summaryrefslogtreecommitdiffstats
path: root/extraconfig
AgeCommit message (Collapse)AuthorFilesLines
2017-04-20N->O Manual puppet commands have the right modulepath.Sofer Athlan-Guyot1-1/+4
In two places during upgrade we manually trigger puppet. There can be a problem when new puppet modules are added, and their corresponding symlinks in /etc/puppet/modules are not created during the installation as their are installed in /usr/share/openstack-puppet/modules. To prevent the issue tripleo set modulepath in the templates. We must use the same modulepath to make sure that we don't fail because of missing module in the manual puppet run. This particulary happens when you upgrade from M->N->O, as the base image in Mitaka doesn't have the proper symlinks and they are not created during the installation of the package. Closes-Bug: #1684587 Change-Id: I79df6ea33f1c58e13309176a6de41b7572541fd6
2017-04-18Merge "SSH known_hosts config"Jenkins2-0/+78
2017-04-14Merge "Allow for update after RHEL registration"Jenkins1-0/+37
2017-04-13SSH known_hosts configOliver Walsh2-0/+78
Fetch the host public keys from each node, combine them all and write to the system-wide ssh known hosts. The alternative of disabling host key verification is vulnerable to a MITM attack. Change-Id: Ib572b5910720b1991812256e68c975f7fbe2239c
2017-04-12Merge "yum_update.sh - Use the yum parameter: check-update"Jenkins1-3/+11
2017-04-11Merge "Decouple Swift ringbuilding logic"Jenkins2-73/+0
2017-04-10metadatahook: Use coalesce to handle null valuesJuan Antonio Osorio Robles1-3/+3
This uses the coalesce function to take null values into account, else these resources will fail validation. Change-Id: Iaf4218dd731826f80b76ff8f7a902adc8c865be5 Closes-Bug: #1681332
2017-04-10Decouple Swift ringbuilding logicChristian Schwede2-73/+0
This reverts commit b323f8a16035549d84cdec4718380bde3d23d6c3 and uses the new logic in puppet-tripleo (see Ifd6fa5b398d98e8998630ea0c9a2ce9867ceba2b ), basically doing the same. Closes-Bug: 1665641 Change-Id: Ib5cb0578be2993af0a0b8675005d838640bdb139
2017-04-07Allow for update after RHEL registrationAlex Schultz1-0/+37
Adds the ability to perform a yum update after performing the RHEL registration. Change-Id: Id84d156cd28413309981d5943242292a3a6fa807 Partial-Bug: #1640894
2017-04-06Merge "Don't disable satellite repo after registration"Jenkins1-1/+0
2017-04-05yum_update.sh - Use the yum parameter: check-updateMatthew Flusche1-3/+11
The current check tends to produce a false positive causing unnecessary service restarts. yum check-update will exit with return code 100 if updated packages are available. Change-Id: I8bd89f2b24bafc6c991382b9eb484cfa9a2f8968
2017-04-01Merge "Add special case upgrade from openvswitch 2.5.0-14"Jenkins3-4/+11
2017-03-31Add special case upgrade from openvswitch 2.5.0-14marios3-4/+11
In [1] we removed the previously used special case upgrade code. However we have since discovered that for openvswitch 2.5.0-14 the special case is still required with an extra flag to prevent the restart. This adds the upgrade code back into the minor update and 'manual upgrade' scripts for compute/swift. The review at If998704b3c4199bbae8a1d068c31a71763f5c8a2 is adding this logic for the ansible upgrade steps. Related-Bug: 1669714 [1] https://review.openstack.org/#/q/59e5f9597eb37f69045e470eb457b878728477d7 Change-Id: I3e5899e2d831b89745b2f37e61ff69dbf83ff595
2017-03-28Run cluster check on nodes configured in wsrep_cluster_address.Yurii Prokulevych1-9/+13
Attempt to check galera's cluster status fails when galera service is not running on the same node. Change-Id: I27fb0841d85cd0dc86e92ac2e21eedf5f8f863ab
2017-03-20Merge "Don't try to run os-net-config from yum_update.sh"Jenkins1-11/+0
2017-03-20Merge "Fixes multiple issues with retry function in rhel-registration."Jenkins1-17/+31
2017-03-15Don't disable satellite repo after registrationBen Nemec1-1/+0
Previously the rhel registration script disabled the satellite repo after installing packages from it. This means those packages will never be updated, which is not desirable from a long-term maintenance perspective. I believe this behavior is a holdover from the dib registration script, where we don't want to leave repos enabled because the image may be deployed many times and each instance needs to be re-registered. In t-h-t we don't have that problem because the script only runs at deploy time so it's okay and desirable to leave the repos enabled. Change-Id: I5d760467b458d90d74507a55effc49b71d22eaa3 Closes-Bug: 1673116
2017-03-15Cleanup no longer used upgrade filesmarios13-1014/+0
Removes some of the no longer used scripts and templates used by the upgrades workflow in previous versions. Change-Id: I7831d20eae6ab9668a919b451301fe669e2b1346
