rozet <trozet@redhat.com>
|
|
|
|
|
|
|
|
|
|
Horizon allowed hosts should name the IP addresses/
DNS names (short/long) the Horizon node is listening to.
Allowed hosts is used for header checks and is a security
mechanism.
Change-Id: I81c96357f969a1a436eecd35eb178579159bc719
|
|
|
|
|
|
We lost ability to store Glance images in NFS mounts as we moved to NG
HA architecture. This patch re-adds that ability, but the parameter
interface changes because the semantics change as well. (Pacemaker
allowed for different mounts than just NFS so the parameters were more
generic, although we only ever tested and documented NFS usage.)
Change-Id: Ic5197e09846bbf75d780dcc74da1717dcf8301d0
Related-Bug: #1635606
|
|
|
|
|
|
Change-Id: Ib25849565c617f32357ef545957f58454b2a53f8
|
|
Adds new puppet specific services for Mistral
API and Mistral Engine.
This submission enables the mistral service by default in the
overcloud, a following submission will disable it and make it
optional by enabling it on demand based in an environment file.
Depends-On: Iae42ffa37c4c9b1e070b7c3753e04c45bb97703f
Depends-On: I942d419be951651e305d01460f394870c30a9878
Depends-On: I6cb2cbf4a2abf494668d24b8c36b0d525643f0af
Implements: blueprint composable-services-within-roles
Co-Authored-By: Carlos Camacho <ccamacho@redhat.com>
Change-Id: Id5ff9cb498b5a47af38413d211ff0ed6ccd0015b
|
|
|
|
After a brand new deployment we have the following in rabbitmq.config:
...
{rabbit, [
{tcp_listen_options,
[binary,
{packet, raw},
{reuseaddr, true},
{backlog, 128},
{nodelay, true},
{exit_on_close, false}]
},
{tcp_listen_options, [binary, {packet, raw}, {reuseaddr, true},
{backlog, 128}, {nodelay, true}, {exit_on_close, false}, {keepalive,
true}]},
...
Let's remove these duplicate entries and make sure that we use the
parameters for the puppet module to set the following values
explicitely (it's the only parameter where we do not use the default
setting from the puppet module):
keepalive = true -> rabbitmq::tcp_keepalive: true
All the other options that we set are the default in the puppet module:
{packet, raw}
{reuseaddr, true}
{backlog, 128}{nodelay, true}
{exit_on_close, false}
Depends-On: I608477d5714a5081b3b4ab3b9fc2932bdd598301
Change-Id: I35921652bd84d1d6be0727051294983d4a0dde10
|
|
Port 16509 should be opened for tcp traffic to enable live migration.
See Also:
http://docs.openstack.org/admin-guide/compute-configuring-migrations.html
Previously, we were not enabling any iptables rules on the Compute
Roles, so this is a regression.
Change-Id: Ie4abf53dc2a8171af48d02e34a1a3ad43f27cfb3
Closes-Bug: #1635427
|
|
new ceilometermiddleware is available and integrated into
puppet-swift. Lets leverage it and include it in the
swift proxy pipeline. The correcponding puppet triple
change for this is Ie49f4a750368ff174b23b8d6baa743d0956d727e
Closes-Bug: #1631108
Change-Id: I82da0240d60d1eed54f1c0927e6157bb63025a19
|
|
This adds the necessary hieradata for enabling TLS in the internal
network for gnocchi.
bp tls-via-certmonger
Depends-On: Ie983933e062ac6a7f0af4d88b32634e6ce17838b
Change-Id: Iad8d4949ada8b8fd52e0d0bd345b6fb1ca65827b
|
|
This adds the necessary hieradata for enabling TLS in the internal
network for aodh.
bp tls-via-certmonger
Change-Id: I2ea160e3ac0775404d6ed302f475268d3a3031ef
Depends-On: I50ef0c8fbecb19d6597a28290daa61a91f3b13fc
|
|
This adds the necessary hieradata for enabling TLS in the internal
network for ceilometer.
bp tls-via-certmonger
Depends-On: Ib5609f77a31b17ed12baea419ecfab5d5f676496
Change-Id: I3eb34efbc8489b23269f97f762d4a3d0fa69f666
|
|
This adds an environment file that can be used to enable TLS in
the internal endpoints via certmonger if used. This will include
a nested stack that will create the hash that will be used to
create the certmonger certificates.
When setting up a service over apache via puppet, we used to disable
explicitly ssl (which sets modd_ssl-related fields for that vhost).
