aboutsummaryrefslogtreecommitdiffstats
path: root/puppet/manifests
AgeCommit message (Collapse)AuthorFilesLines
2015-11-02Merge "Ensure memcached resource uses interleave=true"Jenkins1-1/+1
2015-11-02Merge "Support NFS backend for Glance (via Pacemaker)"Jenkins1-0/+10
2015-10-21Merge "Sync httpd vhost settings in between pcmk and non-pcmk scenarios"Jenkins2-8/+0
2015-10-19Support NFS backend for Glance (via Pacemaker)Jiri Stransky1-0/+10
Adds support for NFS backend in Glance by allowing the storage directory for the 'file' backend to be a mount managed by Pacemaker. Default behavior is unchanged. Since the Pacemaker-related parameters are not exposed on top level, change storage-environment.yaml to use parameter_defaults instead of parameters. Depends on a Heat fix for environment file's parameter_defaults to work well with JSONs and comma delimited lists (see Depends-On). Change-Id: I6e7e2eaf6919b955650c0b32e1629a4067602c89 Depends-On: I85b13a79dbc97a77e20c0d5df8eaf05b3000815e
2015-10-19Ensure memcached resource uses interleave=trueGiulio Fidente1-1/+1
Without interleave Pacemaker will consider memcached as a single unit on all nodes so it will restart dependencies on every node in case of failures. More info at: https://bugzilla.redhat.com/show_bug.cgi?id=1262425 Change-Id: I284cbf33c8453a2abefc862f3d2e0b7f11ff4c3d
2015-10-15Sync httpd vhost settings in between pcmk and non-pcmk scenariosGiulio Fidente2-8/+0
Moves the vhost_params out of the manifest and into static hiera; also removes unneeded server_alias parameter as that matched the vhost servername anyway. Change-Id: I4b5971b23ef3be9529a59075fa93ccc64af75b9c
2015-10-12Puppet / Compute: allow to run Ephemeral only storage with RBDEmilien Macchi1-2/+3
This patch allows the case where we're not running Ceph to host Persistent storage (volumes) but just to host Ephemeral storage (VMs). Before we were only allowing Ephemeral storage on Ceph when also Persistent storage was using Ceph. Change-Id: I03b775326e4424de413452f4453d4d88de0083bc
2015-10-12Merge "Ensure httpd is not enabled by puppet on system boot"Jenkins1-1/+4
2015-10-09Ensure httpd is not enabled by puppet on system bootGiulio Fidente1-1/+4
The httpd daemon will be started and managed by Pacemaker, it should not be enabled by puppet. Ideally, it shouldn't be started either but it seems it isn't possible with horizon and apache mod_wsgi [1]. 1. https://bugzilla.redhat.com/show_bug.cgi?id=1247547 Change-Id: I8a1b23c4ea27ac86385314f6cfde8c49d0879969 Co-Authored-By: marios andreou (marios@redhat.com)
2015-10-09Merge "Fix MariaDB account removal race condition"Jenkins2-7/+9
2015-10-09Merge "Rework pacemaker constraints from ovs and netns cleanup agents"Jenkins1-18/+22
2015-10-08Merge "puppet: allow to configure any ceilometer param with Hiera"Jenkins3-0/+3
2015-10-07Merge "Enable Cisco N1KV driver"Jenkins3-0/+73
2015-10-06Rework pacemaker constraints from ovs and netns cleanup agentsmarios1-18/+22
In the current neutron-* services constraints chain, the ovs and netns cleanup services are re-run after a neutron-server restart. As discussed at [1] this may not be desirable leaving some neutron services down and any tenant routers without IP. This review introduces a second constraints chain so we now have: neutron-server-->openvswitch-->dhcp-->l3-->metadata and ovs-cleanup-->netns-cleanup-->openvswitch Instead of a single chain like neutron-server-->ovs-cleanup-->netns-cleanup-->openvswitch--> dhcp-->l3-->metadata [1] https://bugzilla.redhat.com/show_bug.cgi?id=1266910#c12 Related-Bug: 1501378 Change-Id: I4096704257aff74ff5bd37d8d01d8a776c6c6a76
2015-10-05Fix MariaDB account removal race conditionJiri Stransky2-7/+9
The removal of default MariaDB accounts was being triggered roughly at the same time on all controllers, causing a race condition -- multiple nodes found an account present and attempted deletion, but then only one succeeded with the deletion, the others failed. HA controller deletes the accounts only on bootstrap node now, which fixes the issue. Change-Id: Ieacd10a6ce26da50f6a37eaa3221d866c24353fa
2015-10-02puppet: allow to configure any ceilometer param with HieraEmilien Macchi3-0/+3
