summaryrefslogtreecommitdiffstats
path: root/puppet/services/rabbitmq.yaml
AgeCommit message (Collapse)AuthorFilesLines
2017-09-05Rabbitmq: Enable Erlang distribution TLSJuan Antonio Osorio Robles1-0/+1
This will be used for the replication traffic as specified in the dependent commit. bp tls-via-certmonger Change-Id: Ia53b9edaa6c6cdd48bcdde64969ae6c16f57ae41 Depends-On: I265c89cb8898a6da78a606664a22c50f5e57a847 (cherry picked from commit 1b4df60ac780a8388f5421c3c1634d172886595f)
2017-08-30Use integers for rabbitmq portsJuan Antonio Osorio Robles1-2/+2
They should be integers as specified in the parameter definition of the class. Else it'll fail. Change-Id: I06b6e46c0722516e28e8bff4d481fb4b7a08bd61 Closes-Bug: #1713659 (cherry picked from commit 4bea8cf918463c43c7d5f4e46984ab54271ea3e5)
2017-07-19Increase default RabbitMQ/Erlang TCP timeout from 5 to 15 secondsJohn Eckersberg1-1/+1
This should be greater than the default value of corosync_token_timeout, which is 10 seconds. That way, if an entire cluster node is unavailable, appropriate fencing measures can occur. With the current settings, it is possible for brief network interruptions, greater than 5 seconds, but less than 10 seconds, to occur. This can cause the RabbitMQ cluster to fail in subtle ways, but no corrective action taken by pacemaker. Change-Id: I735d43616c5c623c4398d924713012f595b2e5f9
2017-07-14Adds network/cidr mapping into a new service propertyGiulio Fidente1-0/+4
Makes it possible to resolve network subnets within a service template; the data is transported into a new property ServiceData wired into every service which hopefully is generic enough to be extended in the future and transport more data. Data can be consumed in service templates to set config values which need to know what is the subnet where a deamon operates (for example the Ceph Public vs Cluster network). Change-Id: I28e21c46f1ef609517175f7e7ee19e28d1c0cba2
2017-05-19Update the template_version alias for all the templates to pike.Carlos Camacho1-1/+1
Master is now the development branch for pike changing the release alias name. Change-Id: I938e4a983e361aefcaa0bd9a4226c296c5823127
2017-05-15Add role specific information to the service templateSaravanan KR1-0/+8
When a service is enabled on multiple roles, the parameters for the service will be global. This change enables an option to provide role specific parameter to services and other templates. Two new parameters - RoleName and RoleParameters, are added to the service template. RoleName provides the role name of on which the current instance of the service is being applied on. RoleParameters provides the list of parameters which are configured specific to the role in the environment file, like below: parameters_default: # Default value for applied to all roles NovaReservedHostMemory: 2048 ComputeDpdkParameters: # Applied only to ComputeDpdk role NovaReservedHostMemory: 4096 In above sample, the cluster contains 2 roles - Compute, ComputeDpdk. The values of ComputeDpdkParameters will be passed on to the templates as RoleParameters while creating the stack for ComputeDpdk role. The parameter which supports role specific configuration, should find the parameter first in in the RoleParameters list, if not found, then the default (for all roles) should be used. Implements: blueprint tripleo-derive-parameters Change-Id: I72376a803ec6b2ed93903cc0c95a6ffce718b6dc
2017-04-26Change the default for rabbitmq back to ha-mode: allMichele Baldessari1-4/+4
In change Ib62001c03e1e08f58cf0c6e0ba07a8879a584084 we switched the rabbitmq queues HA mode from ha-all to ha-exactly. While this gives us a nice performance boost with rabbitmq, it makes rabbit less resilient to network glitches as we painfully found out via https://bugzilla.redhat.com/show_bug.cgi?id=1441635. This is the THT part of the change that changes the default to ha-mode: all. Closes-Bug: #1686337 Co-Authored-By: Damien Ciabrini <dciabrin@redhat.com> Co-Authored-By: John Eckersberg <jeckersb@redhat.com> Change-Id: I7afcf2b3c8deb13fc2134e4cae9c06a44e775384 Depends-On: I9a90e71094b8d8d58b5be0a45a2979701b0ac21c
2017-03-27Rabbitmq: Use conditional instead of nested stack for TLS-specific bitsJuan Antonio Osorio Robles1-10/+27
