| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch splits out the BootstrapNode config
such that alternate implementation (puppet for example)
can implement their own SoftwareConfig's via a nested stack.
This is controlled by the standard overcloud heat environment.
For os-apply-config deployments the implementation should work the
same as before.
For puppet deployments the implementation uses hiera metadata
to configure bootstrap_nodeid.
Change-Id: I691a9d7c474866038a5d47beab295899b5479d03
|
|
This patch splits out the allNodesConfig config
such that alternate implementation (puppet for example)
can implement their own SoftwareConfig's via a nested stack.
This is controlled by the standard overcloud heat environment.
For os-apply-config deployments the implementation should work the
same as before.
For puppet deployments the implementation uses hiera metadata
to configure rabbit_nodes. The puppet deployment doesn't support
hosts, or freeform sysctl metadata yet so those are the same
for now as well.
Change-Id: I34ae30b1f37aca8b39586f7e350511462d66f694
|
|
This patch splits out the SwiftDevicesAndProxy config
such that alternate implementation (puppet for example)
can implement their own SoftwareConfig's via a nested stack.
This is controlled by the standard overcloud heat environment.
For os-apply-config deployments the implementation should work the
same as before.
For puppet deployments the implementation uses hiera metadata
to configure swift devices.
Partial-bug: 1418805
Change-Id: Ibf6038460f36279ad51a04947589d4a03a553f66
|
|
This patch adds a new ControllerNodesPostDeployment resource
which can be used along with the environment file to
specify a nested stack which is guaranteed to execute
after all the Controller config (HA, or other) have
executed.
This is really useful for Puppet in that Heat actually
controls where puppet executes in the deployment
process and we want to ensure puppet runs after
all hiera configuration data has be deployed to
the nodes. With the previous approach some of the
data would be there, but most of the HA data which
actually gets composed outside of the controller-puppet.yaml
nested stack would not be guaranteed to be there in time.
As os-apply-config (tripleo-image-elements) have their
ordering controlled within the elements themselves an empty stubbed
in nested stack has been added so that we don't break that
implementation.
Partial-bug: 1418805
Change-Id: Icd6b2c9c1f9b057c28649ee3bdce0039f3fd8422
|
|
This cleans up the top level tree by moving all the puppet
related bits into the puppet directory. The only exception
is overcloud-resource-registry-puppet.yaml which is
the puppet environment file and is used externally.
Change-Id: Idb65a7143b0f29e5579d4e9d1642e4cda6f65d50
|
|
The new ceph-source.yaml file provides the config settings needed
by the elements which configure Ceph on controllers (monitors) and
storage nodes (OSDs) as well as the Cinder backend which uses it.
There is also a without-mergepy copy named ceph-storage.yaml
Change-Id: I954861536c41b2a7e6cbd86a0f0b55004eed4c70
|
|
This adds an option which enables package installation via
Yum when Puppet executes. Users might want to disable Yum
installation of packages via puppet when using pre-installed
images.
The option is off by default: meaning that Puppet will no
longer install packages by default. Users will need to
enable the EnablePackageInstall in order to get
the previous behavior.
The intent is to use the default_parameters section
of the Heat environment to allow users to cleanly enable this
features without wiring it into the top level. This is because
the new parameter is Puppet specific and doesn't really apply to
other implementations. Kilo Heat already has support for
default_parameters and so does python-heatclient.
NOTE: most TripleO users do not yet have the heatclient
features because setup-clienttools in tripleo-incubator only installs
releases via pip. It is for these reasons the default_parameters
section in overcloud-resource-registry-puppet.yaml is commented out
for now.
Change-Id: I3af71b801b87d080b367d9e4a1fb44c1bfea6e87
|
|
This patch implements the required changes to configure
common Cinder block storage nodes via Puppet.
Change-Id: Iac8b4679a00f58d5faac4a1d08b7a830f0360ba5
|
|
This patch implements the required changes to configure
swift storage nodes via Puppet. Similar to the overcloud
we generate the rings on each node (with the same seed).
Change-Id: I677c85b09b6e656b3ac1f938a4bd6bc7daae1755
|
|
In I250dc1a8c02626cf7d1a5d2ce92706504ec0c7de we split
out just the Controller software config in an effort
to provide hooks for alternate implementations (puppet).
