summaryrefslogtreecommitdiffstats
path: root/puppet/cinder-storage.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-08-09Merge "Remove static hieradata"Jenkins1-1/+0
2016-08-09Merge "Move *Flavor parameters into per-role templates"Jenkins1-1/+2
2016-08-08Remove static hieradataEmilien Macchi1-1/+0
Static hieradata moved to composable services, we don't need the files anymore. It also cleanup how we construct Hieradata configuration by removing unused hiera files. Change-Id: I19f85b6c1b734473cf908ddaca29ad966f9f5405
2016-08-05Add Aodh composable rolesPradeep Kilambi1-3/+0
Implements: blueprint composable-services-within-roles Depends-On: Ie48a123cc5bc402aee635a5daf118b158c6f3b6a Closes-Bug: #1601850 Change-Id: Ifcfe0e3937fa8577635d803d46c3dfc2e873e553
2016-07-27Move *Flavor parameters into per-role templatesSteven Hardy1-1/+2
We have some inconsistent naming here, but move them with their current names for backwards compatibility, we can address the deprecation of the inconsistent names at a future time. This is required to enable jinja templating of roles in overcloud.yaml Change-Id: I2ea673d9bc52967f9b7c25555059b964abf66966 Partially-Implements: blueprint custom-roles
2016-07-27Move *Image parameters into role templatesSteven Hardy1-3/+5
We've got some inconsistent naming here, but I'm not attempting to fix that yet, only move the current parameters inside each role template. This should be backwards compatible because the parameter names don't change, but also enable progress on custom-roles. We can figure out a strategy for deprecating these and aligning per-role parameter naming in a subsequent patch. Also moves ImageUpdatePolicy, which wasn't consistently passed to all roles anyway, and aligns the default image and constraints for each role. Change-Id: I85ec979934df220acbab9f7c3a6055f23e3bfc29 Partially-Implements: blueprint custom-roles
2016-07-27Move per-role *SchedulerHints parameters into role templatesSteven Hardy1-2/+2
To enable custom roles, move these into the role templates where they can be passed via parameter defaults. Because the Compute role uses an inconsistent NovaCompute naming, these parameters cannot be generated in overcloud.yaml, so moving them enables backwards compatibility to be maintained when we move to a fully jinja generated overcloud (e.g including the role ResourceGroup resources) Change-Id: I3f9b2275f2b1daeb8b83f09548a089dadcfe9eee Partially-Implements: blueprint custom-roles
2016-07-22Add 'service_name' to composable servicesDan Prince1-0/+7
This patch adds a new service_name section to each composable service. We now have an explicit unit test check to ensure that service_name exists in tools/yaml-validate.py. This patch also wires service_names into hieradata on each of the roles so that tools can access the deployed services locally during deployment and upgrades. Change-Id: I60861c5aa760534db3e314bba16a13b90ea72f0c
2016-07-12Merge "Combine BootstrapNodeDeployment with AllNodesDeployment"Jenkins1-0/+6
2016-07-11Use already Deployed/Installed serversJames Slagle1-1/+1
This patch provides a set of templates that enables tripleo-heat-templates to be used with a set of already deployed, installed, and running servers. In this method, Nova and Ironic are not used to deploy any servers. This approach is attractive for POC deployments where dedicated provisioning networks are not available, or other server install methods are dictated for various reasons. There are also assumptions that currently have to be made about the software installed on the already deployed servers. Effectively, they must match the standard TripleO overcloud-full image. Co-Authored-By: Steve Hardy <shardy@redhat.com> Change-Id: I4ab1531f69c73457653f1cca3fe30cc32a04c129
2016-07-11Merge "Set os-refresh-config timeout to 4 hours"Jenkins1-1/+1
2016-07-11Merge "Template param for what command occ runs"Jenkins1-0/+7
2016-07-05Combine BootstrapNodeDeployment with AllNodesDeploymentSteven Hardy1-0/+6