We now make this depend on the EnableInternalTLS flag. This has only
been done for keystone, but more services will be added as the
puppet code lands
bp tls-via-certmonger
Depends-On: I303f6cf47859284785c0cdc65284a7eb89a4e039
Change-Id: I12e794f2d4076be9505dabfe456c1ca6cfbd359c
|
|
Change-Id: I3c5c7753237ebaf16fb40806df0d195cb2b9aaa0
|
|
Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
Depends-On: If2804b469eb3ee08f3f194c7dd3290d23a245a7a
Depends-On: I091ecfbcb2e38fe77203244ac7a597aedcb558fb
Change-Id: Iacc504fc4fa2d06893917024ce2340d3fb80b626
|
|
|
|
|
|
|
|
|
|
This adds the necessary hieradata to run cinder over httpd instead
of eventlet.
Change-Id: Ic1967a6f4f60a273965811516f33121115d518b4
|
|
There is a missing repositiry for LBaaS in api_extensions_path in neutron-opencontrail.
This patch is working in my lab : tripleo liberty and opencontrail 3.0.2
Closes-Bug: #1634120
Change-Id: Ie06612faf226d0e5e75f3f8a9b560118cba5ff4c
Signed-off-by: Cyril Lopez <cylopez@redhat.com>
|
|
Without this httpd fails to start on deployments where the
worker count isn't explicitly overridden via a parameter.
Change-Id: Ie7b31bc6e022a0166af126c866994bdd019718df
Closes-Bug: #1634213
|
|
EnableOpenDaylightOnController was not very composable. Removing this
parameter to make the service truly composable. Also fixes missing
local_ip setting for OVS, required for VXLAN or GRE tenant networks.
Closes-Bug: 1633625
Depends-On: Ia55c05e12d5d434111a13e1ed795da530e3ff4a5
Change-Id: I0e07e1631793311334d1436ee8fdf9af2802ba70
Signed-off-by: Tim Rozet <trozet@redhat.com>
|
|
with the move to use httpd instead of eventlet, We now add this
parameter in t-h-t to be able to clean it up from the puppet-tripleo
manifest.
Change-Id: Ic229182cc5c887b57f6182c3db1bac8bed330f7c
Depends-On: I4603b81d30a704b07eef461b3cdbfe164614b04f
|
|
http_proxy_to_wsgi middleware was recently added to Neutron [1] and
in order to take it into use, we need to enable it via hiera.
[1] Ice9ee8f4e04050271d59858f92034c230325718b
Depends-On: I99bc9486fdd85857ce73c413e17400320bd6ec5b
Related-Bug: #1590608
Change-Id: I10c065e726f2708e09acfc04dac3cae34a534d23
|
|
glance_multiple_locations does not needed when the
NovaEnableRbdBackend=false, but it is neede when both the
image and the instance storage is rbd and
the show_image_direct_url is enabled.
The condition introduced in Ia7e0558e4f318640981abb44d188e3479b5eae69
Change-Id: Ia8a8cd9aeda69e9a7db6f95dcf418f56e29cae00
Closes-Bug: 1632285
|
|
|
|
|
|
|
|
|
|
When deploying, heat-api-cfn is assigned to RegionOne. This leads to a
bad user experience when logging into horizon, because if RegionOne is
selected by default, the users finds all menus empty (no computing, or
anything else).
Thanks to trown for finding out the issue.
Closes-Bug: 1633524
Change-Id: Ic108280f6b0875ffec10be6f696669962fb82e6b
|
|
Provider mappings were not parameterized, and this is traditionally
required for VLAN provider networks. In ODL Boron with new netvirt,
this value is required to be set in order to use external networks.
Closes-Bug: #1627898
Change-Id: I8001a4077fc7c4af458033043ea438c32c9772b0
Signed-off-by: Tim Rozet <trozet@redhat.com>
|
|
This is needed to create the user/domain/project in the
keystone profile on whatever role is running the keystone service.
Change-Id: I115ead005974080e0a35e3675d9b37828c8934b1
Closes-Bug: #1631130
Depends-On: Ib088a572b384b479f51d56555734d78ab840a1f3
|
|
DPDK core list has to be give a string. For multiple cores, it
be given as "'1,2'". But the constraint does not allow ' (single
quote) to be set in the string. Modifying the constraint pattern.
Closes-Bug: #1633433
Change-Id: Ide2194d9ef5c10e276fa1a634919dfb286e483d6
|
|
|
|
|
|
Currently Glance v2 doesn't allow to specify custom locations for
images by default, it returns 403. To enable this, the
'show_multiple_locations' param must be set to True.
Also see similar change introduced in devstack [1].
1. Id0f1c398b8b48f2ffc2488b29bc7cbd279069337
Change-Id: Ia7e0558e4f318640981abb44d188e3479b5eae69
Closes-Bug: 1632285
|
|
|
|
|
|
|