aboutsummaryrefslogtreecommitdiffstats
path: root/extraconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-09-01Merge "Restart only services that need it"Jenkins1-8/+16
2016-08-31Restart only services that need itJiri Stransky1-8/+16
With new pacemaker architecture, Puppet handles restarts of most of the services. There are several still managed by pacemaker which need special restart handling utilizing pacemaker and its resource agents. The counterpart in puppet-tripleo requests restarts for individual pacemaker-managed services by writing out "restart flag" files, and the pacemaker_resource_restart.sh script then performs the restarts. Change-Id: Ia4e6a9f88181f1981993f046cf415dbbcdc9570e Closes-Bug: #1614967 Closes-Bug: #1587015 Depends-On: I6369ab0c82dbf3c8f21043f8aa9ab810744ddc12
2016-08-30Merge "M/N upgrade fix galera restart."Jenkins1-11/+16
2016-08-30Merge "Upgrade ceph-mon"Jenkins2-0/+81
2016-08-30Merge "Fix check of rpm-python."Jenkins1-1/+1
2016-08-29Upgrade ceph-monGiulio Fidente2-0/+81
Adds a pre-requisite software deployment to the pacemaker scenario upgrade which, before the openstack services are upgraded, upgrades the ceph-mon daemon from Hammer to Jewel. Change-Id: I9855d80a6ae156b4a9e0409c3c927068b9db95a0
2016-08-29Merge "M/N upgrade set scheduler_host_manager right."Jenkins1-0/+2
2016-08-26Merge "M/N upgrade fail to restart nova-scheduler."Jenkins1-0/+1
2016-08-26M/N upgrade fix galera restart.Sofer Athlan-Guyot1-11/+16
We have to recreate the /var/lib/mysql directory on all controller node, not just the boostrap node for the cluster to be able to restart. Adding a warning on the fact that those script are local and know nothing about the good upgrade state of the other nodes. Closes-Bug: 1612642 Change-Id: I48e2812d7df80bbf2db53a8b71dc434d4209a160
2016-08-26Fix check of rpm-python.Sofer Athlan-Guyot1-1/+1
There is a typo in the code, making this test always successful. Closes-Bug: 1614437 Change-Id: Ia6b0b156294de9fcb8f66fc46aa8801555775a56
2016-08-26M/N upgrade set scheduler_host_manager right.Sofer Athlan-Guyot1-0/+2
scheduler_host_manager doesn't take nova.scheduler.host_manager.HostManager as a value anymore. This fix it before restarting the service. Change-Id: Ia9adcfd5a898f0c712b4a37ae33db88a44630f0d Closes-Bug: 1615035
2016-08-26Merge "Update pacemaker_resource_restart.sh for new HA arch"Jenkins1-25/+8
2016-08-25Merge "Clean up old functions"Jenkins1-61/+0
2016-08-24Clean up old functionsPradeep Kilambi1-61/+0
These are not needed any more as they were specific to mitaka upgrades. Change-Id: I0d421b942e620403f88374e1c82105747d8d84c9
2016-08-24M/N upgrade fail to restart nova-scheduler.Sofer Athlan-Guyot1-0/+1
The nova api db need to be synchronized as well. Change-Id: I2628b24ff1153c84cbf388455666ae42570cb10f Closes-Bug: 1615042
2016-08-24Fix check for MariaDB upgrade manual switch offJiri Stransky1-1/+1
The MySqlMajorUpgrade parameter has validation on it allowing only values yes/no/auto, however in the script we checked for '0' instead of 'no', which means the only effective values were yes/auto. This is now fixed to allow switching the migration off. Change-Id: I5d64734894c6bfd9003ad643f3747e34e62465cc Closes-Bug: #1616429
2016-08-22Don't trigger mariadb upgrade dump/restore when not neededJiri Stransky1-2/+2
When upgrading from mariadb X.Y.Z to mariadb X.Y.Ž (X.Y part stays the same), the dump/restore of mariadb shouldn't be necessary. Therefore we now only check for up to the first 2 fields of the version string when determining if we should trigger the dump/restore operation. Closes-Bug: #1615721 Change-Id: Ib7af8bfb121f5c83184d51b3c6dc657108c25973
2016-08-17Upgrade scripts to migrate aodh alarm dataPradeep Kilambi2-0/+52
In Newton, Aodh will be using its own mysql DB rather than using ceilometer's mongo instance. This means we need to migrate any existing alarm and alrm history data from ceilometer DB to aodh mysqlDB. Upstream aodh provides us with a aodh-data-migration utility. We need to invoke this during the mitaka->newton upgrade procedure so data is migrated as expected and aodh mysql backend takes over. Closes-bug: #1611794 Change-Id: I17888b57ecf98cd83e92af2f9cdbead066b03aa3
2016-08-16Update pacemaker_resource_restart.sh for new HA archJames Slagle1-25/+8
