aboutsummaryrefslogtreecommitdiffstats
path: root/environments
AgeCommit message (Collapse)AuthorFilesLines
2016-03-11Merge "Parameterize the heat-docker-agents image"Jenkins1-0/+1
2016-03-10Merge "Enable predictable IPs on non-controllers"Jenkins1-0/+75
2016-03-10Merge "Support the deployment of Ceph over IPv6"Jenkins1-0/+2
2016-03-10Merge "Upgrades: initialization command/snippet"Jenkins1-1/+1
2016-03-10Support the deployment of Ceph over IPv6Giulio Fidente1-0/+2
To deploy Ceph on IPv6, we need to enable ms_bind_ipv6 in addition to passing the list of MON IPs in brackets. Change-Id: I3644b8fc06458e68574afa5573f07442f0a09190
2016-03-09Enable predictable IPs on non-controllersBen Nemec1-0/+75
For the external loadbalancer work, we added the ability to specify fixed ips for controller nodes on all network isolation networks. In order to allow users full control over the placement and ip addresses of deployed nodes, we need to be able to do the same thing for the other node types. Change-Id: I3ea91768b2ea3a40287f2f3cdb823c23533cf290
2016-03-09Remove unused Neutron Agents containerRyan Hallisey2-4/+3
The Neutron Agents is currently not used. Refactor the heat templates to accommodate for this change. Change-Id: Ice3c5ce723fa16cfb66c2b0afbe51d7b282c3210
2016-03-09Merge "Add Rabbit IPv6 only support"Jenkins1-0/+2
2016-03-09Upgrades: initialization command/snippetJiri Stransky1-1/+1
This allows to run a command or a script snippet on all overcloud nodes at the beginning of the upgrade. The intended use is to switch to a new set of repositories on the overcloud. This is done differently in different contexts (e.g. upstream vs. downstream), but generally it should be simple enough to not warrant creation of switchable "UpgradeInit" resource in the resource registry, and a string command/snippet parameter should suffice. Change-Id: I72271170d3f53a5179b3212ec9bae9a6204e29e6
2016-03-09Make External Load Balancer templates work with IPv6Dan Sneddon1-0/+38
This change modifies the network isolation templates that allow for fixed IP addresses on the controllers' IPs and VIPs, and makes them compatible with IPv6 addresses. The latest version of the patchset creates an from_service_v6.yaml in order to properly handle service VIPs on IPv6 networks. Note that since OVS is not currently compatible with IPv6 tunnel endpoints, this patch does not yet enable IPv6 for the Tenant network by default. Change-Id: If881b000c6000ec13b54c0ee39f1c8940f079ae3 Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
2016-03-09Merge "Update enable-tls.yaml with new endpoints"Jenkins1-0/+6
2016-03-09Add Rabbit IPv6 only supportMartin Mágr1-0/+2
Adds Rabbit environment variable required for IPv6 only support Change-Id: Iec209ca83a5b0708ac828c4afaf9d2222e597f24
2016-03-08Update enable-tls.yaml with new endpointsBen Nemec1-0/+6
A couple of new endpoints have been added, and if they're not in the configured value for EndpointMap it will cause problems. Sahara is not added as ssl-enabled because I don't believe it has been added to the loadbalancer yet. Note that there is work underway to CI overcloud SSL, which should catch problems like this in the future. Change-Id: Ia8a106fd94da7be8675ea84f5fbb9ac959771d10
2016-03-07Merge "Allow to enable IPv6 on Corosync"Jenkins1-0/+2
2016-03-07Merge "Revert "Deploy Aodh services, replacing Ceilometer Alarm""Jenkins1-3/+0
2016-03-07Merge "Add IPv6 versions of the Controller NIC configs"Jenkins6-12/+52
2016-03-07Merge "Introduce a UpgradeScriptDeliveryWorfklow as part of tripleo upgrades"Jenkins1-0/+11
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle1-3/+0
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-05Allow to enable IPv6 on CorosyncEmilien Macchi1-0/+2
To enable IPv6 in Corosync, you'll need to set the --ipv6 parameter when building the cluster. To do so, we need to specify this parameter in puppet configuration when running ::pacemaker::corosync class. So we have now a new parameter: CorosyncIPv6 which is a boolean, False by default. If set to True, it will pass right options to enable IPv6 when building the Pacemaker cluster. Change-Id: I485f1399964ddd7a201ed19ec6580b8a136b3acd
2016-03-05Add IPv6 versions of the Controller NIC configsDan Sneddon6-12/+52
