aboutsummaryrefslogtreecommitdiffstats
path: root/puppet/services
AgeCommit message (Collapse)AuthorFilesLines
2017-02-07Merge "Adds default Keystone region to regionOne Closes-Bug: #1661839"Jenkins1-0/+5
2017-02-06Merge "Remove openstack-ceilometer-api pre upgrade check"Jenkins1-3/+0
2017-02-06Merge "Remove precheck on services which run on httpd for upgrade"Jenkins2-6/+0
2017-02-06Merge "Remove old host param"Jenkins1-6/+0
2017-02-06Remove precheck on services which run on httpd for upgradeMathieu Bultel2-6/+0
Those services is not handle with systemctl Change-Id: Ia57dffd42a11070696fda14f1e91de2993e63479
2017-02-06Remove openstack-ceilometer-api pre upgrade checkMarius Cornea1-3/+0
This change removes the pre upgrade check for a running openstack-ceilometer-api service as this service doesn't exists in Newton. Ceilometer API runs under httpd: [root@overcloud-controller-0 ~]# httpd -t -D DUMP_VHOSTS | grep ceilo 10.0.0.23:8777 overcloud-controller-0.internalapi.localdomain (/etc/httpd/conf.d/10-ceilometer_wsgi.conf:6) Change-Id: I5cbf8ccf72f9071e328f52d373cf9e8edf5793f4 Closes-Bug: 1661251
2017-02-06Merge "Provide a default value for Ironic cleaning_network configuration"Jenkins1-0/+9
2017-02-04Adds default Keystone region to regionOneRamon Acedo1-0/+5
Closes-Bug: #1661839 Change-Id: I9498be04749dc866d0423e75e57d4c07eaf3e904
2017-02-03Merge "Reduce number of steps for upgrades"Jenkins2-10/+11
2017-02-03Merge "Configure VNC Server listen address through t-h-t"Jenkins1-0/+1
2017-02-03Provide a default value for Ironic cleaning_network configurationDmitry Tantsur1-0/+9
Ironic will soon refuse to start when at least some value is not provided. Unfortunately, we do not create any overcloud[*] networks during deployment. Fortunately, Ironic does not validate this value until actual cleaning. So, this change sets it to "provisioning", which is what people often use. An update will follow to the documentation to recommend this name: http://tripleo.org/advanced_deployment/baremetal_overcloud.html#configuring-cleaning A new parameter is created for this value, with a reminded to change it to an actual UUID later on. While a pre-defined name will work in a simplest case, in a real multi-tenant deployment a network name conflict is possible. Using a UUID is safer in this regard. [*] networks created in overcloud neutron Change-Id: I1b7dc2ff70d3b76f19a183a60e88cf72f6d2a318 Closes-Bug: #1661082
2017-02-03Reduce number of steps for upgradesSteven Hardy2-10/+11
We don't need all the steps currently enabled for either batched or concurrent updates, so decrease them. In future we can perhaps introspect the task tags during plan creation and set these dynamically. Change-Id: I0358886a332dfbecd03bc4a67086b08d25756c22 Partially-Implements: blueprint overcloud-upgrades-per-service
2017-02-02Remove old host paramPradeep Kilambi1-6/+0
Change-Id: Ib9e1a4ccdf447455a330687184eae471b9f3f4d4 Depends-On: I2b48d23006e38f56f04456b4556374bf0fcdb14a
2017-02-02Switch item notation to jinja formatMarius Cornea1-2/+2
This change fixes the item variable notation in puppet/services/ceph-osd.yaml. Change-Id: I4d105619e4ac913b4a711bf91fea5f6e3c9b4caa Closes-Bug: 1661339
2017-02-02Merge "Allow the override of pacemaker::corosync::settle_tries"Jenkins1-0/+7
2017-02-02Merge "Don't run ceilometer-upgrade via upgrade_tasks"Jenkins1-3/+0
2017-02-01Configure VNC Server listen address through t-h-tJuan Antonio Osorio Robles1-0/+1
