aboutsummaryrefslogtreecommitdiffstats
path: root/puppet/manifests
AgeCommit message (Collapse)AuthorFilesLines
2016-04-22Run sync in step 3 when $sync_dbGiulio Fidente1-1/+1
This will configure the openstack services and run the initial db sync in step 3 (instead of step 4) for the node for which $sync_db is true. Closes-Bug: #1572952 Change-Id: I29012ee0a8b281e4472353ee7d9d44912e8a9b6c
2016-04-22Merge "Enable client address in Horizon's logs."Jenkins2-0/+2
2016-04-21composable glance servicesDan Prince2-93/+0
Adds new puppet and puppet pacemaker specific services for Glance API and Glance Registry. The Pacemaker templates extend the default glance services and swap in the pacemaker specific puppet-tripleo profile instead. In the case of pacemaker glance-registry there is no separate puppet manifest so only the configuration parameters are maintained there. (Due to the way the pacemaker glance constraints are written the pacemaker varients of this service can't be split out...) Depends-On: Ifc388f7058ccfff2818f531bcbc00c7179874bbc Change-Id: I00a8c916129af43cda225754eb10370289bb4b41
2016-04-15Enable client address in Horizon's logs.Dimitri Savineau2-0/+2
Horizon's backends (httpd) see IP address of the haproxy in the logs instead of the client address. This patch allows to: - Install the remoteip httpd module [1]. - Use the X-Forwarded-For HTTP header and override the haproxy address. - Configure the Horizon's logs with the client address via httpd logformat. [1] https://httpd.apache.org/docs/2.4/mod/mod_remoteip.html [2] https://httpd.apache.org/docs/2.4/mod/mod_log_config.html#logformat Change-Id: Ib2f215913065426848b48f6293f33a75aff3d328 Depends-On: I54f0f5549d64768dacca71539c71a28cc99d9d95
2016-04-15Merge "Make sure openstack services are dependent on openstack-core"Jenkins1-9/+27
2016-04-14Fix Neutron enable_*_agent* Hiera parametersEmilien Macchi1-1/+1
This change will fix a logic error when L3 agent was disabled, where a Pacemaker constraint (neutron-dhcp-agent-to-l3-agent-constraint) were still looking for l3_agent_service in the Puppet catalog, but could not because L3 agent was disabled. It was sending this Puppet error: Error: Could not find dependency Pacemaker::Resource::Service[neutron-l3-agent] for Pacemaker::Constraint::Base[neutron-dhcp-agent-to-l3-agent-constraint] Change-Id: I0e5d24d844810c58a3205303399d1c20773af3dd
2016-04-14Keep setting backend_host to 'hostgroup' for rbd backendsJiri Stransky2-0/+2
There are backwards incompatible patches [1][2] in puppet-cinder which break upgrade scenarios, but at this point they made it to liberty and mitaka, so workaround in t-h-t is easier than revert [1] https://review.openstack.org/#/c/209412/ [2] https://review.openstack.org/#/c/231068/ Change-Id: Ic82258bf0893ebd4e595e5df73ffbc4c6443f9e8 Closes-Bug: #1570265
2016-04-13Refactor HAproxy and VIP creation.Sofer Athlan-Guyot1-161/+24
This part in overcloud_controller_pacemaker.pp has a lot of duplicate code to define haproxy and vip creation. This is an attempt to refactor this. Change-Id: Icbd560de08999e48cfb54c6f3c94f8b96cddd6ba Depends-On: I4cc6711911c1bfa1bc6063979e2b2a7ab5b8d37b
2016-04-13Make sure openstack services are dependent on openstack-coreJiri Stransky1-9/+27
Previously ceilometer-notification, aodh-listener and sahara-engine didn't have constraints that would anchor them under openstack-core dummy resource. Such constraints are added now. (sahara-engine starting after sahara-api, aodh-listener after aodh-evaluator, and ceilometer-notification after openstack-core.) Openstack-core -> heat-api constraint has been removed because heat-api depends on ceilometer-notification, so there's a transitive dependency on openstack-core already. Change-Id: Ided7321ebbf2c3556726343b4bb466fd8759b43a Closes-Bug: #1569444
2016-04-11Deploy Gnocchi as a Ceilometer metrics storage backendPradeep Kilambi2-0/+89