This change adds Controller NIC configs for the sample NIC config templates that are compatible with IPv6 on the External network. These controller-v6.yaml templates include a default route for IPv6 on the External network, and a default route for IPv4 on the Control Plane. The Heat parameters ExternalNetworkDefaultRoute and ControlPlaneDefaultRoute are used to set these values. Change-Id: Ifed8cb359eae1d9d623d3eb2fe40ea8a0d1d889a
2016-03-04Parameterize the heat-docker-agents imageRyan Hallisey1-0/+1
Heat docker agents needs to be parameterized so that we can change the tag from the environment file. Change-Id: I352fd0fdf982056de23285e366efe55ca3aaff1b Co-authored-by: Jeff Peeler <jpeeler@redhat.com>
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon1-0/+49
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-04Allow for usage of pre-allocated IPs for the management networkSteven Hardy1-0/+3
Id3d4f12235501ae77200430a2dc022f378dce336 added support for pre-allocated IPs on the other overlay networks, but because the patch adding the managment network (I0813a13f60a4f797be04b34258a2cffa9ea7e84f) was under review around the same time, we missed adding the from_pool capability to the ManagementNetwork. Change-Id: If99f37634d5da7e7fb7cfc31232e926bd5ff074a
2016-03-03Deploy Aodh services, replacing Ceilometer AlarmEmilien Macchi1-0/+3
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config Depends-On: I9e34485285829884d9c954b804e3bdd5d6e31635 Depends-On: I891985da9248a88c6ce2df1dd186881f582605ee Depends-On: Ied8ba5985f43a5c5b3be5b35a091aef6ed86572f Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: I58d419173e80d2462accf7324c987c71420fd5f6
2016-03-03Introduce a UpgradeScriptDeliveryWorfklow as part of tripleo upgradesmarios1-0/+11
This splits the upgrade script delivery out of the UpgradeWorkflow and into a new task which delivers the upgrade script for compute and object-storage nodes. This is intended to be the first part of the upgrades process, since we need to upgrade swift nodes before the controllers and then only one at a time. So this will deliver the upgrade script which can be invoked by the operator using the existing script in tripleo-common 'upgrade-non-controller.sh'. This can be invoked by passing the -e environments/major-upgrade-script-delivery.yaml (added here) to the openstack overcloud deploy command. Change-Id: I20a0d4978e907111404f8108c502ab53b69a3296
2016-02-29Merge "OpenContrail heat templates"Jenkins1-0/+22
2016-02-29Merge "Change the default value for NetworkNexusVxlanGlobalConfig"Jenkins1-1/+1
2016-02-26Merge "Nova RPC unpinning"Jenkins1-0/+2
2016-02-26Merge "Add a sample network-environment.yaml file to environments"Jenkins1-0/+50
2016-02-25Merge "Add UpgradeLevelNovaCompute parameter"Jenkins1-0/+3
2016-02-25Merge "Introduce update/upgrade workflow"Jenkins1-2/+7
2016-02-25Merge "Add resources for major upgrade in Pacemaker scenario"Jenkins1-0/+3
2016-02-24Add a sample network-environment.yaml file to environmentsDan Sneddon1-0/+50
This change adds a sample network-environment.yaml file to the environments. This sample includes pointers to NIC config files, as well as default network subnets and allocation pools. This is meant to be a demonstration of the default settings for a virtual deployment. In a real deployment, the operator would customize the settings here and point to custom NIC config templates. Change-Id: I0288c0680effea06b5f805a0d955e8bbf6152ba6
2016-02-24Nova RPC unpinningJiri Stransky1-0/+2
During upgrades, we only run Puppet on the whole deployment to converge the state, after the upgrade workflow itself has been fully completed. That is an opportunity to utilize Puppet to make sure Nova Compute RPC doesn't remain pinned to the older version. Change-Id: I6ebc813a80dfd9dfbbb213c38724487e044507b8
2016-02-24Change the default value for NetworkNexusVxlanGlobalConfigEugene Bagdasaryan1-1/+1
This parameter leads to the nonoperational state in Nexus Vxlan topology when set to True, when VNIs created but the nve peers do not get discovered on the Nexus. It is time consuming process to debug the configuration and find out that this parameter should be changed to False. To prevent future problems for the future deployment we want to default this parameter to False. Change-Id: I685ad7d212af0d9e568acbf1ccf1607d120c195e
2016-02-24Merge "Allow vncproxy to work with ssl enabled"Jenkins1-0/+3
2016-02-23Add UpgradeLevelNovaCompute parameterJiri Stransky1-0/+3
