summaryrefslogtreecommitdiffstats
path: root/overcloud.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-04-11Merge "composable keystone services"Jenkins1-47/+2
2016-04-09Merge "Add EndpointMap as output"Jenkins1-0/+6
2016-04-09composable keystone servicesDan Prince1-47/+2
Adds new puppet and puppet pacemaker specific services for Keystone. The puppet manifests for keystone now live in puppet-tripleo. Hiera settings are driven by the nested stack heat templates and used to control puppet-keystone and puppet-tripleo directly. The Pacemaker template extends the default keystone service and swaps in the pacemaker specific puppet-tripleo profile instead. Change-Id: I8b30438a27e9d5ec4e7d335e0bd1a931a20b03a2 Depends-On: I2faf5a78db802549053ec41678bf83bf28108189
2016-03-31Configure ControllerServices via resource chainsDan Prince1-1/+17
This patch wires in a new for Mitaka Heat feature that allows us to dynamically include a set of nested stacks representing individual services via a Heat resource chain. Follow on patches will use this interface to decompose the controller role into isolated services. Co-Authored-By: Steve Hardy <shardy@redhat.com> Depends-On: If510abe260ea7852dfe2d1f7f92b529979483068 Change-Id: I84c97a76159704c2d6c963bc4b26e365764b1366
2016-03-31Add EndpointMap as outputJuan Antonio Osorio Robles1-0/+6
The endpoint map contains, not only the hosts and protocols that the resulting services will use, but also the ports. This information is useful, and the aim of this patch is to make it available for the tripleoclient to use it. Change-Id: I4cc5bbf2e7200f78cd90b93659c326a9200278d7
2016-03-24Remove password default for AodhPasswordPradeep Kilambi1-1/+0
Change-Id: Ibf37bfd6150d212fadcc4d2e2e2d0a89cdd76c91
2016-03-24Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins1-0/+14
2016-03-23configure horizon with memcached ipv6 when neededEmilien Macchi1-0/+5
* Add MemcachedIPv6 parameter * If MemcachedIPv6 is set at True, configure Horizon with Memcached IPv6 addresses. This patch is required to make Horizon working when running IPv6 networks. Change-Id: I752e727bfb9040b29f5d755f565fa6b54b9511c8
2016-03-20Deploy Aodh services, replacing Ceilometer AlarmPradeep Kilambi1-0/+14
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config * Add migration logic to remove pcs resources Depends-On: I5333faa72e52d2aa2a622ac2d4b60825aadc52b5 Depends-On: Ib6c9c4c35da3fb55e0ca8e2d5a58ebaf4204d792 Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: Ib47a22884afb032ebc1655e1a4a06bfe70249134
2016-03-18Remove GlanceRegistry from EndpointMapGiulio Fidente1-1/+0
We don't need an endpoint for the glance-registry service, that is used by glance-api when needed and is not meant to be user-facing. Change-Id: Ia6c9dd6164d3b91adbc937d70fa74d5fbbfb28a3
2016-03-18Remove default for the RabbitMQ passwordJuan Antonio Osorio Robles1-2/+0
Since the password is now autogenerated from the tripleoclient, there is no need to keep the default value here. Change-Id: If41cb56134966456f8590da04f392faffe5c62a1 Closes-Bug: #1557688
2016-03-15Merge "Ensure access to Redis is password protected"Jenkins1-0/+5
2016-03-14Merge "Keystone domain for Heat"Jenkins1-1/+1
2016-03-10Merge "Enable predictable IPs on non-controllers"Jenkins1-0/+4
2016-03-10Allow the vnc server to bind on IPv6 address on computesMarius Cornea1-0/+1
Currently the vnc server on the compute nodes binds on 0.0.0.0. which only works with IPv4 addresses, it breaks connectivity with IPv6 addressing. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1300678. Change-Id: Id642d224fb3c62f786453dc684634adca1c2c09d Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
2016-03-10Keystone domain for HeatMartin Mágr1-1/+1
This patch adds support for configuring Keystone domain for Heat via heat-keystone-setup-domain script. It should be reverted as soon as Keystone v3 is fully functional. This patch won't be fully functional without either python-keystoneclient fix [1] or workaround [2]. [1] https://bugs.launchpad.net/python-keystoneclient/+bug/1452298 [2] https://review.openstack.org/180563 Change-Id: Ie9cdd518b299c141f0fdbb3441a7761c27321a88 Co-Authored-By: Jiri Stransky <jistr@redhat.com> Depends-On: Ic541f11978908f9344e5590f3961f0d31c04bb0c
2016-03-09Enable predictable IPs on non-controllersBen Nemec1-0/+4
