aboutsummaryrefslogtreecommitdiffstats
path: root/overcloud-source.yaml
AgeCommit message (Collapse)AuthorFilesLines
2014-07-31controller0AllNodesConfig to controller0AllNodes.Nicholas Randon1-1/+1
Rename all occurrences of controller0AllNodesConfig to controller0AllNodes as this is in line with compute node deployments. Also the current naming is confusing as this is a deployment step not a configuration step. Change-Id: I8efa3b6a64a099e1e8ee43009472152aed5f8ad8
2014-07-25Merge "Fix SSL with HAProxy."Jenkins1-0/+8
2014-07-22Define and bind a public virtual IPJames Polley1-1/+70
Prior to this change our heat templates define one virtual IP, which all the services are bound to. We wish to be able to segregate these endpoints: some need to be accessible to "the public"; some are only intended to be accessed within the cloud; some are only for admin use. This change adds a second VIP which we can use for binding only the endpoints that are intended to be publicly accessible, leaving the older VIP to be used for internal end points. Haproxy is told to also listen on that new VIP so that we can expose selected services via the new VIP, and keepalived is in charge of assigning the VIP to control plane nodes. This change has a proposed split of services between control-only and control+public interfaces. Assuming our yaml parsers (in merge.py and Heat) understand YAML anchors/aliases, and assuming I've got the syntax right, this should get expanded so that all the control+public services get their config defined from the same block without needing to repeat it for each service. (AFAICT both merge.py and heat use pyyaml, which does support aliases/anchors) The default is left at binding to only the controlplane interface, so that new services added to this map will default to being internal-only This patchset partially completes a spec which will one day live at https://blueprints.launchpad.net/tripleo/+specs/tripleo-juno-virtual-public-ips but for now can bee seen in Id9addc65f0d2ed519ce4b3edbd561ed660a2786e Implements: blueprint tripleo-juno-virtual-public-ips Change-Id: I9649ee74ebaf62b6b929b28243a07c789a08867c Co-Authored-By: Robert Collins <rbtcollins@hp.com> Partial-Bug #1325114
2014-07-19Fix SSL with HAProxy.Robert Collins1-0/+8
The current configuration of services is that if SSL is in use (signaled by stunnel.connect_ip) we bind to 127.0.0.1 - which is great, but it breaks simultaneous non-SSL due to there being no pass-through stunnel equivalent on all the nodes. As an interim measure, teach stunnel to connect to the ctlplane address instead. We will need this flexability in future anyway to deal with mixed-mode configurations, but we don't yet have an SSL only configuration. The change will permit SSL only by altering the Deployment object only - the SSL config object should now be flexible enough to run in either mode (but as yet on an all-one-way-or-the-other basis). Change-Id: Ibac3dec1fe7b573029482fdd9ad2d2f6223fbce0
2014-07-18Merge "make keystone.host point to controller_virtual_ip"Jenkins1-1/+1
2014-07-18Merge "Add corosync and pacemaker properties into overcloud template"Jenkins1-0/+11
2014-07-17Merge "make glance.host point to controller_virtual_ip"Jenkins1-1/+1
2014-07-17Merge "use ControlVirtualInterface for keepalived VRRP"Jenkins1-1/+1
2014-07-17Merge "add Horizon caches backend definition (memcached)"Jenkins1-0/+7
2014-07-11Merge "Use the right DSN for neutron agents."Jenkins1-1/+1
2014-07-10add Horizon caches backend definition (memcached)Giulio Fidente1-0/+7
This change adds into the overcloud-source template a structure name horizon.caches meant to define the Horizon caches backend. It defaults to using memcached and provides a list of the memcached nodes in horizon.caches.memcached.nodes Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: I728e05926f2de0e867fb8e8c74c63947da7d987a
2014-07-10make glance.host point to controller_virtual_ipGiulio Fidente1-1/+1
Previously glance.host was pointing to the local controller_host which would have requests to glance from other services to fail if the local glance daemon was unavailable. Change-Id: Ifd4f4b12cd51e23313826288797cc00ba3cd1754
2014-07-10make keystone.host point to controller_virtual_ipGiulio Fidente1-1/+1
Previously keystone.host was pointing to the local controller_host which would have caused all local services to become unavailable if keystone was to go down. Closes-Bug: #1339986 Change-Id: I9b73595d3e0ae6e872aa6b7e0f93354ff04f2956
2014-07-10use ControlVirtualInterface for keepalived VRRPGiulio Fidente1-1/+1
Change keepalived.keepalive_interface so that it uses the actual ControlVirtualInterface (bridge) for VRRP rather than the bridged interface (NeutronPublicInterface). Fixes the issue which caused keepalived to bring up the VIP on all control nodes. Change-Id: Ifc484d6a6086d9872210aa576f21d326f60b7d35
2014-07-08Add corosync and pacemaker properties into overcloud templateJan Provaznik1-0/+11
