summaryrefslogtreecommitdiffstats
path: root/puppet/services/gnocchi-api.yaml
AgeCommit message (Collapse)AuthorFilesLines
2017-03-13gnocchi: deploy services with Keystone v3 endpointsEmilien Macchi1-5/+3
* Move swift_authurl to gnocchi-base hieradata, where other swift auth credentials live and switch it to versionless keystone endpoint. * Force swift_auth_version to 3 for Keystone v3. * Switch auth_uri to use versionless Keystone endpoint. * Switch auth_url to use Keystone admin endpoint (instead of internal). * Remove old parameters from gnocchi::api, not used anymore. Partial-blueprint: keystone-v3 Change-Id: I2feed8b1219069128faa1a1e8dcd2ddfbae7e40a
2017-02-28Put service stop at step1 and quiesce at step2.Sofer Athlan-Guyot1-1/+1
In the previous release[1], the services were stopped before the pacemaker services, so that they get a chance to send last message to the database/rabbitmq queue: Let's do the upgrade in the same order. [1] https://github.com/openstack/tripleo-heat-templates/blob/stable/newton/extraconfig/tasks/major_upgrade_controller_pacemaker_2.sh#L13-L71 Change-Id: I1c4045e8b9167396c9dfa4da99973102f1af1218
2017-02-14Use Keystone internal endpoint instead of admin for servicesJuan Antonio Osorio Robles1-2/+2
The admin endpoint is listening on the ctlplane network by default; services should ideally be using the internal api network for this kind of traffic, as the ctlplane network is mostly for provisioning. On the other hand, the admin endpoint shouldn't be as relevant with services switching to keystone v3. Change-Id: I1213a83ef8693c1cca1d20de974f7949a801d9f1
2017-02-10Remove gnocchi db sync from the ansible upgrade stepMathieu Bultel1-3/+0
Since gnocchi db sync for upgrade is made by puppet we need to remove it from ansible tasks Change-Id: I4a26513c3e3d0dcf77c007ea865364e38da3a94a
2017-02-06Merge "Remove precheck on services which run on httpd for upgrade"Jenkins1-3/+0
2017-02-06Remove precheck on services which run on httpd for upgradeMathieu Bultel1-3/+0
Those services is not handle with systemctl Change-Id: Ia57dffd42a11070696fda14f1e91de2993e63479
2017-02-02Remove old host paramPradeep Kilambi1-6/+0
Change-Id: Ib9e1a4ccdf447455a330687184eae471b9f3f4d4 Depends-On: I2b48d23006e38f56f04456b4556374bf0fcdb14a
2017-01-27Adds a pre-upgrade check that service is running (step0)marios1-0/+3
Adds a step0 for most services to check that the state is running before continuing with any of the other upgrades steps (these are tagged step0). You can skip this service check by overriding the SkipUpgradeConfigTags parameter as follows: parameter_defaults: SkipUpgradeConfigTags: validation Co-Authored-By: Steven Hardy <shardy@redhat.com> Change-Id: Ie276f153015f671b720b6ed5beaac1b921661909
2017-01-25Add telemetry service support for composable upgradesSteven Hardy1-0/+7
Change-Id: I62735676b45a881a7dac24171b26d88d6eb60d4a Partially-Implements: blueprint overcloud-upgrades-per-service
2017-01-25Add metadata settings for needed kerberos principalsJuan Antonio Osorio Robles1-0/+2
These are only used for TLS-everywhere, and fills up the kerberos principals that will need to be created for the certs used by the overcloud. With this, the metadata hook will format these principals correctly and will further pass them on to the nova metadata service. Where they can be used if there's a plugin enabled. bp tls-via-certmonger bp novajoin Change-Id: I873094bb69200052febda629fda698a7a782c031
2017-01-03Merge "Set gnocchi wsgi display name"Jenkins1-0/+1
2016-12-23Bump template version for all templates to "ocata"Steven Hardy1-1/+1
Heat now supports release name aliases, so we can replace the inconsistent mix of date related versions with one consistent version that aligns with the supported version of heat for this t-h-t branch. This should also help new users who sometimes copy/paste old templates and discover intrinsic functions in the t-h-t docs don't work because their template version is too old. Change-Id: Ib415e7290fea27447460baa280291492df197e54
2016-12-20Set gnocchi wsgi display namePradeep Kilambi1-0/+1
Depends-On: Ice921f0fdd4bec6de50e62c39c447ee40dc0e8f5 Change-Id: I4109ac83c32ee2365695611009579a8b117134ff
2016-12-01Use network-based fqdn entry from hiera instead of the custom factJuan Antonio Osorio Robles1-2/+2
This changes how we get the network-based FQDNs for the specific services, from using the custom fact, to the new hiera entries. Change-Id: Iae668a5d89fb7bee091db4a761aa6c91d369b276
2016-11-30Hiera optimization: use a new hiera hookDan Prince1-2/+2
