summaryrefslogtreecommitdiffstats
path: root/extraconfig/tasks
AgeCommit message (Collapse)AuthorFilesLines
2017-06-19Merge "Blacklist support for ExtraConfig"Jenkins1-0/+8
2017-06-16Blacklist support for ExtraConfigJames Slagle1-0/+8
Commit I46941e54a476c7cc8645cd1aff391c9c6c5434de added support for blacklisting servers from triggered Heat deployments. This commit adds that functionality to the remaining Deployments in tripleo-heat-templates for the ExtraConfig interfaces. Since we can not (should not) change the interface to ExtraConfig, Heat conditions are used on the actual <role>ExtraConfigPre and NodeExtraConfig resources instead of using the actions approach on Deployments. Change-Id: I38fdb50d1d966a6c3651980c52298317fa3bece4
2017-06-15Ignore case for bootstrap node checksAlex Schultz2-2/+2
The bootstrap_nodeid can have capital letters while the hostname may not. In puppet we use downcase for this comparison, so let's follow a similar pattern for scripts from THT. Change-Id: I8a0bec4a6f3ed0b4f2289cbe7023344fb284edf7 Closes-Bug: #16998201
2017-06-12Moving *postconfig where it was *postpuppetCarlos Camacho1-4/+4
We need to ensure that the pacemaker cluster restarts in the end of the deployment. Due to the resources renaming we added the postconfig resource not in the end of the deployment as it was *postpuppet. Closes-bug: 1695904 Change-Id: Ic6978fcff591635223b354831cd6cbe0802316cf
2017-05-19Update the template_version alias for all the templates to pike.Carlos Camacho7-7/+7
Master is now the development branch for pike changing the release alias name. Change-Id: I938e4a983e361aefcaa0bd9a4226c296c5823127
2017-05-05Merge "Fix up pacemaker_status test in yum_update.sh"Jenkins1-2/+2
2017-05-04Merge "[N->O] Add openstack-nova-migration to compute nodes."Jenkins1-0/+1
2017-05-04Fix up pacemaker_status test in yum_update.shMichele Baldessari1-2/+2
In change I2aae4e2fdfec526c835f8967b54e1db3757bca17 we did the following: -pacemaker_status=$(systemctl is-active pacemaker || :) +pacemaker_status="" +if hiera -c /etc/puppet/hiera.yaml service_names | grep -q pacemaker; then + pacemaker_status=$(systemctl is-active pacemaker) +fi we did that so due to LP#1668266: we did not want systemctl is-active to fail on non pacemaker nodes. The problem with the above hiera check is that it will match on pacemaker_remote nodes as well. We cannot piggyback the pacemaker_enabled hiera key because that is true on all nodes. So let's make the test check only for pacemaker service without matching pacemaker remote. Tested with: 1) Test on a controller node with pacemaker service enabled [root@overcloud-controller-0 ~]# hiera -c /etc/puppet/hiera.yaml -a service_names |grep '\bpacemaker\b' "pacemaker", [root@overcloud-controller-0 ~]# echo $? 0 2) Test on a compute node without pacemaker: [root@overcloud-novacompute-0 puppet]# hiera -c /etc/puppet/hiera.yaml service_names |grep '\bpacemaker\b' [root@overcloud-novacompute-0 puppet]# echo $? 1 3) Test on a node with pacemaker_remote in the service_names key: [root@overcloud-novacompute-0 puppet]# hiera -c /etc/puppet/hiera.yaml service_names |grep '\bpacemaker\b' [root@overcloud-novacompute-0 puppet]# echo $? 1 [root@overcloud-novacompute-0 puppet]# hiera -c /etc/puppet/hiera.yaml service_names |grep '\bpacemaker_remote\b' "pacemaker_remote"] [root@overcloud-novacompute-0 puppet]# echo $? 0 Change-Id: I54c5756ba6dea791aef89a79bc0b538ba02ae48a Closes-Bug: #1688214
2017-05-04Merge "Initial VIP ipv6 minor update code"Jenkins2-5/+74
2017-05-03[N->O] Add openstack-nova-migration to compute nodes.Sofer Athlan-Guyot1-0/+1
This add openstack-nova-migration on the compute during the upgrade. Closes-Bug: #1687081 Depends-on: Iab022bdfb655e3c52fecebf416e75c9e981072ab Depends-on: I02dc8934521340f42ac44a7d16889f6d79620c33 Change-Id: I3db2a3188e538eeaef61769d38f0166545444cfe
2017-05-02Merge "Fix for the resource ControllerPostPuppetMaintenanceModeDeployment"Jenkins3-10/+15
2017-05-02Initial VIP ipv6 minor update codeMichele Baldessari2-5/+74
