aboutsummaryrefslogtreecommitdiffstats
path: root/network
AgeCommit message (Collapse)AuthorFilesLines
2016-05-16Remove Nova EC2 deploymentEmilien Macchi2-135/+0
Nova EC2 does not exist anymore since Mitaka, parameters are already deprecated in Mitaka and send warnings to the Puppet catalog. The service has been replaced by ec2api project, where Puppet OpenStack team is currently writting a module. In the meantime we add support in TripleO, this patch removes all occurences of Nova EC2 configuration, which are useless and send warnings for nothing. Change-Id: Ief2d0e5c77b5ac58560606fee930fbd66c40ffc3
2016-05-12add heat-api-cfn to endpoint mapSteven Hardy2-0/+135
Change-Id: I8f98ce92fc387d2263fda738c1c8a209e3cbbb85
2016-04-29Use str_split to compute netmask in _v6 port templatesGiulio Fidente11-44/+22
Change-Id: I282dbc025500b1628d4f08a49b54a2adefd38b5f
2016-04-28Fix the Sahara public endpoint and make it point to the Public VIPGiulio Fidente2-4/+4
Change-Id: Iff287b9ea46100800e386efb98371be7ab48361f
2016-04-22Fix the ManagementNetValueSpecs param typeMatt Wisch1-1/+1
The ManagementNetValueSpecs param type is currently set to string. This change sets the param to the correct type of json, allowing the network value specs to correctly parse. Example Management Network value spec: {'provider:physical_network': 'management', 'provider:network_type': 'flat'} Change-Id: I5b12c7251690368d79a4d00725a9d6e0d5e75af8 Closes-Bug: #1573649
2016-04-21Fix controller-no-external.yaml in bonded configs.Dan Sneddon1-0/+31
For some reason the controller-no-external.yaml template is configured for DHCP on the control plane interface. We switched to static control plane IPs before the controller-no-external.yaml was created (IIRC), so I'm not sure how that happened. This change brings the controller-no-external.yaml in line with the rest of the bonded NIC templates. Change-Id: I2ac929e241707db72a0beabf9d5cd7fc14b90f76
2016-04-14Add GlanceRegistry to the endpoint mapDan Prince2-0/+45
This patch adds GlanceRegistry to the endpoint map. This will make accessing Glance registry setings via the endpoint map possible. Change-Id: I9186e56cd4746a60e65dc5ac12e6595ac56505f0
2016-04-11Deploy Gnocchi as a Ceilometer metrics storage backendPradeep Kilambi2-0/+127
* Deploy Gnocchi API. * Storage backends: swift, rbd and file. * Indexer backend default to mysql * Configure Ceilometer to send metrics datas to Gnocchi * Pacemaker config Depends-On: Ic8778a3104e0ed0460423e4bf857682220dc5802 Depends-On: I7d2eb9405e0171fc54fa0b616122f69db5f51ce2 Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: Ifde17b1ab8fa2b30544633e455e1c7eb475705aa
2016-04-11Don't have separate protocols/ports for Keystone v3Zane Bitter2-48/+32
The change in ab068a824ed51e78bf111387223e58e885ec5c84 is described as temporary, so it would be better if it did not affect the EndpointMap parameter (which is effectively a public interface, since it may be overridden in an environment file). No configuration should end up with different ports/protocols/hosts for Keystone v2 and v3, and somebody customising them should not have to account for them separately. Nor should things break when the need to distinguish between v2 and v3 endpoints goes away. This change removes the KeystoneV3* keys from the EndpointMap input and uses the Keystone* keys instead, so that any change to the internal organisation becomes transparent to the user. Change-Id: If4cdd9232f4dbc9f2af651bbdfe68f09dc26ed2e
2016-04-08Remove network/noop.yaml, use OS::Heat::NoneDan Prince1-3/+0
Removes the old noop nested stack template for networks and instead uses OS::Heat::None instead. This should avoid a few extra resource checks on create and update. Change-Id: Ia3d7f62dbda2705ffc3d9edcddebcd3ece3cc9d2
2016-04-06Add network ExtraConfig hookPierre Blanc2-0/+6
Adds a post-network hook to execute some tasks before nodes deployment. This hook is execute one time (not for each node) during network step. It can be useful to execute scripts or templates before creating nodes. For example, we can use this hook for : - Deploy stuff used during the deployment of nodes. - Deploying network, backup, monitoring infrastructure. Change-Id: I3e999d73b55c5c27f70f722ec63ec8f2150bb5aa