Currently we have a special controller-only deployment which writes the name/ip of the "bootstrap node", e.g the cluster master, which defaults to the first node in the Controller ResourceGroup. Now we're moving to fully composable services/roles, it's possible folks will want to deploy services that expect to detect the bootstrap node (e.g so only one node does a DB sync) for non-controller roles. So, take this opportunity to combine the bootstrap node deployment with the "all nodes" data, such that we deploy the same data for all roles. Because the boostrap node data is per role cluster, rather than truly global, we pass it via input_values into each per-role Deployment. At some future point we might consider renaming this, e.g to something which describes per-cluster config vs "all nodes", but as a first step let's just rationalize the resources. Change-Id: I4011526a13c51b3d0f95c17fe8ed38115b4fdce4
2016-07-05Set os-refresh-config timeout to 4 hoursSteve Baker1-1/+1
This change uses the new os-refresh-config --timeout argument to set a kill timeout for stalled os-refresh-config runs. 4 hours is a reasonable conservative value since it matches the stack timeout - but it can be set shorter in the future based on actual run times. Change-Id: I433f558515df24736263ec0d50de08ad8f78498f Closes-Bug: #1595722 DependsOn: Ibcbb2090aed126abec8dac49efa53ecbdb2b9b2c
2016-07-05Template param for what command occ runsSteve Baker1-0/+7
The ConfigCommand parameter overrides the server resource metadata to specify what command os-collect-config runs whenever any configuration data changes. The default is already 'os-refresh-config' so this change has no effect but it allows a future change to specify an os-refresh-config --timeout argument to fix bug #1595722. Change-Id: I8dd35b6724d8c00e5495faca84ee8fee77641b82 Partial-Bug: #1595722
2016-07-04Replace NodeConfigIdentifiers with DeployIdentifierSteven Hardy1-8/+0
We added NodeConfigIdentifiers to trigger config to be re-applied on update, but then later added DeployIdentifier which forces config to *always* be applied on update, so we can simplify things by just referencing the DeployIdentifier directly. Change-Id: I79212def1936740825b714419dcb4952bc586a39
2016-06-30Wire NTP and Timezone services into BlockStorage nodesGiulio Fidente1-12/+0
Change-Id: Ia70688cfc333dc6536b5372cdb2eedb987ab61f8
2016-06-29Configure BlockStorage services via resource chainsGiulio Fidente1-81/+7
Wires the steps into the BlockStorage role and ensures the installed-packages list is written on a per-step basis on all roles, as it happens on the controllers already. Change-Id: Iaec8ad3b2afbef6d586b7b46abaa1434cdb62f41
2016-05-30Pass MysqlVirtualIP via EndpointMapGiulio Fidente1-4/+9
By passing the MysqlVirtualIP via the EndpointMap we won't need it to be provided as a parameter to the services. This follows what is already happening for the glance registry service with I9186e56cd4746a60e65dc5ac12e6595ac56505f0. Change-Id: Iad2ab389bf64d0fc8b06eb0e7d29b5370ff27dff Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
2016-05-18Dump IPs configuration as hieradataGiulio Fidente1-0/+12
This might be useful if we switch to %{hiera()} calls to lookup the bind address from within a service. Also gets rid of NetIpSubnetMap and provides same output from NetIpMap instead. Change-Id: I328a417d1f1fff9c31e9ad7b2b5083ac19bc7329
2016-04-21Use 'deeper' hiera_hash merge behavior for all rolesGiulio Fidente1-0/+1
This change configures the hiera merge behavior to 'deeper' [1], which is useful to merge values when the same hiera key is found in multiple datafiles. The hiera default 'native' only picks the value from the key with the highest priority in the hierarchy. 1. https://docs.puppetlabs.com/hiera/1/lookup_types.html#deep-merging-in-hiera--120 Change-Id: I88c764d9af510ffbbad9fcaa4b747655e38255c2
2016-04-04Change /etc/hosts format and add domainJuan Antonio Osorio Robles1-12/+12