This adds an entry for libvirt (which is used by the VNC server) on which we can tell it via t-h-t on which IP address to listen on. Change-Id: Ie377c09734e9f6170daa519aed69c53fc67c366b Related-Bug: #1660099
2017-02-01Don't run ceilometer-upgrade via upgrade_tasksSteven Hardy1-3/+0
This needs to be run by puppet or ansible runs it as root and the later run by puppet fails due to permissions on the logfile. Probably we need to remove the *sync calls for most services to avoid similar issues, now that we're running puppet as part of the pre-converge upgrade process but that will be done in another patch. Change-Id: I808db2c175325a25058226842684558ea06fb5c5 Partially-Implements: blueprint overcloud-upgrades-per-service
2017-01-31Add ability to toggle swift's ceilometer transport_url SSLJuan Antonio Osorio Robles1-0/+7
So, if RabbitClientUseSSL is set, this will enable TLS for the swift's ceilometer message broker connection. Change-Id: Ide70a509aefc9e7eb9d7cc5b3a60520fa42b4010 Depends-On: I8b7457b6233c4f88af2d7bc1b9304fcccb6edf61
2017-01-31Merge "Configure DPDK options to isolate PMD cores and ovs process cores"Jenkins1-1/+7
2017-01-30Merge "Add upgrade support for CephRGW service"Jenkins1-0/+11
2017-01-27Merge "Add AuditD composable service"Jenkins1-0/+34
2017-01-27Merge "Pass parameters for TLS proxy in front of neutron server"Jenkins1-1/+32
2017-01-27Merge "Remove create-legacy-resource-types opts"Jenkins1-1/+1
2017-01-27Pass parameters for TLS proxy in front of neutron serverJuan Antonio Osorio Robles1-1/+32
If TLS in the internal network is enabled, we run neutron-server behind a TLS proxy (which is actually httpd's mod_proxy). This passes the necessary hieradata. bp tls-via-certmonger Depends-On: I6dfbf49f45aef9f47e58b5c0dbedd2b4e239979e Change-Id: I9252512dbf9cf2e3eec50c41bf10629d36070bbd
2017-01-27Add AuditD composable serviceSteven Hardy1-0/+34
This patch allows the management of the AuditD service and its associated files (such as `audit.rules`) This is achieved by means of the `puppet-auditd` puppet module. Also places ssh banner capabilities map on top of patch Change-Id: Ib8bb52dde88304cb58b051bced9779c97a314d0d Depends-On: Ie31c063b674075e35e1bfa28d1fc07f3f897407b
2017-01-27Merge "Adds a pre-upgrade check that service is running (step0)"Jenkins30-1/+92
2017-01-27Merge "Adds SSH Banner text into sshd_config"Jenkins1-0/+34
2017-01-27Adds a pre-upgrade check that service is running (step0)marios30-1/+92
Adds a step0 for most services to check that the state is running before continuing with any of the other upgrades steps (these are tagged step0). You can skip this service check by overriding the SkipUpgradeConfigTags parameter as follows: parameter_defaults: SkipUpgradeConfigTags: validation Co-Authored-By: Steven Hardy <shardy@redhat.com> Change-Id: Ie276f153015f671b720b6ed5beaac1b921661909
2017-01-27Allow the override of pacemaker::corosync::settle_triesMichele Baldessari1-0/+7
When replacing a controller node, Exec['wait-for-settle'] needs to timeout, which means that the command pcs cluster auth will be executed 360 times with 10 seconds in between. So that means waiting for an hour for no reason. Let's allow to override the settle_tries counter so an operator can shorten it accordingly. Tested this by setting CorosyncSettleTries to 100 and I correctly get proper hiera settings: $ hiera pacemaker::corosync::settle_tries 100 And effectively we try a number of 100 times as opposed to the 360 default: /Stage[main]/Pacemaker::Corosync/Exec[reauthenticate-across-all-nodes]/returns (debug): Exec try 1/100 Change-Id: I5e21b4215cb0b8686d2059b3d71e2444a96719dc Closes-Bug: #1659741