2016-04-01Disable Nova v3 APIJiri Stransky2-120/+0
Microversions since Nova API v2.1 are aimed to replace the v3 work. The /v2.1 is backwards compatible with the legacy /v2 endpoint. What we called in the past /v3 is now something defunct in-tree. The /v2.1 API is based on the v3 work, but there are many things that differ, in particular with the backwards-compat thing. We keep the /v2 path in api-paste.ini for making sure an upgrade doesn't trample operators and users but if you look in tree, that's redirecting to the v2.1 codepath (just not asking for microversions). In summary, we only need one endpoint, ie. /v2.1. Additional information at https://bugzilla.redhat.com/show_bug.cgi?id=1291291 Related-Bug: #1564372 Change-Id: I1654665663bc5a19c201f7d25407910654ac1308 Depends-On: I6d64b8bcd0f79f1f298ddc809e6d92fbc2985c45
2016-03-24Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins2-0/+127
2016-03-20Deploy Aodh services, replacing Ceilometer AlarmPradeep Kilambi2-0/+127
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config * Add migration logic to remove pcs resources Depends-On: I5333faa72e52d2aa2a622ac2d4b60825aadc52b5 Depends-On: Ib6c9c4c35da3fb55e0ca8e2d5a58ebaf4204d792 Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: Ib47a22884afb032ebc1655e1a4a06bfe70249134
2016-03-18Remove GlanceRegistry from EndpointMapGiulio Fidente2-127/+0
We don't need an endpoint for the glance-registry service, that is used by glance-api when needed and is not meant to be user-facing. Change-Id: Ia6c9dd6164d3b91adbc937d70fa74d5fbbfb28a3
2016-03-15Merge "Fix typos"Jenkins7-10/+10
2016-03-09Make External Load Balancer templates work with IPv6Dan Sneddon7-0/+406
This change modifies the network isolation templates that allow for fixed IP addresses on the controllers' IPs and VIPs, and makes them compatible with IPv6 addresses. The latest version of the patchset creates an from_service_v6.yaml in order to properly handle service VIPs on IPv6 networks. Note that since OVS is not currently compatible with IPv6 tunnel endpoints, this patch does not yet enable IPv6 for the Tenant network by default. Change-Id: If881b000c6000ec13b54c0ee39f1c8940f079ae3 Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
2016-03-08Fix typosSwapnil Kulkarni (coolsvap)7-10/+10
Multiple files in t-h-t were having small typos. Fixed in this patchset. . Change-Id: I82d7071747f47544990ed46e2be22931190406b3
2016-03-07Merge "Make the Neutron subnet ipv6_{ra,address}_mode configurable"Jenkins5-10/+50
2016-03-07Merge "Revert "Deploy Aodh services, replacing Ceilometer Alarm""Jenkins2-127/+0
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle2-127/+0
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-05Make the Neutron subnet ipv6_{ra,address}_mode configurableGiulio Fidente5-10/+50
Use of slaac does not permit stati assignment of IPs to a Neutron port, so we default to dhcpv6-stateful instead. Change-Id: Id7f104be60ae05785a3d0a33516d7875a4698ed1
2016-03-05Add IPv6 versions of the Controller NIC configsDan Sneddon4-1/+513
This change adds Controller NIC configs for the sample NIC config templates that are compatible with IPv6 on the External network. These controller-v6.yaml templates include a default route for IPv6 on the External network, and a default route for IPv4 on the Control Plane. The Heat parameters ExternalNetworkDefaultRoute and ControlPlaneDefaultRoute are used to set these values. Change-Id: Ifed8cb359eae1d9d623d3eb2fe40ea8a0d1d889a
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon32-2/+863
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-04Allow for usage of pre-allocated IPs for the management networkSteven Hardy2-0/+49
Id3d4f12235501ae77200430a2dc022f378dce336 added support for pre-allocated IPs on the other overlay networks, but because the patch adding the managment network (I0813a13f60a4f797be04b34258a2cffa9ea7e84f) was under review around the same time, we missed adding the from_pool capability to the ManagementNetwork. Change-Id: If99f37634d5da7e7fb7cfc31232e926bd5ff074a
2016-03-03Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins2-0/+127
