| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Wire in os-net-config via a normal script heat deployment, which has the
following advantages:
1. Improved error path, currently o-a-c deployments don't report any
errors, thus hang and eventually the deployment times out
2. It's far more hackable from a deployer perspective, e.g it's
much easier to change the os-net-config options or include a
mapping file
3. Reduces our dependencies on o-a-c (it's only os-net-config and hiera
which requires it), although the script does currently still use oac to
get the metadata IP.
4. May enable passing os-net-config yaml via a json parameter in future,
reducing the need for resource_registry mappings (although we'll have to
support that for backwards compatibility)
The script used is based directly on 20-os-net-config (from t-i-e
at cf94c5e, we can probably improve this now that we have an error path,
but for this initial commit it's a straight copy other than the changes to
replace o-a-c for rendering the json config file.
Co-Authored-By: Steven Hardy <shardy@redhat.com>
Change-Id: I0ed08332cfc49a579de2e83960f0d8047690b97a
|
|
This patch cleans up some inline comments that are a bit
non-standardly formatted so that we can more easily parse
these templates in an automated fashion.
Change-Id: Ibf91f3478fd894f9323d8805729ece9c5fab256f
|
|
This change adds the ManagementInterfaceDefaultRoute parameter
for setting the Management network as the default route in some
deployments. Notes were added to indicate that if the Management
network is used as the default gateway, then the default route
on the control plane should be commented out.
The sample network-environment.yaml was modified to include the
ManagementInterfaceDefaultRoute, but this is commented out like
the rest of the Management network parameters.
This change also adds the ControlPlaneDefaultRoute and
ExternalInterfaceDefaultRoute to all templates, so that if the
networks are customized, the NIC configs can be modified without
having to modify the parameters section of the template. The
default for the ExternalInterfaceDefaultRoute is '10.0.0.1', and
the default for ManagementInterfaceDefaultRoute is set to 'unset'.
This change also converts the single-nic-linux-bridge-vlans from
DHCP to static IPs on the Control Plane Interface, bringing these
templates in line with the rest of the NIC config templates. The
parameters needed to be updated in these templates as well.
The controller-v6.yaml templates had a default value of "10.0.0.1"
for the ExternalInterfaceDefaultRoute. This was confusing, and is
now undefined.
This change also sets a default gateway on the Control Plane in
controller-no-external.yaml templates.
Change-Id: I8ea6733fe46902e1baeff4ccfbcd42ecc5a1825f
|
|
This change adds Controller NIC configs for the sample NIC config
templates that are compatible with IPv6 on the External network.
These controller-v6.yaml templates include a default route for IPv6
on the External network, and a default route for IPv4 on the Control
Plane. The Heat parameters ExternalNetworkDefaultRoute and
ControlPlaneDefaultRoute are used to set these values.
Change-Id: Ifed8cb359eae1d9d623d3eb2fe40ea8a0d1d889a
|
|
This change adds a system management network to all overcloud
nodes. The purpose of this network is for system administration,
for access to infrastructure services like DNS or NTP, or for
monitoring. This allows the management network to be placed on a
bond for redundancy, or for the system management network to be
an out-of-band network with no routing in or out. The management
network might also be configured as a default route instead of the
provisioning 'ctlplane' network.
This change does not enable the management network by default. An
environment file named network-management.yaml may be included to
enable the network and ports for each role. The included NIC config
templates have been updated with a block that may be uncommented
when the management network is enabled.
This change also contains some minor cleanup to the NIC templates,
particularly the multiple nic templates.
Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
|
|
|
|
This patch adds a new optional DnsServers parameter
which can be used to provide a custom list of DNS
resolvers which will be configured in resolv.conf.
Change-Id: I2bb7259ebc09d786dc56da18694c862f802091b1
Depends-On: I9edecfdd4e1d0f39883b72be554cd92c5685881d
|
|
This patch updates all network configuration templates so that
we configure the ctlplane network interface with a static IP
instead of using DHCP.
The IP address used for the static IP is passed into each
nested stack network configuration template via the ControlPlaneIp
parameter.
Three new nested stack parameters called ControlPlaneSubnetCidr,
ControlPlaneDefaultRoute, and EC2MetadataIp have been added to help
configure the CIDR, default route, and EC2 metadata route on the ctlplane
statically. These parameters can be customized via the
parameter_defaults section in the heat environment.
A single new template called net-config-static-bridge.yaml has
been added to help migrate towards using the static
configuration templates when not using network isolation.
Depends-On: I257e1cba6dee16f73f75512d1284e1e3b9d4c831
Change-Id: Ib267e6dcf2d5ff77f7a82ee20a123965c2d07565
|
|
This patch adds extra heat environments that can be used
to enable network isolation without using the external
network. Instead of a separate external network the ctlplane
will be used for all of the external/public traffic.
Change-Id: Ia542cee02121771d7d57ac701b62d7608e8d1855
|
|
This change adds a parameter for ExternalInterfaceDefaultRoute
and uses that parameter to set the default route on the controller
nodes. This allows Horizon and the public APIs to be reachable from
routed networks outside the overcloud.
Co-Authored-By: Dan Prince <dprince@redhat.com>
Change-Id: I67a72767342237049f53f5085a6faf891fbf0c30
|
|
This patch adds parameters to configure the various
vlan IDs to all of the bond-with-vlans and single-nic-vlans
network config templates.
Change-Id: Ia6196735927777b73879e8086568f8a435597c6c
|
|
This patch adds a new BondInterfaceOvsOptions to the
bond-with-vlans network config templates. This can
be used to configure things like LACP or the bonding mode
via a nested stack heat parameter.
The patch also removes the hard coded ovs_options relating
to both bond-with-vlans and single-nic-with-vlans configurations
which do not actually require this setting to be hard coded
because by default OVS trunks vlan ports automatically.
Change-Id: I3effbccba8ed7ed28d6ba715e5709275d4e7f984
|
|
None of the storage roles have Heat parameters for the bridge
name. Instead of wiring in Heat parameters for bridge name
this patch hard codes the bridge name for the storage roles
to 'br-storage'.
This functionally fixes the network config scripts for each
of the storage roles.
For the single-nic-vlans storage roles we also remove
the 'bond1' reference which was also incorrectly specified.
Change-Id: I460d1a17e44ee49e960117ec85edd3ae25894333
|
|
This patch adds 5 new role templates to help configure
a vlans on top for each of the overcloud roles. This
patch adds vlans on top of a single NIC attached to
the control plane network (already used for provisioning).
The patch also includes an environment file to
enable configuration of vlans by simply sourcing this file.
Change-Id: Ibc40e452dec9b372ff10442aab2bddaf382b0a2f
|
Dan Prince
Dan Sneddon
Jenkins