Given the new HA architecture with less pacemaker managed resources, we need to update this script to reflect those changes. Without these changes, stack-updates using the exact same templates will fail since this script is always executed on update. Change-Id: I2ce1681d19d4a24a7561e3dd9c5efdae40d030b7 Closes-Bug: #1612667
2016-07-28Merge "Allow to manually disable post-puppet restarts"Jenkins2-13/+30
2016-07-05Convert AllNodesExtraConfig to OS::Heat::NoneSteven Hardy1-25/+0
Instead of creating a nested stack, as it's slightly lower overhead and will make things easier when adding custom roles (where a hard-coded default template can't work) Change-Id: If9f8294ba477d1c1364e19a52152905a2c02e959
2016-07-05Remove config_identifier from all_nodes extraconfig examplesSteven Hardy5-26/+3
Since https://review.openstack.org/#/c/315616 this is no longer required. Change-Id: I0452d1577a25d19b4351bfe7830a6c7bbe485e67
2016-07-04Merge "Dump and restore galera db during major upgrades"Jenkins3-0/+184
2016-06-29Dump and restore galera db during major upgradesMichele Baldessari3-0/+184
When the overcloud is upgraded we do a yum update of the packages. This step might introduce a newer galera version. In such a situation we need to dump the db and restore it. The high-level workflow should be the following: 1) During the main upgrade step, before shutting down the cluster we need to dump the db 2) We upgrade the packages 3) We briefly start mysql on a single node while making sure that /root/.my.cnf is briefly moved out of the way (because it contains a password) and import the data. After the import we shutdown this mysql instance 4) We let the cluster start up normally The above steps will take place in the following scenarios. Given a locally installed mariadb version X.Y.Z and release R, we will dump and restore the DB under the following conditions: A) MySqlMajorUpgrade template parameter is set to 'auto' and the upgraded package differs in X, Y *or* Z. We basically don't dump automatically if the release field changes. B) MySqlMajorUpgrade template parameter is set to 'yes' When MySqlMajorUpgrade is set to 'no', no dumping will be performed. Note that this will give a non functional upgrade if a major mariadb upgrade is taking place. Partial-Bug: #1587449 Co-Author: Damien Ciabrin <dciabrin@redhat.com> Co-Author: Mike Bayer <mbayer@redhat.com> Depends-On: I8cb4cb3193e6b823aad48ad7dbbbb227364d2a58 Depends-On: I38dcacfabc44539aab1f7da85168fe44a1b43a51 Change-Id: I374628547aed091129d0deaa29764bfc998d76ea
2016-06-29Increase cluster sync timeout for M->N major upgradesDamien Ciabrini1-1/+1
Since the Liberty release, the number of services managed by pacemaker on HA Overcloud has increased. This has an impact on major_upgrade_controller_pacemaker_1.sh, where cluster sync timeout value tuned for older releases is now becoming too low. Raise the cluster sync timeout value to a sensible limit to give pacemaker enough time to stop the cluster during major upgrade. Change-Id: I821d354ba30ce39134982ba12a82c429faa3ce62 Closes-Bug: #1597506
2016-06-24Disable stonith temporarily during upgradesMichele Baldessari1-0/+14
It is best if we disable stonith if a cluster has it configured and on, before we call "pcs cluster stop --all", because should a service fail to stop for whatever reason, pacemaker will fence the node where it happened. This is something that we unlikely want during an upgrade as it will make things worse. Once the cluster is stopped we can reenable stonith (if it was enabled to start with) in the CIB while the cluster is shut down. Closes-Bug: #1596065 Change-Id: I38dcacfabc44539aab1f7da85168fe44a1b43a51
2016-06-14Allow to manually disable post-puppet restartsJiri Stransky2-13/+30
Restarting services after Puppet is vital to ensure that config changes go applied. However, it can be sometimes desirable to prevent these restarts to avoid downtime, if the operator is sure that no config changes need applying. This can be a case e.g. when scaling compute nodes. Passing the puppet-pacemaker-no-restart.yaml environment file *in addition* to puppet-pacemaker.yaml should allow this. This is a stop gap solution before we have proper communication between Puppet and Pacemaker to allow selective restarts. Change-Id: I9c3c5c10ed6ecd5489a59d7e320c3c69af9e19f4
2016-05-20Merge "Add ExtraConfig example that always runs on update"Jenkins1-0/+39