* Deploy Gnocchi API. * Storage backends: swift, rbd and file. * Indexer backend default to mysql * Configure Ceilometer to send metrics datas to Gnocchi * Pacemaker config Depends-On: Ic8778a3104e0ed0460423e4bf857682220dc5802 Depends-On: I7d2eb9405e0171fc54fa0b616122f69db5f51ce2 Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: Ifde17b1ab8fa2b30544633e455e1c7eb475705aa
2016-04-09composable keystone servicesDan Prince2-129/+0
Adds new puppet and puppet pacemaker specific services for Keystone. The puppet manifests for keystone now live in puppet-tripleo. Hiera settings are driven by the nested stack heat templates and used to control puppet-keystone and puppet-tripleo directly. The Pacemaker template extends the default keystone service and swaps in the pacemaker specific puppet-tripleo profile instead. Change-Id: I8b30438a27e9d5ec4e7d335e0bd1a931a20b03a2 Depends-On: I2faf5a78db802549053ec41678bf83bf28108189
2016-04-07ha/glance-fs: avoid a race conditionEmilien Macchi1-11/+12
Create the glance-fs Pacemaker resource on one node (pacemaker master) instead of all nodes, and set verify_on_create to True. * It will avoid a race condition if Puppet is applied on 2 nodes on the same time, so the filesystem is attempted to be created once. * Verify with psc that the resource has been correctly created. The full context of the bug is decribed here: https://bugzilla.redhat.com/show_bug.cgi?id=1319384 Change-Id: I625f0879ae56e814664d1433ae47e27148779f12
2016-04-06Increase corosync token timeoutJiri Stransky1-2/+2
This might prevent dropping members from corosync cluster on high load environments. Symptoms of this problem happening can sometimes be found in corosync log: dub 05 17:23:45 overcloud-controller-0 corosync[14152]: [MAIN ] Corosync main process was not scheduled for 3691.8391 ms (threshold is 1320.0000 ms). Consider token timeout increase. The default in the Puppet manifest is 1 second, which matches the corosync default, and we override it with hiera to 10 seconds. Change-Id: I5ea850ada657e5eecafa3e8b28613a0ac48e78f3
2016-03-30Enable galera replication for Mariadb 10.1Damien Ciabrini1-0/+2
The generated galera config has to include additional settings for galera to be active on MariaDB 10.1. wsrep_on must be explicitely set to ON. On MariaDB 5.5, this was implicitely set as soon as wsrep_provider was specified. a valid wsrep_cluster_address must be configured in addition to wsrep_on, otherwise recovery command mysqld_safe --wsrep-recover cannot retrieve replication state, and cluster cannot be bootstrapped. These explicit settings are backward compatible with MariaDB 5.5 since the two variables exist in both versions of MariaDB. Change-Id: I4ab4f4eeb8679899f194399ba8695155e9a2f4a5 Closes-Bug: 1563751
2016-03-30Merge "compute: restart OVS agent on neutron.conf changes"Jenkins1-0/+10
2016-03-29compute: restart OVS agent on neutron.conf changesEmilien Macchi1-0/+10
Some options in neutron.conf are used bu OVS agent, like logging & messaging. During the upgrade process, you need to restart the agent if these options change. We could patch puppet-neutron to add a notify, but the community won't like it because Neutron OVS agent is not able to restart gracefully until [1] got merged. Until that, we can fix it in TripleO, where we suppose Puppet runs happenning during bootstraps and upgrades. Later, we'll drop this code from here and move it in puppet-neutron. [1] https://review.openstack.org/#/c/297211 Change-Id: I02b17b66e93331ddfb1a7abd8adff672bc7a32d6 Closes-Bug: #1563437
2016-03-29Merge "PLUMgrid Neutron integration"Jenkins3-3/+33
2016-03-29Merge "Increment step count to include ringbuilder"Jenkins3-18/+16
2016-03-29Don't restart Pacemaker-managed services from PuppetJiri Stransky1-0/+18
