aboutsummaryrefslogtreecommitdiffstats
path: root/overcloud-source.yaml
AgeCommit message (Collapse)AuthorFilesLines
2014-07-10add Horizon caches backend definition (memcached)Giulio Fidente1-0/+7
This change adds into the overcloud-source template a structure name horizon.caches meant to define the Horizon caches backend. It defaults to using memcached and provides a list of the memcached nodes in horizon.caches.memcached.nodes Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: I728e05926f2de0e867fb8e8c74c63947da7d987a
2014-07-07Specify the network for nodesRobert Collins1-0/+2
Without this, when there are multiple admin networks (e.g. a VLAN) Nova will refuse to guess and we'll fail to deploy. Change-Id: Id1dca43ef287fda2adcfdf5b5d30145b055dbe76
2014-07-03Make stack complete depend on all nodesClint Byrum1-2/+2
Previously the completion signal was just based on the first run of os-refresh-config. But in this case, we actually need to wait until it runs successfully with all hosts computed. That way we can know that services aren't in an unstable state while that configuration rolls out. Change-Id: I3b965c19c92b366df3069cb8e1daffa18252c884 Closes-Bug: #1337230
2014-07-02Merge "Enable multi-node rabbitmq cluster"Jenkins1-9/+13
2014-07-02Merge "Compute all hosts matrix once"Jenkins1-59/+18
2014-07-01Enable multi-node rabbitmq clusterJan Provaznik1-9/+13
This causes that: * rabbit.nodes is list of all control nodes * rabbit_hosts in OS config files points to all nodes in rabbitmq cluster * overcloud control nodes are joined into cluster This works both for single or multiple control nodes and it's needed for scaling out control nodes. rabbit.nodes property is very similar to generating list of all hosts, so it uses same StructuredConfig block. This block (and couple of references) is renamed to allNodesConfig to make it more general. Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: Ice1a34ba7a52c41c1bb0c63350438971c651e7b6
2014-06-30Merge "Add galera clustering properties"Jenkins1-0/+13
2014-06-30Compute all hosts matrix onceClint Byrum1-59/+18
Then feed in through separate deployments. This reduces the exponential growth of calculating the entire list for every server. Change-Id: Ib1187eabeb91b46e29ddcf5065056e43a69bb2a0
2014-06-30Merge "Haproxy configuration"Jenkins1-0/+39
2014-06-30Add galera clustering propertiesGregory Haynes1-0/+13
Adding nodes and cluster_name properties for mysql in order to enable galera clustering. Change-Id: I522b7324460469c59f49983ca3becd9ea914cdc0
2014-06-29Haproxy configurationDima Shulyak1-0/+39
Added several sections that are required for HAproxy configuration 1. haproxy.services - standard openstack services ports 2. haproxy.nodes - openstack controllers 3. haproxy.net_binds - virtual ips, that will also act as public endpoint input controller_nodes scales with OVERCLOUD_CONTROLSCALE > 1 Related change t-i-e I641fa90c4a34c26e5699cf7f5a6f9643792c7b16 Implements blueprint tripleo-haproxy-configuration Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: I9c70812ee1b3e8c8c072705fc5123da88ecc8f9f
2014-06-27Merge "Set glance protocol and port as Heat configurable"Jenkins1-0/+12
2014-06-25Add parameters for setting up keystone keys/certs in undercloudJan Provaznik1-8/+0
This will allow us distribute identical keys/certs to all control nodes in HA mode. CAKey was removed because it's not required by keystone. Change-Id: I187492d5fac448e57f8cd687f9cb751520df5921
2014-06-16Set glance protocol and port as Heat configurableRyan Moore1-0/+12
This change is to set the glance protocol and port as configurable via the Heat template. Presently the port is hard-coded in the elements nova.conf file, and the protocol is assumed as being the default (http). This change will allow the glance_api_servers to be set (in nova.conf) using the constituent parts: glance_protocol://glance_host:glance_port Change to nova.conf to read this value is: Idccc0d60c9f6b17a853c6de1bbea64bfc7e028b2 Default port value is set to the nova default(9292) which is currently hard-coded in the elements nova.conf file. Default protocol value is set to the nova default(http). Change-Id: I3c7218292797c62c36e2aaab4f325bf053ef140b
2014-06-16Merge "Use virtual ip for OS services"Jenkins1-4/+6
2014-06-11Merge "Add parameters for setting up keystone keys/certs"Jenkins1-0/+24
2014-06-09Use virtual ip for OS servicesJan Provaznik1-4/+6
VIP should be used when pointing an OS service to another OS service in config files (most typical is setting Keystone's host IP, but also Glance and Netron host needs to be set in Nova config file). Change-Id: Id91e6ef2747981f17a43afd279d4eebaad01fe4d
