aboutsummaryrefslogtreecommitdiffstats
path: root/overcloud.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-02-23Introduce update/upgrade workflowJiri Stransky1-0/+13
Change-Id: I7226070aa87416e79f25625647f8e3076c9e2c9a
2016-02-19Merge "Add TripleO Heat Template Parameters for Neutron Tenant MTU"Jenkins1-3/+21
2016-02-18Merge "Enable the ML2 port security extension driver by default"Jenkins1-1/+1
2016-02-17Add TripleO Heat Template Parameters for Neutron Tenant MTUDan Sneddon1-3/+21
This change adds the TripleO Heat Parameters and Puppet hieradata to support setting the MTU for Neutron tenant networks. A new parameter, NeutronTenantMtu is introduced, and this gets used for the NeutronDnsmasqOptions and in Puppet hieradata. NeutronTenantMtu is also used in the Puppet hieradata for both the compute and control nodes. Two values are set: nova::compute::network_device_mtu which sets /etc/nova/nova.conf: network_device_mtu = <NeutronTenantMtu> neutron::network_device_mtu which sets in /etc/neutron/neutron.conf: network_device_mtu = <NeutronTenantMtu> finally, the NeutronDnsmasqOptions parameter becomes a str_format that maps the NeutronTenantMtu onto the DHCP options, so a default of 'dhcp-option-force=26,%MTU%' would be formatted to 'dhcp-option-force=26,1300' if NeutronTenantMtu were 1300. This will set dnsmasq to serve an MTU via DHCP that matches the NeutronTenantMtu: /etc/neutron/dnsmasq-neutron.conf:dhcp-option-force=26,1300 Typically, you would change all three of these settings to use small or jumbo frames in VMs. When using tunneling, NeutronTenantMtu should be set at least 50 bytes smaller than the physical network MTU in order to make room for tunneling overhead. Note that this change does not support setting the MTU on veth interfaces if veth patches are used to br-int instead of OVS patches. Change-Id: I38840e082ee01dc3b6fc78e1dd97f53fa4e63039
2016-02-11Merge "Increase default Cinder LVM backing file to 10G"Jenkins1-1/+1
2016-02-03Increase default Cinder LVM backing file to 10GGiulio Fidente1-1/+1
We get false negatives from Tempest when the Cinder LVM backing file runs out space. This change increases its default size to 10G, matching devstack [1] 1. https://github.com/openstack-dev/devstack/blob/master/stackrc#L649 Change-Id: Ia334ea481e17c1d35aa67c33729cac6570f48199
2016-01-28Allow the deployer to pick a predefined IP for VIPsGiulio Fidente1-0/+21
Adds three top-level params to allow the deployer pick a predefined IP for the InternalApi, Storage and StorageMgmt VIPs. We had this already for the External network (PublicVirtualFixedIPs) and the ctlplane network (ControlFixedIPs). Change-Id: I1509e1888774ffa72445ed681dd8107eec703d64
2016-01-26Merge "Removing Sahara password default"Jenkins1-2/+0
2016-01-22Merge "Update VNI and TunnelID ranges."Jenkins1-2/+2
2016-01-21Removing Sahara password defaultEthan Gafford1-2/+0
In prior commit, added default for Sahara password in order to avoid circular dependency. Removing this default now in order to force password per other service definitions. Change-Id: I91f98039e520804b25aaededefa25e80992ba6b5 Partially-implements: bp sahara-integration
2016-01-21Merge "Don't write CLOUDNAME to the hosts file."Jenkins1-1/+0
2016-01-20Don't write CLOUDNAME to the hosts file.Ben Nemec1-1/+0
Currently the value of the CloudName param gets written into the /etc/hosts file on each controller, but it turns out this is an invalid configuration. CloudName is supposed to be the DNS name of the overcloud, and the IP being written is (at least in my case) the internal API VIP. This breaks in cases such as SSL because the services are not listening on an SSL port on the internal API network, so if a service tries to talk to another service using a CloudName-defined public endpoint it ends up pointed at a non-existent internal address:port. Since by definition CloudName is supposed to be resolvable by the configured DNS server, we should not need an explicit hosts entry as well. Thus, this patch removes that from the file. Change-Id: I919b42a219d95296f46852dd3266a54d968cf66b
2016-01-18Merge "Set the name property for all deployment resources"Jenkins1-0/+18
2016-01-12Merge "Sahara Integration"Jenkins1-0/+15
2016-01-08Sahara IntegrationEthan Gafford1-0/+15
Integration of OpenStack data processing service (sahara) with TripleO. - Deploys sahara in distributed mode (separate api and engine processes on each controller node) - Load balancing w/haproxy - RabbitMQ/MySQL supported per current TripleO standard - Minimal configurability at this time Change-Id: I77a6a69ed5691e3b1ba34e9ebb4d88c80019642c Partially-implements: blueprint sahara-integration Depends-On: I0f0a1dc2eaa57d8226bad8cfb250110296ab9614 Depends-On: Ib84cc59667616ec94e7edce2715cbd7dd944f4ae Depends-On: I9fe321fd4284f7bfd55bd2e69dcfe623ed6f8a2a
2016-01-07Enable the ML2 port security extension driver by defaultBrent Eagles1-1/+1
This patch enables the port security ML2 extension driver by default. It should have no impact on users that do not explicitly modify the port security property on a port. Change-Id: I1413428a1c0329acf0276bf6032684e5e7f8e177 Closes-Bug: #1531970