This patch optimizes how we deploy hiera by using a new heat hook specifically designed to help compose hiera within heat templates. As part of this change: - we update all the 'hiera' software configurations to set the group to hiera instead of os-apply-config. - The new format uses JSON instead of YAML. The hook actually writes out the hiera JSON directly so no conversion takes place. Arrays, Strings, Booleans all stay in their native formats. As such we can avoid having to do many of the awkward string and list conversions in t-h-t to support the previous YAML formatting. - The new hook prefers JSON over YAML so upgrading users will have the new files prefered. (we will post a cleanup routine for the old files soon but this isn't a new behavior, JSON is now simply prefered.) - A lot of services required edits to account for default settings that worked in YAML that no longer work correctly in the native JSON format. In almost all these cases I think the resulting codes looks cleaner and is more explicit with regards to what is getting configured in hiera on the actual nodes. Depends-On: I6a383b1ad4ec29458569763bd3f56fd3f2bd726b Closes-bug: #1596373 Change-Id: Ibe7e2044e200e2c947223286fdf4fd5bcf98c2e1
2016-10-20Enable internal TLS for gnocchiJuan Antonio Osorio Robles1-2/+11
This adds the necessary hieradata for enabling TLS in the internal network for gnocchi. bp tls-via-certmonger Depends-On: Ie983933e062ac6a7f0af4d88b32634e6ce17838b Change-Id: Iad8d4949ada8b8fd52e0d0bd345b6fb1ca65827b
2016-10-13Enable proxy headers parsing for GnocchiJuan Antonio Osorio Robles1-0/+1
http_proxy_to_wsgi middleware was recently added to Gnocchi [1] and in order to take it into use, we need to enable it via hiera. [1] Ic5526cf37e70335fa2cc70946a271253f227f129 Related-Bug: #1590608 Change-Id: I145dcfa3455ca1541cbf6b5fc4b601f0813619c0
2016-09-28Move db::mysql into service_config_settingsDan Prince1-0/+8
This patch movs the various db::mysql hiera settings into a 'mysql' specific service_config_settings section for each service so that these will only get applied on the MySQL service node. This follows a similar puppet-tripleo change where we create the actual databases for all services locally on the MySQL service node to avoid permission issues. Change-Id: Ic0692b1f7aa8409699630ef3924c4be98ca6ffb2 Closes-bug: #1620595 Depends-On: I05cc0afa9373429a3197c194c3e8f784ae96de5f Depends-On: I5e1ef2dc6de6f67d7c509e299855baec371f614d
2016-09-23Move keystone::auth into service_config_settingsDan Prince1-6/+8
This patch moves the keystone::auth settings for all services into the new service_config_settings section. This is important because we execute the keystone commands via puppet only on the role containing the keystone service and without these settings it will fail. Note that yaql merging/filtering is used here to ensure that service_config_settings is optional in service templates, and also that we'll only deploy hieradata for a given service on a node running the service (the key in the service_config_settings map must match the service_name in the service template for this to work). e.g the following will result in only deploying keystone: 123 in hiera on the role running the "keystone" service, regardless of which service template defines it. service_config_settings: keystone: keystone: 123 Co-Authored-By: Steven Hardy <shardy@redhat.com> Change-Id: I0c2fce037a1a38772f998d582a816b4b703f8265 Closes-bug: 1620829
2016-09-21Make apache-based services use network-dependent servernameJuan Antonio Osorio Robles1-0/+6
Currently the servername is incorrectly set for the services running over apache. It currently takes the default value which is just the regular FQDN, when the services actually might be running on different IPs that require alternative FQDNs. This fixes that by filling that value from a fact in hiera that's dependant on the service's network. Closes-Bug: #1625677 Change-Id: Ib7ea5fd2d18a376eaa2f5a3fa5687cb9b719a8e2
2016-09-17Add fluentd client serviceLars Kellogg-Stedman1-0/+8
This implements support for installing fluentd agents as a composable service on the overcloud. Depends-On: I2e1abe4d8c8359e56ff626255ee50c9cacca1940 Implements: tripleo-opstools-centralized-logging Change-Id: I23b0e23881b742158fcfb6b8c145a3211d45086e
2016-08-31Availability monitoring agents supportMartin Mágr1-0/+4
- adds possibility to install sensu-client on all nodes - each composable service has it's own subscription Co-Authored-By: Emilien Macchi <emilien@redhat.com> Co-Authored-By: Michele Baldessari <michele@redhat.com> Implements: blueprint tripleo-opstools-availability-monitoring Change-Id: I6a215763fd0f0015285b3573305d18d0f56c7770
2016-08-30Mv Nova, Neutron, Horizon out of controller.yamlDan Prince1-0/+9
