| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit ensures we are not using any deprecated parameters for
nova::network::neutron and are using the right variable names.
Change-Id: Ic1b41e2cdbb6b180496822cc363c433e9388aa02
|
|
This change adds the TripleO Heat Parameters and Puppet hieradata
to support setting the MTU for Neutron tenant networks. A new
parameter, NeutronTenantMtu is introduced, and this gets used for
the NeutronDnsmasqOptions and in Puppet hieradata.
NeutronTenantMtu is also used in the Puppet hieradata for both the
compute and control nodes. Two values are set:
nova::compute::network_device_mtu
which sets /etc/nova/nova.conf: network_device_mtu = <NeutronTenantMtu>
neutron::network_device_mtu
which sets in /etc/neutron/neutron.conf:
network_device_mtu = <NeutronTenantMtu>
finally, the NeutronDnsmasqOptions parameter becomes a str_format
that maps the NeutronTenantMtu onto the DHCP options,
so a default of 'dhcp-option-force=26,%MTU%' would be formatted to
'dhcp-option-force=26,1300' if NeutronTenantMtu were 1300.
This will set dnsmasq to serve an MTU via DHCP that matches the
NeutronTenantMtu:
/etc/neutron/dnsmasq-neutron.conf:dhcp-option-force=26,1300
Typically, you would change all three of these settings to use small
or jumbo frames in VMs. When using tunneling, NeutronTenantMtu
should be set at least 50 bytes smaller than the physical network
MTU in order to make room for tunneling overhead.
Note that this change does not support setting the MTU on veth
interfaces if veth patches are used to br-int instead of OVS
patches.
Change-Id: I38840e082ee01dc3b6fc78e1dd97f53fa4e63039
|
|
|
|
|
|
There was a missing : in the hieradata for the compute nodes that
caused tunnel_types to not be configured. This also made it
impossible to boot instances on tunneled networks because the port
binding always failed.
Change-Id: Icc2a45aa9514ce62497f91e6abe9261d1c1374ed
Partial-Bug: 1534349
|
|
|
|
|
|
This change adds support for setting the configuration options required
to enable the quality of service feature in Neutron. The default values
will enable the feature.
Closes-Bug: #1524052
Depends-On: Iefc289a6eee13b9c66f8131c258af982f232df4b
Change-Id: I1abf7d37d39e6927e482b56de4ee3d3d7c313a1c
|
|
|
|
Adds a TimeZone parameter for node types and the top level
stack. Defaults to UTC.
Change-Id: I98123d894ce429c34744233fe3e631cbdd7c12b5
Depends-On: Icf7c681f359e3e48b653ea4648db6a73b532d45e
|
|
|
|
|
|
|
|
|
|
|
|
Deploy a TripleO overcloud with networking midonet. MidoNet is a
monolithic plugin and quite changes on the puppet manifest must be done.
Depends-On: I72f21036fda795b54312a7d39f04c30bbf16c41b
Depends-On: I6f1ac659297b8cf6671e11ad23284f8f543568b0
Depends-On: Icea9bd96e4c80a26b9e813d383f84099c736d7bf
Change-Id: I9692e2ef566ea37e0235a6059b1ae1ceeb9725ba
|
|
This change allows every overcloud node to optionally participate in
any of the isolated networks. The optional networks are not enabled
by default, but allow additional flexibility. Since the new networks
are not enabled by default, the standared deployment is unchanged.
This change was originally requested for OpenDaylight support.
There are several use cases for using non-standard networks.
For instance, one example might be adding the Internal API network
to the Ceph nodes, in order to use that network for administrative
functions. Another example would be adding the Storage Management
network to the compute nodes, in order to use it for backup. Without
this change, any deviation from the standard set of roles that use a
network is a custom change to the Heat templates, which makes
upgrades much more difficult.
Change-Id: Ia386c964aa0ef79e457821d8d96ebb8ac2847231
|
|
This change adds a system management network to all overcloud
nodes. The purpose of this network is for system administration,
for access to infrastructure services like DNS or NTP, or for
monitoring. This allows the management network to be placed on a
bond for redundancy, or for the system management network to be
an out-of-band network with no routing in or out. The management
network might also be configured as a default route instead of the
provisioning 'ctlplane' network.