2016-01-07Merge "Add TimeZone parameter for all node types"Jenkins1-0/+9
2016-01-06Enable configuration of Neutron QoSBrent Eagles1-1/+14
This change adds support for setting the configuration options required to enable the quality of service feature in Neutron. The default values will enable the feature. Closes-Bug: #1524052 Depends-On: Iefc289a6eee13b9c66f8131c258af982f232df4b Change-Id: I1abf7d37d39e6927e482b56de4ee3d3d7c313a1c
2016-01-06Merge "Align template defaults with the client"Jenkins1-8/+12
2016-01-05Add TimeZone parameter for all node typesNico Auv1-0/+9
Adds a TimeZone parameter for node types and the top level stack. Defaults to UTC. Change-Id: I98123d894ce429c34744233fe3e631cbdd7c12b5 Depends-On: Icf7c681f359e3e48b653ea4648db6a73b532d45e
2015-12-23Merge "Add Management Network For System Administration."Jenkins1-1/+2
2015-12-23Merge "Remove unsafe "unset" defaults"Jenkins1-14/+0
2015-12-18Add Management Network For System Administration.Dan Sneddon1-1/+2
This change adds a system management network to all overcloud nodes. The purpose of this network is for system administration, for access to infrastructure services like DNS or NTP, or for monitoring. This allows the management network to be placed on a bond for redundancy, or for the system management network to be an out-of-band network with no routing in or out. The management network might also be configured as a default route instead of the provisioning 'ctlplane' network. This change does not enable the management network by default. An environment file named network-management.yaml may be included to enable the network and ports for each role. The included NIC config templates have been updated with a block that may be uncommented when the management network is enabled. This change also contains some minor cleanup to the NIC templates, particularly the multiple nic templates. Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
2015-12-18Align template defaults with the clientGiulio Fidente1-8/+12
This aligns the parameter default values from python-tripleoclient with tripleo-heat-templates. This is in preparation for removing all the defaults from the client, and maintaining them only in the templates. Change-Id: I7b635a250f1ecc170e18d8e434f0118c6fcbb942 Co-Authored-By: James Slagle <jslagle@redhat.com>
2015-12-18Merge "Fix typo in HostsEntry output description"Jenkins1-1/+1
2015-12-18Merge "Allow for usage of pre-allocated IPs for the controller nodes"Jenkins1-5/+6
2015-12-16Update VNI and TunnelID ranges.Joe Talerico1-2/+2
Without modification we cannot scale to more than 1000 networks. Neutron will send this message to the user: "Unable to create the network. No tenant network is available for allocation." Change-Id: I5ecbc66a0b6aaa5edbe2669eed9caadfb0691511
2015-12-16Merge "Wire Neutron ML2 plugin and OVS agent settings as arrays"Jenkins1-10/+8
2015-12-15Merge "Pacemaker maintenance mode for the duration of Puppet run on update"Jenkins1-0/+2
2015-12-15Wire Neutron ML2 plugin and OVS agent settings as arraysGiulio Fidente1-10/+8
Wires the following as arrays to the neutron module: - mechanism_drivers - flat_networks - tenant_network_types - tunnel_types - bridge_mappings Also updates the template version to use a Liberty feature which allows serialization of comma_delimited_list into JSON. Tidies up the manifests by removing the class declarations since config is passed by the puppet/controller+compute hiera mapped_data. Change-Id: Ie9f85fb827099f897ef750e267bc3ed3a864fe59 Co-Authored-By: Steven Hardy <shardy@redhat.com>
2015-12-15Allow for usage of pre-allocated IPs for the controller nodesGiulio Fidente1-5/+6
This change adds a new *_from_pool.yaml meant to return an IP from a list instead of allocating a Neutron port, useful to pick an IP from a pre-defined list and making it possible to configure, for example an external balancer in advance (or dns), with the future IPs of the controller nodes. The list of IPs is provided via parameter_defaults (in the ControllerIPs struct) using ControllerIPs param. Also some additional VipPort types are created for the *VirtualIP resources. The VIPs were previously created using the same port resource used by the nodes, but when deploying with an external balancer we want the VIP resource to be nooped instead. Change-Id: Id3d4f12235501ae77200430a2dc022f378dce336
2015-12-14Merge "Fix wrong keypair parameter description"Jenkins1-1/+1
2015-12-15Fix typo in HostsEntry output descriptionJuan Antonio Osorio Robles1-1/+1
Change-Id: I72a79d8200adee8258033e8da370051bbfd1986b
2015-12-14Merge "Add output for host entries"Jenkins1-0/+6
2015-12-14Pacemaker maintenance mode for the duration of Puppet run on updateSteven Hardy1-0/+2