2017-03-14Fixes multiple issues with retry function in rhel-registration.Vincent S. Cojot1-17/+31
There were multiple issues in retry() in rhel-registration: - There was no need for it to be recursive (local variables got overwritten) - There was no delay between multiple attempts, leading to faster but more frequent failures. - The max number of attempts was set too low for some environements. With this patch, rhel-registration now works more reliably with slow-links for portal registration and does not attempt to DDos the portal or your satellite server. Change-Id: I594d3c94867b45a7a58766dbcc66edead78d6a4e
2017-03-13Don't try to run os-net-config from yum_update.shLukas Bezdicka1-11/+0
The UpdateDeployment already depends on NetworkDeployment. We should not run os-net-config unconditionally before update. Closes-Bug: #1666227 Change-Id: I48cbf5de00d47c6fdad71ff24c00e9db05cec5d5
2017-03-08Merge "Remove the openvswitch special case upgrade code"Jenkins2-9/+9
2017-03-06Merge "Fix a typo"Jenkins1-2/+2
2017-03-03Remove the openvswitch special case upgrade codemarios2-9/+9
Removed from the tripleo_upgrade_node.sh (major upgrade) & yum_update.sh (minor update). The workaround is no longer needed and in fact has the opposite effect killing connectitivity to the node. The 'normal' yum update on nodes delivers the latest openvswitch 2.6.1 with no drama. Also adds a 'complete' message, some extra debug echo for logs and removes the python-zaqarclient install no longer needed Closes-Bug: 1669714 Change-Id: Icd1517bcade36781fa0da21d045ffd9ec68efc38
2017-03-01Merge "Disable exit on error for pacemaker commands for update flow"Jenkins1-1/+4
2017-03-01Merge "Use --disable= in subscription-manager to avoid shell expansion."Jenkins1-1/+1
2017-02-28Use --disable= in subscription-manager to avoid shell expansion.Vincent S. Cojot1-1/+1
In extraconfig/pre_deploy/rhel-registration/scripts/rhel-registration, there's a line that says: retry subscription-manager repos --disable '*' I believe this is broken and will result in shell expansion being made. The proper line should be: retry subscription-manager repos --disable='*' This regression came from commit 2b06ed8adce2bcc18480b71c0f20a0ec2d21de19. (Also see https://review.openstack.org/#/c/381233 ) This patch fixes the regression while preserving functionality of the above change. Closes-Bug: 1667316 Change-Id: I54f0db3f1f596f6356f7445cdc61737f20f14318 Signed-off-by: Vincent S. Cojot <vincent@cojot.name>
2017-03-01Disable exit on error for pacemaker commands for update flowSaravanan KR1-1/+4
Package update fails on compute node, when yum_update checks for pacemaker status via systemctl command. Because exit on error (-e) option has been enabled recently, this issue is happening. Fixing by, executing the command only on nodes where pacemaker is enabled. Closes-Bug: #1668266 Change-Id: I2aae4e2fdfec526c835f8967b54e1db3757bca17
2017-02-28Merge "Adds http proxy support for registering RHEL overcloud nodes"Jenkins3-0/+100
2017-02-24Merge "Adding definition of backup_flags"Jenkins1-0/+1
2017-02-24Adding definition of backup_flagsLuca Lorenzetto1-0/+1
During the upgrade from M to N i encountered an error in a step requiring the upgrade of mysql version. The variable backup_flags is undefined at that point. Change-Id: Ic6681c40934b27a03d00a75007d7f12d6d540de3 Closes-Bug: #1667731
2017-02-22Adds http proxy support for registering RHEL overcloud nodesVincent S. Cojot3-0/+100
It is quite common in large entreprises that direct HTTP/HTTPS to the outside world is denied from nodes/systems but reaching out through a proxy is allowed. This change adds support for an HTTP proxy when RHEL overcloud nodes reach out to either the RHSM portal or to a satellite server. This allows the overcloud nodes to download updates even in locked-down environments. The following variables are settable through templates: rhel_reg_http_proxy_host: rhel_reg_http_proxy_port: rhel_reg_http_proxy_username: rhel_reg_http_proxy_password: Note the following restrictions: - If setting rhel_reg_http_proxy_host, then rhel_reg_http_proxy_port cannot be empty. - If setting rhel_reg_http_proxy_port, then rhel_reg_http_proxy_host cannot be empty. - If setting rhel_reg_http_proxy_username, then rhel_reg_http_proxy_password cannot be empty. - If setting rhel_reg_http_proxy_password, then rhel_reg_http_proxy_username cannot be empty. - If setting either rhel_reg_http_proxy_username or rhel_reg_http_proxy_password, then rhel_reg_http_proxy_host AND rhel_reg_http_proxy_port cannot be empty Change-Id: I003ad5449bd99c01376781ec0ce9074eca3e2704
