aboutsummaryrefslogtreecommitdiffstats
path: root/puppet/hieradata/common.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-03-08Increase default netdev_max_backlog to 10xGiulio Fidente1-0/+2
It has been observed that on large clouds the netdev backlog buffer might overflow. This change increases the default by ten times. The /proc/net/softnet_stat file contains a counter in the 2nd column that is incremented when the netdev backlog queue overflows. If this value is incrementing over time, then netdev_max_backlog needs to be increased [1]. [1]. https://bugzilla.redhat.com/show_bug.cgi?id=1283676 Change-Id: Iec12324fd3a24e8b608b1e1849c270cc24cb0e60
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle1-3/+0
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-03Deploy Aodh services, replacing Ceilometer AlarmEmilien Macchi1-0/+3
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config Depends-On: I9e34485285829884d9c954b804e3bdd5d6e31635 Depends-On: I891985da9248a88c6ce2df1dd186881f582605ee Depends-On: Ied8ba5985f43a5c5b3be5b35a091aef6ed86572f Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: I58d419173e80d2462accf7324c987c71420fd5f6
2016-03-02Merge "Use service tenant for ceilometer"Jenkins1-3/+1
2016-02-22Update nova::network::neutron variables to drop deprecated parametersDavid Moreau Simard1-2/+2
This commit ensures we are not using any deprecated parameters for nova::network::neutron and are using the right variable names. Change-Id: Ic1b41e2cdbb6b180496822cc363c433e9388aa02
2016-02-18Add sysctl settings to disable IPv6 autoconfig and accept_raDan Sneddon1-0/+5
This change adds puppet hieradata settings which disable IPv6 autoconfiguration and accept_ra by default on all interfaces. When IPv6 is used, the interfaces are individually enabled and configured with static IP addresses. The networking on the compute host needs to be completely separate from the tenant networking, in order to safeguard the compute host and isolate tenant traffic. This change disables IPv6 autoconfiguration and acceptance of RAs by default on interfaces unless specifically enabled. Without these settings, IPv6 is enabled on all interfaces, as well as autoconfiguration and accept_ra, so when the compute host creates a bridge interface for the router (qbr-<ID>), the compute node will automatically assign an IPv6 address and will install a default IPv6 route on the bridge interface when it receives the RAs from the Neutron router. The change to turn off autoconfiguration means that interfaces will not self-assign an IPv6 address, and the change to not accept RAs is a security hardening feature. This requires that a static gateway address be declared in the network environment in the parameter ExternalNetworkDefaultRoute. Alternately, sysctl can be modified to change the accept_ra behavior for specific interfaces. Change-Id: I8a8d311a14b41baf6e7e1b8ce26a63abc2eaabef Closes-bug: 1544296
2016-02-09Increase size of connection tracking tableJames Slagle1-0/+7
During high load, the default limit of the kernel connection tracking table (65536) is often too low, resuling in error messages such as: kernel: nf_conntrack: table full, dropping packet This patch increases the limit to 500,000. Since the nf_conntrack kernel module is not always loaded by default, it also adds a mechanism to load kernel modules via hieradata using the kmod puppet module. In order to express the needed dependency in puppet that kernel modules are loaded before sysctl settings are applied, the Exec resources tagged with 'kmod::load' are specified in a resource collector to express that that Exec resources with the tag should run before Sysctl resources. Depends-On: I59cc2280ebae315af38fb5008e6ee0073195ae51 Change-Id: Iffa0a77852729786b69945c1e72bc90ad57ce3bb
2016-01-08Use service tenant for ceilometerJames Slagle1-3/+1
Configure ceilometer to use the service tenant instead of the admin tenant. Using the admin tenant is not required and a security risk. This brings the ceilometer configuration in line with the recommendations from the official installation guide: http://docs.openstack.org/kilo/install-guide/install/yum/content/ceilometer-controller-install.html Change-Id: Ia14695eb23a1ff551fd27f74b4cb864e80b100e3 Partial-Bug: #1358237
2015-12-04Making nova parameters configurable for nuage-metadata-agentRohit Pagedar1-0/+1