By including ::ceilometer::config on controller & compute, we allow anyone to trick ceilometer.conf with any parameter, using Hiera. Change-Id: Ie6698d5e6900ecaaf7f19ed79e9c44b39ced0559
2015-10-01Write package names out to flat filesDan Prince7-2/+14
This patch updates all of the overcloud manifests so that we write out flat files containing lists of the Puppet packages which were managed by each manifest. The flat files all get written to /var/lib/puppet-tripleo/installed-packages/ where they can be easily parsed by external tools. Example format from the flat files looks like (for the controller step 1): cat /var/lib/puppet-tripleo/installed-packages/overcloud_controller1 keepalived haproxy Depends-On: If3e03b1983fed47082fac8ce63f975557dbc503c Change-Id: Ia324a08711796aa664f9c0273a051f4f2e3e92c9
2015-09-30Enable Cisco N1KV driverShiva Prasad Rao3-0/+73
This enables support for the Cisco N1kv driver for the ML2 plugin. It also configures the Nexus 1000v switch. Co-Authored-By: Steven Hillman <sthillma@cisco.com> Depends-On: I02dda0685c7df9013693db5eeacb2f47745d05b5 Depends-On: I3f14cdce9b9bf278aa9b107b2d313e1e82a20709 Change-Id: Idf23ed11a53509c00aa5fea4c87a515f42ad744f
2015-09-23Merge "Add redis ordering with ceilometer-central"Jenkins1-0/+16
2015-09-23Merge "Re-add constranits between nova-api and nova-novncproxy"Jenkins1-18/+16
2015-09-17Merge "Big Switch Neutron ML2 plugin integration"Jenkins2-0/+20
2015-09-16Merge "Set pacemaker default resource-stickiness"Jenkins1-0/+2
2015-09-16Big Switch Neutron ML2 plugin integrationJiri Stransky2-0/+20
Add support for Big Switch Neutron ML2 plugin. Makes sure that the package is present and sets up the [restproxy] section in ml2_conf.ini. This also adds support for setting the ovs_use_veth option in l3_agent.ini. There is no support for this in puppet-neutron l3 class and it probably doesn't make sense adding it there, because this setting isn't relevant for all l3 agent drivers, it's specific to OVSInterfaceDriver. The ovs_use_veth option is also added to dhcp_agent.ini. Change-Id: I99635e25b2099dacce68154fe14693d6f06ac19f
2015-09-16Merge "Enable Cisco Nexus and UCSM plugins"Jenkins2-0/+16
2015-09-16Merge "Add 4 pacemaker constraints for keystone"Jenkins1-0/+37
2015-09-15Enable Cisco Nexus and UCSM pluginsRobert Pothier2-0/+16
This enables support for the Cisco UCS Manager and Cisco Nexus plugins Change-Id: I1bc28a4768d5d6857a0504ca1f77dd71259570b8
2015-09-15Merge "Consume the NeutronMechanismDrivers from the hiera data"Jenkins2-0/+2
2015-09-10Merge "Set the nova scheduler ram_allocation_ration to 1.0"Jenkins2-0/+2
2015-09-07Don't add 'host' parameter to cinder.confDerek Higgins2-8/+0
As of I54a75652efd5e91464b84adf84004400b343c3a5 for rdb this is being done by the cinder puppet module. Change-Id: I109e139fcbb859a0d9ed99054656be94975d33b5
2015-09-02Add redis ordering with ceilometer-centralJiri Stransky1-0/+16
This is another missing constraint. The `require-all=false` part is good to have, otherwise Ceilometer (and transitively Heat) would switch to A/P mode. However, at the moment `require-all=false` isn't a recognized parameter on Fedora, hence the logic fork based on $::operatingsystem. Change-Id: I2657087192a05b2d8f0ab04ec60631d35331bf6c
2015-09-02Set pacemaker default resource-stickinessJiri Stransky1-0/+2
This is required for HA to work correctly. Change-Id: I9faa8fd7bbbac67de5c468ab6fc4edb2260dffe7 Depends-On: https://github.com/redhat-openstack/puppet-pacemaker/pull/61
2015-09-02Re-add constranits between nova-api and nova-novncproxyJiri Stransky1-18/+16
This can probably only be merged when we move CI forward from Fedora 21 to Fedora 22. Change-Id: I3a3db4b179cc19756f75003dacd2bb4cd957f0de
2015-09-02Set the nova scheduler ram_allocation_ration to 1.0Emilien Macchi2-0/+2
We don't have swap space enabled on overcloud-full deploys as discussed at https://bugs.launchpad.net/tripleo/+bug/1491335 The default is 1.5 so configure Virtual ram to physical ram allocation ratio to 1:1 so we don't allow overcommit. Related-Bug: 1491335 Change-Id: I58cfe6dc68e8615a5519428412dec8c653bd6093
2015-08-31Add 4 pacemaker constraints for keystoneJiri Stransky1-0/+37