To test this change we deployed a stock master with ipv6 which created a bunch of ipv6 with /64 netmask: [root@overcloud-controller-0 ~]# pcs resource show ip-fd00.fd00.fd00.2000..18 Resource: ip-fd00.fd00.fd00.2000..18 (class=ocf provider=heartbeat type=IPaddr2) Attributes: ip=fd00:fd00:fd00:2000::18 cidr_netmask=64 Operations: start interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-start-interval-0s) stop interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-stop-interval-0s) monitor interval=10s timeout=20s (ip-fd00.fd00.fd00.2000..18-monitor-interval-10s) Then we update the THT folder with this patch and upload the new scripts on the undercloud via: openstack overcloud deploy --update-plan-only .... Then we kick off the minor update workflow: openstack overcloud update stack -i overcloud Once the controller-0 node (bootstrap node for pacemaker) is completed we have the correct VIP configuration: [root@overcloud-controller-0 heat-config-script]# pcs resource show ip-fd00.fd00.fd00.2000..18 Resource: ip-fd00.fd00.fd00.2000..18 (class=ocf provider=heartbeat type=IPaddr2) Attributes: ip=fd00:fd00:fd00:2000::18 cidr_netmask=128 nic=vlan20 lvs_ipv6_addrlabel=true lvs_ipv6_addrlabel_value=99 Operations: start interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-start-interval-0s) stop interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-stop-interval-0s) monitor interval=10s timeout=20s (ip-fd00.fd00.fd00.2000..18-monitor-interval-10s) Also verified that running the script a second time does not alter the (already fixed) VIPs. Co-Authored-By: Damien Ciabrini <dciabrin@redhat.com> Change-Id: I765cd5c9b57134dff61f67ce726bf88af90f8090
2017-05-02Fix for the resource ControllerPostPuppetMaintenanceModeDeploymentCarlos Camacho3-10/+15
Closes-Bug:1686619 Change-Id: I7c32ca39a456de9833d30c31d41fcb727d2b0a34
2017-04-27Remove deprecated minor update pcs codeMichele Baldessari1-18/+0
We fixed pcs resources start/stop timeouts via I587136d8d045d213875c657ea5a405074f80c8ad in Nov 2015.for mitaka. And there we stated: This can be removed once updates from deployments made prior to I6fc18f1ad876c5a25723710a3b20d8ec9519dcba are no longer supported. We can now safely remove these updates as they are useless and cost time anyway. Change-Id: Ibad2b3eed0d08560d52d5ebe700746b61e5b8f51
2017-04-24Merge pre|post puppet resources into pre|post config.Carlos Camacho1-2/+2
The [Pre|Post]Puppet resources were renamed in https://review.openstack.org/#/c/365763. This was intended for having a pre/post deployment steps using an agnostic name instead of being attached to a technology. The renaming was unintentionally reverted in https://review.openstack.org/#/c/393644/ and https://review.openstack.org/#/c/434451. This submission merge both resources into one, and remove the old pre|post hooks. Closes-bug: #1669756 Change-Id: Ic9d97f172efd2db74255363679b60f1d2dc4e064
2017-04-20N->O Manual puppet commands have the right modulepath.Sofer Athlan-Guyot1-1/+4
In two places during upgrade we manually trigger puppet. There can be a problem when new puppet modules are added, and their corresponding symlinks in /etc/puppet/modules are not created during the installation as their are installed in /usr/share/openstack-puppet/modules. To prevent the issue tripleo set modulepath in the templates. We must use the same modulepath to make sure that we don't fail because of missing module in the manual puppet run. This particulary happens when you upgrade from M->N->O, as the base image in Mitaka doesn't have the proper symlinks and they are not created during the installation of the package. Closes-Bug: #1684587 Change-Id: I79df6ea33f1c58e13309176a6de41b7572541fd6
2017-04-18Merge "SSH known_hosts config"Jenkins2-0/+78
2017-04-13SSH known_hosts configOliver Walsh2-0/+78
Fetch the host public keys from each node, combine them all and write to the system-wide ssh known hosts. The alternative of disabling host key verification is vulnerable to a MITM attack. Change-Id: Ib572b5910720b1991812256e68c975f7fbe2239c
2017-04-12Merge "yum_update.sh - Use the yum parameter: check-update"Jenkins1-3/+11
2017-04-10Decouple Swift ringbuilding logicChristian Schwede2-73/+0