This patch moves the settings for Nova, Neutron, and Horizon out of controller.yaml. Also fixes the NovaPassword settings in nova-base.yaml so they don't use get_input. Also, creates a new apache.yaml base service to contain shared apache settings for several services which use Apache for WSGI. Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Change-Id: I35d909bd5abc23976b5732a2b9af31cf1448838e Related-bug: #1604414
2016-08-29Merge "Set the default gnocchi driver to swift"Jenkins1-1/+1
2016-08-25Mv ceilo, aodh, and gnocchi out of controller.yamlDan Prince1-0/+12
This patch moves the remaining hiera settings for Ceilometer, Aodh, and Gnocchi out of controller.yaml and into the respective composable services. Change-Id: I01377aa5c121ecbb4a96b4f0525924c7bbf12198 Related-bug: #1604414
2016-08-25Merge "Enable gnocchi systemd services"Jenkins1-1/+0
2016-08-24Set the default gnocchi driver to swiftPradeep Kilambi1-1/+1
Until mitaka we have been using file driver. Swift is much more scalable so lets use that instead as the default. Change-Id: Idb0d55f99dbdd9d89881ce981d489756eb508fc0
2016-08-18Enable gnocchi systemd servicesMichele Baldessari1-1/+0
Marian Krcmari noticed that on a freshly deployed HA Newton system gnocchi-metricd and gnocchi-statsd are down. This likely came about when gnocchi moved to composable roles (I40a3815923099d00a0f3fc1d88a942784e7c6fb9) and those settings made sense when it was managed by pacemaker. Also make sure that all services are disabled when managed via pacemaker and add manage_service: false for gnocchi-api for pacemaker which was missing. Change-Id: If7d681e0fa3e84379ac83c8a55b481369fe2849e
2016-08-18Add DefaultPasswords to composable servicesDan Prince1-0/+4
This patch adds a new DefaultPasswords parameter to composable services. This is needed to help provide access to top level password resources that overcloud.yaml currently manages (passwords for Rabbit, Mysql, etc.). Moving the RandomString resources into composable services would cause them to regenerate within the stack. With this approach we can leave them where they are while we deprecate the top level mechanism and move the code that uses the passwords into the composable services. Change-Id: I4f21603c58a169a093962594e860933306879e3f
2016-08-18Pass ServiceNetMap to servicesGiulio Fidente1-0/+7
This will be needed to pick the network where the service has to bind to from within the service template. Change-Id: I52652e1ad8c7b360efd2c7af199e35932aaaea8c
2016-08-16gnocchi: use new authtoken parametersEmilien Macchi1-5/+20
Configure Gnocchi with authtoken new class in the Puppet module, and also remove the useless parameters that didn't exist in the module. Change-Id: I414990c4fd5c5c1cd43d50c7a3947a4a29f4587a
2016-08-09Move gnocchi's kestone::auth parameters to API profileJuan Antonio Osorio Robles1-1/+15
In the move to composable services, these parameters are not necessary in the controller, but in the profile itself. They are not yet in use but will be used to populate the keystone endpoint. Change-Id: Iab3ab05e16872d94d3b3ab4827e2f87f4970aee3
2016-07-29Merge "Convert service_name to underscore syntax"Jenkins1-1/+1
2016-07-28Convert service_name to underscore syntaxSteven Hardy1-1/+1
Currently we use hyphens, e.g cinder-api, but in overcloud.yaml we have a lot of references to services (e.g for AllNodesConfig) by underscore, e.g cinder_api. To enable dynamic generation of this data, we need the service name in underscore format. Change-Id: Ief13dfe5d8d7691dfe2534ad5c39d7eacbcb6f70
2016-07-27Migrate Puppet Hieradata to composable servicesEmilien Macchi1-0/+1
Migrate puppet/hieradata/*.yaml parameters to puppet/services/*.yaml except for some services that are not composable yet. Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com> Change-Id: I7e5f8b18ee9aa63a1dffc6facaf88315b07d5fd7
2016-07-25Composable firewall rulesDan Prince1-0/+5
Split out the firewall rules in puppet/hieradata/controller.yaml into the composable services Depends-On: Id370362ab57347b75b1ab25afda877885b047263 Change-Id: Icaecab100d3f278035fbbb3facb9bf6c62c76c03
2016-07-22Add 'service_name' to composable servicesDan Prince1-0/+1
This patch adds a new service_name section to each composable service. We now have an explicit unit test check to ensure that service_name exists in tools/yaml-validate.py. This patch also wires service_names into hieradata on each of the roles so that tools can access the deployed services locally during deployment and upgrades. Change-Id: I60861c5aa760534db3e314bba16a13b90ea72f0c
2016-07-12Gnocchi composable rolesPradeep Kilambi1-0/+27
Implements: blueprint composable-services-within-roles Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com> Co-Authored-By: Carlos Camacho <ccamacho@redhat.com> Depends-On: Id728aae79442c45ab48fe0914c065f1807e8890d Closes-Bug: #1601846 Change-Id: I40a3815923099d00a0f3fc1d88a942784e7c6fb9