Exposing 'instance_name_template' to be set via extra config for nuage-metadata-agent to function Making nova::api::admin_tenant_name available on the compute node which is required by nuage-metadata-agent service Making KeystonePublicApiVirtualIP available on the compute node, which is used by the nuage-metadata-agent to build the auth-url Change-Id: I9736015e18cebf32b07940bf559063b60085f2fb
2015-11-17neutron: enable nova-event-callback by defaultEmilien Macchi1-2/+0
* Add NovaApiVirtualIP string parameter. * Compute nova_url and nova_admin_auth_url parameters. * Configure in Hiera neutron::server::notifications::* parameters. * non-ha: include ::neutron::server::notifications * ha: include ::neutron::server::notifications and create orchestration * Set vif_plugging_is_fatal to True so we actually fail if Neutron is not able to create the VIF during Nova server creation workflow. Depends-On: I21dc10396e92906eab4651c318aa2ee62a8e03c7 Change-Id: I02e41f87404e0030d488476680af2f6d45af94ff
2015-10-19nova: set catalog_info to InternalURLEmilien Macchi1-0/+2
In nova.conf, set cinder/catalog_info to 'volumev2:cinderv2:internalURL' instead of 'volumev2:cinderv2:publicURL'. So Nova will use internal Cinder endpoint to reach volume API by using internal network. Depends-On: Id9e579ca31364d5207d0c1b892d0f7aa7f20f7a8 Change-Id: Ia34f0fe59f662c3ad29ca0178c01ef1570759d57
2015-09-25Adding core_plugin, type_drivers and service_plugins parametersShiva Prasad Rao1-5/+0
Make core_plugin, type_drivers and service_plugins parameter in neutron configurable through heat. Also changing the type_drivers order to "vxlan,vlan,flat,gre" Change-Id: Iba895ed5897bdaf7bb772ffc063c424abb6e1638
2015-08-18Enable Keystone notificationsGiulio Fidente1-0/+1
This change enables Keystone notifications and adds two parameters to control the notification driver and format. Change-Id: I23ac3c46ee9eb49523d3b8dab027ef21fc6e42df
2015-07-24Merge "Set rabbitmq heatbeat timeout threshold to 60"Jenkins1-0/+6
2015-07-18Set rabbitmq heatbeat timeout threshold to 60Dan Prince1-0/+6
Updates the default settings for Nova, Neutron, Cinder, Ceilometer, and Heat services so we set the default rabbitmq threshold to 60 seconds. Change-Id: If537ae16968eb6b264b2ab071144f1eecab18b64
2015-07-17Allow overlapping IPs in NeutronJiri Stransky1-0/+1
Change-Id: I7703013b62bd67869c268fb8689389ec0eeb5aad
2015-07-13Adds the NeutronTunnelIdRanges and NeutronVniRanges parametersmarios1-5/+1
This adds the NeutronTunnelIdRanges and NeutronVniRanges parameters which govern the GRE or VXLAN tunnel IDs (respectively) that are to be made available for overcloud tenant networks. These both default to "1:1000," to retain the current behaviour. They are propagated to the hiera data for puppet deploys and there is a separate change to support passing these into the config via the neutron tripleo-image-element at https://review.openstack.org/#/c/199592/ Change-Id: I967a8cae218a31e888abc438e9de5756ae627adb Related-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1240631
2015-06-05Fix list of type_drivers for ML2 pluginGiulio Fidente1-0/+5
The list of drivers loaded by the ML2 plugin does not have to match the list of tenant_network_types, this will make ML2 load the flat, gre, vxlan and vlan drivers so that the provider networks can be of flat (default) and vlan type as well. Change-Id: I0b74f86acf5c1ff644deb46c0a1d14129c1882d4
2015-06-03Set VXLAN tunnels range to match GRE rangeGiulio Fidente1-0/+5
Change-Id: I16d259055fe4cd22541cd7abd7a26c71bbbaf292
2015-05-20Move sysctl settings into hieradataGiulio Fidente1-0/+8
This will configure the sysctl settings via puppet instead of sysctl image element. Change-Id: Ieb129d4cbe4b6d4184172631499ecd638073564f
2015-04-28Disable dhcp_domain in Nova for the overcloud as wellGiulio Fidente1-0/+1
The overcloud networking is managed by Neutron so we do not want Nova to append its default domain part to hostnames. Change-Id: Ic1edda158bf0579ed34455ad27db8ca444d26b85
2015-04-28Remove hardcoded references to .novalocal in hostnamesGiulio Fidente1-1/+0
Remove references to the .novalocal domain part in the hosts file. Change-Id: Idf14907adaf2f35440b6f28870fe18434eadd1be Depends-On: Iadfdf4120c4d1c9b6976321753957fd4eecf301c
2015-03-11Puppet: Configure neutron_api_class on controllerJiri Stransky1-0/+6