This change does not enable the management network by default. An
environment file named network-management.yaml may be included to
enable the network and ports for each role. The included NIC config
templates have been updated with a block that may be uncommented
when the management network is enabled.
This change also contains some minor cleanup to the NIC templates,
particularly the multiple nic templates.
Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
|
|
This aligns the parameter default values from python-tripleoclient
with tripleo-heat-templates. This is in preparation for removing
all the defaults from the client, and maintaining them only in the
templates.
Change-Id: I7b635a250f1ecc170e18d8e434f0118c6fcbb942
Co-Authored-By: James Slagle <jslagle@redhat.com>
|
|
Without modification we cannot scale to more than 1000 networks.
Neutron will send this message to the user:
"Unable to create the network. No tenant network is available for
allocation."
Change-Id: I5ecbc66a0b6aaa5edbe2669eed9caadfb0691511
|
|
Wires the following as arrays to the neutron module:
- mechanism_drivers
- flat_networks
- tenant_network_types
- tunnel_types
- bridge_mappings
Also updates the template version to use a Liberty feature which
allows serialization of comma_delimited_list into JSON.
Tidies up the manifests by removing the class declarations since
config is passed by the puppet/controller+compute hiera mapped_data.
Change-Id: Ie9f85fb827099f897ef750e267bc3ed3a864fe59
Co-Authored-By: Steven Hardy <shardy@redhat.com>
|
|
|
|
This change adds a SoftwareConfigTransport parameter to role templates
so that the transport can be changed via a parameter_defaults entry.
This change will have no effect on an existing overcloud as the current
default POLL_SERVER_CFN is now explicit in the parameter default.
Change-Id: I5c2a2d2170714093c5757282cba12ac65f8738a4
|
|
The parameters have nothing to do with EC2 keypairs, they are used to
specify Nova SSH key pairs.
Change-Id: Ia8d37cb5c443812d02133747cb54fcaf0110d091
|
|
There are two reasons the name property should always be set for deployment
resources:
- The name often shows up in logs, files and API calls, the default
derived name is long and unhelpful
- Sorting by name determines the merge order of os-apply-config, and the
execution order of puppet/shell scripts (note this is different to
resource dependency order) so leaving the default name results in an
undetermined order which could lead to unpredictable deployment of
configs
This change simply sets the name to the resource name, but a future change
should prepend each name with a run-parts style 2 digit prefix so that the
order is explicitly stated. Documentation for extraconfig needs to clearly
state what prefix is needed to override which merge/execution order.
For existing overcloud stacks, heat currently replaces deployment resources
when the name changes, so this change
Depends-On: I95037191915ccd32b2efb72203b146897a4edbc9
Change-Id: Ic4bcd56aa65b981275c3d4214588bfc4de63b3b0
|
|
All of our sensitive parameters are defaulted to easily predictable
values, which is very bad from a security perspective because we don't
force clients to make sane choices thus risk deploying with the
predictable default values. tripleoclient supports generating random
values for all of these, so remove the defaults, for non-tripleoclient
usage we can create a developer-only environment with defaults.
Related-Bug: #1516027
Change-Id: Ia0cf3b7e2de1aa42cf179cba195fb7770a1fc21c
Depends-On: Ifb34b43fdedc55ad220df358c3ccc31e3c2e7c14
|
|
This adds a parameter for each role, where optional scheduler hints
may be passed to nova. One potential use-case for this is using
the ComputeCapabilities to pin deployment to a specific node (not
just a specific role/profile mapping to a pool of nodes like we
have currently documented in the ahc-match docs).
This could work as follows:
1. Tag a specific node as "node:controller-0" in Ironic:
ironic node-update <id> replace properties/capabilities='node:controller-0,boot_option:local'
2. Create a heat environment file which uses %index%
parameters:
ControllerSchedulerHints:
'capabilities:node': 'controller-%index%'
Change-Id: I79251dde719b4bb5c3b0cce90d0c9d1581ae66f2
|
|
|
|
Exposing 'instance_name_template' to be set via
extra config for nuage-metadata-agent to function
Making nova::api::admin_tenant_name
available on the compute node which is
required by nuage-metadata-agent service
Making KeystonePublicApiVirtualIP available
on the compute node, which is used by the
nuage-metadata-agent to build the auth-url
Change-Id: I9736015e18cebf32b07940bf559063b60085f2fb
|
|
Some Nova hooks might require custom properties/metadata set for the
servers deployed in the overcloud, and this would enable us to inject
such information.