2017-01-26Allow to separate Horizon from NeutronEmilien Macchi1-0/+3
Allow to deploy 2 different nodes with Neutron and another with Horizon. Horizon will get the right hieradata to collect the mechanism driver and configure the dashboard correctly. Change-Id: I24621f6a7d053cff487984bab0d10a4a97204675 Closes-Bug: 1659662
2017-01-26Merge "Add telemetry service support for composable upgrades"Jenkins13-0/+64
2017-01-26Merge "Do not try to update the 'ceph' metapackage from CephMon role"Jenkins2-1/+7
2017-01-26Remove create-legacy-resource-types optsPradeep Kilambi1-1/+1
This flag is quite old and doesnt work as expected anymore. Let ceilometer upgrade create these reource types instead. Change-Id: I71ea6e2fd9418095de658d709c14bb3006ca2753
2017-01-26Merge "Conform CephExternal template to the new hiera hook"Jenkins1-17/+17
2017-01-26Merge "Add Ceph RBD mirror Pacemaker profile"Jenkins1-0/+47
2017-01-26Merge "Allow dnsmasq_dns_servers to be configured for DHCP Agent"Jenkins1-0/+5
2017-01-26Merge "Use versionless keystone endpoint for barbican-related configurations"Jenkins1-2/+2
2017-01-26Add upgrade support for CephRGW serviceGiulio Fidente1-0/+11
Implements minor upgrade of the ceph-radosgw service. Change-Id: I4c064bf996ec6bb7eba41ab6384bd953a8ec920f Partially-Implements: blueprint overcloud-upgrades-per-service
2017-01-26Merge "Set the correct default for gnocchi workers"Jenkins1-1/+1
2017-01-26Do not try to update the 'ceph' metapackage from CephMon roleGiulio Fidente2-1/+7
The 'ceph' metapackage is only provided by some repos so we should not explicitly pull it. Also adds a validation step to the CephMon and CephOSD roles to stop upgrade if the Ceph cluster is in error state. Change-Id: I5aa275677ada47a352a327b9be21927b852d16f3
2017-01-26Merge "Add ironic service support for composable upgrades"Jenkins2-0/+11
2017-01-26Merge "Add upgrade support for ceph OSD service"Jenkins1-0/+41
2017-01-26Merge "Add upgrade support for ceph-mon service"Jenkins1-0/+21
2017-01-26Merge "Add support for batched upgrades to composable upgrades"Jenkins2-0/+27
2017-01-26Add Ceph RBD mirror Pacemaker profileGiulio Fidente1-0/+47
This change adds a profile to deploy the Ceph RBD mirroring daemon as a Pacemaker resource. Change-Id: Ib07e5bca6a45f0c6c59a3acf07f4e3ae9d2f8948 Depends-On: Ic63dc5cffece38942d305f538f71dd58a5d50789 Closes-Bug: #1652177
2017-01-26Merge "Add snmp service support for composable upgrades"Jenkins1-0/+4
2017-01-26Adds SSH Banner text into sshd_configLuke Hinds1-0/+34
Allow use of ooo template to populate banner text into /etc/issue Change-Id: If5b2da9415f10652a0a64503b2da4b63d1018640 Depends-On: Ie9f8afdfa9930428f06c9669fedb460dc1064d5e Closes-Bug: #1640306
2017-01-26Add SkipUpgradeConfigTags for upgrade configSteven Hardy1-0/+3
It may be that we want ways to selectively disable certain tasks, such as pre-flight validations that might fail when restarting an upgrade from a failed state. This shows a way we might do that. Depends-On: I18214f80be9f3ad6c2d385fc00f3b786d3e7dda3 Change-Id: Ibffaaf1de0baf47a0450daa5b7cbb57d38746556
2017-01-25Merge "Manage password_validator regex"Jenkins1-0/+10