summaryrefslogtreecommitdiffstats
path: root/network/config
AgeCommit message (Collapse)AuthorFilesLines
2015-11-12Merge "Change default bond-mode"Jenkins1-2/+1
2015-11-11Change default bond-modeJoe Talerico1-2/+1
The default balance-tcp is causing issues with deployments. Defaulting to active-backup. After ~ 100 guests (total) connectivity to each guest would become spotty (simple pings would fail, then become successful.) In /var/log/messages we saw : "overcloud-controller-1 kernel: openvswitch: ovs-system: deferred action limit reached, drop recirc action" For more details, refer to this link: http://openvswitch.org/pipermail/discuss/2015-October/019168.html Change-Id: Ia0f2592a289e13472b98d97057cd516c5048fe59
2015-11-05Add network templates for multiple NIC configurationDan Sneddon6-0/+642
This change adds a set of network interface configurations for use with network isolation. The multiple-nics templates includes one separate NIC per network, and assumes that nic1 is used for the provisioning network (ctlplane). Also included is an environment file for including the multiple-nics configuration in a deployment. This revision changes the ordering of the NICs. By doing that, it is possible to wire up only a subset of the NICs for the storage nodes, and it is possilbe to leave the External NIC only configured on the controllers. rdo: Updated this commit for static control plane configuration Co-Authored-By: Rhys Oxenham <roxenham@redhat.com> Change-Id: Ic878d1ed1a85b5705295d087a743570ca8213504
2015-09-30Add DnsServers param to network config templatesDan Prince10-0/+50
This patch adds a new optional DnsServers parameter which can be used to provide a custom list of DNS resolvers which will be configured in resolv.conf. Change-Id: I2bb7259ebc09d786dc56da18694c862f802091b1 Depends-On: I9edecfdd4e1d0f39883b72be554cd92c5685881d
2015-09-17Configure ctlplane network with a static IPDan Prince10-66/+353
This patch updates all network configuration templates so that we configure the ctlplane network interface with a static IP instead of using DHCP. The IP address used for the static IP is passed into each nested stack network configuration template via the ControlPlaneIp parameter. Three new nested stack parameters called ControlPlaneSubnetCidr, ControlPlaneDefaultRoute, and EC2MetadataIp have been added to help configure the CIDR, default route, and EC2 metadata route on the ctlplane statically. These parameters can be customized via the parameter_defaults section in the heat environment. A single new template called net-config-static-bridge.yaml has been added to help migrate towards using the static configuration templates when not using network isolation. Depends-On: I257e1cba6dee16f73f75512d1284e1e3b9d4c831 Change-Id: Ib267e6dcf2d5ff77f7a82ee20a123965c2d07565
2015-08-17Remove hardcoded bridge name in bonded compute NIC configDan Sneddon1-1/+1
This change removes a hardcoded value for the bond name in the NIC config for the compute node in the bond-with-vlan NIC config templates. When this hardcoded value of "br-bond" is used, then the Neutron bridge mappings must be set to set to datacentre:br-bond in order for VLAN mode networking to recognize the bridge. By using the input value for bridge_name we will ensure that the controller and compute nodes have the same bridge name (defaults to "br-ex"), and that the defaults will work with VLAN mode. Change-Id: I28654ab93e3c10a8597c8b877f3f2f6b3eca887c
2015-07-24Add a default setting for BondInterfaceOvsOptionsDan Sneddon1-1/+2
This change adds a default setting for the OVS bond options to the bond-with-vlans controller.yaml. This default will attempt to bring up LACP bonding, but should that fail it will bring up the bond in active/backup mode. This is a safe configuration if the switch is not configured for bonding. Change-Id: I91aad1e061ed1ecf26636e60da7a9a6e9cde50a5
2015-06-29Add a default route to the external isolated networkDan Sneddon2-4/+20
This change adds a parameter for ExternalInterfaceDefaultRoute and uses that parameter to set the default route on the controller nodes. This allows Horizon and the public APIs to be reachable from routed networks outside the overcloud. Co-Authored-By: Dan Prince <dprince@redhat.com> Change-Id: I67a72767342237049f53f5085a6faf891fbf0c30
2015-06-27Remove bridge from nic1 in network bond templatesDan Sneddon5-51/+1
The bridge that is built on the bonds in the bond-with-vlans example has an extraneous bridge on the storage and compute templates, and an incorrect bridge on the controller template. There is no reason to do anything on nic1, which is assumed to be the provisioning interface, because it will be configured by DHCP. Also, on the controller template we actually want br-ex to contain the VLAN with the external network, rather than be configured on the provisioning interface. Change-Id: Ibe2343d5281f7b63a7b63b17d96d8442d0b96105
2015-06-18Merge "Fix grammar nits in bond-with-vlans templates"Jenkins5-5/+5
2015-06-16Configurable vlan_id's for isolated networksDan Prince10-32/+161
This patch adds parameters to configure the various vlan IDs to all of the bond-with-vlans and single-nic-vlans network config templates. Change-Id: Ia6196735927777b73879e8086568f8a435597c6c
2015-06-09Add BondInterfaceOvsOptions parameterDan Prince10-10/+30
This patch adds a new BondInterfaceOvsOptions to the bond-with-vlans network config templates. This can be used to configure things like LACP or the bonding mode via a nested stack heat parameter. The patch also removes the hard coded ovs_options relating to both bond-with-vlans and single-nic-with-vlans configurations which do not actually require this setting to be hard coded because by default OVS trunks vlan ports automatically. Change-Id: I3effbccba8ed7ed28d6ba715e5709275d4e7f984
2015-06-09network/config storage role fixesDan Prince6-14/+6
None of the storage roles have Heat parameters for the bridge name. Instead of wiring in Heat parameters for bridge name this patch hard codes the bridge name for the storage roles to 'br-storage'. This functionally fixes the network config scripts for each of the storage roles. For the single-nic-vlans storage roles we also remove the 'bond1' reference which was also incorrectly specified. Change-Id: I460d1a17e44ee49e960117ec85edd3ae25894333
2015-06-01os-net-config templates to configure vlansDan Prince6-0/+383
This patch adds 5 new role templates to help configure a vlans on top for each of the overcloud roles. This patch adds vlans on top of a single NIC attached to the control plane network (already used for provisioning). The patch also includes an environment file to enable configuration of vlans by simply sourcing this file. Change-Id: Ibc40e452dec9b372ff10442aab2bddaf382b0a2f
2015-05-26Fix grammar nits in bond-with-vlans templatesBen Nemec5-5/+5
Change-Id: Ifa59cf2f1f6b16bc785b19aef215659b95876237
2015-05-26os-net-config templates to configure vlans on bondDan Prince6-0/+462
This patch adds 5 new role templates to help configure an OVS bond with vlans on top for each of the overcloud roles. These are meant to represent a more production network which might use isolated nets, and should help facilitate create a CI job which configures a bond w/ vlans on it. The patch also includes an environment file to enable configuration of bonded vlans by simply sourcing this file. Change-Id: Ibe4c9d933445014ce3bec5fb3d7e3139fc40cb32