Usually a nested stack is used that contains the TLS-everywhere bits (config_settings and metadata_settings). Nested stacks are very resource intensive. So, instead of doing using nested stacks, this patch changes that to use a conditional, and output the necessary config_settings and metadata_settings this way in an attempt to save resources. Change-Id: Ic25f84a81aefef91b3ab8db2bc864853ee82c8aa
2017-03-09Pass hieradata for internal TLS for RabbitMQJuan Antonio Osorio Robles1-46/+70
As with other services, this passes the necessary hieradata to enable TLS for RabbitMQ. This will mean (once we set it via puppet-tripleo) that there will only be TLS connections, as the ssl_only option is being used. bp tls-via-certmonger Change-Id: I960bf747cd5e3040f99b28e2fc5873ca3a7472b5 Depends-On: Ic2a7f877745a0a490ddc9315123bd1180b03c514
2017-01-20Merge "Force epmd listening to a specific address"Jenkins1-0/+1
2017-01-13Add neutron service support for composable upgradesSteven Hardy1-1/+1
Change-Id: I9c6116ddb4475b798876635cbb701214759fa33b Partially-Implements: blueprint overcloud-upgrades-per-service
2017-01-04Set rabbitmq package_provider to yumJames Slagle1-0/+1
When deploying with EnablePackageInstall:True, the rabbitmq puppet module defaults to the rpm package provider, which then tries to "rpm -i undef" since we are setting rabbitmq::package_source to undef. Instead of using the rpm provider at all, we should just use the yum provider to install whatever rabbitmq rpm's are found in enabled repos. Change-Id: I29365e675bfde676fde7a54dfc6c660c3970f50a Partially-implements: blueprint split-stack-software-configuration
2016-12-31Force epmd listening to a specific addressMichele Baldessari1-0/+1
With this change we export ERL_EPMD_ADDRESS set to the address rabbitmq is listening too. We need to explicitely export it so that epmd can pick it up and bind to the address. Closes-Bug: #1645898 Change-Id: Iacb2ee262da419f61ec3511f42b395f69f5d14da
2016-12-23Bump template version for all templates to "ocata"Steven Hardy1-1/+1
Heat now supports release name aliases, so we can replace the inconsistent mix of date related versions with one consistent version that aligns with the supported version of heat for this t-h-t branch. This should also help new users who sometimes copy/paste old templates and discover intrinsic functions in the t-h-t docs don't work because their template version is too old. Change-Id: Ib415e7290fea27447460baa280291492df197e54
2016-12-14Set rabbitmq's port and IP via the config file and not the env fileJuan Antonio Osorio Robles1-1/+3
The RabbitMQ's puppet manifest configures the node's IP and port through environment variables. While this would usually be fine, it doesn't allow us to use TLS-only, since it will always try to start a TCP listener. So, by setting these values through the config file, when setting ssl_only for rabbitmq, they will effectively be discarded and thus allow us to use an SSL listener on the same port. Change-Id: I33d051a8c740baf69b99517378e1f9b0f3cc1681
2016-12-02Merge "Revert "Use FQDN for rabbitmq's nodename env variable""Jenkins1-7/+1
2016-12-02Revert "Use FQDN for rabbitmq's nodename env variable"Ben Nemec1-7/+1
This seems to have broken the updates job, causing it to fail with following error: Can't set long node name!\nPlease check your configuration\n Related-Bug: 1646873 This reverts commit 3e9fcfd09320ace07bc1bd4cb57feb98cd057332. Change-Id: I72ba891cd9cd8c4f1bc204144f46aaabbdfd3647
2016-12-02Merge "Use FQDN for rabbitmq's nodename env variable"Jenkins1-1/+7
2016-12-01Initial support for composable upgrades with Heat+AnsibleSteven Hardy1-1/+8
This shows how we could wire in the upgrade steps using Ansible as was previously proposed e.g in https://review.openstack.org/#/c/321416/ but it's more closely integrated with the new composable services architecture. It's also very similar to the approach taken by SpinalStack where ansible snippets per-service were combined then run in a series of steps using Ansible tags. This patch just enables upgrade of keystone - we'll add support for other patches in subsequent patches. Partially-Implements: blueprint overcloud-upgrades-per-service Change-Id: I39f5426cb9da0b40bec4a7a3a4a353f69319bdf9
2016-12-01Use FQDN for rabbitmq's nodename env variableJuan Antonio Osorio Robles1-1/+7
Change-Id: Iee1afeced0b210a46b273aafc0d40e99d6ee6d4e
2016-10-21Remove double tcp_listen_options entries for rabbitMichele Baldessari1-1/+1
