summaryrefslogtreecommitdiffstats
path: root/network/config/bond-with-vlans/compute.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-08-25Add constraint to prohibit balance-tcp from BondInterfaceOvsOptionsBrent Eagles1-0/+5
This patch adds an allowed_pattern contraint that uses a negative lookahead assertion to only allow options strings that do not contain the 'balance-tcp' option. Change-Id: Icf8874e4e585f9a42d38091f8b38c3685f403cf1 Partial-Bug: #1612786
2016-08-08Updates and fixes to NIC config template routesDan Sneddon1-0/+22
This change adds the ManagementInterfaceDefaultRoute parameter for setting the Management network as the default route in some deployments. Notes were added to indicate that if the Management network is used as the default gateway, then the default route on the control plane should be commented out. The sample network-environment.yaml was modified to include the ManagementInterfaceDefaultRoute, but this is commented out like the rest of the Management network parameters. This change also adds the ControlPlaneDefaultRoute and ExternalInterfaceDefaultRoute to all templates, so that if the networks are customized, the NIC configs can be modified without having to modify the parameters section of the template. The default for the ExternalInterfaceDefaultRoute is '10.0.0.1', and the default for ManagementInterfaceDefaultRoute is set to 'unset'. This change also converts the single-nic-linux-bridge-vlans from DHCP to static IPs on the Control Plane Interface, bringing these templates in line with the rest of the NIC config templates. The parameters needed to be updated in these templates as well. The controller-v6.yaml templates had a default value of "10.0.0.1" for the ExternalInterfaceDefaultRoute. This was confusing, and is now undefined. This change also sets a default gateway on the Control Plane in controller-no-external.yaml templates. Change-Id: I8ea6733fe46902e1baeff4ccfbcd42ecc5a1825f
2015-12-18Add Management Network For System Administration.Dan Sneddon1-0/+16
This change adds a system management network to all overcloud nodes. The purpose of this network is for system administration, for access to infrastructure services like DNS or NTP, or for monitoring. This allows the management network to be placed on a bond for redundancy, or for the system management network to be an out-of-band network with no routing in or out. The management network might also be configured as a default route instead of the provisioning 'ctlplane' network. This change does not enable the management network by default. An environment file named network-management.yaml may be included to enable the network and ports for each role. The included NIC config templates have been updated with a block that may be uncommented when the management network is enabled. This change also contains some minor cleanup to the NIC templates, particularly the multiple nic templates. Change-Id: I0813a13f60a4f797be04b34258a2cffa9ea7e84f
2015-09-30Add DnsServers param to network config templatesDan Prince1-0/+5
This patch adds a new optional DnsServers parameter which can be used to provide a custom list of DNS resolvers which will be configured in resolv.conf. Change-Id: I2bb7259ebc09d786dc56da18694c862f802091b1 Depends-On: I9edecfdd4e1d0f39883b72be554cd92c5685881d
2015-09-17Configure ctlplane network with a static IPDan Prince1-6/+38
This patch updates all network configuration templates so that we configure the ctlplane network interface with a static IP instead of using DHCP. The IP address used for the static IP is passed into each nested stack network configuration template via the ControlPlaneIp parameter. Three new nested stack parameters called ControlPlaneSubnetCidr, ControlPlaneDefaultRoute, and EC2MetadataIp have been added to help configure the CIDR, default route, and EC2 metadata route on the ctlplane statically. These parameters can be customized via the parameter_defaults section in the heat environment. A single new template called net-config-static-bridge.yaml has been added to help migrate towards using the static configuration templates when not using network isolation. Depends-On: I257e1cba6dee16f73f75512d1284e1e3b9d4c831 Change-Id: Ib267e6dcf2d5ff77f7a82ee20a123965c2d07565
2015-08-17Remove hardcoded bridge name in bonded compute NIC configDan Sneddon1-1/+1
This change removes a hardcoded value for the bond name in the NIC config for the compute node in the bond-with-vlan NIC config templates. When this hardcoded value of "br-bond" is used, then the Neutron bridge mappings must be set to set to datacentre:br-bond in order for VLAN mode networking to recognize the bridge. By using the input value for bridge_name we will ensure that the controller and compute nodes have the same bridge name (defaults to "br-ex"), and that the defaults will work with VLAN mode. Change-Id: I28654ab93e3c10a8597c8b877f3f2f6b3eca887c
2015-06-27Remove bridge from nic1 in network bond templatesDan Sneddon1-10/+0
The bridge that is built on the bonds in the bond-with-vlans example has an extraneous bridge on the storage and compute templates, and an incorrect bridge on the controller template. There is no reason to do anything on nic1, which is assumed to be the provisioning interface, because it will be configured by DHCP. Also, on the controller template we actually want br-ex to contain the VLAN with the external network, rather than be configured on the provisioning interface. Change-Id: Ibe2343d5281f7b63a7b63b17d96d8442d0b96105
2015-06-18Merge "Fix grammar nits in bond-with-vlans templates"Jenkins1-1/+1
2015-06-16Configurable vlan_id's for isolated networksDan Prince1-3/+15
This patch adds parameters to configure the various vlan IDs to all of the bond-with-vlans and single-nic-vlans network config templates. Change-Id: Ia6196735927777b73879e8086568f8a435597c6c
2015-06-09Add BondInterfaceOvsOptions parameterDan Prince1-1/+6
This patch adds a new BondInterfaceOvsOptions to the bond-with-vlans network config templates. This can be used to configure things like LACP or the bonding mode via a nested stack heat parameter. The patch also removes the hard coded ovs_options relating to both bond-with-vlans and single-nic-with-vlans configurations which do not actually require this setting to be hard coded because by default OVS trunks vlan ports automatically. Change-Id: I3effbccba8ed7ed28d6ba715e5709275d4e7f984
2015-05-26Fix grammar nits in bond-with-vlans templatesBen Nemec1-1/+1
Change-Id: Ifa59cf2f1f6b16bc785b19aef215659b95876237
2015-05-26os-net-config templates to configure vlans on bondDan Prince1-0/+88
This patch adds 5 new role templates to help configure an OVS bond with vlans on top for each of the overcloud roles. These are meant to represent a more production network which might use isolated nets, and should help facilitate create a CI job which configures a bond w/ vlans on it. The patch also includes an environment file to enable configuration of bonded vlans by simply sourcing this file. Change-Id: Ibe4c9d933445014ce3bec5fb3d7e3139fc40cb32