We need to reload/restart services on updates/upgrades to apply any config changes, but restarting services managed from Pacemaker from Puppet causes problems. For now we no-op the restart and rely on the catch-all restart after Puppet phase. In the future we should have a service provider for pacemaker resources that will be using pcs. We still might have to restart services outside Puppet due to cluster-wide orchestration issues, but we might be able to do the restarts selectively rather than restart everything. We also no-op the start/stop commands to be safe, as it also doesn't make sense for Puppet to try start and stop those services when it doesn't have knowledge about Pacemaker. Change-Id: I95e21e10471cd7575f28c095c48150325f1414b3 Closes-Bug: #1562922
2016-03-25Increment step count to include ringbuilderDan Prince3-18/+16
This patch wires in ringbuilder.pp so that it is always asserted like the other manifests and it fixes the misaligned step sequencing in calling our overcloud controller manifests. Previously it was called as a separate software deployment outside of the hiera step sequence. This made things confusing in controller-post.yaml since the deployment names didn't align with the step hiera variables after step 3. Now that we call it just like the other modules it should make gradually moving this code to puppet-tripleo more straightforward as well. Change-Id: Ibd4f51f65da475bb20a6b08d7bda673f330a5464
2016-03-24Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins2-1/+104
2016-03-24Merge "Remove unused user resource."Jenkins1-3/+0
2016-03-23Merge "configure horizon with memcached ipv6 when needed"Jenkins2-2/+17
2016-03-23configure horizon with memcached ipv6 when neededEmilien Macchi2-2/+17
* Add MemcachedIPv6 parameter * If MemcachedIPv6 is set at True, configure Horizon with Memcached IPv6 addresses. This patch is required to make Horizon working when running IPv6 networks. Change-Id: I752e727bfb9040b29f5d755f565fa6b54b9511c8
2016-03-23nonha: fix memcached servers string in nova.conf for ipv6Emilien Macchi1-1/+8
Full context is described here: https://review.openstack.org/#/c/270110/ The patch that was supposed to fix [1] was not fixing non-ha scenario. [1] https://launchpad.net/bugs/1536103 This patch aims to fix it. Change-Id: Iaf4608de1894ce03f35925939e83230abb9f5207 Closes-Bug: #1560063
2016-03-21Remove unused user resource.Sofer Athlan-Guyot1-3/+0
The user is created by installation of of the pacemaker package, so it's not required to add it to the resource catalog. This paves the way to merge the refeactoring of the puppet-pacemaker module[1]. It brings a lot of changes, one of them is an idempotent handling of the hacluster user's password. Removing it here prevents duplicate resource error durring puppet run. [1] https://review.openstack.org/#/c/294182/ Change-Id: I56849d9fc00bd3ce342d5c440cfe7c5b6d26b5bf
2016-03-20Deploy Aodh services, replacing Ceilometer AlarmPradeep Kilambi2-1/+104
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config * Add migration logic to remove pcs resources Depends-On: I5333faa72e52d2aa2a622ac2d4b60825aadc52b5 Depends-On: Ib6c9c4c35da3fb55e0ca8e2d5a58ebaf4204d792 Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: Ib47a22884afb032ebc1655e1a4a06bfe70249134
2016-03-18PLUMgrid Neutron integrationQasim Sarfraz3-3/+33
Enable PLUMgrid neutron liberty plugin in a TripleO overcloud environment. Change-Id: I07025f67ec3f3399aac4dcd10cc37e857772548b Signed-off-by: Qasim Sarfraz <qasims@plumgrid.com>
2016-03-16Merge "compute: use live_migration_tunnelled"Jenkins1-19/+4
2016-03-15Merge "Install mongodb client package"Jenkins2-1/+2
2016-03-15Merge "Fix typos"Jenkins1-1/+1
2016-03-14compute: use live_migration_tunnelledEmilien Macchi1-19/+4
In a previous patch [1], we added support for VIR_MIGRATE_TUNNELLED when doing VM shared storage. In Nova Mitaka [2] [3], we have now a parameter called 'live_migration_tunnelled' to whether or not use tunnelled migration. It replaces 'block_migration_flag' and 'live_migration_flag' that are both deprecated. [1] https://review.openstack.org/#/c/286584/ [2] https://review.openstack.org/#/c/263436/ [3] https://review.openstack.org/#/c/263434/ Change-Id: I8b199b6e72c80b2df7b679e0a20e39f8400d0478
