summaryrefslogtreecommitdiffstats
path: root/puppet/controller.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-04-25Merge "Use 'deeper' hiera_hash merge behavior for all roles"Jenkins1-0/+1
2016-04-22Merge "Enable client address in Horizon's logs."Jenkins1-0/+6
2016-04-21Use 'deeper' hiera_hash merge behavior for all rolesGiulio Fidente1-0/+1
This change configures the hiera merge behavior to 'deeper' [1], which is useful to merge values when the same hiera key is found in multiple datafiles. The hiera default 'native' only picks the value from the key with the highest priority in the hierarchy. 1. https://docs.puppetlabs.com/hiera/1/lookup_types.html#deep-merging-in-hiera--120 Change-Id: I88c764d9af510ffbbad9fcaa4b747655e38255c2
2016-04-21composable glance servicesDan Prince1-102/+0
Adds new puppet and puppet pacemaker specific services for Glance API and Glance Registry. The Pacemaker templates extend the default glance services and swap in the pacemaker specific puppet-tripleo profile instead. In the case of pacemaker glance-registry there is no separate puppet manifest so only the configuration parameters are maintained there. (Due to the way the pacemaker glance constraints are written the pacemaker varients of this service can't be split out...) Depends-On: Ifc388f7058ccfff2818f531bcbc00c7179874bbc Change-Id: I00a8c916129af43cda225754eb10370289bb4b41
2016-04-15Enable client address in Horizon's logs.Dimitri Savineau1-0/+6
Horizon's backends (httpd) see IP address of the haproxy in the logs instead of the client address. This patch allows to: - Install the remoteip httpd module [1]. - Use the X-Forwarded-For HTTP header and override the haproxy address. - Configure the Horizon's logs with the client address via httpd logformat. [1] https://httpd.apache.org/docs/2.4/mod/mod_remoteip.html [2] https://httpd.apache.org/docs/2.4/mod/mod_log_config.html#logformat Change-Id: Ib2f215913065426848b48f6293f33a75aff3d328 Depends-On: I54f0f5549d64768dacca71539c71a28cc99d9d95
2016-04-15Make HeatWorkers param affect the engine workersJuan Antonio Osorio Robles1-0/+1
With the addition of the num_engine_workers param in puppet-heat, we can now wire the HeatWorkers parameter to also set that value, as with the other workers. Change-Id: I169b648737f797ccd45d12b66705d111e7b95bb7 Depends-On: I53a4333ca16df516294c733f85546c0b0a6a0b88
2016-04-11Deploy Gnocchi as a Ceilometer metrics storage backendPradeep Kilambi1-0/+59
* Deploy Gnocchi API. * Storage backends: swift, rbd and file. * Indexer backend default to mysql * Configure Ceilometer to send metrics datas to Gnocchi * Pacemaker config Depends-On: Ic8778a3104e0ed0460423e4bf857682220dc5802 Depends-On: I7d2eb9405e0171fc54fa0b616122f69db5f51ce2 Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: Ifde17b1ab8fa2b30544633e455e1c7eb475705aa
2016-04-11Merge "composable keystone services"Jenkins1-104/+0
2016-04-09composable keystone servicesDan Prince1-104/+0
Adds new puppet and puppet pacemaker specific services for Keystone. The puppet manifests for keystone now live in puppet-tripleo. Hiera settings are driven by the nested stack heat templates and used to control puppet-keystone and puppet-tripleo directly. The Pacemaker template extends the default keystone service and swaps in the pacemaker specific puppet-tripleo profile instead. Change-Id: I8b30438a27e9d5ec4e7d335e0bd1a931a20b03a2 Depends-On: I2faf5a78db802549053ec41678bf83bf28108189
2016-04-04Change /etc/hosts format and add domainJuan Antonio Osorio Robles1-12/+12
Right now, the service-related IPs assosiated with the machine are registered in the /etc/hosts with different hostnames. This is fine, except if you need to register that hostname in a third party service (such as FreeIPA), since the current configuration is not assigning a domain to those IP addresses. So the current implementation requires DNS to be properly working, which is not ideal for testing purposes. Since the current hostnames are not currently being used; it's still trivial to change this mapping and the format of them. instead of having entries such as: <INTERNAL IP> <node>-internalapi <STORAGE IP> <node>-storage ... in /etc/hosts; This changes the format to: <INTERNAL IP> <node>.internalapi.<domain> <node>.internalapi <STORAGE IP> <node>.storage.<domain> <node>.storage ... So the network (external, internal, storage, etc...) is now represented as a subdomain. For simplicity, the format without the domain is still available through an alias. Change-Id: I6502959a974546e5de757935acea15df6326acda