For the external loadbalancer work, we added the ability to specify fixed ips for controller nodes on all network isolation networks. In order to allow users full control over the placement and ip addresses of deployed nodes, we need to be able to do the same thing for the other node types. Change-Id: I3ea91768b2ea3a40287f2f3cdb823c23533cf290
2016-03-09Ensure access to Redis is password protectedGiulio Fidente1-0/+5
Depends-On: I1a8741b9e00775763911222cbe0af677b59e03a1 Change-Id: I373f97ada4e4101700a12b42dfb8ee4b2ff701f2
2016-03-09Merge "Add Rabbit IPv6 only support"Jenkins1-0/+5
2016-03-09Add Rabbit IPv6 only supportMartin Mágr1-0/+5
Adds Rabbit environment variable required for IPv6 only support Change-Id: Iec209ca83a5b0708ac828c4afaf9d2222e597f24
2016-03-08Change the CinderISCSIHelper to lioadmGiulio Fidente1-1/+1
Previously we used to always set CinderISCSIHelper to lioadm from the client. With [1] we aim at cleaning up the client from any default so this change move the actual default into the templates. 1. Iabc94ad1cce6f1744429aca9f866a59a698f5680 Change-Id: I662e4b0e3cf909ec2583d087ca1d246715caf0f7 Related-Bug: 1554564
2016-03-07Merge "Make AllNodesExtraConfig depend on the validation deployments"Jenkins1-1/+7
2016-03-07Merge "Allow to enable IPv6 on Corosync"Jenkins1-0/+5
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle1-14/+0
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-05Allow to enable IPv6 on CorosyncEmilien Macchi1-0/+5
To enable IPv6 in Corosync, you'll need to set the --ipv6 parameter when building the cluster. To do so, we need to specify this parameter in puppet configuration when running ::pacemaker::corosync class. So we have now a new parameter: CorosyncIPv6 which is a boolean, False by default. If set to True, it will pass right options to enable IPv6 when building the Pacemaker cluster. Change-Id: I485f1399964ddd7a201ed19ec6580b8a136b3acd
2016-03-04Make AllNodesExtraConfig depend on the validation deploymentsJames Slagle1-1/+7
AllNodesExtraConfig should really only run after the validation deployments are done, which validate that basic networking is functioning. In particular, creating a swap file during AllNodesExtraConfig while the validation deployments are still running might cause temporary network outages which could fail the validations. Change-Id: Ia2a10318de47854a9b8932d72243ce0a85603556 Partial-Bug: #1553243
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon1-15/+32
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-03Deploy Aodh services, replacing Ceilometer AlarmEmilien Macchi1-0/+14
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config Depends-On: I9e34485285829884d9c954b804e3bdd5d6e31635 Depends-On: I891985da9248a88c6ce2df1dd186881f582605ee Depends-On: Ied8ba5985f43a5c5b3be5b35a091aef6ed86572f Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: I58d419173e80d2462accf7324c987c71420fd5f6
2016-02-23Introduce update/upgrade workflowJiri Stransky1-0/+13
Change-Id: I7226070aa87416e79f25625647f8e3076c9e2c9a
2016-02-19Merge "Add TripleO Heat Template Parameters for Neutron Tenant MTU"Jenkins1-3/+21
2016-02-18Merge "Enable the ML2 port security extension driver by default"Jenkins1-1/+1
2016-02-17Add TripleO Heat Template Parameters for Neutron Tenant MTUDan Sneddon1-3/+21
This change adds the TripleO Heat Parameters and Puppet hieradata to support setting the MTU for Neutron tenant networks. A new parameter, NeutronTenantMtu is introduced, and this gets used for the NeutronDnsmasqOptions and in Puppet hieradata. NeutronTenantMtu is also used in the Puppet hieradata for both the compute and control nodes. Two values are set: nova::compute::network_device_mtu which sets /etc/nova/nova.conf: network_device_mtu = <NeutronTenantMtu> neutron::network_device_mtu which sets in /etc/neutron/neutron.conf: network_device_mtu = <NeutronTenantMtu> finally, the NeutronDnsmasqOptions parameter becomes a str_format that maps the NeutronTenantMtu onto the DHCP options, so a default of 'dhcp-option-force=26,%MTU%' would be formatted to 'dhcp-option-force=26,1300' if NeutronTenantMtu were 1300. This will set dnsmasq to serve an MTU via DHCP that matches the NeutronTenantMtu: /etc/neutron/dnsmasq-neutron.conf:dhcp-option-force=26,1300 Typically, you would change all three of these settings to use small or jumbo frames in VMs. When using tunneling, NeutronTenantMtu should be set at least 50 bytes smaller than the physical network MTU in order to make room for tunneling overhead. Note that this change does not support setting the MTU on veth interfaces if veth patches are used to br-int instead of OVS patches. Change-Id: I38840e082ee01dc3b6fc78e1dd97f53fa4e63039