Right now, the service-related IPs assosiated with the machine are registered in the /etc/hosts with different hostnames. This is fine, except if you need to register that hostname in a third party service (such as FreeIPA), since the current configuration is not assigning a domain to those IP addresses. So the current implementation requires DNS to be properly working, which is not ideal for testing purposes. Since the current hostnames are not currently being used; it's still trivial to change this mapping and the format of them. instead of having entries such as: <INTERNAL IP> <node>-internalapi <STORAGE IP> <node>-storage ... in /etc/hosts; This changes the format to: <INTERNAL IP> <node>.internalapi.<domain> <node>.internalapi <STORAGE IP> <node>.storage.<domain> <node>.storage ... So the network (external, internal, storage, etc...) is now represented as a subdomain. For simplicity, the format without the domain is still available through an alias. Change-Id: I6502959a974546e5de757935acea15df6326acda
2016-03-24Add quotes around the cinder_iscsi_ip_address valueGiulio Fidente1-1/+5
In I783e939ae304385674909bfd9f1cac95e04cef22 we add brackets around the cinder_iscsi_ip_address if IPv6 but that causes hiera to try mapping the value into an array, while it isn't. This change adds quotes around the brackets. Change-Id: Id9bb4b12542f1943e9df702486d68424539c7a59 Closes-Bug: 1560934
2016-03-18Remove default for the RabbitMQ passwordJuan Antonio Osorio Robles1-1/+0
Since the password is now autogenerated from the tripleoclient, there is no need to keep the default value here. Change-Id: If41cb56134966456f8590da04f392faffe5c62a1 Closes-Bug: #1557688
2016-03-10Merge "Enable predictable IPs on non-controllers"Jenkins1-0/+18
2016-03-09Enable predictable IPs on non-controllersBen Nemec1-0/+18
For the external loadbalancer work, we added the ability to specify fixed ips for controller nodes on all network isolation networks. In order to allow users full control over the placement and ip addresses of deployed nodes, we need to be able to do the same thing for the other node types. Change-Id: I3ea91768b2ea3a40287f2f3cdb823c23533cf290
2016-03-08Change the CinderISCSIHelper to lioadmGiulio Fidente1-1/+1
Previously we used to always set CinderISCSIHelper to lioadm from the client. With [1] we aim at cleaning up the client from any default so this change move the actual default into the templates. 1. Iabc94ad1cce6f1744429aca9f866a59a698f5680 Change-Id: I662e4b0e3cf909ec2583d087ca1d246715caf0f7 Related-Bug: 1554564
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon1-2/+8
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-02Merge "Add HostnameMap to allow granular control of hostnames"Jenkins1-1/+8
2016-02-24Emits a different hostname for each network the node is onGiulio Fidente1-3/+46
Populates /etc/hosts with an entry for each IP address the node is on, which will be useful to migrate services configuration from using IPs into using hostnames. This is how the lines look like on a host which doesn't have all ports: 172.16.2.6 overcloud-novacompute-0.localdomain overcloud-novacompute-0 192.0.2.9 overcloud-novacompute-0-external 172.16.2.6 overcloud-novacompute-0-internalapi 172.16.1.6 overcloud-novacompute-0-storage 192.0.2.9 overcloud-novacompute-0-storagemgmt 172.16.0.4 overcloud-novacompute-0-tenant 192.0.2.9 overcloud-novacompute-0-management the network against which the default (or primary) name is resolved can be configured (for computes) via ComputeHostnameResolveNetwork Change-Id: Id480207c68e5d68967d67e2091cd081c17ab5dd7
2016-02-03Increase default Cinder LVM backing file to 10GGiulio Fidente1-1/+1
We get false negatives from Tempest when the Cinder LVM backing file runs out space. This change increases its default size to 10G, matching devstack [1] 1. https://github.com/openstack-dev/devstack/blob/master/stackrc#L649 Change-Id: Ia334ea481e17c1d35aa67c33729cac6570f48199
2016-02-03Add HostnameMap to allow granular control of hostnamesSteven Hardy1-1/+8
