summaryrefslogtreecommitdiffstats
path: root/network/config/single-nic-vlans/controller.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-11-28Apply os-net-config with a script instead of elementDan Prince1-59/+58
Wire in os-net-config via a normal script heat deployment, which has the following advantages: 1. Improved error path, currently o-a-c deployments don't report any errors, thus hang and eventually the deployment times out 2. It's far more hackable from a deployer perspective, e.g it's much easier to change the os-net-config options or include a mapping file 3. Reduces our dependencies on o-a-c (it's only os-net-config and hiera which requires it), although the script does currently still use oac to get the metadata IP. 4. May enable passing os-net-config yaml via a json parameter in future, reducing the need for resource_registry mappings (although we'll have to support that for backwards compatibility) The script used is based directly on 20-os-net-config (from t-i-e at cf94c5e, we can probably improve this now that we have an error path, but for this initial commit it's a straight copy other than the changes to replace o-a-c for rendering the json config file. Co-Authored-By: Steven Hardy <shardy@redhat.com> Change-Id: I0ed08332cfc49a579de2e83960f0d8047690b97a
2016-08-08Updates and fixes to NIC config template routesDan Sneddon1-1/+16
This change adds the ManagementInterfaceDefaultRoute parameter for setting the Management network as the default route in some deployments. Notes were added to indicate that if the Management network is used as the default gateway, then the default route on the control plane should be commented out. The sample network-environment.yaml was modified to include the ManagementInterfaceDefaultRoute, but this is commented out like the rest of the Management network parameters. This change also adds the ControlPlaneDefaultRoute and ExternalInterfaceDefaultRoute to all templates, so that if the networks are customized, the NIC configs can be modified without having to modify the parameters section of the template. The default for the ExternalInterfaceDefaultRoute is '10.0.0.1', and the default for ManagementInterfaceDefaultRoute is set to 'unset'. This change also converts the single-nic-linux-bridge-vlans from DHCP to static IPs on the Control Plane Interface, bringing these templates in line with the rest of the NIC config templates. The parameters needed to be updated in these templates as well. The controller-v6.yaml templates had a default value of "10.0.0.1" for the ExternalInterfaceDefaultRoute. This was confusing, and is now undefined. This change also sets a default gateway on the Control Plane in controller-no-external.yaml templates. Change-Id: I8ea6733fe46902e1baeff4ccfbcd42ecc5a1825f
2016-03-05Add IPv6 versions of the Controller NIC configsDan Sneddon1-1/+1
This change adds Controller NIC configs for the sample NIC config templates that are compatible with IPv6 on the External network. These controller-v6.yaml templates include a default route for IPv6 on the External network, and a default route for IPv4 on the Control Plane. The Heat parameters ExternalNetworkDefaultRoute and ControlPlaneDefaultRoute are used to set these values. Change-Id: Ifed8cb359eae1d9d623d3eb2fe40ea8a0d1d889a
2015-12-18Add Management Network For System Administration.Dan Sneddon1-0/+14
This change adds a system management network to all overcloud nodes. The purpose of this network is for system administration, for access to infrastructure services like DNS or NTP, or for monitoring. This allows the management network to be placed on a bond for redundancy, or for the system management network to be an out-of-band network with no routing in or out. The management network might also be configured as a default route instead of the provisioning 'ctlplane' network. This change does not enable the management network by default. An environment file named network-management.yaml may be included to enable the network and ports for each role. The included NIC config templates have been updated with a block that may be uncommented when the management network is enabled. This change also contains some minor cleanup to the NIC templates, particularly the multiple nic templates. Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
2015-09-30Add DnsServers param to network config templatesDan Prince1-0/+5
This patch adds a new optional DnsServers parameter which can be used to provide a custom list of DNS resolvers which will be configured in resolv.conf. Change-Id: I2bb7259ebc09d786dc56da18694c862f802091b1 Depends-On: I9edecfdd4e1d0f39883b72be554cd92c5685881d
2015-09-17Configure ctlplane network with a static IPDan Prince1-9/+31
This patch updates all network configuration templates so that we configure the ctlplane network interface with a static IP instead of using DHCP. The IP address used for the static IP is passed into each nested stack network configuration template via the ControlPlaneIp parameter. Three new nested stack parameters called ControlPlaneSubnetCidr, ControlPlaneDefaultRoute, and EC2MetadataIp have been added to help configure the CIDR, default route, and EC2 metadata route on the ctlplane statically. These parameters can be customized via the parameter_defaults section in the heat environment. A single new template called net-config-static-bridge.yaml has been added to help migrate towards using the static configuration templates when not using network isolation. Depends-On: I257e1cba6dee16f73f75512d1284e1e3b9d4c831 Change-Id: Ib267e6dcf2d5ff77f7a82ee20a123965c2d07565
2015-06-29Add a default route to the external isolated networkDan Sneddon1-0/+8
This change adds a parameter for ExternalInterfaceDefaultRoute and uses that parameter to set the default route on the controller nodes. This allows Horizon and the public APIs to be reachable from routed networks outside the overcloud. Co-Authored-By: Dan Prince <dprince@redhat.com> Change-Id: I67a72767342237049f53f5085a6faf891fbf0c30
2015-06-16Configurable vlan_id's for isolated networksDan Prince1-5/+25
This patch adds parameters to configure the various vlan IDs to all of the bond-with-vlans and single-nic-vlans network config templates. Change-Id: Ia6196735927777b73879e8086568f8a435597c6c
2015-06-09Add BondInterfaceOvsOptions parameterDan Prince1-1/+0
This patch adds a new BondInterfaceOvsOptions to the bond-with-vlans network config templates. This can be used to configure things like LACP or the bonding mode via a nested stack heat parameter. The patch also removes the hard coded ovs_options relating to both bond-with-vlans and single-nic-with-vlans configurations which do not actually require this setting to be hard coded because by default OVS trunks vlan ports automatically. Change-Id: I3effbccba8ed7ed28d6ba715e5709275d4e7f984
2015-06-01os-net-config templates to configure vlansDan Prince1-0/+82
This patch adds 5 new role templates to help configure a vlans on top for each of the overcloud roles. This patch adds vlans on top of a single NIC attached to the control plane network (already used for provisioning). The patch also includes an environment file to enable configuration of vlans by simply sourcing this file. Change-Id: Ibc40e452dec9b372ff10442aab2bddaf382b0a2f