After a brand new deployment we have the following in rabbitmq.config: ... {rabbit, [ {tcp_listen_options, [binary, {packet, raw}, {reuseaddr, true}, {backlog, 128}, {nodelay, true}, {exit_on_close, false}] }, {tcp_listen_options, [binary, {packet, raw}, {reuseaddr, true}, {backlog, 128}, {nodelay, true}, {exit_on_close, false}, {keepalive, true}]}, ... Let's remove these duplicate entries and make sure that we use the parameters for the puppet module to set the following values explicitely (it's the only parameter where we do not use the default setting from the puppet module): keepalive = true -> rabbitmq::tcp_keepalive: true All the other options that we set are the default in the puppet module: {packet, raw} {reuseaddr, true} {backlog, 128}{nodelay, true} {exit_on_close, false} Depends-On: I608477d5714a5081b3b4ab3b9fc2932bdd598301 Change-Id: I35921652bd84d1d6be0727051294983d4a0dde10
2016-10-03Merge "Balance Rabbitmq Queue Master Location on queue declaration with ↵Jenkins1-0/+1
min-masters strategy"
2016-10-01Change rabbitmq queues HA mode from ha-all to ha-exactlyMichele Baldessari1-0/+9
It turns out that reducing number of rabbitmq queues in cluster significantly improves performance of cluster especially in the case of failover recovery time. Right now the cluster uses ha-all mode for rabbitmq queues. It is best to change this to "ha-exactly" mode and reduce the number of queue copies to ceil(N/2) where N is number of controllers in the cluster - so in typical scenario of 3 controller It would be 2 by default. It does not make much sense to keep the copies of queues over whole cluster since if the quorum of nodes is lost then the rest of cluster nodes will be stopped anyway. We let the user override this with a parameter. I.e. for a 3 node controlplane cluster we will go from this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"all"}" To this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"exactly","ha-params":2}" According to Marin Krcmarik's testing recovery time from failure was reduced significantly. Partial-Bug: #1628998 Change-Id: Iace6daf27a76cb8ef1050ada0de7ff1f530916c6
2016-09-29Balance Rabbitmq Queue Master Location on queue declaration with min-masters ↵Michele Baldessari1-0/+1
strategy It may happen that one of the controllers may become unavailable and Queue Masters will be located on available controllers during queue declarations. Once a lost controller will be become available masters of newly declared queues are not placed with priority to such controller with obviously lower number of queue masters and thus the distribution may be unbalanced and one of the controllers may become under significantly higher load in some circumstances of multiple fail-overs. With rabbit 3.6.0 rabbitmq introduced a new HA feature of Queue masters distribution - one of the strategies is min-masters, which picks the node hosting the minimum number of masters. One of the ways how to turn such min-masters strategy on is by adding following into configuration file - rabbitmq.config {rabbit,[ .. {queue_master_locator, <<"min-masters">>}, .. ]}, Change-Id: I61bcab0e93027282b62f2a97bec87cbb0a6e6551 Closes-Bug: #1629010
2016-09-20RabbitMQ threads should be configured dynamicallyMichele Baldessari1-1/+1
Currently in puppet/services/rabbitmq.yaml we hardcode the thread pool size to 30 (via the +A30 snippet): rabbitmq_environment: RABBITMQ_SERVER_ERL_ARGS: '"+K true +A30 +P 1048576 -kernel inet_default_connect_options [{nodelay,true},{raw,6,18,<<5000:64/native>>}] -kernel inet_default_listen_options [{raw,6,18,<<5000:64/native>>}]"' Upstream rabbit has gained the ability to dynamically configure the number of threads since 3.6.2 via the following commit: https://github.com/rabbitmq/rabbitmq-server/commit/41ce5ad808863944cd6d62ce7f7e2271f1010582 Given that the default was hardcoded in rabbit from at least 3.4.0 up until 3.6.2 (see LP bug associated to this commit), we can actually remove this hardcoded value as it overrides a sane default. Before the change: /usr/lib64/erlang/erts-7.3.1/bin/beam.smp -W w -A 64 -K true -A30 -P 1048576 ... After the change: /usr/lib64/erlang/erts-7.3.1/bin/beam.smp -W w -A 64 -K true -P 1048576 ... So effectively with this change we will have the following: - With older rabbitmq versions we keep the +A30 default - With rabbitmq versions >= 3.6.2 the thread number is dynamically computed to nr_cpus * 16 Change-Id: I8d30c7d141c29fcc439d40fc767498520be7966e Closes-Bug: #1625486