Some operators desire more granular control of hostnames than is currently possible via the *HostnameFormat parameters, in particular mapping nodes to explicit IDs (such as inventory references) is not easily possible. So, add a HostnameMap parameter, which is optional and allows explicit overriding of the default hostnames. E.g pass an environment like this: parameter_defaults: HostnameMap: overcloud-controller-0: overcloud-controller-prod-123-0 overcloud-controller-1: overcloud-controller-prod-456-0 overcloud-controller-2: overcloud-controller-prod-789-0 Note this is mapping is global (for all roles), because we expect the keys to be unique given that they include the role name and index by default. Note that this depends on a fix for heat bug #1539737 Change-Id: Ib4d3d40e9523903ebccc06c3e14b2d71d924afa3 Depends-On: Ib934f443a8b8e4f75335a9d8b992e7f86791aa45
2016-01-18Merge "Set the name property for all deployment resources"Jenkins1-0/+3
2016-01-11Use pymysql database driver for OpenStack DBsEmilien Macchi1-1/+1
PyMySQL is a new driver introduced in Liberty. This patch change the MySQL url to use mysql+pymysql like recommanded. Change-Id: I28e14acacba865241a0cc388a879a003181a85f3 Depends-On: I7604cca9e2d7bf0b93c820adec5f937f72b64fa8 Closes-Bug: #1499298
2016-01-05Add TimeZone parameter for all node typesNico Auv1-0/+6
Adds a TimeZone parameter for node types and the top level stack. Defaults to UTC. Change-Id: I98123d894ce429c34744233fe3e631cbdd7c12b5 Depends-On: Icf7c681f359e3e48b653ea4648db6a73b532d45e
2015-12-23Merge "Add all isolated networks to all nodes."Jenkins1-0/+20
2015-12-23Merge "Add Management Network For System Administration."Jenkins1-0/+10
2015-12-23Merge "Remove unsafe "unset" defaults"Jenkins1-2/+0
2015-12-21Merge "Add SoftwareConfigTransport for switching transports"Jenkins1-0/+8
2015-12-18Add all isolated networks to all nodes.Dan Sneddon1-0/+20
This change allows every overcloud node to optionally participate in any of the isolated networks. The optional networks are not enabled by default, but allow additional flexibility. Since the new networks are not enabled by default, the standared deployment is unchanged. This change was originally requested for OpenDaylight support. There are several use cases for using non-standard networks. For instance, one example might be adding the Internal API network to the Ceph nodes, in order to use that network for administrative functions. Another example would be adding the Storage Management network to the compute nodes, in order to use it for backup. Without this change, any deviation from the standard set of roles that use a network is a custom change to the Heat templates, which makes upgrades much more difficult. Change-Id: Ia386c964aa0ef79e457821d8d96ebb8ac2847231
2015-12-18Add Management Network For System Administration.Dan Sneddon1-0/+10
This change adds a system management network to all overcloud nodes. The purpose of this network is for system administration, for access to infrastructure services like DNS or NTP, or for monitoring. This allows the management network to be placed on a bond for redundancy, or for the system management network to be an out-of-band network with no routing in or out. The management network might also be configured as a default route instead of the provisioning 'ctlplane' network. This change does not enable the management network by default. An environment file named network-management.yaml may be included to enable the network and ports for each role. The included NIC config templates have been updated with a block that may be uncommented when the management network is enabled. This change also contains some minor cleanup to the NIC templates, particularly the multiple nic templates. Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
2015-12-14Merge "Fix wrong keypair parameter description"Jenkins1-1/+1
2015-12-12Add SoftwareConfigTransport for switching transportsSteve Baker1-0/+8
This change adds a SoftwareConfigTransport parameter to role templates so that the transport can be changed via a parameter_defaults entry. This change will have no effect on an existing overcloud as the current default POLL_SERVER_CFN is now explicit in the parameter default. Change-Id: I5c2a2d2170714093c5757282cba12ac65f8738a4