2014-06-02Move bootstrap-host out from bootstackGregory Haynes1-2/+3
We have had a change of opinion and are moving bootstrap_host properties out of bootstack in order to prevent mysql / rabbit from depending on boot-stack. Change-Id: I85399019c5fc448e98362ef832988abc8d9d459d
2014-05-30Merge "ssl: Add support for a CA Certificate"Jenkins1-0/+1
2014-05-28Export new bootstack keys for cluster init.Robert Collins1-0/+19
These provide a single consistent interface for checking whether a given node is the bootstrap node, or not the bootstrap node for database initialisation etc. Change-Id: I7c5a09cb3477b61c4050e4a47a680ffc9aee97d8
2014-05-21Add parameters for setting up keystone keys/certsJan Provaznik1-0/+24
This will allow us distribute identical keys/certs to all control nodes in HA mode. Change-Id: Ie84f3897717c02e196a405746865996c0a929977
2014-05-20Use vip address where controller0 was used for endpointsDima Shulyak1-15/+15
This change is required to resolve scaling issue for OVERCLOUD_CONTROLSCALE > 1 Basicly change affected all the places where endpoints were configured to use controller0 ctlplane ip address Change-Id: I76eb9d2b81d3ef5e9fae408f2432515f4de13e12
2014-05-20ssl: Add support for a CA CertificateStuart McLaren1-0/+1
Add SSLCACertificate to the overcloud yaml. This allows a CA certificate to be specified in cases where the Cert does not come from a CA in the system bundle. Partially implements: blueprint tripleo-ssl-overcloud Full set of blueprint changes: https://review.openstack.org/#/c/85098 https://review.openstack.org/#/c/85099 https://review.openstack.org/#/c/85100 Change-Id: I67d7c1362df323762023be5c74fbe75b1583570c
2014-05-20Merge "Specify group os-apply-config for config resources"Jenkins1-0/+2
2014-05-16Merge "Adding SNMPd auth credentials"Jenkins1-1/+16
2014-05-09Introduce configurable virtual ip in templatesDima Shulyak1-0/+24
added ControlVirtualIP resource of type OS::Neutron::Port Added ControlVirtualInterface - by default br-ex To specify the IP address to use as ControlVirtualIP, or for any others custom needs, you could provide: -P 'ControlFixedIPs=[{"ip_address" : "192.0.2.251"}]' Related to blueprint tripleo-icehouse-ha-production-configuration Change-Id: Ie82750ac1537c80311a869880f636bda59ca5c58
2014-05-08Defer to element mysql.innodb_buffer_pool_sizeClint Byrum1-2/+5
Choosing 100MB here is not a production default. We also don't need two places with the default value set. The closer a default is to the actual usage of it, the better, so we'll set 0 here, which will defer to the default in the element. Change-Id: I1b41b604286245c2fb83249778db835253c02fc5
2014-05-08Merge "Add NeutronControlPlaneID parameter"Jenkins1-0/+4
2014-05-07Merge "Make size of loop device used by cinder LVM configurable"Jenkins1-1/+6
2014-05-06Add NeutronControlPlaneID parameterDmitry Shulyak1-0/+4
Creation of OS::Neutron::Port requires network_id parameter OS::Neutron::Port will be used for VIP creation Creating port for network by name, e.g: neutron port-create ctlplane works only with neutron cli Change-Id: Ia8bd6f700a4897efd277fd67189d2e04ad716b87
2014-05-02Specify group os-apply-config for config resourcesSteve Baker1-0/+2
This will indicate to os-collect-config that this config resource represents os-apply-config configuration data, so it can only write out top-level config files for os-apply-config data (or Heat::Ungrouped for backwards compatibility). Change-Id: I3552fdd6df8106ab83cfd17d5f4b137cf33fbc36 Related-Bug: #1299109
2014-05-01Scale the control plane in hosts files.Robert Collins1-14/+80
Being able to figure out the hypervisors from the control nodes seems useful, and equally all the hypervisors should know about all the control nodes (at least until we have virtual IPs all in place), and lastly the control plane need to know each other by hostname. Change-Id: I92877501c58d8c210e7b2c94935e107355271fb9
2014-04-28Adding SNMPd auth credentialsLadislav Smola1-1/+16
-Undercloud Ceilometer has to have access to SNMPd credentials, so it can poll the Overcloud nodes -In every Overcloud node, we need to set the same cretentials to SNMPd.conf Change-Id: Icf7c0c1772b6380b7136108e61c15cafe17274ba
2014-04-25Make size of loop device used by cinder LVM configurableDuncan Thomas1-1/+6
This was hard-coded to 5 gig, which is useless for anything other than tempest runs and smoke testing block-storage-nfs.yaml has intentionally not been changed, since volume_size_mb is not used in that setup. Cleaning up that code will be done separately. Change-Id: I476b906a8d439d3e6643dd0c214965c5862418e8