2016-09-16Move rabbit's clustering port away from the ephemeral port rangeMichele Baldessari1-3/+3
Currently RabbitMQ cluster uses a predefined port 35672 for clustering. This port belongs to so-called ephemeral ports range. Ephemeral ports are the ports kernel assings to application if it doesn't specify which port to open. So there is a small chance that this application being started before RabbitMQ itself could grab this port. While rather unlikely we did see this happen. Selinux change should already be in place. On my Centos 7 we have: rabbitmq_port_t tcp 25672 corenet_tcp_bind_rabbitmq_port(rabbitmq_t) corenet_tcp_connect_rabbitmq_port(rabbitmq_t) First noted via: https://bugzilla.redhat.com/show_bug.cgi?id=1357522 Closes-Bug: #1623818 Depends-On: I0bcd0d063a7a766483426fdd5ea81cbe1dfaa348 Change-Id: I995bd96c2a17614e954ea5bbae4d58998ef420dc
2016-08-31Availability monitoring agents supportMartin Mágr1-0/+4
- adds possibility to install sensu-client on all nodes - each composable service has it's own subscription Co-Authored-By: Emilien Macchi <emilien@redhat.com> Co-Authored-By: Michele Baldessari <michele@redhat.com> Implements: blueprint tripleo-opstools-availability-monitoring Change-Id: I6a215763fd0f0015285b3573305d18d0f56c7770
2016-08-23Move RabbitMQ settings out of controller.yamlDan Prince1-1/+19
This moves the config settings out of controller.yaml for RabbitMQ and into puppet/services/rabbitmq.yaml. Related-Bug: #1604414 Change-Id: I6b3d71653fb91b89b85dae7df4088afff22b71ac
2016-08-18Add DefaultPasswords to composable servicesDan Prince1-0/+3
This patch adds a new DefaultPasswords parameter to composable services. This is needed to help provide access to top level password resources that overcloud.yaml currently manages (passwords for Rabbit, Mysql, etc.). Moving the RandomString resources into composable services would cause them to regenerate within the stack. With this approach we can leave them where they are while we deprecate the top level mechanism and move the code that uses the passwords into the composable services. Change-Id: I4f21603c58a169a093962594e860933306879e3f
2016-08-18Pass ServiceNetMap to servicesGiulio Fidente1-0/+6
This will be needed to pick the network where the service has to bind to from within the service template. Change-Id: I52652e1ad8c7b360efd2c7af199e35932aaaea8c
2016-07-27Migrate Puppet Hieradata to composable servicesEmilien Macchi1-0/+15
Migrate puppet/hieradata/*.yaml parameters to puppet/services/*.yaml except for some services that are not composable yet. Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com> Change-Id: I7e5f8b18ee9aa63a1dffc6facaf88315b07d5fd7
2016-07-25Composable firewall rulesDan Prince1-0/+6
Split out the firewall rules in puppet/hieradata/controller.yaml into the composable services Depends-On: Id370362ab57347b75b1ab25afda877885b047263 Change-Id: Icaecab100d3f278035fbbb3facb9bf6c62c76c03
2016-07-22Add 'service_name' to composable servicesDan Prince1-0/+1
This patch adds a new service_name section to each composable service. We now have an explicit unit test check to ensure that service_name exists in tools/yaml-validate.py. This patch also wires service_names into hieradata on each of the roles so that tools can access the deployed services locally during deployment and upgrades. Change-Id: I60861c5aa760534db3e314bba16a13b90ea72f0c
2016-06-24Increase RabbitMQ maximum file descriptors.Chris Jones1-1/+1
We now allow 65536 open file descriptors to better reflect the real-world settings of downstream consumers of TripleO. Change-Id: Ib04ea6afb2da1a9101839d9d70bc8891d69700ec
2016-05-30Pass MysqlVirtualIP via EndpointMapGiulio Fidente1-3/+0
By passing the MysqlVirtualIP via the EndpointMap we won't need it to be provided as a parameter to the services. This follows what is already happening for the glance registry service with I9186e56cd4746a60e65dc5ac12e6595ac56505f0. Change-Id: Iad2ab389bf64d0fc8b06eb0e7d29b5370ff27dff Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
2016-05-18Deploy RabbitMQ as a composable roleEmilien Macchi1-0/+42
Change the way to implement RabbitMQ, as a composable role. Implements: blueprint refactor-puppet-manifests Change-Id: I5fed5c437ad492af75791a9163f99ae292f58895