2015-12-10Fix wrong keypair parameter descriptionSteven Hardy1-1/+1
The parameters have nothing to do with EC2 keypairs, they are used to specify Nova SSH key pairs. Change-Id: Ia8d37cb5c443812d02133747cb54fcaf0110d091
2015-12-10Set the name property for all deployment resourcesSteve Baker1-0/+3
There are two reasons the name property should always be set for deployment resources: - The name often shows up in logs, files and API calls, the default derived name is long and unhelpful - Sorting by name determines the merge order of os-apply-config, and the execution order of puppet/shell scripts (note this is different to resource dependency order) so leaving the default name results in an undetermined order which could lead to unpredictable deployment of configs This change simply sets the name to the resource name, but a future change should prepend each name with a run-parts style 2 digit prefix so that the order is explicitly stated. Documentation for extraconfig needs to clearly state what prefix is needed to override which merge/execution order. For existing overcloud stacks, heat currently replaces deployment resources when the name changes, so this change Depends-On: I95037191915ccd32b2efb72203b146897a4edbc9 Change-Id: Ic4bcd56aa65b981275c3d4214588bfc4de63b3b0
2015-12-09Remove unsafe "unset" defaultsSteven Hardy1-2/+0
All of our sensitive parameters are defaulted to easily predictable values, which is very bad from a security perspective because we don't force clients to make sane choices thus risk deploying with the predictable default values. tripleoclient supports generating random values for all of these, so remove the defaults, for non-tripleoclient usage we can create a developer-only environment with defaults. Related-Bug: #1516027 Change-Id: Ia0cf3b7e2de1aa42cf179cba195fb7770a1fc21c Depends-On: Ifb34b43fdedc55ad220df358c3ccc31e3c2e7c14
2015-12-08Enable per-role SchedulerHintsSteven Hardy1-0/+5
This adds a parameter for each role, where optional scheduler hints may be passed to nova. One potential use-case for this is using the ComputeCapabilities to pin deployment to a specific node (not just a specific role/profile mapping to a pool of nodes like we have currently documented in the ahc-match docs). This could work as follows: 1. Tag a specific node as "node:controller-0" in Ironic: ironic node-update <id> replace properties/capabilities='node:controller-0,boot_option:local' 2. Create a heat environment file which uses %index% parameters: ControllerSchedulerHints: 'capabilities:node': 'controller-%index%' Change-Id: I79251dde719b4bb5c3b0cce90d0c9d1581ae66f2
2015-12-04Add option to add metadata for the overcloud nodesJuan Antonio Osorio Robles1-0/+7
Some Nova hooks might require custom properties/metadata set for the servers deployed in the overcloud, and this would enable us to inject such information. For FreeIPA (IdM) integration, there is effectively a Nova hook that requires such data. Currently this inserts metadata for all servers, but a subsequent CR will introduce per-role metadata. However, that was not added to this because it will require the usage of map_merge. which will block those changes to be backported. However, this one is not a problem in that sense. Change-Id: I98b15406525eda8dff704360d443590260430ff0
2015-12-02Introduce domain configuration through parameterJuan Antonio Osorio Robles1-1/+9
Introduce configuration of the nodes' domains through a parameter. Change-Id: Ie012f9f2a402b0333bebecb5b59565c26a654297
2015-11-25Enable trust anchor injectionJuan Antonio Osorio Robles1-1/+9
This commit enables the injection of a trust anchor or root certificate into every node in the overcloud. This is in case that the TLS certificates for the controllers are signed with a self-signed CA or if the deployer would like to inject a relevant root certificate for other purposes. In this case the other nodes might need to have the root certificate in their trust chain in order to do proper validation Change-Id: Ia45180fe0bb979cf12d19f039dbfd22e26fb4856