These were missing and are required for a correct deployment. Change-Id: I49a61d0ab2f750f2620927a40f798d11b241b2c0
2015-08-25Consume the NeutronMechanismDrivers from the hiera datamarios2-0/+2
This is passed from the heat templates as hiera data (defaulting to 'openvswitch') but never effected, meaning we get the puppet module default. Change-Id: I3f14cdce9b9bf278aa9b107b2d313e1e82a20709 Closes-Bug: 1488176
2015-08-13Support for using external Ceph clustersDan Prince2-10/+24
This patch adds support for using an externally managed Ceph cluster with the TripleO Heat templates. For an externally managed Ceph cluster we initially only deploy the Ceph client tools, install the 'openstack' user keyring, and generate the ceph.conf. This matches what we do for managed Ceph installations and is a good first start. No other Ceph related services are installed or managed. To enable use of a Ceph external cluster simply add the custom Heat environment file environments/puppet-ceph-external.yaml to your heat stack create/update command and make sure to set the required CephClientKey, CephExternalMonHost, and CephClusterFSID variables. Change-Id: I0a8b213ce9dfa2fc4e62ae1e7631466e5179fc2b
2015-08-06Merge "Drive DB initialization via Hiera"Jenkins2-102/+8
2015-07-28Merge "Keystone token flushing"Jenkins2-0/+6
2015-07-24Merge "Ensure SELinux is permissive on Ceph OSDs"Jenkins3-1/+43
2015-07-24Keystone token flushingJiri Stransky2-0/+6
Set up a cron job to flush keystone tokens periodically. The job runs once a day near midnight per puppet-keystone defaults, and we pass maxdelay 3600 which means each controller will wait a random delay of up to 1 hour before running the task. Change-Id: I351f0273c61106c182aa3945b7ad1ce8f5c7d12b
2015-07-24Merge "NFS backend for Cinder"Jenkins3-2/+49
2015-07-23Use 'public' instead of 'nova' as default floating pool nameGiulio Fidente2-0/+3
The dafault in nova.conf for default_floating_pool is set to nova which is confusing given to make Tempest tests to pass one has to create a public network with such a name. Change-Id: I148222a9f276309ede062ee5292993898ff899d6
2015-07-23Merge "Provide list of memcached servers to Nova"Jenkins2-2/+6
2015-07-22Provide list of memcached servers to NovaGiulio Fidente2-2/+6
Memcached is used by novnc to share the auth tokens. Change-Id: I18415b6ae38b46e3c92e4ce84b858a014ef8398b
2015-07-21Drive DB initialization via HieraDan Prince2-102/+8
This patch moves most of the ::db::mysql parameter initialization into a new database.yaml Hiera file. This cleans up the controller manifests and allows us to define things in a single location across the two implementations (HA and nonHA). Change-Id: I895b753b329097a96a6c6f3a03a5fcebefe32dd4
2015-07-21Increase default start timeout for Pacemaker from 20s to 90sGiulio Fidente1-5/+12
On slow environments the start operation of some services can take longer than 20s so we increase the default for start operation to 90s, more info can be found at: https://bugzilla.redhat.com/show_bug.cgi?id=1242052 Systemd defaults to 90s as well. Change-Id: Ie4652bad518075be77937d47830f263034eda79c
2015-07-21Merge "Puppet: wire in tripleo::packages"Jenkins7-70/+7
2015-07-21Merge "Fix Puppet Configuring NetApp Cinder Backend"Jenkins2-6/+44
2015-07-20Puppet: wire in tripleo::packagesDan Prince7-70/+7
This wires in use of a new puppet-tripleo class which encapsulates the logic to enable/disable package installation and upgrades. By using the new class we can remove the global Package provider declaration at the top of each module. Change-Id: I5c6e5fd8600031bd8fb6195649721607c560f9d5 Depends-on: Ie8fbc344149bc8c9977e127de77636903607617a
2015-07-20Fix Puppet Configuring NetApp Cinder BackendRyan Hefner2-6/+44
It was incorrectly assumed that Puppet variables assigned to a defined class (as seen in cinder-netapp.yaml) would be applied to any resources created with that type. This is not how Puppet works. The full range of configuration parameters to cinder::backend::netapp have been added back in. They are still pulling from Hiera like they were intended before, but it needs to be a little more explicit for Puppet to be happy. Change-Id: I2e00eae829713b2dbb1e4a5f296b6d08d0c21100