summaryrefslogtreecommitdiffstats
path: root/puppet/services/rabbitmq.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-10-21Remove double tcp_listen_options entries for rabbitMichele Baldessari1-1/+1
After a brand new deployment we have the following in rabbitmq.config: ... {rabbit, [ {tcp_listen_options, [binary, {packet, raw}, {reuseaddr, true}, {backlog, 128}, {nodelay, true}, {exit_on_close, false}] }, {tcp_listen_options, [binary, {packet, raw}, {reuseaddr, true}, {backlog, 128}, {nodelay, true}, {exit_on_close, false}, {keepalive, true}]}, ... Let's remove these duplicate entries and make sure that we use the parameters for the puppet module to set the following values explicitely (it's the only parameter where we do not use the default setting from the puppet module): keepalive = true -> rabbitmq::tcp_keepalive: true All the other options that we set are the default in the puppet module: {packet, raw} {reuseaddr, true} {backlog, 128}{nodelay, true} {exit_on_close, false} Depends-On: I608477d5714a5081b3b4ab3b9fc2932bdd598301 Change-Id: I35921652bd84d1d6be0727051294983d4a0dde10
2016-10-03Merge "Balance Rabbitmq Queue Master Location on queue declaration with ↵Jenkins1-0/+1
min-masters strategy"
2016-10-01Change rabbitmq queues HA mode from ha-all to ha-exactlyMichele Baldessari1-0/+9
It turns out that reducing number of rabbitmq queues in cluster significantly improves performance of cluster especially in the case of failover recovery time. Right now the cluster uses ha-all mode for rabbitmq queues. It is best to change this to "ha-exactly" mode and reduce the number of queue copies to ceil(N/2) where N is number of controllers in the cluster - so in typical scenario of 3 controller It would be 2 by default. It does not make much sense to keep the copies of queues over whole cluster since if the quorum of nodes is lost then the rest of cluster nodes will be stopped anyway. We let the user override this with a parameter. I.e. for a 3 node controlplane cluster we will go from this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"all"}" To this: pcs resource show rabbitmq Resource: rabbitmq (class=ocf provider=heartbeat type=rabbitmq-cluster) Attributes: set_policy="ha-all ^(?!amq\.).* {"ha-mode":"exactly","ha-params":2}" According to Marin Krcmarik's testing recovery time from failure was reduced significantly. Partial-Bug: #1628998 Change-Id: Iace6daf27a76cb8ef1050ada0de7ff1f530916c6
2016-09-29Balance Rabbitmq Queue Master Location on queue declaration with min-masters ↵Michele Baldessari1-0/+1
strategy It may happen that one of the controllers may become unavailable and Queue Masters will be located on available controllers during queue declarations. Once a lost controller will be become available masters of newly declared queues are not placed with priority to such controller with obviously lower number of queue masters and thus the distribution may be unbalanced and one of the controllers may become under significantly higher load in some circumstances of multiple fail-overs. With rabbit 3.6.0 rabbitmq introduced a new HA feature of Queue masters distribution - one of the strategies is min-masters, which picks the node hosting the minimum number of masters. One of the ways how to turn such min-masters strategy on is by adding following into configuration file - rabbitmq.config {rabbit,[ .. {queue_master_locator, <<"min-masters">>}, .. ]}, Change-Id: I61bcab0e93027282b62f2a97bec87cbb0a6e6551 Closes-Bug: #1629010
2016-09-20RabbitMQ threads should be configured dynamicallyMichele Baldessari1-1/+1
Currently in puppet/services/rabbitmq.yaml we hardcode the thread pool size to 30 (via the +A30 snippet): rabbitmq_environment: RABBITMQ_SERVER_ERL_ARGS: '"+K true +A30 +P 1048576 -kernel inet_default_connect_options [{nodelay,true},{raw,6,18,<<5000:64/native>>}] -kernel inet_default_listen_options [{raw,6,18,<<5000:64/native>>}]"' Upstream rabbit has gained the ability to dynamically configure the number of threads since 3.6.2 via the following commit: https://github.com/rabbitmq/rabbitmq-server/commit/41ce5ad808863944cd6d62ce7f7e2271f1010582 Given that the default was hardcoded in rabbit from at least 3.4.0 up until 3.6.2 (see LP bug associated to this commit), we can actually remove this hardcoded value as it overrides a sane default. Before the change: /usr/lib64/erlang/erts-7.3.1/bin/beam.smp -W w -A 64 -K true -A30 -P 1048576 ... After the change: /usr/lib64/erlang/erts-7.3.1/bin/beam.smp -W w -A 64 -K true -P 1048576 ... So effectively with this change we will have the following: - With older rabbitmq versions we keep the +A30 default - With rabbitmq versions >= 3.6.2 the thread number is dynamically computed to nr_cpus * 16 Change-Id: I8d30c7d141c29fcc439d40fc767498520be7966e Closes-Bug: #1625486