This enables pacemaker maintenantce mode when running Puppet on stack update. Puppet can try to restart some overcloud services, which pacemaker tries to prevent, and this can result in a failed Puppet run. At the end of the puppet run, certain pacemaker resources are restarted in an additional SoftwareDeployment to make sure that any config changes have been fully applied. This is only done on stack updates (when UpdateIdentifier is set to something), because the assumption is that on stack create services already come up with the correct config. (Change I9556085424fa3008d7f596578b58e7c33a336f75 has been squashed into this one.) Change-Id: I4d40358c511fc1f95b78a859e943082aaea17899 Co-Authored-By: Jiri Stransky <jistr@redhat.com> Co-Authored-By: James Slagle <jslagle@redhat.com>
2015-12-10Fix wrong keypair parameter descriptionSteven Hardy1-1/+1
The parameters have nothing to do with EC2 keypairs, they are used to specify Nova SSH key pairs. Change-Id: Ia8d37cb5c443812d02133747cb54fcaf0110d091
2015-12-10Set the name property for all deployment resourcesSteve Baker1-0/+18
There are two reasons the name property should always be set for deployment resources: - The name often shows up in logs, files and API calls, the default derived name is long and unhelpful - Sorting by name determines the merge order of os-apply-config, and the execution order of puppet/shell scripts (note this is different to resource dependency order) so leaving the default name results in an undetermined order which could lead to unpredictable deployment of configs This change simply sets the name to the resource name, but a future change should prepend each name with a run-parts style 2 digit prefix so that the order is explicitly stated. Documentation for extraconfig needs to clearly state what prefix is needed to override which merge/execution order. For existing overcloud stacks, heat currently replaces deployment resources when the name changes, so this change Depends-On: I95037191915ccd32b2efb72203b146897a4edbc9 Change-Id: Ic4bcd56aa65b981275c3d4214588bfc4de63b3b0
2015-12-09Remove unsafe "unset" defaultsSteven Hardy1-14/+0
All of our sensitive parameters are defaulted to easily predictable values, which is very bad from a security perspective because we don't force clients to make sane choices thus risk deploying with the predictable default values. tripleoclient supports generating random values for all of these, so remove the defaults, for non-tripleoclient usage we can create a developer-only environment with defaults. Related-Bug: #1516027 Change-Id: Ia0cf3b7e2de1aa42cf179cba195fb7770a1fc21c Depends-On: Ifb34b43fdedc55ad220df358c3ccc31e3c2e7c14
2015-12-08Enable per-role SchedulerHintsSteven Hardy1-1/+27
This adds a parameter for each role, where optional scheduler hints may be passed to nova. One potential use-case for this is using the ComputeCapabilities to pin deployment to a specific node (not just a specific role/profile mapping to a pool of nodes like we have currently documented in the ahc-match docs). This could work as follows: 1. Tag a specific node as "node:controller-0" in Ironic: ironic node-update <id> replace properties/capabilities='node:controller-0,boot_option:local' 2. Create a heat environment file which uses %index% parameters: ControllerSchedulerHints: 'capabilities:node': 'controller-%index%' Change-Id: I79251dde719b4bb5c3b0cce90d0c9d1581ae66f2
2015-12-07Merge "Making nova parameters configurable for nuage-metadata-agent"Jenkins1-0/+5
2015-12-04Making nova parameters configurable for nuage-metadata-agentRohit Pagedar1-0/+5
Exposing 'instance_name_template' to be set via extra config for nuage-metadata-agent to function Making nova::api::admin_tenant_name available on the compute node which is required by nuage-metadata-agent service Making KeystonePublicApiVirtualIP available on the compute node, which is used by the nuage-metadata-agent to build the auth-url Change-Id: I9736015e18cebf32b07940bf559063b60085f2fb
2015-12-04Add output for host entriesJuan Antonio Osorio Robles1-0/+6
For testing purposes it is useful to have an easy way to get the given IPs for the nodes; since currently one would have to ssh to one of the ndoes and actually fetch the entries from there. This will facilitate testing when the keystone endpoints have been changed for hostnames, as done in this CR: https://review.openstack.org/#/c/238887 Change-Id: I9b9362192d7e97690ba23d02e74389225913adb9
2015-12-04Add option to add metadata for the overcloud nodesJuan Antonio Osorio Robles1-0/+11
Some Nova hooks might require custom properties/metadata set for the servers deployed in the overcloud, and this would enable us to inject such information. For FreeIPA (IdM) integration, there is effectively a Nova hook that requires such data. Currently this inserts metadata for all servers, but a subsequent CR will introduce per-role metadata. However, that was not added to this because it will require the usage of map_merge. which will block those changes to be backported. However, this one is not a problem in that sense. Change-Id: I98b15406525eda8dff704360d443590260430ff0
2015-12-03Rename overcloud-without-mergepy to overcloud.Dan Prince1-0/+1498
Mergepy is gone. We can now rename our primary overcloud template to be more sensible. Change-Id: I14f5ff78b083b34590d30357df94c42ff6a0c2c0