2016-02-11Merge "Increase default Cinder LVM backing file to 10G"Jenkins1-1/+1
2016-02-03Increase default Cinder LVM backing file to 10GGiulio Fidente1-1/+1
We get false negatives from Tempest when the Cinder LVM backing file runs out space. This change increases its default size to 10G, matching devstack [1] 1. https://github.com/openstack-dev/devstack/blob/master/stackrc#L649 Change-Id: Ia334ea481e17c1d35aa67c33729cac6570f48199
2016-01-28Allow the deployer to pick a predefined IP for VIPsGiulio Fidente1-0/+21
Adds three top-level params to allow the deployer pick a predefined IP for the InternalApi, Storage and StorageMgmt VIPs. We had this already for the External network (PublicVirtualFixedIPs) and the ctlplane network (ControlFixedIPs). Change-Id: I1509e1888774ffa72445ed681dd8107eec703d64
2016-01-26Merge "Removing Sahara password default"Jenkins1-2/+0
2016-01-22Merge "Update VNI and TunnelID ranges."Jenkins1-2/+2
2016-01-21Removing Sahara password defaultEthan Gafford1-2/+0
In prior commit, added default for Sahara password in order to avoid circular dependency. Removing this default now in order to force password per other service definitions. Change-Id: I91f98039e520804b25aaededefa25e80992ba6b5 Partially-implements: bp sahara-integration
2016-01-21Merge "Don't write CLOUDNAME to the hosts file."Jenkins1-1/+0
2016-01-20Don't write CLOUDNAME to the hosts file.Ben Nemec1-1/+0
Currently the value of the CloudName param gets written into the /etc/hosts file on each controller, but it turns out this is an invalid configuration. CloudName is supposed to be the DNS name of the overcloud, and the IP being written is (at least in my case) the internal API VIP. This breaks in cases such as SSL because the services are not listening on an SSL port on the internal API network, so if a service tries to talk to another service using a CloudName-defined public endpoint it ends up pointed at a non-existent internal address:port. Since by definition CloudName is supposed to be resolvable by the configured DNS server, we should not need an explicit hosts entry as well. Thus, this patch removes that from the file. Change-Id: I919b42a219d95296f46852dd3266a54d968cf66b
2016-01-18Merge "Set the name property for all deployment resources"Jenkins1-0/+18
2016-01-12Merge "Sahara Integration"Jenkins1-0/+15
2016-01-08Sahara IntegrationEthan Gafford1-0/+15
Integration of OpenStack data processing service (sahara) with TripleO. - Deploys sahara in distributed mode (separate api and engine processes on each controller node) - Load balancing w/haproxy - RabbitMQ/MySQL supported per current TripleO standard - Minimal configurability at this time Change-Id: I77a6a69ed5691e3b1ba34e9ebb4d88c80019642c Partially-implements: blueprint sahara-integration Depends-On: I0f0a1dc2eaa57d8226bad8cfb250110296ab9614 Depends-On: Ib84cc59667616ec94e7edce2715cbd7dd944f4ae Depends-On: I9fe321fd4284f7bfd55bd2e69dcfe623ed6f8a2a
2016-01-07Enable the ML2 port security extension driver by defaultBrent Eagles1-1/+1
This patch enables the port security ML2 extension driver by default. It should have no impact on users that do not explicitly modify the port security property on a port. Change-Id: I1413428a1c0329acf0276bf6032684e5e7f8e177 Closes-Bug: #1531970
2016-01-07Merge "Add TimeZone parameter for all node types"Jenkins1-0/+9
2016-01-06Enable configuration of Neutron QoSBrent Eagles1-1/+14
This change adds support for setting the configuration options required to enable the quality of service feature in Neutron. The default values will enable the feature. Closes-Bug: #1524052 Depends-On: Iefc289a6eee13b9c66f8131c258af982f232df4b Change-Id: I1abf7d37d39e6927e482b56de4ee3d3d7c313a1c
2016-01-06Merge "Align template defaults with the client"Jenkins1-8/+12
2016-01-05Add TimeZone parameter for all node typesNico Auv1-0/+9
Adds a TimeZone parameter for node types and the top level stack. Defaults to UTC. Change-Id: I98123d894ce429c34744233fe3e631cbdd7c12b5 Depends-On: Icf7c681f359e3e48b653ea4648db6a73b532d45e
2015-12-23Merge "Add Management Network For System Administration."Jenkins1-1/+2
2015-12-23Merge "Remove unsafe "unset" defaults"Jenkins1-14/+0