aboutsummaryrefslogtreecommitdiffstats
path: root/network/endpoints/endpoint_map.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-07-08Pass MysqlVirtualIP without brackets to EndpointMapGiulio Fidente1-0/+41
While the endpoints do need brackets around IPv6 addresses these are not wanted by some of the puppet classes so we must pass the non bracketed version as well. It will allow us to remove the need for the MysqlVirtualIP param passed to the controller role thouh when hieradata/database.yaml is emptied. Change-Id: If264b02a134b96368035f032e05d02e84f6499ed
2016-06-29Basic support for deploying Ironic in overcloudImre Farkas1-0/+121
Note that this change is not enough yet to deploy bare metal instances, it only deploys Ironic services themselves and makes sure they work. Also it does not support HA for now. Co-Authored-By: Dmitry Tantsur <dtansur@redhat.com> Partially-implements: blueprint ironic-integration Change-Id: I541be905022264e2d4828e7c46338f2e300df540
2016-05-30Pass MysqlVirtualIP via EndpointMapGiulio Fidente1-0/+39
By passing the MysqlVirtualIP via the EndpointMap we won't need it to be provided as a parameter to the services. This follows what is already happening for the glance registry service with I9186e56cd4746a60e65dc5ac12e6595ac56505f0. Change-Id: Iad2ab389bf64d0fc8b06eb0e7d29b5370ff27dff Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>
2016-05-19Merge "add heat-api-cfn to endpoint map"Jenkins1-0/+120
2016-05-16Remove Nova EC2 deploymentEmilien Macchi1-120/+0
Nova EC2 does not exist anymore since Mitaka, parameters are already deprecated in Mitaka and send warnings to the Puppet catalog. The service has been replaced by ec2api project, where Puppet OpenStack team is currently writting a module. In the meantime we add support in TripleO, this patch removes all occurences of Nova EC2 configuration, which are useless and send warnings for nothing. Change-Id: Ief2d0e5c77b5ac58560606fee930fbd66c40ffc3
2016-05-12add heat-api-cfn to endpoint mapSteven Hardy1-0/+120
Change-Id: I8f98ce92fc387d2263fda738c1c8a209e3cbbb85
2016-04-28Fix the Sahara public endpoint and make it point to the Public VIPGiulio Fidente1-3/+3
Change-Id: Iff287b9ea46100800e386efb98371be7ab48361f
2016-04-14Add GlanceRegistry to the endpoint mapDan Prince1-0/+40
This patch adds GlanceRegistry to the endpoint map. This will make accessing Glance registry setings via the endpoint map possible. Change-Id: I9186e56cd4746a60e65dc5ac12e6595ac56505f0
2016-04-11Deploy Gnocchi as a Ceilometer metrics storage backendPradeep Kilambi1-0/+118
* Deploy Gnocchi API. * Storage backends: swift, rbd and file. * Indexer backend default to mysql * Configure Ceilometer to send metrics datas to Gnocchi * Pacemaker config Depends-On: Ic8778a3104e0ed0460423e4bf857682220dc5802 Depends-On: I7d2eb9405e0171fc54fa0b616122f69db5f51ce2 Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: Ifde17b1ab8fa2b30544633e455e1c7eb475705aa
2016-04-11Don't have separate protocols/ports for Keystone v3Zane Bitter1-30/+27
The change in ab068a824ed51e78bf111387223e58e885ec5c84 is described as temporary, so it would be better if it did not affect the EndpointMap parameter (which is effectively a public interface, since it may be overridden in an environment file). No configuration should end up with different ports/protocols/hosts for Keystone v2 and v3, and somebody customising them should not have to account for them separately. Nor should things break when the need to distinguish between v2 and v3 endpoints goes away. This change removes the KeystoneV3* keys from the EndpointMap input and uses the Keystone* keys instead, so that any change to the internal organisation becomes transparent to the user. Change-Id: If4cdd9232f4dbc9f2af651bbdfe68f09dc26ed2e
2016-04-01Disable Nova v3 APIJiri Stransky1-117/+0