2016-05-04Merge "Disable VIPs before stopping cluster during version upgrade"Jenkins2-0/+11
2016-05-04Merge "Fix distinguishing between stack-create and stack-update"Jenkins1-1/+1
2016-05-02Disable VIPs before stopping cluster during version upgradeIan Pilcher2-0/+11
If "pcs cluster stop --all" is executed on a controller that happens to have a VIP on the internal network, pcs may use the VIP as the source address for communication with another cluster node. When pacemaker is stopped this VIP goes away, and pcs never receives a response from the other node. This causes pcs to hang indefinitely; eventually the upgrade times out and fails. Disabling the VIPs before stopping the cluster avoids this situation. Change-Id: I6bc59120211af28456018640033ce3763c373bbb Closes-Bug: 1577570
2016-04-26Merge "Update .sh references from openstack-keystone to openstack-core"Jenkins4-115/+8
2016-04-20Merge "Increase galera sync timeout in yum_update.sh"Jenkins1-1/+1
2016-04-13Make sure openstack services are dependent on openstack-coreJiri Stransky1-0/+36
Previously ceilometer-notification, aodh-listener and sahara-engine didn't have constraints that would anchor them under openstack-core dummy resource. Such constraints are added now. (sahara-engine starting after sahara-api, aodh-listener after aodh-evaluator, and ceilometer-notification after openstack-core.) Openstack-core -> heat-api constraint has been removed because heat-api depends on ceilometer-notification, so there's a transitive dependency on openstack-core already. Change-Id: Ided7321ebbf2c3556726343b4bb466fd8759b43a Closes-Bug: #1569444
2016-04-11Fix distinguishing between stack-create and stack-updateJiri Stransky1-1/+1
Previously we tried to use UpdateIdentifier for two different things: tell whether to perform package update, and also to tell whether the top-level stack is being created or updated (which was incorrect and resulted in bug 1567384, and an attempt to work around that bug resulted in bug 1567385). We cannot use Heat's "action" conditionals in some cases, because they refer to the direct parent stack, which can yield undesirable results when introducing new nested stacks or temporarily no-opping something and then adding it back (in both these cases, "action" would be considered "CREATE", even though the top-level stack is in "UPDATE"). So tripleoclient passes a new parameter StackAction to tell whether the top-level stack is being created or updated, and we make use of that. (It seems there's no better way of getting this info from within the nested Heat stacks.) Change-Id: Ie14ddbff15e7ed21aaa3fcdacf36e0040f912382 Depends-On: I9dc3b4cd8a6a71df34d8babf0e4c6505041f5311 Closes-Bug: #1567384 Related-Bug: #1567385
2016-04-11Update .sh references from openstack-keystone to openstack-coreGiulio Fidente4-115/+8
The update and upgrade shell scripts were still referencing the old openstack-keystone service which got removed with Ie26908ac9bfc0b84b6b65ae3bda711236b03d9d4 Also removes kilo and liberty specific workarounds and config changes. Change-Id: Icc80904908ee3558930d4639a21812f14b2fd12e
2016-04-08Replace extraconfig/tasks/noop.yaml w/ Heat::NoneDan Prince1-26/+0
Removes the old noop nested stack template for extraconfig tasks and instead uses OS::Heat::None. This should avoid a few extra resource checks on create and update. Change-Id: I5a42fc78ece2553e86385236e214aa1e3c91cd85
2016-04-07Add removal of the /etc/resolv.conf.save file for +bug/1567004marios1-0/+3
The change at https://review.openstack.org/#/c/302352/ should stop the if up/down scripts from making changes to resolv.conf as discussed in that review and the related bug below. However during upgrades, as we are moving from a version of the ifcfg-vlanXX files that don't have the PEERDNS=no added by /#/c/302352 the if up script will restore the /etc/resolv.conf.save to /etc/resolv.conf and overwrite it. This removes the .save file during the upgrade init command which gets delivered to all nodes as the first stage of a major upgrade. Change-Id: I91dd139f43be4912c20d8661691bee2b662964d4 Related-Bug: 1567004
2016-04-04Filter for local nodes in check_resource functionRaoul Scarazzini1-1/+2