2016-03-31Configure ControllerServices via resource chainsDan Prince1-0/+6
This patch wires in a new for Mitaka Heat feature that allows us to dynamically include a set of nested stacks representing individual services via a Heat resource chain. Follow on patches will use this interface to decompose the controller role into isolated services. Co-Authored-By: Steve Hardy <shardy@redhat.com> Depends-On: If510abe260ea7852dfe2d1f7f92b529979483068 Change-Id: I84c97a76159704c2d6c963bc4b26e365764b1366
2016-03-29Merge "PLUMgrid Neutron integration"Jenkins1-0/+1
2016-03-29Merge "Add quotes around the cinder_iscsi_ip_address value"Jenkins1-1/+5
2016-03-24Remove password default for AodhPasswordPradeep Kilambi1-1/+0
Change-Id: Ibf37bfd6150d212fadcc4d2e2e2d0a89cdd76c91
2016-03-24Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins1-0/+28
2016-03-24Add quotes around the cinder_iscsi_ip_address valueGiulio Fidente1-1/+5
In I783e939ae304385674909bfd9f1cac95e04cef22 we add brackets around the cinder_iscsi_ip_address if IPv6 but that causes hiera to try mapping the value into an array, while it isn't. This change adds quotes around the brackets. Change-Id: Id9bb4b12542f1943e9df702486d68424539c7a59 Closes-Bug: 1560934
2016-03-24Wire redis_password to the tripleo moduleGiulio Fidente1-0/+1
Without this the HAProxy monitoring for Redis would fail to poll the backends. Change-Id: Id0826c6b04e471844c7bef69480af263cf2b3bd4
2016-03-24Merge "Pass iSCSI bind address in brackets to Cinder when IPv6"Jenkins1-1/+1
2016-03-23configure horizon with memcached ipv6 when neededEmilien Macchi1-0/+6
* Add MemcachedIPv6 parameter * If MemcachedIPv6 is set at True, configure Horizon with Memcached IPv6 addresses. This patch is required to make Horizon working when running IPv6 networks. Change-Id: I752e727bfb9040b29f5d755f565fa6b54b9511c8
2016-03-23Pass iSCSI bind address in brackets to Cinder when IPv6Giulio Fidente1-1/+1
Configure the Cinder iscsi_ip_address key using brackets when the IP address is of v6 class. Closes-Bug: 1560934 Change-Id: I783e939ae304385674909bfd9f1cac95e04cef22
2016-03-22Fix redis coordination urlPradeep Kilambi1-3/+4
The coordination url connection string to redis is incorrectly formatted with password. More details: https://bugzilla.redhat.com/show_bug.cgi?id=1320036 Change-Id: I93f5e93dfce4ba2629aa57534e8d33d5d1e6d77b
2016-03-21Merge "Allow option to disable Swift ring management"Jenkins1-4/+6
2016-03-21Merge "Wire in HAProxy stats user and password"Jenkins1-0/+11
2016-03-21Allow option to disable Swift ring managementChristian Schwede1-4/+6
There are quite a few cases where it is useful to disable ring building on the nodes. For example: - using different weights, regions, and zones - replacing a node in an existing Swift cluster - adding a new node to an existing cluster - using storage policies and therefore multiple rings - using different nodes and disks for account, container and object servers This patch allows it to disable ring building. Rings need to be maintained manually then, and copied to all storage and proxy nodes within a cluster. This patch is similar to I01311ec3ca265b151f8740bf7dc57cdf0cf0df6f, except that it uses the current templates. Change-Id: I56978b15823dd6eaf4b6fd3440df2f895e89611a
2016-03-20Deploy Aodh services, replacing Ceilometer AlarmPradeep Kilambi1-0/+28
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config * Add migration logic to remove pcs resources Depends-On: I5333faa72e52d2aa2a622ac2d4b60825aadc52b5 Depends-On: Ib6c9c4c35da3fb55e0ca8e2d5a58ebaf4204d792 Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: Ib47a22884afb032ebc1655e1a4a06bfe70249134
2016-03-18PLUMgrid Neutron integrationQasim Sarfraz1-0/+1
Enable PLUMgrid neutron liberty plugin in a TripleO overcloud environment. Change-Id: I07025f67ec3f3399aac4dcd10cc37e857772548b Signed-off-by: Qasim Sarfraz <qasims@plumgrid.com>
2016-03-18Merge "Remove default for the RabbitMQ password"Jenkins1-1/+0
2016-03-18Remove default for the RabbitMQ passwordJuan Antonio Osorio Robles1-1/+0
Since the password is now autogenerated from the tripleoclient, there is no need to keep the default value here. Change-Id: If41cb56134966456f8590da04f392faffe5c62a1 Closes-Bug: #1557688
2016-03-17Merge "Remove forced rabbitmq::file_limit conversion to string"Jenkins1-8/+1
2016-03-15Merge "Ensure access to Redis is password protected"Jenkins1-1/+10
2016-03-14Merge "Keystone domain for Heat"Jenkins1-1/+3