We're already configuring Neutron in Overcloud, but the controller is still configured to use the default Nova neutron_api_class for default configuration for networking, which means it used Nova Network and not Neutron. This causes some of the Nova API is_neutron checks to behave incorrectly. This patch updates the controller to use nova::network::neutron (like we already do on the overcloud_compute.pp role). As part of the change several of the compute specific hiera settings for the nova::network::neutron class have been moved to common.yaml. Change-Id: Id2d5a5a0aa1ca087de714880ef1ea98484b06849
2015-02-03Puppet: Ceilometer controller supportDan Prince1-0/+6
This patch adds support for the Ceilometer controller role including the Ceilometer: -API -central agent -alarm notifier -alarm evaluator -collector -expirer In order to enable swift metering the swift::proxy ceilometer middleware was added in. Also, a minor adjustment to the existing ceilometer HA proxy setting was made to accommodate ceilometer auth settings. (not exactly sure why but this seems to be required) Like upstream TripleO Ceilometer is currently using a MySQL database backend. A follow on patch can support configuring MongoDB for use with Ceilometer. Change-Id: I4e171274bd7679d386d93492d13dfa7c5d37f6a8
2015-01-27Puppet: Swift Overcloud Proxy/Storage supportDan Prince1-0/+1
This patch adds support for a Swift proxy and storage node on the controller. The implementation is fairly straightforward with the exception of building the ring. I've followed an upstream TripleO model here where we build the actual ring on each node (rather than build once and rsync). This works because Heat will always know all the devices ahead of time. In the future when we have Heat breakpoints it might be possible to consider optimizing this by generating the ring once and then rsyncing to all the nodes. The ringbuilder logic is executed as a seperate Heat software deployment. On the controller the ring is executed in between the base service (mysql/rabbit) and OpenStack service steps. This is to ensure the ring exists before the Swift proxy is started. Having the ringbuilder.pp logic as a separate software config should allow us to reuse it for the Storage node role. It should also be noted that swift.zones support is added here but we are missing an upstream Heat template change in order for it to be wired in properly. See: I0e0f5189da1575f2e1ed7fba4bbbe13a8fbf6221 Likewise we need to properly wire in SwiftRingBuild as well. See: I01311ec3ca265b151f8740bf7dc57cdf0cf0df6f The underlying puppet ringbuilder code is already wired to support this change when it lands. As is this works today and will provide a working Overcloud Swift-proxy/storage node config. Will follow this up with a related Swift storage node patch which should allow puppet to be used for configuration on the storage nodes as well... Change-Id: Id1272f796e2507a7357309e8cd6a51ad9e0160af
2015-01-05Puppet: overcloud compute configDan Prince1-0/+1
This patch provides an alternate implementation of the OS::TripleO::Compute::SoftwareConfig which uses Puppet to drive the configuration. Using this it is possible to create a fully functional overcloud compute instance which has the compute node configured via Puppet stackforge modules. This includes all the Nova, Neutron, and Ceilometer configuration required to make things work. In order to test this you'll want to build your images with these elements: os-net-config heat-config-puppet puppet-modules hiera None of the OpenStack specific TripleO elements should be used with this approach (the nova/neutron/ceilometer elements were NOT used to build the compute image). Also, rather than use neutron-openvswitch-agent to configure low level networking it is recommended that os-net-config by configured directly via heat modeling rather than parameter passing to init-neutron-ovs. This allows us to configure the physical network while avoiding the coupling to the neutron-openvswitch-element that our standard parameter driven networking currently uses. (We still need to move init-neutron-ovs so that it isn't coupled and/or deprecate its use entirely because the heat drive stuff is more flexible.) Packages may optionally be pre-installed via DIB using the -p option (-p openstack-neutron,openstack-nova). Change-Id: Ic36be25d70f0a94ca07ffda6e0005669b81c1ac7