2016-03-03Deploy Aodh services, replacing Ceilometer AlarmEmilien Macchi2-0/+127
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config Depends-On: I9e34485285829884d9c954b804e3bdd5d6e31635 Depends-On: I891985da9248a88c6ce2df1dd186881f582605ee Depends-On: Ied8ba5985f43a5c5b3be5b35a091aef6ed86572f Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: I58d419173e80d2462accf7324c987c71420fd5f6
2016-03-01endpoint_map: bump nova api from 2.0 to 2.1Emilien Macchi2-6/+6
Nova v2.1 allows to use the same API as 2.0 but with microversions support, which is the recommended way to discover the latest API version supported in the cloud. Change-Id: Id011de03d883001fd48dbbcfed53cb821607c7f3
2016-02-29Merge "Convert port cidr splitting to str_split"Jenkins13-52/+26
2016-02-25Add NovaVNCProxy back into endpoint_mapZane Bitter2-0/+126
Due to an incorrect rebase, d0dcb9401c868786df58f5801a431392b8e89df8 dropped the changes made in dd7602ad82100617126be26d80a6d3f67cb739ac to add a vncproxy to the endpoint map. This change restores them. Change-Id: Ifef7f955481405d5fe39ba48c8b1a79aa9c170f2
2016-02-24Generate the endpoint map staticallyZane Bitter4-595/+2334
A stack is an extremely heavyweight abstraction in Heat. Particularly in TripleO, every stack includes a copy of all the template and environment data for all of the stacks in the tree, all of which must be stored anew in the database. The EndpointMap abstraction created no fewer than 30 nested stacks, none of which contained any resources but which existed purely for the purpose of abstracting out some intrinsic functions used to calculate the endpoint URLs for the various services. This likely adds several GB to the memory requirements of the undercloud, and can cause things to slow to a crawl since all 30 nested stacks need to be queried whenever we need data from any one of them. This change eliminates the nested stacks and instead generates the endpoint map statically. This can be done offline in less than 250ms, allows the input data to be expressed in an even more human-readable form, and reduces the runtime overhead of the endpoints map by a factor of 31, all with no loss of functionality, compatibility or flexibility. Since we don't run a setup script to generate the tarball, the endpoint_map.yaml output is checked in to source control. The build script offers a --check option that can be used to make sure that the output file is up-to-date with the input data. Change-Id: I2df8f5569d81c1bde417ff5b12b06b7f1e19c336
2016-02-24Merge "Nova Neutron configuration now uses keystone v3 endpoint"Jenkins1-0/+32
2016-02-24Merge "Allow vncproxy to work with ssl enabled"Jenkins1-0/+28
2016-02-23Nova Neutron configuration now uses keystone v3 endpointDavid Moreau Simard1-0/+32
Our current nova-neutron configuration does not work with the latest puppet-nova. In particular, this patch[1]. This commit adds keystone v3 endpoints to the map and gets the nova::network::neutron configuration to use them. [1] https://github.com/openstack/puppet-nova/commit/d09868a59c451932d67c66101b725182d7066a14 Change-Id: Ifb8c23c81c665c2732fa5cd757760668b06a449a
2016-02-10Merge "Fix endpoint names"Jenkins1-5/+5
2016-02-02Fix endpoint namesZane Bitter1-5/+5
The commit daad3d4224f12d2c23c41a70cdf522e7c55536ba added a bunch of new endpoints, but failed to use the new input data in calculating the outputs: the GlanceRegistry ones use the Glance endpoints and the Horizon one the Heat endpoint. This would cause anything querying these endpoints from the endpoints map to get the wrong ports. Change-Id: I8e1780b26e285187142be41b4f3aae3efe7eaaee
2016-01-20Create linux bridge vlans environmentsJaume Devesa6-0/+626
Define environments to create VLANs attached to a single physical nic as 'single-nic-vlans' does, but using linux_bridge instead of ovs_bridge Change-Id: I8c6fe9ec7028178f783e7d9c0a1cc67a1517eb3d
2016-01-15Allow vncproxy to work with ssl enabledBen Nemec1-0/+28
Right now our vncproxy settings are hard-coded to http and the non-ssl port. This change adds a vncproxy entry to the endpoint map and uses those values to configure the proxy correctly on compute nodes. This is sufficient to get it working in my environment with ssl enabled. Change-Id: I9d69b088eef4700959b33c7e0eb44932949d7b71