This reverts commit b323f8a16035549d84cdec4718380bde3d23d6c3 and uses the new logic in puppet-tripleo (see Ifd6fa5b398d98e8998630ea0c9a2ce9867ceba2b ), basically doing the same. Closes-Bug: 1665641 Change-Id: Ib5cb0578be2993af0a0b8675005d838640bdb139
2017-04-05yum_update.sh - Use the yum parameter: check-updateMatthew Flusche1-3/+11
The current check tends to produce a false positive causing unnecessary service restarts. yum check-update will exit with return code 100 if updated packages are available. Change-Id: I8bd89f2b24bafc6c991382b9eb484cfa9a2f8968
2017-04-01Merge "Add special case upgrade from openvswitch 2.5.0-14"Jenkins3-4/+11
2017-03-31Add special case upgrade from openvswitch 2.5.0-14marios3-4/+11
In [1] we removed the previously used special case upgrade code. However we have since discovered that for openvswitch 2.5.0-14 the special case is still required with an extra flag to prevent the restart. This adds the upgrade code back into the minor update and 'manual upgrade' scripts for compute/swift. The review at If998704b3c4199bbae8a1d068c31a71763f5c8a2 is adding this logic for the ansible upgrade steps. Related-Bug: 1669714 [1] https://review.openstack.org/#/q/59e5f9597eb37f69045e470eb457b878728477d7 Change-Id: I3e5899e2d831b89745b2f37e61ff69dbf83ff595
2017-03-28Run cluster check on nodes configured in wsrep_cluster_address.Yurii Prokulevych1-9/+13
Attempt to check galera's cluster status fails when galera service is not running on the same node. Change-Id: I27fb0841d85cd0dc86e92ac2e21eedf5f8f863ab
2017-03-20Merge "Don't try to run os-net-config from yum_update.sh"Jenkins1-11/+0
2017-03-15Cleanup no longer used upgrade filesmarios13-1014/+0
Removes some of the no longer used scripts and templates used by the upgrades workflow in previous versions. Change-Id: I7831d20eae6ab9668a919b451301fe669e2b1346
2017-03-13Don't try to run os-net-config from yum_update.shLukas Bezdicka1-11/+0
The UpdateDeployment already depends on NetworkDeployment. We should not run os-net-config unconditionally before update. Closes-Bug: #1666227 Change-Id: I48cbf5de00d47c6fdad71ff24c00e9db05cec5d5
2017-03-08Merge "Remove the openvswitch special case upgrade code"Jenkins2-9/+9
2017-03-06Merge "Fix a typo"Jenkins1-2/+2
2017-03-03Remove the openvswitch special case upgrade codemarios2-9/+9
Removed from the tripleo_upgrade_node.sh (major upgrade) & yum_update.sh (minor update). The workaround is no longer needed and in fact has the opposite effect killing connectitivity to the node. The 'normal' yum update on nodes delivers the latest openvswitch 2.6.1 with no drama. Also adds a 'complete' message, some extra debug echo for logs and removes the python-zaqarclient install no longer needed Closes-Bug: 1669714 Change-Id: Icd1517bcade36781fa0da21d045ffd9ec68efc38
2017-03-01Disable exit on error for pacemaker commands for update flowSaravanan KR1-1/+4
Package update fails on compute node, when yum_update checks for pacemaker status via systemctl command. Because exit on error (-e) option has been enabled recently, this issue is happening. Fixing by, executing the command only on nodes where pacemaker is enabled. Closes-Bug: #1668266 Change-Id: I2aae4e2fdfec526c835f8967b54e1db3757bca17
2017-02-24Merge "Adding definition of backup_flags"Jenkins1-0/+1
2017-02-24Adding definition of backup_flagsLuca Lorenzetto1-0/+1
During the upgrade from M to N i encountered an error in a step requiring the upgrade of mysql version. The variable backup_flags is undefined at that point. Change-Id: Ic6681c40934b27a03d00a75007d7f12d6d540de3 Closes-Bug: #1667731
2017-02-21Add checks in ansible upgrade tasks for CephMon and CephOSDGiulio Fidente1-4/+0
Adds two checks, one for the CephMon and one for the CephOSD upgrade tasks borrowed from ceph-ansible. Change-Id: I0a0e60d277240130c6bd76a74ccc13354b87a30a Co-Authored-By: Sebastien Han <seb@redhat.com>
2017-02-17Merge "Add explicit swift check to tripleo_upgrade_node.sh"Jenkins1-4/+11
2017-02-17Merge "Apply puppet in non-controller script in step."Jenkins2-3/+35
2017-02-17Merge "Automatically backup and restore Swift rings from the undercloud"Jenkins2-0/+73
2017-02-15Add explicit swift check to tripleo_upgrade_node.shmarios1-4/+11
And change the conditional to use hiera instead. Change-Id: Icf91dd91c0ab04e7919172fcfd130183bfd427b4