2017-02-21Add checks in ansible upgrade tasks for CephMon and CephOSDGiulio Fidente1-4/+0
Adds two checks, one for the CephMon and one for the CephOSD upgrade tasks borrowed from ceph-ansible. Change-Id: I0a0e60d277240130c6bd76a74ccc13354b87a30a Co-Authored-By: Sebastien Han <seb@redhat.com>
2017-02-17Merge "Add explicit swift check to tripleo_upgrade_node.sh"Jenkins1-4/+11
2017-02-17Merge "Apply puppet in non-controller script in step."Jenkins2-3/+35
2017-02-17Merge "Automatically backup and restore Swift rings from the undercloud"Jenkins2-0/+73
2017-02-15Add explicit swift check to tripleo_upgrade_node.shmarios1-4/+11
And change the conditional to use hiera instead. Change-Id: Icf91dd91c0ab04e7919172fcfd130183bfd427b4
2017-02-15Apply puppet in non-controller script in step.Sofer Athlan-Guyot2-3/+35
We want to apply a puppet manifest for the non-controller role, but we need to apply it in stages. By loading the proper hieradata we get the needed step configuration. Change-Id: I07bfeee7b7d9a9b8c2c20e5d5c9ed735d0bfc842 Closes-Bug: #1664304
2017-02-12Merge "Dump and run puppet for role which are disable_upgrade_deployment true"Jenkins1-0/+3
2017-02-10Dump and run puppet for role which are disable_upgrade_deployment trueMathieu Bultel1-0/+3
We wants to run puppet on each role which has the flag disable_upgrade_deployment to true. It will run after the upgrade of the role and before running the whole converge step. Change-Id: Ia85be688d070dfb5b8337e8ef3c4bc439fb6052e
2017-02-10Remove legacy major upgrade scripts for Ceph and BlockStorageGiulio Fidente4-246/+1
We do not need the upgrade scripts used to migrate Ceph from hammer to jewel. This submission removes that and the legacy upgrade scripts used for the BlockStorage role. Change-Id: I2674216dd9b5b849de6a2624ee1115420a254182
2017-02-10Delivers upgrade scripts where upgrade steps are disabledmarios4-173/+51
This delivers a /root/tripleo_upgrade_node.sh to those nodes that have the disable_upgrade_deployment flag set to true. They will later be upgraded manually by the operator who will invoke the script delivered here using upgrade-non-controller.sh We can also deliver any service specific upgrade configuration, such as configuring nova-compute to use the placement API as this is required in order for placement to be configured and installed during the subsequent upgrade steps for controller services. This removes the compute and swift specific upgrade scripts as they are now merged into the common tripleo_upgrade_node.sh - removing any hard coded reference to a particular role name (compute/objectstorage) and only relying on the disable_upgrade_deployment is roles_data.yaml Change-Id: I4531a4038b78087ef4a1a62c35f1328822427817 Co-Authored-By: Mathieu Bultel <mbultel@redhat.com>
2017-02-06Automatically backup and restore Swift rings from the undercloudChristian Schwede2-0/+73
Swift rings created or updated on the overcloud nodes will now be stored on the undercloud at the end of the deployment. An additional consistency check is executed before storing them, ensuring all rings within the cluster are identical. These rings will be retrieved (before Puppet runs) by every node when an UPDATE is executed, and by doing this will be in a consistent state across the cluster. This makes it possible to add, remove or replace nodes in an existing cluster without manual operator interaction. Closes-Bug: 1609421 Depends-On: Ic3da38cffdd993c768bdb137c17d625dff1aa372 Change-Id: I758179182265da5160c06bb95f4c6258dc0edcd6
2017-02-02Merge "Don't run yum_update.sh inside docker"Jenkins1-0/+5
2017-01-25Merge "Add metadata settings for needed kerberos principals"Jenkins1-0/+84
2017-01-25Merge "Ignore systemctl return code in yum_update.sh"Jenkins1-1/+1
2017-01-25Add metadata settings for needed kerberos principalsJuan Antonio Osorio Robles1-0/+84
These are only used for TLS-everywhere, and fills up the kerberos principals that will need to be created for the certs used by the overcloud. With this, the metadata hook will format these principals correctly and will further pass them on to the nova metadata service. Where they can be used if there's a plugin enabled. bp tls-via-certmonger bp novajoin Change-Id: I873094bb69200052febda629fda698a7a782c031
2017-01-19Merge "Remove redundant CLI arguments for neutron-db-manage"Jenkins1-1/+1
2017-01-19Ignore systemctl return code in yum_update.shLukas Bezdicka1-1/+1
We only need to know if pacemaker service is in active state. Change-Id: Id5e16f2bbbe51b8a0c250eb5d35e89e61a7b3383 Resolves: rhbz#1414779 Closes-Bug: #1656980
2017-01-18Merge "Bump missing template names to ocata"Jenkins2-2/+2
2017-01-18Merge "Remove Glance Registry service"Jenkins2-2/+1