For FreeIPA (IdM) integration, there is effectively a Nova hook that
requires such data.
Currently this inserts metadata for all servers, but a subsequent CR
will introduce per-role metadata. However, that was not added to this
because it will require the usage of map_merge. which will block those
changes to be backported. However, this one is not a problem in that
sense.
Change-Id: I98b15406525eda8dff704360d443590260430ff0
|
|
|
|
|
|
Introduce configuration of the nodes' domains through a parameter.
Change-Id: Ie012f9f2a402b0333bebecb5b59565c26a654297
|
|
Added ExtraConfig templates and environment files for Nuage specific parameters.
Modified overcloud_compute.pp and overcloud_controller.pp to conditionally
include Nuage plugin and agents.
Change-Id: I95510c753b0a262c73566481f9e94279970f4a4f
|
|
This commit enables the injection of a trust anchor or root
certificate into every node in the overcloud. This is in case that the
TLS certificates for the controllers are signed with a self-signed CA
or if the deployer would like to inject a relevant root certificate
for other purposes. In this case the other nodes might need to have
the root certificate in their trust chain in order to do proper
validation
Change-Id: Ia45180fe0bb979cf12d19f039dbfd22e26fb4856
|
|
We don't necessarily want the network configuration to be reapplied
with every template update so we add a param to configure on which
action the NetworkDeployment resource should be executed.
Change-Id: I0e86318eb5521e540cc567ce9d77e1060086d48b
Co-Authored-By: Dan Sneddon <dsneddon@redhat.com>
Co-Authored-By: James Slagle <jslagle@redhat.com>
Co-Authored-By: Jiri Stransky <jstransk@redhat.com>
Co-Authored-By: Steven Hardy <shardy@redhat.com>
|
|
Made libvirt_vif_driver, ovs_bridge and security_group_api parameters
in nova as configurable parameters through heat templates
Change-Id: I3f355c31a64912baa1a159d59f0fa9089f77b8f4
|
|
|
|
This change adds support for enabling/disabling L2 population in
Neutron agents. It currently defaults to false.
Change-Id: I3dd19feb4acb1046bc560b35e5a7a111364ea0d7
|
|
|
|
|
|
|
|
Because many of the service endpoints URLs use the same patterns for
generating the URLs it makes sense to use the same templates to reduce
the copy and paste.
In the process also adds support for explicitly specifying hostnames
for use in the endpoints. Note: DNS must be pre-configured. The
Heat templates do not directly configure DNS.
Change-Id: Ie3270909beca3d63f2d7e4bcb04c559380ddc54d
Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
|
|
Currently rabbit username and password are defaulted and attempting
to use anything else would result in a failure during deployment.
Change-Id: I8a2e240a19f915309eee45ea3c3368d131af6c1b
Related: rhbz#1261303
|
|
|
|
This commits aims to allow a user to specify several ntp servers and not
just one.
Example:
openstack overcloud deploy --templates --ntp-server
0.centos.pool.org,1.centos.pool.org
Change-Id: I4925ef1cf1e565d789981e609c88a07b6e9b28de
|
|
This patch allows the case where we're not running Ceph to host Persistent
storage (volumes) but just to host Ephemeral storage (VMs).
Before we were only allowing Ephemeral storage on Ceph when also
Persistent storage was using Ceph.
Change-Id: I03b775326e4424de413452f4453d4d88de0083bc
|
|
Change-Id: Ieb27729c6b33ffc849d07200ec0d42508214956e
Closes-Bug: #1399793
|
|
|
|
|
David Moreau Simard
Dan Sneddon
Jenkins
Ben Nemec
Brent Eagles
Nico Auv
Jaume Devesa
Giulio Fidente
Joe Talerico
Steve Baker
Steven Hardy
Rohit Pagedar
Juan Antonio Osorio Robles
Lokesh Jain
Mark Chappell
Mike Burns
Yanis Guenane
Emilien Macchi