2014-04-23Expose dnsmasq optionsJames Slagle1-0/+6
Adds a new parameter, NeutronDnsmasqOptions, to the overcloud template. Allows the ability to set dnsmasq options for neutron dhcp agent. This will allow us to configure mtu to be 1400 for tenant instances on the overcloud. This should help with poor network performance and vm's that are just plain unreachable via ssh due to the GRE tunnel overhead. The default here has been set to: dhcp-option-force=26,1400 This is the recommended way to configure OpenStack with the Open vSwitch plugin per: http://docs.openstack.org/admin-guide-cloud/content/openvswitch_plugin.html All the documentation I can find on the web (openstack-dev, ask.openstack.org, etc), recommend applying this setting. Others have reported slow vm performance as well, and this resolves that issue (apparently anyway...we'd need to test). Change-Id: If24326045987b5a484ba2f71f591092987966536 Partial-Bug: #1270646
2014-04-18Add passthrough configuration glue.Robert Collins1-0/+58
This provides a means for users to pass configuration through to the machines they are deploying without us modelling that. Change-Id: I7134eb0c6be2d5cb1795b2f03cfba4afb69dc837 blueprint: passthrough-config
2014-04-16Switch overcloud to software-configClint Byrum1-265/+147
This migrates the overcloud to using OS::Heat::StructuredConfig and OS::Heat::StructuredDeployment. With those tools, we can decouple servers from software configuration and begin to deprecate features in tripleo_heat_merge. Change-Id: Ice85f0711e90d0fabf1d1bc4698201c4d6758508
2014-04-09Stop using notCompute in favor of controllerDan Prince1-39/+39
Updates all references for notCompute and notcompute to use 'controller' instead. Change-Id: I70ef83f35064ab388bdc7e1a6da62b6585580010 Partial-bug: #1300324
2014-04-08Merge "Add mysql innodb buffer pool size"Jenkins1-0/+6
2014-04-08Merge "Allow setting the cinder iscsi-helper option"Jenkins1-0/+6
2014-04-01Add mysql innodb buffer pool sizeJan Provaznik1-0/+6
Innodb buffer pool size in mysql config file is now set to 592M, this value is for VMs with 2G RAM too much. This patch makes the pool size configurable and decreases default value to 100 MB (this should be sufficient for default devtest setup). A patch which for tripleo-image-element which sets this value in my.cnf will follow. Change-Id: I0d2529abe51d4dc34415bf6c40da7a267bf3e65b
2014-03-31Allow setting the cinder iscsi-helper optionBen Nemec1-0/+6
This is necessary to support iscsi helpers other than tgtadm, such as lioadm. Change-Id: I8a63872185f73372fcf6c90d3dde31e5bb0a168b
2014-03-26Update templates to default to preserve ephemeralCian O'Driscoll1-1/+1
Updated heat templates to default to preserve ephemeral partition on a heat stack update. Allows undercloud and overcloud to be re-imaged/updated and state preserved. Change-Id: I6626af48d8c55672022a46fe48e5725ad2619f0c
2014-03-21Pass undercloud metadata to overcloud computeAllison Randal1-0/+21
Capture some undercloud metadata into the overcloud compute configs, so the overcloud nodes can pull updated images from the undercloud glance. Unset by default, but able to be set during stack-create or stack-update. Change-Id: I2997d23c584055c40034827e9beb58e6542ea11c
2014-03-12Add heat.stack_domain_admin_passwordClint Byrum1-0/+6
This new parameter will be used to configure Heat for the new required stack domain admin. Change-Id: Ieace33154a14f472aab8ac76b2b876db77230110 Partial-Bug: #1287453
2014-03-11Merge "Add rabbit.cookie attribute"Jenkins1-0/+14
2014-03-05Merge "Add GlanceLogFile and GlanceNotifierStrategy"Jenkins1-0/+12
2014-03-05Merge "Make Wait Conditions depend on config creation"Jenkins1-1/+1
2014-02-26Make Wait Conditions depend on config creationClint Byrum1-1/+1
Currently our wait conditions are racing with Heat resolving configurations. There should be plenty of time but sometimes Heat may be dealing with a temporarily problematic Nova API and spinning on that. While that is happening, the in-instance tools will not have their full configuration available to them. We don't want the wait condition timeout to start until the box has had its actual config exposed to it. Change-Id: I0eab8fe7547d3cbcebb1559fd3d06206b1750e96
2014-02-26Add GlanceLogFile and GlanceNotifierStrategyJames Slagle1-0/+12
Expose 2 new parameters to control glance configuration: - GlanceLogFile - GlanceNotifierStrategy This will allow the glance configuration options log_file and notifier_strategy to be set in glance-api.conf and glance-registry.conf Change-Id: I1af1ecfdfe0859f2baba4579aab6e947a2a54308