aboutsummaryrefslogtreecommitdiffstats
path: root/network/config/bond-with-vlans/controller-no-external.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-08-25Add constraint to prohibit balance-tcp from BondInterfaceOvsOptionsBrent Eagles1-0/+5
This patch adds an allowed_pattern contraint that uses a negative lookahead assertion to only allow options strings that do not contain the 'balance-tcp' option. Change-Id: Icf8874e4e585f9a42d38091f8b38c3685f403cf1 Partial-Bug: #1612786
2016-08-08Updates and fixes to NIC config template routesDan Sneddon1-0/+16
This change adds the ManagementInterfaceDefaultRoute parameter for setting the Management network as the default route in some deployments. Notes were added to indicate that if the Management network is used as the default gateway, then the default route on the control plane should be commented out. The sample network-environment.yaml was modified to include the ManagementInterfaceDefaultRoute, but this is commented out like the rest of the Management network parameters. This change also adds the ControlPlaneDefaultRoute and ExternalInterfaceDefaultRoute to all templates, so that if the networks are customized, the NIC configs can be modified without having to modify the parameters section of the template. The default for the ExternalInterfaceDefaultRoute is '10.0.0.1', and the default for ManagementInterfaceDefaultRoute is set to 'unset'. This change also converts the single-nic-linux-bridge-vlans from DHCP to static IPs on the Control Plane Interface, bringing these templates in line with the rest of the NIC config templates. The parameters needed to be updated in these templates as well. The controller-v6.yaml templates had a default value of "10.0.0.1" for the ExternalInterfaceDefaultRoute. This was confusing, and is now undefined. This change also sets a default gateway on the Control Plane in controller-no-external.yaml templates. Change-Id: I8ea6733fe46902e1baeff4ccfbcd42ecc5a1825f
2016-04-21Fix controller-no-external.yaml in bonded configs.Dan Sneddon1-0/+31
For some reason the controller-no-external.yaml template is configured for DHCP on the control plane interface. We switched to static control plane IPs before the controller-no-external.yaml was created (IIRC), so I'm not sure how that happened. This change brings the controller-no-external.yaml in line with the rest of the bonded NIC templates. Change-Id: I2ac929e241707db72a0beabf9d5cd7fc14b90f76
2015-12-18Add Management Network For System Administration.Dan Sneddon1-0/+17
This change adds a system management network to all overcloud nodes. The purpose of this network is for system administration, for access to infrastructure services like DNS or NTP, or for monitoring. This allows the management network to be placed on a bond for redundancy, or for the system management network to be an out-of-band network with no routing in or out. The management network might also be configured as a default route instead of the provisioning 'ctlplane' network. This change does not enable the management network by default. An environment file named network-management.yaml may be included to enable the network and ports for each role. The included NIC config templates have been updated with a block that may be uncommented when the management network is enabled. This change also contains some minor cleanup to the NIC templates, particularly the multiple nic templates. Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
2015-08-06Support network isolation without external netsDan Prince1-0/+114
This patch adds extra heat environments that can be used to enable network isolation without using the external network. Instead of a separate external network the ctlplane will be used for all of the external/public traffic. Change-Id: Ia542cee02121771d7d57ac701b62d7608e8d1855