Pacemaker will be used for managing ceilometer central agent, we need basic metadata to setup corosync and pacemaker. Related to: Ifa83d62c2132bcdcb40d0b7c80ce3adadc0b5587 Change-Id: I44909005d9bc653c3e7c2de1c12fe4ffecf6bede
2014-07-07Specify the network for nodesRobert Collins1-0/+2
Without this, when there are multiple admin networks (e.g. a VLAN) Nova will refuse to guess and we'll fail to deploy. Change-Id: Id1dca43ef287fda2adcfdf5b5d30145b055dbe76
2014-07-03Make stack complete depend on all nodesClint Byrum1-2/+2
Previously the completion signal was just based on the first run of os-refresh-config. But in this case, we actually need to wait until it runs successfully with all hosts computed. That way we can know that services aren't in an unstable state while that configuration rolls out. Change-Id: I3b965c19c92b366df3069cb8e1daffa18252c884 Closes-Bug: #1337230
2014-07-02Merge "Enable multi-node rabbitmq cluster"Jenkins1-9/+13
2014-07-02Merge "Compute all hosts matrix once"Jenkins1-59/+18
2014-07-01Enable multi-node rabbitmq clusterJan Provaznik1-9/+13
This causes that: * rabbit.nodes is list of all control nodes * rabbit_hosts in OS config files points to all nodes in rabbitmq cluster * overcloud control nodes are joined into cluster This works both for single or multiple control nodes and it's needed for scaling out control nodes. rabbit.nodes property is very similar to generating list of all hosts, so it uses same StructuredConfig block. This block (and couple of references) is renamed to allNodesConfig to make it more general. Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: Ice1a34ba7a52c41c1bb0c63350438971c651e7b6
2014-06-30Merge "Add galera clustering properties"Jenkins1-0/+13
2014-06-30Compute all hosts matrix onceClint Byrum1-59/+18
Then feed in through separate deployments. This reduces the exponential growth of calculating the entire list for every server. Change-Id: Ib1187eabeb91b46e29ddcf5065056e43a69bb2a0
2014-06-30Merge "Haproxy configuration"Jenkins1-0/+39
2014-06-30Add galera clustering propertiesGregory Haynes1-0/+13
Adding nodes and cluster_name properties for mysql in order to enable galera clustering. Change-Id: I522b7324460469c59f49983ca3becd9ea914cdc0
2014-06-29Haproxy configurationDima Shulyak1-0/+39
Added several sections that are required for HAproxy configuration 1. haproxy.services - standard openstack services ports 2. haproxy.nodes - openstack controllers 3. haproxy.net_binds - virtual ips, that will also act as public endpoint input controller_nodes scales with OVERCLOUD_CONTROLSCALE > 1 Related change t-i-e I641fa90c4a34c26e5699cf7f5a6f9643792c7b16 Implements blueprint tripleo-haproxy-configuration Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: I9c70812ee1b3e8c8c072705fc5123da88ecc8f9f
2014-06-30Use the right DSN for neutron agents.Robert Collins1-1/+1
Since the wrong one is a bad idea :) Change-Id: I7ed40078f487459dee9055ef41f10a9b60a0e674
2014-06-27Merge "Set glance protocol and port as Heat configurable"Jenkins1-0/+12
2014-06-25Add parameters for setting up keystone keys/certs in undercloudJan Provaznik1-8/+0
This will allow us distribute identical keys/certs to all control nodes in HA mode. CAKey was removed because it's not required by keystone. Change-Id: I187492d5fac448e57f8cd687f9cb751520df5921
2014-06-16Set glance protocol and port as Heat configurableRyan Moore1-0/+12
This change is to set the glance protocol and port as configurable via the Heat template. Presently the port is hard-coded in the elements nova.conf file, and the protocol is assumed as being the default (http). This change will allow the glance_api_servers to be set (in nova.conf) using the constituent parts: glance_protocol://glance_host:glance_port Change to nova.conf to read this value is: Idccc0d60c9f6b17a853c6de1bbea64bfc7e028b2 Default port value is set to the nova default(9292) which is currently hard-coded in the elements nova.conf file. Default protocol value is set to the nova default(http). Change-Id: I3c7218292797c62c36e2aaab4f325bf053ef140b
2014-06-16Merge "Use virtual ip for OS services"Jenkins1-4/+6
2014-06-11Merge "Add parameters for setting up keystone keys/certs"Jenkins1-0/+24
2014-06-09Use virtual ip for OS servicesJan Provaznik1-4/+6
VIP should be used when pointing an OS service to another OS service in config files (most typical is setting Keystone's host IP, but also Glance and Netron host needs to be set in Nova config file). Change-Id: Id91e6ef2747981f17a43afd279d4eebaad01fe4d
2014-06-02Move bootstrap-host out from bootstackGregory Haynes1-2/+3
We have had a change of opinion and are moving bootstrap_host properties out of bootstack in order to prevent mysql / rabbit from depending on boot-stack. Change-Id: I85399019c5fc448e98362ef832988abc8d9d459d
2014-05-30Merge "ssl: Add support for a CA Certificate"Jenkins1-0/+1
2014-05-28Export new bootstack keys for cluster init.Robert Collins1-0/+19