2016-03-14Merge "compute: include VIR_MIGRATE_TUNNELLED when doing VM shared storage"Jenkins1-6/+28
2016-03-14Merge "Keystone domain for Heat"Jenkins2-0/+27
2016-03-10compute: include VIR_MIGRATE_TUNNELLED when doing VM shared storageEmilien Macchi1-6/+28
This patch makes sure: * When doing shared storage Nova is configured with block_migration_flag and live_migration_flag = '(...),VIR_MIGRATE_TUNNELLED' flag for security improvements. * When not doing shared storage Nova is not configured with VIR_MIGRATE_TUNNELLED flag because it's not supported by Qemu yet. We need to make sure the value is unset otherwise live migration will fail when not running shared storage for VMs. Note: this patch will be backport to stable branches. In a further iteration, we'll probably use live_migration_tunnelled new Nova parameter which is a simplier way to manage this feature. Co-Authored-By: Kashyap Chamarthy <kchamart@redhat.com> Change-Id: I557c1624ee944a32b1831d504f7b189308cd1961
2016-03-10Support the deployment of Ceph over IPv6Giulio Fidente4-2/+48
To deploy Ceph on IPv6, we need to enable ms_bind_ipv6 in addition to passing the list of MON IPs in brackets. Change-Id: I3644b8fc06458e68574afa5573f07442f0a09190
2016-03-10Allow the vnc server to bind on IPv6 address on computesMarius Cornea1-1/+8
Currently the vnc server on the compute nodes binds on 0.0.0.0. which only works with IPv4 addresses, it breaks connectivity with IPv6 addressing. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1300678. Change-Id: Id642d224fb3c62f786453dc684634adca1c2c09d Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
2016-03-10Surround MongoDB IPs with braces in the connection string if IPv6Giulio Fidente2-5/+26
Change-Id: I9ed917f32b3de95beb234ade4819a8b96affe3e9
2016-03-10Keystone domain for HeatMartin Mágr2-0/+27
This patch adds support for configuring Keystone domain for Heat via heat-keystone-setup-domain script. It should be reverted as soon as Keystone v3 is fully functional. This patch won't be fully functional without either python-keystoneclient fix [1] or workaround [2]. [1] https://bugs.launchpad.net/python-keystoneclient/+bug/1452298 [2] https://review.openstack.org/180563 Change-Id: Ie9cdd518b299c141f0fdbb3441a7761c27321a88 Co-Authored-By: Jiri Stransky <jistr@redhat.com> Depends-On: Ic541f11978908f9344e5590f3961f0d31c04bb0c
2016-03-09Merge "Add Rabbit IPv6 only support"Jenkins2-2/+21
2016-03-09Merge "Add missing createUser line to /etc/snmp/snmpd.conf"Jenkins5-5/+5
2016-03-09Add Rabbit IPv6 only supportMartin Mágr2-2/+21
Adds Rabbit environment variable required for IPv6 only support Change-Id: Iec209ca83a5b0708ac828c4afaf9d2222e597f24
2016-03-08Merge "Set host in nova.conf for compute nodes"Jenkins1-0/+4
2016-03-08Merge "Permits configuration of Cinder enabled_backend via hieradata"Jenkins3-3/+3
2016-03-08Fix typosSwapnil Kulkarni (coolsvap)1-1/+1
Multiple files in t-h-t were having small typos. Fixed in this patchset. . Change-Id: I82d7071747f47544990ed46e2be22931190406b3
2016-03-08Merge "Fixup the memcached servers string in nova.conf for v6"Jenkins1-1/+8
2016-03-07Merge "Move ordering constraints from httpd to openstack-core"Jenkins1-42/+57
2016-03-07Set host in nova.conf for compute nodesJames Slagle1-0/+4
In order for instance HA to function safely, nova-compute needs access to the name by which nova knows the current compute node. Since the names of the nova-compute and neutron ml2 agents must be the same for vif binding to work, it also sets the host value in neutron.conf. Change-Id: I7d07c57b7276815c72d08acaa86f673e43eb0498
2016-03-07Merge "Set /64 cidr_netmask for pcmk VIPs when IPv6"Jenkins1-6/+42
2016-03-07Merge "Fix rabbit_hosts list for glance-api for IPv6"Jenkins2-8/+2