Age | Commit message (Collapse) | Author | Files | Lines |
|
Previously we used an interim workaround which required a 2 digit subnet
but now heat (as of liberty) has str_split, which was implemented for this
purpose.
Change-Id: I29bb5f407b717e26a09c8c661954ee07fff72d71
|
|
This change adds a system management network to all overcloud
nodes. The purpose of this network is for system administration,
for access to infrastructure services like DNS or NTP, or for
monitoring. This allows the management network to be placed on a
bond for redundancy, or for the system management network to be
an out-of-band network with no routing in or out. The management
network might also be configured as a default route instead of the
provisioning 'ctlplane' network.
This change does not enable the management network by default. An
environment file named network-management.yaml may be included to
enable the network and ports for each role. The included NIC config
templates have been updated with a block that may be uncommented
when the management network is enabled.
This change also contains some minor cleanup to the NIC templates,
particularly the multiple nic templates.
Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
|
|
This change adds a new *_from_pool.yaml meant to return an IP from
a list instead of allocating a Neutron port, useful to pick an IP
from a pre-defined list and making it possible to configure, for
example an external balancer in advance (or dns), with the future
IPs of the controller nodes.
The list of IPs is provided via parameter_defaults (in the
ControllerIPs struct) using ControllerIPs param.
Also some additional VipPort types are created for the *VirtualIP
resources. The VIPs were previously created using the same port
resource used by the nodes, but when deploying with an external
balancer we want the VIP resource to be nooped instead.
Change-Id: Id3d4f12235501ae77200430a2dc022f378dce336
|
|
|
|
|
|
Change-Id: Id63c1bcfc34058eb7285698ba9bf86d1cf2025a6
|
|
Changes VipMap into a new NetVipMap resource which defaults to
being the same as the 'old' VipMap. An environment file can be
used to map NetVipMap instead to the net_vip_map_external.yaml
which allows for passing in explicit Virtual IP addresses.
It also ensures that references to the Virtual IPs are gathered
from the VipMap resource and allows for an empty ControlPlaneIP
parameter in the neutron port templates where it can be.
Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
Change-Id: Ifad32e18f12b9997e3f89e4afe3ebc4c30e14a86
|
|
This change adds to the internal_api, storage, storage_mgmt and
tenant network ports the FixedIPs param and make them consume it
when passed.
Change-Id: Ica2bca9f573b206cc60c9d572224a8cc7b9b8aa4
|
|
When using network isolation you might want to selective
move one of the services back to the default ctlplane network
by simply using the ServiceNetMap parameter. This patch
adds ctlplane to the output parameters for both
the net_ip_map and net_ip_list_map nested stacks so that
this is possible.
As part of this patch we also split out the NetIpSubnetMap
into its own unique nested stack so that the Heat input
parameters for this stack are more clearly named.
Change-Id: Iaa2dcaebeac896404e87ec0c635688b2a59a9e0f
|
|
This change brings PublicVirtualIP in line with the rest of the
VIPs in how it is created. This allows the network where
PublicVirtualIP is instantiated to be on cltplane when network
isolation is not used, and on the external network when network
isolation is used. This change removes the PublicVirtualNetwork
parameter, since it is no longer used. In order to continue to
support the PublicVirtualFixedIPs parameter, which is used to
provide a specific IP for the PublicVirtualIP, the FixedIP
parameter was added to cltplane_vip.yaml, vip.yaml, and
noop.yaml. The value of PublicVirtualIP is passed to FixedIP
in the VIP templates. This change also moves the default
network for keystone public api to the external net (which will
fallback to ctlplane if network isolation isn't used).
Change-Id: I3f5d35cbe55d3a148e95cf49dfbaad4874df960b
|
|
There are two files in network/ports which control the VIP
behavior called ctlplane_vip.yaml and vip.yaml. One of these
files was missing ControlPlaneNetwork, since it wasn't used
inside the template. Unfortunately, tuskar chokes on this,
even though Heat can build the stack just fine. This change
makes the vip.yaml and ctlplane_vip.yaml equivalent by adding
ControlPlaneNetwork to the vip.yaml template.
Change-Id: Ic20281e58a1130afe18d5aec505a3df199841fd5
|
|
The redis_vip should come from a Neutron Port as its cidr depends
on the Neutron Network configuration. This change adds 2 new files
and modifies 1 in the network/ports directory:
- noop.yaml - Passes through the ctlplane Controller IP (modified)
- ctlplane_vip.yaml - Creates a new VIP on the control plane
- vip.yaml - Creates a VIP on the named network (for isolated nets)
Also, changes to overcloud-without-mergepy.yaml create the
Redis Virtual IP. The standard resource registry was modified to
use noop.yaml for the new Redis VIP. The Puppet resource registry
was modified to use ctlplane_vip.yaml by default, but can be made
to use vip.yaml when network isolation is used by using an
environment file. vip.yaml will place the VIP according to the
ServiceNetMap, which can also be overridden.
We use this new VIP port definition to assign a VIP to Redis,
but follow-up patches will assign VIPs to the rest of the
services in a similar fashion.
Co-Authored-By: Dan Sneddon <dsneddon@redhat.com>
Change-Id: I2cb44ea7a057c4064d0e1999702623618ee3390c
|
|
For VIP ports we set an explicit name on the ports. This
patch adds an optional PortName parameter to the ports
objects which can be used to specify a name.
Change-Id: Iad0f5e4cfc31a931dbb574d9e589570125e9465c
|
|
This patch adds a new NetIpListMap abstraction which we can use
to make the all-nodes-config IP list network assignments
configurable. Ip address lists for all overcloud services
which require IPs were added to all-nodes-config so
that puppet manifests can be directly supplied the
correct network list for each service.
Change-Id: I209f2b4f97a4bb78648c54813dad8615770bcf1a
|
|
This patch adds a resource which constructs a Json output
parameter called net_ip_map which will allow us to easily
extract arbitrary IP addresses for each network using the
get_attr function in heat.
The goal is to use this data construct in each role
template to obtain the correct IP address on each
network.
Change-Id: I1a8c382651f8096f606ad38f78bbd76314fbae5f
|
|
This patch adds a set of templates to create ports on isolated
networks via Heat. There are 5 port templates in total
which are split out according to the available overcloud
networks.
Change-Id: I5175ef48c1960ea0d13fc8518328db53921c70cd
|