2016-03-11Merge "Pass public_addr to ceph::profile::params instead of ceph::mon"Jenkins1-1/+1
2016-03-10Keystone domain for HeatMartin Mágr1-1/+3
This patch adds support for configuring Keystone domain for Heat via heat-keystone-setup-domain script. It should be reverted as soon as Keystone v3 is fully functional. This patch won't be fully functional without either python-keystoneclient fix [1] or workaround [2]. [1] https://bugs.launchpad.net/python-keystoneclient/+bug/1452298 [2] https://review.openstack.org/180563 Change-Id: Ie9cdd518b299c141f0fdbb3441a7761c27321a88 Co-Authored-By: Jiri Stransky <jistr@redhat.com> Depends-On: Ic541f11978908f9344e5590f3961f0d31c04bb0c
2016-03-09Wire in HAProxy stats user and passwordBen Nemec1-0/+11
Change-Id: I26b7a1cd1b7b6520db1df49c60a86c2bb5bce1b0 Depends-On: I12e835964a0370de73e45ef0a8603656ecb02d0c Depends-On: I8a5844e89bd81a99d5101ab6bce7a8d79e069565
2016-03-09Ensure access to Redis is password protectedGiulio Fidente1-1/+10
Depends-On: I1a8741b9e00775763911222cbe0af677b59e03a1 Change-Id: I373f97ada4e4101700a12b42dfb8ee4b2ff701f2
2016-03-09Remove forced rabbitmq::file_limit conversion to stringJiri Stransky1-8/+1
Combined with a fix in puppetlabs-rabbitmq, we can lift the forced conversion of rabbitmq::file_limit into a string in Hiera. See the referenced puppetlabs-rabbitmq pull request for explanation of the issue. Change-Id: I0ec720b5e06763e86ea93f59cfe05842b3d13269 Depends-On: https://github.com/puppetlabs/puppetlabs-rabbitmq/pull/401
2016-03-09Merge "Add Rabbit IPv6 only support"Jenkins1-0/+6
2016-03-09Merge "Change the CinderISCSIHelper to lioadm"Jenkins1-1/+1
2016-03-09Add Rabbit IPv6 only supportMartin Mágr1-0/+6
Adds Rabbit environment variable required for IPv6 only support Change-Id: Iec209ca83a5b0708ac828c4afaf9d2222e597f24
2016-03-08Change the CinderISCSIHelper to lioadmGiulio Fidente1-1/+1
Previously we used to always set CinderISCSIHelper to lioadm from the client. With [1] we aim at cleaning up the client from any default so this change move the actual default into the templates. 1. Iabc94ad1cce6f1744429aca9f866a59a698f5680 Change-Id: I662e4b0e3cf909ec2583d087ca1d246715caf0f7 Related-Bug: 1554564
2016-03-08Store events in CeilometerRichard Su1-0/+6
Adds an option to toggle whether events are stored in Ceilometer. The default is false and remains unchanged. Change-Id: I9accb679b97cf7172c67f3cd5f218bdaee507c94 Related-Bug: rhbz#1312373
2016-03-07Merge "Allow to enable IPv6 on Corosync"Jenkins1-0/+6
2016-03-07Merge "Use MysqlVirtualIPUri for nova_api and sahara database"Jenkins1-2/+2
2016-03-07Merge "Revert "Deploy Aodh services, replacing Ceilometer Alarm""Jenkins1-28/+0
2016-03-07Fixup swift device string to delimit the ipv6 address with []marios1-2/+2
The swift device string is formatted in the outputs of the controller template and swift-storage templates. For ipv6 we need to delimit the address with [] as discussed in https://bugzilla.redhat.com/show_bug.cgi?id=1296701#c0 Change-Id: Ie611d62c3668a65a7be52777a613d265682c6a8b Co-Authored-By: Jiri Stransky <jistr@redhat.com> Closes-Bug: 1534135
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle1-28/+0
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-05Allow to enable IPv6 on CorosyncEmilien Macchi1-0/+6
To enable IPv6 in Corosync, you'll need to set the --ipv6 parameter when building the cluster. To do so, we need to specify this parameter in puppet configuration when running ::pacemaker::corosync class. So we have now a new parameter: CorosyncIPv6 which is a boolean, False by default. If set to True, it will pass right options to enable IPv6 when building the Pacemaker cluster. Change-Id: I485f1399964ddd7a201ed19ec6580b8a136b3acd
2016-03-05Use MysqlVirtualIPUri for nova_api and sahara databaseGiulio Fidente1-2/+2
Without this the nova_api and sahara database_connection string won't add brackets around the IP address, when IPv6, causing db sync to fail. Change-Id: I262e5de993ae59ad665edb043119aac2e09c6fdc
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon1-11/+39
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-04Allow for usage of pre-allocated IPs for the management networkSteven Hardy1-0/+2
Id3d4f12235501ae77200430a2dc022f378dce336 added support for pre-allocated IPs on the other overlay networks, but because the patch adding the managment network (I0813a13f60a4f797be04b34258a2cffa9ea7e84f) was under review around the same time, we missed adding the from_pool capability to the ManagementNetwork. Change-Id: If99f37634d5da7e7fb7cfc31232e926bd5ff074a