2017-02-15Apply puppet in non-controller script in step.Sofer Athlan-Guyot2-3/+35
We want to apply a puppet manifest for the non-controller role, but we need to apply it in stages. By loading the proper hieradata we get the needed step configuration. Change-Id: I07bfeee7b7d9a9b8c2c20e5d5c9ed735d0bfc842 Closes-Bug: #1664304
2017-02-12Merge "Dump and run puppet for role which are disable_upgrade_deployment true"Jenkins1-0/+3
2017-02-10Dump and run puppet for role which are disable_upgrade_deployment trueMathieu Bultel1-0/+3
We wants to run puppet on each role which has the flag disable_upgrade_deployment to true. It will run after the upgrade of the role and before running the whole converge step. Change-Id: Ia85be688d070dfb5b8337e8ef3c4bc439fb6052e
2017-02-10Remove legacy major upgrade scripts for Ceph and BlockStorageGiulio Fidente4-246/+1
We do not need the upgrade scripts used to migrate Ceph from hammer to jewel. This submission removes that and the legacy upgrade scripts used for the BlockStorage role. Change-Id: I2674216dd9b5b849de6a2624ee1115420a254182
2017-02-10Delivers upgrade scripts where upgrade steps are disabledmarios4-173/+51
This delivers a /root/tripleo_upgrade_node.sh to those nodes that have the disable_upgrade_deployment flag set to true. They will later be upgraded manually by the operator who will invoke the script delivered here using upgrade-non-controller.sh We can also deliver any service specific upgrade configuration, such as configuring nova-compute to use the placement API as this is required in order for placement to be configured and installed during the subsequent upgrade steps for controller services. This removes the compute and swift specific upgrade scripts as they are now merged into the common tripleo_upgrade_node.sh - removing any hard coded reference to a particular role name (compute/objectstorage) and only relying on the disable_upgrade_deployment is roles_data.yaml Change-Id: I4531a4038b78087ef4a1a62c35f1328822427817 Co-Authored-By: Mathieu Bultel <mbultel@redhat.com>
2017-02-06Automatically backup and restore Swift rings from the undercloudChristian Schwede2-0/+73
Swift rings created or updated on the overcloud nodes will now be stored on the undercloud at the end of the deployment. An additional consistency check is executed before storing them, ensuring all rings within the cluster are identical. These rings will be retrieved (before Puppet runs) by every node when an UPDATE is executed, and by doing this will be in a consistent state across the cluster. This makes it possible to add, remove or replace nodes in an existing cluster without manual operator interaction. Closes-Bug: 1609421 Depends-On: Ic3da38cffdd993c768bdb137c17d625dff1aa372 Change-Id: I758179182265da5160c06bb95f4c6258dc0edcd6
2017-02-02Merge "Don't run yum_update.sh inside docker"Jenkins1-0/+5
2017-01-25Merge "Ignore systemctl return code in yum_update.sh"Jenkins1-1/+1
2017-01-19Merge "Remove redundant CLI arguments for neutron-db-manage"Jenkins1-1/+1
2017-01-19Ignore systemctl return code in yum_update.shLukas Bezdicka1-1/+1
We only need to know if pacemaker service is in active state. Change-Id: Id5e16f2bbbe51b8a0c250eb5d35e89e61a7b3383 Resolves: rhbz#1414779 Closes-Bug: #1656980
2017-01-16Remove Glance Registry serviceEmilien Macchi2-2/+1
Glance registry is not required for the v2 of the API and there are plans to deprecate it in the glance community. Let's remove v1 support since it has been deprecated for a while in Glance. Depends-On: I77db1e1789fba0fb8ac014d6d1f8f5a8ae98ae84 Co-Authored: Flavio Percoco <flaper87@gmail.com> Change-Id: I0cd722e8c5a43fd19336e23a7fada71c257a8e2d
2016-12-23Bump template version for all templates to "ocata"Steven Hardy9-9/+9
Heat now supports release name aliases, so we can replace the inconsistent mix of date related versions with one consistent version that aligns with the supported version of heat for this t-h-t branch. This should also help new users who sometimes copy/paste old templates and discover intrinsic functions in the t-h-t docs don't work because their template version is too old. Change-Id: Ib415e7290fea27447460baa280291492df197e54