This parameter can be used for pinning (and later unpinning) the Nova Compute RPC version. Change-Id: I2f181f3b01f0b8059566d01db0152a12bbbd1c3e
2016-02-23Introduce update/upgrade workflowJiri Stransky1-2/+7
Change-Id: I7226070aa87416e79f25625647f8e3076c9e2c9a
2016-02-23Add resources for major upgrade in Pacemaker scenarioDerek Higgins1-0/+3
Add Heat software deployments to be used to upgrade major versions of OpenStack on the controller nodes. All controller services are taken down while the upgrade is in progress. The new updated yum repositories should be configured by another process e.g. the deployment artifacts transfer via Swift. Change-Id: Ia0a04e4a11d67e7a5acc53c1f8a8f01ed5ca8675 Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Co-Authored-By: Jiri Stransky <jistr@redhat.com>
2016-02-22Add extra config yaml files for big switch agents.xinwu1-0/+4
This change adds extra config yaml files for big switch agent and big switch lldp. This change is mainly for compute nodes. The changes related to controller nodes are landed at e78e1c8d9b5a7ebf327987b22091bff3ed42d1c1 This change also removes the neutron_enable_bigswitch_ml2 flag. Instead, User needs to specify NeutronMechanismDrivers: bsn_ml2 in environment file. Previous discussion about this change can be found at an abandoned review request https://review.openstack.org/#/c/271940/ Depends-On: Iefcfe698691234490504b6747ced7bb9147118de Change-Id: I81341a4b123dc4a8312a9a00f4b663c7cca63d7c
2016-02-12Minor fixes to allow local docker registry usageJeff Peeler1-1/+1
Changed the heat-docker-agents namespace to use the namespacing specified in the environment file, which reduces modifications required on the user when using a local registry. Changed the start agents script to handle using a local registry both with a namespace and without. Change-Id: I16cc96b7ecddeeda07de45f50ffc6a880dabbba6
2016-02-09Merge "Create linux bridge vlans environments"Jenkins1-0/+23
2016-01-21Merge "Add update yaml backward compatibe with PublicVirtualIP on ctlplane"Jenkins2-0/+5
2016-01-21OpenContrail heat templatesNicolas Hicher1-0/+22
Deploy a TripleO overcloud with OpenContrail Vrouter plugin configured to interact with an existing OpenContrail Server Manager. OpenContrail is an Apache 2.0-licensed project that is built using standards-based protocols and provides all the necessary components for network virtualization–SDN controller, virtual router, analytics engine, and published northbound APIs. It has an extensive REST API to configure and gather operational and analytics data from the system. Co-Authored-By: Jiri Stransky <jistr@redhat.com> Change-Id: I699a7c4ea09d024fe4d70c6a507c524f0a7aafd5
2016-01-20Create linux bridge vlans environmentsJaume Devesa1-0/+23
Define environments to create VLANs attached to a single physical nic as 'single-nic-vlans' does, but using linux_bridge instead of ovs_bridge Change-Id: I8c6fe9ec7028178f783e7d9c0a1cc67a1517eb3d
2016-01-15Allow vncproxy to work with ssl enabledBen Nemec1-0/+3
Right now our vncproxy settings are hard-coded to http and the non-ssl port. This change adds a vncproxy entry to the endpoint map and uses those values to configure the proxy correctly on compute nodes. This is sufficient to get it working in my environment with ssl enabled. Change-Id: I9d69b088eef4700959b33c7e0eb44932949d7b71
2016-01-07Merge "updating enable_ceph conditions for controller"Jenkins1-2/+3
2016-01-06Enable Dell Storage Center iscsi Backends in Cinderrajinir1-0/+17
Enables support for configuring Cinder with a Dell Storage Center iscsi storage backend. This change adds all relevant parameters for: - Dell Storage Center SC Series (iSCSI) Change-Id: I3b1a4346f494139ab123c7dc1a62f81d03c9e728
2016-01-06Merge "Enable Equallogic Backends in Cinder"Jenkins1-0/+17
2016-01-06updating enable_ceph conditions for controllerDan Radez1-2/+3
- keeping enabled based on ceph node count being greater than 0 - adding enabled if ControllerEnableCephStorage is true Intention here is to be able to run ceph without having dedicated nodes for. Enabling Ceph alternativly from the ControllerEnableCeph parameter allows ceph to be colocated on the controllers without having to run any dedicated ceph nodes. Change-Id: I71062d37226c679156380c0f4e194b51cb586bcf Signed-off-by: Dan Radez <dradez@redhat.com>