This sort of worked but caused quirky ordering issues
with signal handling. It also causes problems for Tuskar
which would prefer to think of these nested stacks and
not have us split out just the software configs like this.
This patch moves all the compute related stuff for
our two implementations:
compute.yaml: is used by os-apply-config (uses the
tripleo-image-elements)
compute-puppet.yaml: uses stackforge puppet-* modules for
configuration
By duplicating the entire compute in this manner we make
it much easier to create dependencies and implement proper
signal handling. The only (temporary) downside is the duplication
of parameters most of which will eventually go away when we move
using the global parameters via Heat environment files instead.
Change-Id: I49175d1843520abc80fefe9528442e5dda151f5d
|
|
In I228216a0b55ff2d384b281d9ad2a61b93d58dab9 we split
out just the Controller software config in an effort
to provide hooks for alternate implementations (puppet).
This sort of worked but caused quirky ordering issues
with signal handling. It also causes problems for Tuskar
which would prefer to think of these nested stacks and
not have us split out just the software configs like this.
This patch moves all the controller related stuff for
our two implementations:
controller.yaml: is used by os-apply-config (uses the
tripleo-image-elements)
controller-puppet.yaml: uses stackforge puppet-* modules for
configuration
By duplicating the entire controller in this manner we make
it much easier to create dependencies and implement proper
signal handling. The only (temporary) downside is the duplication
of parameters most of which will eventually go away when we move towards
using the global parameters via Heat environment files instead.
Change-Id: Iaf3c889d7c8815f862308cd8e15ce1010059f5c6
|
|
This patch provides an alternate implementation of
the OS::TripleO::Controller::SoftwareConfig which uses Puppet
to drive the configuration. Using this it is possible
to create a fully functional overcloud controller instance
which has the controller node configured via Puppet
stackforge modules. Initially this includes only the
following services:
MySQL
RabbitMQ
Keepalived/HAProxy (HA is not yet fully supported however)
Nova
Neutron
Keystone
Glance (file backend)
Cinder
Using these services it is possible to run devtest_overcloud.sh
to completion. The idea is that we can quickly add more
services once we have CI in place.
In order to test this you'll want to build your images
with these elements:
os-net-config
heat-config-puppet
puppet-modules
hiera
None of the OpenStack specific TripleO elements
should be used with this approach (the nova/neutron
elements were NOT used to build the controller image).
Also, rather than use neutron-openvswitch-agent to configure
low level networking it is recommended that os-net-config
by configured directly via heat modeling rather than
parameter passing to init-neutron-ovs. This allows us to
configure the physical network while avoiding the coupling to
the neutron-openvswitch-element that our standard
parameter driven networking currently uses. (We still need
to move init-neutron-ovs so that it isn't coupled and/or deprecate
its use entirely because the heat drive stuff is more flexible.)
Packages may optionally be pre-installed via DIB using the
-p option (-p openstack-neutron,openstack-nova) etc.
Change-Id: If8462e4eacb08eced61a8b03fd7c3c4257e0b5b8
|
|
This patch provides an alternate implementation of
the OS::TripleO::Compute::SoftwareConfig which uses Puppet
to drive the configuration. Using this it is possible
to create a fully functional overcloud compute instance
which has the compute node configured via Puppet
stackforge modules. This includes all the Nova, Neutron,
and Ceilometer configuration required to make things work.
In order to test this you'll want to build your images
with these elements:
os-net-config
heat-config-puppet
puppet-modules
hiera
None of the OpenStack specific TripleO elements
should be used with this approach (the nova/neutron/ceilometer
elements were NOT used to build the compute image).
Also, rather than use neutron-openvswitch-agent to configure
low level networking it is recommended that os-net-config
by configured directly via heat modeling rather than
parameter passing to init-neutron-ovs. This allows us to
configure the physical network while avoiding the coupling to
the neutron-openvswitch-element that our standard
parameter driven networking currently uses. (We still need
to move init-neutron-ovs so that it isn't coupled and/or deprecate
its use entirely because the heat drive stuff is more flexible.)
Packages may optionally be pre-installed via DIB using the
-p option (-p openstack-neutron,openstack-nova).
Change-Id: Ic36be25d70f0a94ca07ffda6e0005669b81c1ac7
|
Dan Prince
Giulio Fidente