| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Master is now the development branch for pike
changing the release alias name.
Change-Id: I938e4a983e361aefcaa0bd9a4226c296c5823127
|
|
Heat now supports release name aliases, so we can replace
the inconsistent mix of date related versions with one consistent
version that aligns with the supported version of heat for this
t-h-t branch.
This should also help new users who sometimes copy/paste old templates
and discover intrinsic functions in the t-h-t docs don't work because
their template version is too old.
Change-Id: Ib415e7290fea27447460baa280291492df197e54
|
|
This change adds a new set of network templates with IPv6 subnets
that can be used instead of the existing IPv4 networks. Each network
can use either the IPv4 or IPv6 template, and the Neutron subnet will
be created with the specified IP version.
The default addresses used for the IPv6 networks use the fd00::/8
prefix for the internal isolated networks (this range is reserved
for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64
is used as an example default for the External network
(2001:db8::/32 are the documentation addresses [RFC3849]), but this
would ordinarily be a globally addressable subnet. These
parameters may be overridden in an environment file.
This change will require updates to the OpenStack Puppet
Modules to support IPv6 addresses in some of the hieradata values.
Many of the OPM modules already have IPv6 support to support IPv6
deployments in Packstack, but some OPM packages that apply only to
Instack/TripleO deployments need to be updated.
IPv6 addresses used in URLs need to be surrounded by brackets in
order to differentiate IP address from port number. This change
adds a new output to the network/ports resources for
ip_address_uri, which is an IP address with brackets in the case
of IPv6, and a raw IP address without brackets for IPv4 ports.
This change also updates some URLs which are constructed in Heat.
This has been tested and problems were found with Puppet not
accepting IPv6 addresses. This is addressed in the latest Puppet.
Additional changes were required to make this work with Ceph.
IPv6 tunnel endpoints with Open vSwitch are not yet supported
(although support is coming soon), so this review leaves the
Tenant network as an isolated IPv4 network for the time being.
Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
|
|
Id3d4f12235501ae77200430a2dc022f378dce336 added support for pre-allocated
IPs on the other overlay networks, but because the patch adding the
managment network (I0813a13f60a4f797be04b34258a2cffa9ea7e84f) was
under review around the same time, we missed adding the from_pool
capability to the ManagementNetwork.
Change-Id: If99f37634d5da7e7fb7cfc31232e926bd5ff074a
|
|
Previously we used an interim workaround which required a 2 digit subnet
but now heat (as of liberty) has str_split, which was implemented for this
purpose.
Change-Id: I29bb5f407b717e26a09c8c661954ee07fff72d71
|
|
This change adds a system management network to all overcloud
nodes. The purpose of this network is for system administration,
for access to infrastructure services like DNS or NTP, or for
monitoring. This allows the management network to be placed on a
bond for redundancy, or for the system management network to be
an out-of-band network with no routing in or out. The management
network might also be configured as a default route instead of the
provisioning 'ctlplane' network.
This change does not enable the management network by default. An
environment file named network-management.yaml may be included to
enable the network and ports for each role. The included NIC config
templates have been updated with a block that may be uncommented
when the management network is enabled.
This change also contains some minor cleanup to the NIC templates,
particularly the multiple nic templates.
Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
|
Carlos Camacho
Steven Hardy
Dan Sneddon