While having extra customizations inside a TripleO deployed Pacemaker environment, say you have instance HA with pacemaker_remoted or you need to configure an external arbitrator for something, then the status of the resources for remote nodes is "Stopped". This leads to failures while, for example, scaling up. This fixes the way status is checked, filtering just local nodes. Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Change-Id: I8dc25f5d7031c265858afd5a266fda5315ae37a0
2016-04-01Restart haproxy after configuring SSL certsBen Nemec2-7/+21
If a certificate expires, the user will need to update it. However, because we only restart services at the end of a stack-update the new certificate doesn't take effect until after puppet has run. This is a problem because puppet makes OpenStack calls, which will fail if the certificate is expired. In that case we never get to the service restart so the stack is wedged until the user manually restart haproxy. This patch addresses the problem by reloading haproxy before puppet runs. This is done in a pre-puppet script for pacemaker after pacemaker is maintenance mode because we need to make sure it happens after all of the certs have been installed on the controllers, but before puppet runs. For non-pacemaker, haproxy is simply reloaded. Change-Id: Id5ed05b3a20d06af8ae7a3d6f859b03399b0d77d
2016-03-29change the default satellite tools rpm repo.Mike Burns3-1/+6
Change-Id: I60ab36b04b8932e4dbee58e21998dc984178b41c Bugzilla: https://bugzilla.redhat.com/1275281
2016-03-24Set UpdateIdentifier for upgrade converge, to prevent services downMathieu Bultel1-6/+0
We'd like to let the post puppet pacemaker controller services restart to happen for the convergence step so set the UpdateIdentifier. However also set the PackageUpdate to noop so the yum_update.sh doesn't happen. Since a full haproxy restart is expected, we no longer need the systemctl reload added at Iae3bad745ecdf952a7a0314fe1375d07eb47c454 so remove that too. Some more context at https://bugzilla.redhat.com/show_bug.cgi?id=1321036 Co-Authored-By: marios <marios@redhat.com> Change-Id: I31c2d97d68c97b435f63863fae2c89f18f99681d
2016-03-24Merge "Fix satellite registration for http or https"Jenkins1-4/+5
2016-03-24Merge "Add systemctl reload haproxy to the pacemaker_resource_restart.sh"Jenkins1-0/+6
2016-03-24Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins2-2/+31
2016-03-23Add systemctl reload haproxy to the pacemaker_resource_restart.shmarios1-0/+6
As discussed in the related bug below, after upgrading your environment to latest liberty the haproxy config isn't picked up. This adds a systemctl reload haproxy in the pacemaker resource restart we run as part of the post-puppet-pacemaker. Related-Bug: 1561012 Change-Id: Iae3bad745ecdf952a7a0314fe1375d07eb47c454
2016-03-23Add ExtraConfig example that always runs on updateSteven Hardy1-0/+39
Some user feedback indicates we need better examples showing how we can run an extraconfig template, e.g on post-deploy so that it runs every update, regardless of if a change to the config has occurred. We can leverage DeployIdentifier for this, just like with the puppet deployments. This can be tested with an example like this: resource_registry: OS::TripleO::NodeExtraConfigPost: tripleo-heat-templates/extraconfig/post_deploy/example_run_on_update.yaml Change-Id: I45d8f8093ab45c03238ec56651c437128661cb95
2016-03-23Fix satellite registration for http or httpsJames Slagle1-4/+5
If the satellite registration url was specified with https, the curl command to detect the satellite version would not work as expected since -L was not passed and you get redirected to https when testing the ping api. To additionally handle the case where https is specified, also use curl directly with -k to download the configuration rpm instead of using rpm with a url. Fixes another bug with a missing $ in the reference to the $satellite_version variable. Change-Id: I984fdfc415eeeed4ef29cc8d0812e1b67545d6b1
2016-03-20Deploy Aodh services, replacing Ceilometer AlarmPradeep Kilambi2-2/+31
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config * Add migration logic to remove pcs resources Depends-On: I5333faa72e52d2aa2a622ac2d4b60825aadc52b5 Depends-On: Ib6c9c4c35da3fb55e0ca8e2d5a58ebaf4204d792 Co-Authored-By: Emilien Macchi <emilien@redhat.com> Change-Id: Ib47a22884afb032ebc1655e1a4a06bfe70249134
2016-03-11Merge "Upgrades: quiet yum upgrade on cinder nodes"Jenkins1-1/+1