2016-09-16Move rabbit's clustering port away from the ephemeral port rangeMichele Baldessari1-3/+3
Currently RabbitMQ cluster uses a predefined port 35672 for clustering. This port belongs to so-called ephemeral ports range. Ephemeral ports are the ports kernel assings to application if it doesn't specify which port to open. So there is a small chance that this application being started before RabbitMQ itself could grab this port. While rather unlikely we did see this happen. Selinux change should already be in place. On my Centos 7 we have: rabbitmq_port_t tcp 25672 corenet_tcp_bind_rabbitmq_port(rabbitmq_t) corenet_tcp_connect_rabbitmq_port(rabbitmq_t) First noted via: https://bugzilla.redhat.com/show_bug.cgi?id=1357522 Closes-Bug: #1623818 Depends-On: I0bcd0d063a7a766483426fdd5ea81cbe1dfaa348 Change-Id: I995bd96c2a17614e954ea5bbae4d58998ef420dc
2016-08-31Availability monitoring agents supportMartin Mágr1-0/+4
- adds possibility to install sensu-client on all nodes - each composable service has it's own subscription Co-Authored-By: Emilien Macchi <emilien@redhat.com> Co-Authored-By: Michele Baldessari <michele@redhat.com> Implements: blueprint tripleo-opstools-availability-monitoring Change-Id: I6a215763fd0f0015285b3573305d18d0f56c7770
2016-08-23Move RabbitMQ settings out of controller.yamlDan Prince1-1/+19
This moves the config settings out of controller.yaml for RabbitMQ and into puppet/services/rabbitmq.yaml. Related-Bug: #1604414 Change-Id: I6b3d71653fb91b89b85dae7df4088afff22b71ac
2016-08-18Add DefaultPasswords to composable servicesDan Prince1-0/+3
This patch adds a new DefaultPasswords parameter to composable services. This is needed to help provide access to top level password resources that overcloud.yaml currently manages (passwords for Rabbit, Mysql, etc.). Moving the RandomString resources into composable services would cause them to regenerate within the stack. With this approach we can leave them where they are while we deprecate the top level mechanism and move the code that uses the passwords into the composable services. Change-Id: I4f21603c58a169a093962594e860933306879e3f
2016-08-18Pass ServiceNetMap to servicesGiulio Fidente1-0/+6
This will be needed to pick the network where the service has to bind to from within the service template. Change-Id: I52652e1ad8c7b360efd2c7af199e35932aaaea8c
2016-07-27Migrate Puppet Hieradata to composable servicesEmilien Macchi1-0/+15
Migrate puppet/hieradata/*.yaml parameters to puppet/services/*.yaml except for some services that are not composable yet. Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com> Change-Id: I7e5f8b18ee9aa63a1dffc6facaf88315b07d5fd7
2016-07-25Composable firewall rulesDan Prince1-0/+6
Split out the firewall rules in puppet/hieradata/controller.yaml into the composable services Depends-On: Id370362ab57347b75b1ab25afda877885b047263 Change-Id: Icaecab100d3f278035fbbb3facb9bf6c62c76c03
2016-07-22Add 'service_name' to composable servicesDan Prince1-0/+1
This patch adds a new service_name section to each composable service. We now have an explicit unit test check to ensure that service_name exists in tools/yaml-validate.py. This patch also wires service_names into hieradata on each of the roles so that tools can access the deployed services locally during deployment and upgrades. Change-Id: I60861c5aa760534db3e314bba16a13b90ea72f0c
2016-06-24Increase RabbitMQ maximum file descriptors.Chris Jones1-1/+1
We now allow 65536 open file descriptors to better reflect the real-world settings of downstream consumers of TripleO. Change-Id: Ib04ea6afb2da1a9101839d9d70bc8891d69700ec
2016-05-30Pass MysqlVirtualIP via EndpointMapGiulio Fidente1-3/+0
By passing the MysqlVirtualIP via the EndpointMap we won't need it to be provided as a parameter to the services. This follows what is already happening for the glance registry service with I9186e56cd4746a60e65dc5ac12e6595ac56505f0. Change-Id: Iad2ab389bf64d0fc8b06eb0e7d29b5370ff27dff Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
2016-05-18Deploy RabbitMQ as a composable roleEmilien Macchi1-0/+42
Change the way to implement RabbitMQ, as a composable role. Implements: blueprint refactor-puppet-manifests Change-Id: I5fed5c437ad492af75791a9163f99ae292f58895