These provide a single consistent interface for checking whether a given node is the bootstrap node, or not the bootstrap node for database initialisation etc. Change-Id: I7c5a09cb3477b61c4050e4a47a680ffc9aee97d8
2014-05-21Add parameters for setting up keystone keys/certsJan Provaznik1-0/+24
This will allow us distribute identical keys/certs to all control nodes in HA mode. Change-Id: Ie84f3897717c02e196a405746865996c0a929977
2014-05-20Use vip address where controller0 was used for endpointsDima Shulyak1-15/+15
This change is required to resolve scaling issue for OVERCLOUD_CONTROLSCALE > 1 Basicly change affected all the places where endpoints were configured to use controller0 ctlplane ip address Change-Id: I76eb9d2b81d3ef5e9fae408f2432515f4de13e12
2014-05-20ssl: Add support for a CA CertificateStuart McLaren1-0/+1
Add SSLCACertificate to the overcloud yaml. This allows a CA certificate to be specified in cases where the Cert does not come from a CA in the system bundle. Partially implements: blueprint tripleo-ssl-overcloud Full set of blueprint changes: https://review.openstack.org/#/c/85098 https://review.openstack.org/#/c/85099 https://review.openstack.org/#/c/85100 Change-Id: I67d7c1362df323762023be5c74fbe75b1583570c
2014-05-20Merge "Specify group os-apply-config for config resources"Jenkins1-0/+2
2014-05-16Merge "Adding SNMPd auth credentials"Jenkins1-1/+16
2014-05-09Introduce configurable virtual ip in templatesDima Shulyak1-0/+24
added ControlVirtualIP resource of type OS::Neutron::Port Added ControlVirtualInterface - by default br-ex To specify the IP address to use as ControlVirtualIP, or for any others custom needs, you could provide: -P 'ControlFixedIPs=[{"ip_address" : "192.0.2.251"}]' Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: Ie82750ac1537c80311a869880f636bda59ca5c58
2014-05-08Defer to element mysql.innodb_buffer_pool_sizeClint Byrum1-2/+5
Choosing 100MB here is not a production default. We also don't need two places with the default value set. The closer a default is to the actual usage of it, the better, so we'll set 0 here, which will defer to the default in the element. Change-Id: I1b41b604286245c2fb83249778db835253c02fc5
2014-05-08Merge "Add NeutronControlPlaneID parameter"Jenkins1-0/+4
2014-05-07Merge "Make size of loop device used by cinder LVM configurable"Jenkins1-1/+6
2014-05-06Add NeutronControlPlaneID parameterDmitry Shulyak1-0/+4
Creation of OS::Neutron::Port requires network_id parameter OS::Neutron::Port will be used for VIP creation Creating port for network by name, e.g: neutron port-create ctlplane works only with neutron cli Change-Id: Ia8bd6f700a4897efd277fd67189d2e04ad716b87
2014-05-02Specify group os-apply-config for config resourcesSteve Baker1-0/+2
This will indicate to os-collect-config that this config resource represents os-apply-config configuration data, so it can only write out top-level config files for os-apply-config data (or Heat::Ungrouped for backwards compatibility). Change-Id: I3552fdd6df8106ab83cfd17d5f4b137cf33fbc36 Related-Bug: #1299109
2014-05-01Scale the control plane in hosts files.Robert Collins1-14/+80
Being able to figure out the hypervisors from the control nodes seems useful, and equally all the hypervisors should know about all the control nodes (at least until we have virtual IPs all in place), and lastly the control plane need to know each other by hostname. Change-Id: I92877501c58d8c210e7b2c94935e107355271fb9
2014-04-28Adding SNMPd auth credentialsLadislav Smola1-1/+16
-Undercloud Ceilometer has to have access to SNMPd credentials, so it can poll the Overcloud nodes -In every Overcloud node, we need to set the same cretentials to SNMPd.conf Change-Id: Icf7c0c1772b6380b7136108e61c15cafe17274ba
2014-04-25Make size of loop device used by cinder LVM configurableDuncan Thomas1-1/+6
This was hard-coded to 5 gig, which is useless for anything other than tempest runs and smoke testing block-storage-nfs.yaml has intentionally not been changed, since volume_size_mb is not used in that setup. Cleaning up that code will be done separately. Change-Id: I476b906a8d439d3e6643dd0c214965c5862418e8
2014-04-23Expose dnsmasq optionsJames Slagle1-0/+6
Adds a new parameter, NeutronDnsmasqOptions, to the overcloud template. Allows the ability to set dnsmasq options for neutron dhcp agent. This will allow us to configure mtu to be 1400 for tenant instances on the overcloud. This should help with poor network performance and vm's that are just plain unreachable via ssh due to the GRE tunnel overhead. The default here has been set to: dhcp-option-force=26,1400 This is the recommended way to configure OpenStack with the Open vSwitch plugin per: http://docs.openstack.org/admin-guide-cloud/content/openvswitch_plugin.html All the documentation I can find on the web (openstack-dev, ask.openstack.org, etc), recommend applying this setting. Others have reported slow vm performance as well, and this resolves that issue (apparently anyway...we'd need to test). Change-Id: If24326045987b5a484ba2f71f591092987966536 Partial-Bug: #1270646