Microversions since Nova API v2.1 are aimed to replace the v3 work. The /v2.1 is backwards compatible with the legacy /v2 endpoint. What we called in the past /v3 is now something defunct in-tree. The /v2.1 API is based on the v3 work, but there are many things that differ, in particular with the backwards-compat thing. We keep the /v2 path in api-paste.ini for making sure an upgrade doesn't trample operators and users but if you look in tree, that's redirecting to the v2.1 codepath (just not asking for microversions). In summary, we only need one endpoint, ie. /v2.1. Additional information at https://bugzilla.redhat.com/show_bug.cgi?id=1291291 Related-Bug: #1564372 Change-Id: I1654665663bc5a19c201f7d25407910654ac1308 Depends-On: I6d64b8bcd0f79f1f298ddc809e6d92fbc2985c45
2016-03-24Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins1-0/+118
2016-03-20Deploy Aodh services, replacing Ceilometer AlarmPradeep Kilambi1-0/+118
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config * Add migration logic to remove pcs resources Depends-On: I5333faa72e52d2aa2a622ac2d4b60825aadc52b5 Depends-On: Ib6c9c4c35da3fb55e0ca8e2d5a58ebaf4204d792 Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: Ib47a22884afb032ebc1655e1a4a06bfe70249134
2016-03-18Remove GlanceRegistry from EndpointMapGiulio Fidente1-118/+0
We don't need an endpoint for the glance-registry service, that is used by glance-api when needed and is not meant to be user-facing. Change-Id: Ia6c9dd6164d3b91adbc937d70fa74d5fbbfb28a3
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle1-118/+0
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon1-1/+4
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-03Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins1-0/+118
2016-03-03Deploy Aodh services, replacing Ceilometer AlarmEmilien Macchi1-0/+118
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config Depends-On: I9e34485285829884d9c954b804e3bdd5d6e31635 Depends-On: I891985da9248a88c6ce2df1dd186881f582605ee Depends-On: Ied8ba5985f43a5c5b3be5b35a091aef6ed86572f Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: I58d419173e80d2462accf7324c987c71420fd5f6
2016-03-01endpoint_map: bump nova api from 2.0 to 2.1Emilien Macchi1-3/+3
Nova v2.1 allows to use the same API as 2.0 but with microversions support, which is the recommended way to discover the latest API version supported in the cloud. Change-Id: Id011de03d883001fd48dbbcfed53cb821607c7f3
2016-02-25Add NovaVNCProxy back into endpoint_mapZane Bitter1-0/+117
Due to an incorrect rebase, d0dcb9401c868786df58f5801a431392b8e89df8 dropped the changes made in dd7602ad82100617126be26d80a6d3f67cb739ac to add a vncproxy to the endpoint map. This change restores them. Change-Id: Ifef7f955481405d5fe39ba48c8b1a79aa9c170f2
2016-02-24Generate the endpoint map staticallyZane Bitter1-535/+1875
A stack is an extremely heavyweight abstraction in Heat. Particularly in TripleO, every stack includes a copy of all the template and environment data for all of the stacks in the tree, all of which must be stored anew in the database. The EndpointMap abstraction created no fewer than 30 nested stacks, none of which contained any resources but which existed purely for the purpose of abstracting out some intrinsic functions used to calculate the endpoint URLs for the various services. This likely adds several GB to the memory requirements of the undercloud, and can cause things to slow to a crawl since all 30 nested stacks need to be queried whenever we need data from any one of them. This change eliminates the nested stacks and instead generates the endpoint map statically. This can be done offline in less than 250ms, allows the input data to be expressed in an even more human-readable form, and reduces the runtime overhead of the endpoints map by a factor of 31, all with no loss of functionality, compatibility or flexibility. Since we don't run a setup script to generate the tarball, the endpoint_map.yaml output is checked in to source control. The build script offers a --check option that can be used to make sure that the output file is up-to-date with the input data. Change-Id: I2df8f5569d81c1bde417ff5b12b06b7f1e19c336