2016-01-12Merge "Sahara Integration"Jenkins1-0/+34
2016-01-12Convert port cidr splitting to str_splitSteven Hardy13-52/+26
Previously we used an interim workaround which required a 2 digit subnet but now heat (as of liberty) has str_split, which was implemented for this purpose. Change-Id: I29bb5f407b717e26a09c8c661954ee07fff72d71
2016-01-08Sahara IntegrationEthan Gafford1-0/+34
Integration of OpenStack data processing service (sahara) with TripleO. - Deploys sahara in distributed mode (separate api and engine processes on each controller node) - Load balancing w/haproxy - RabbitMQ/MySQL supported per current TripleO standard - Minimal configurability at this time Change-Id: I77a6a69ed5691e3b1ba34e9ebb4d88c80019642c Partially-implements: blueprint sahara-integration Depends-On: I0f0a1dc2eaa57d8226bad8cfb250110296ab9614 Depends-On: Ib84cc59667616ec94e7edce2715cbd7dd944f4ae Depends-On: I9fe321fd4284f7bfd55bd2e69dcfe623ed6f8a2a
2016-01-08Merge "Fix yaml validation errors in multiple-nics templates"Jenkins4-4/+4
2016-01-06Merge "Align template defaults with the client"Jenkins1-1/+1
2015-12-18Fix yaml validation errors in multiple-nics templatesBen Nemec4-4/+4
One of the interfaces was not indented at the same level as the others in some of the templates. Change-Id: Iabd835724848d754d5522968e1c8e3cf9f78e6c6
2015-12-18Add Management Network For System Administration.Dan Sneddon26-17/+475
This change adds a system management network to all overcloud nodes. The purpose of this network is for system administration, for access to infrastructure services like DNS or NTP, or for monitoring. This allows the management network to be placed on a bond for redundancy, or for the system management network to be an out-of-band network with no routing in or out. The management network might also be configured as a default route instead of the provisioning 'ctlplane' network. This change does not enable the management network by default. An environment file named network-management.yaml may be included to enable the network and ports for each role. The included NIC config templates have been updated with a block that may be uncommented when the management network is enabled. This change also contains some minor cleanup to the NIC templates, particularly the multiple nic templates. Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
2015-12-18Align template defaults with the clientGiulio Fidente1-1/+1
This aligns the parameter default values from python-tripleoclient with tripleo-heat-templates. This is in preparation for removing all the defaults from the client, and maintaining them only in the templates. Change-Id: I7b635a250f1ecc170e18d8e434f0118c6fcbb942 Co-Authored-By: James Slagle <jslagle@redhat.com>
2015-12-15Allow for usage of pre-allocated IPs for the controller nodesGiulio Fidente15-2/+311
This change adds a new *_from_pool.yaml meant to return an IP from a list instead of allocating a Neutron port, useful to pick an IP from a pre-defined list and making it possible to configure, for example an external balancer in advance (or dns), with the future IPs of the controller nodes. The list of IPs is provided via parameter_defaults (in the ControllerIPs struct) using ControllerIPs param. Also some additional VipPort types are created for the *VirtualIP resources. The VIPs were previously created using the same port resource used by the nodes, but when deploying with an external balancer we want the VIP resource to be nooped instead. Change-Id: Id3d4f12235501ae77200430a2dc022f378dce336
2015-12-11Merge "Update typos"Jenkins13-13/+13
2015-12-03Merge "Make all network ports type to consume FixedIPs"Jenkins4-0/+28
2015-12-01Fix default route in multiple nics net isolation templatesDan Sneddon4-0/+12
The non-controller nodes in the network/config/multiple-nics directory do not have a default route configured. This change adds the default route to the non-controller nodes using the ControlPlaneDefaultRoute parameter, which was already a part of these templates. Change-Id: Idaaeb2a539555ac14cc613b202c428108bc19a30