2016-02-24Merge "Nova Neutron configuration now uses keystone v3 endpoint"Jenkins1-0/+32
2016-02-24Merge "Allow vncproxy to work with ssl enabled"Jenkins1-0/+28
2016-02-23Nova Neutron configuration now uses keystone v3 endpointDavid Moreau Simard1-0/+32
Our current nova-neutron configuration does not work with the latest puppet-nova. In particular, this patch[1]. This commit adds keystone v3 endpoints to the map and gets the nova::network::neutron configuration to use them. [1] https://github.com/openstack/puppet-nova/commit/d09868a59c451932d67c66101b725182d7066a14 Change-Id: Ifb8c23c81c665c2732fa5cd757760668b06a449a
2016-02-02Fix endpoint namesZane Bitter1-5/+5
The commit daad3d4224f12d2c23c41a70cdf522e7c55536ba added a bunch of new endpoints, but failed to use the new input data in calculating the outputs: the GlanceRegistry ones use the Glance endpoints and the Horizon one the Heat endpoint. This would cause anything querying these endpoints from the endpoints map to get the wrong ports. Change-Id: I8e1780b26e285187142be41b4f3aae3efe7eaaee
2016-01-15Allow vncproxy to work with ssl enabledBen Nemec1-0/+28
Right now our vncproxy settings are hard-coded to http and the non-ssl port. This change adds a vncproxy entry to the endpoint map and uses those values to configure the proxy correctly on compute nodes. This is sufficient to get it working in my environment with ssl enabled. Change-Id: I9d69b088eef4700959b33c7e0eb44932949d7b71
2016-01-08Sahara IntegrationEthan Gafford1-0/+34
Integration of OpenStack data processing service (sahara) with TripleO. - Deploys sahara in distributed mode (separate api and engine processes on each controller node) - Load balancing w/haproxy - RabbitMQ/MySQL supported per current TripleO standard - Minimal configurability at this time Change-Id: I77a6a69ed5691e3b1ba34e9ebb4d88c80019642c Partially-implements: blueprint sahara-integration Depends-On: I0f0a1dc2eaa57d8226bad8cfb250110296ab9614 Depends-On: Ib84cc59667616ec94e7edce2715cbd7dd944f4ae Depends-On: I9fe321fd4284f7bfd55bd2e69dcfe623ed6f8a2a
2015-12-18Align template defaults with the clientGiulio Fidente1-1/+1
This aligns the parameter default values from python-tripleoclient with tripleo-heat-templates. This is in preparation for removing all the defaults from the client, and maintaining them only in the templates. Change-Id: I7b635a250f1ecc170e18d8e434f0118c6fcbb942 Co-Authored-By: James Slagle <jslagle@redhat.com>
2015-11-11Add the GlanceRegistry and Horizon endpoints to EndpointMapMark Chappell1-0/+35
We need to pass details of the Glance Registry and public Horizon endpoints to the load balancers so add them to the EndpointMap Change-Id: Ia6261223e7701734f47ce48471c86f690ba3dcd5
2015-11-11Make CloudName available for EndpointsMark Chappell1-0/+41
CloudName is the DNS name for the public VIP this means we will likely want it available for use in the endpoint hostnames, rather than people needing to copy and paste the same hostname Change-Id: Ic6d708b083244442195eee890de91bbc7e133ec2
2015-11-11Refacter Endpoints into EndpointMapMark Chappell1-0/+374
Because many of the service endpoints URLs use the same patterns for generating the URLs it makes sense to use the same templates to reduce the copy and paste. In the process also adds support for explicitly specifying hostnames for use in the endpoints. Note: DNS must be pre-configured. The Heat templates do not directly configure DNS. Change-Id: Ie3270909beca3d63f2d7e4bcb04c559380ddc54d Co-Authored-By: Juan Antonio Osorio Robles <jaosorior@redhat.com>