summaryrefslogtreecommitdiffstats
path: root/docker/services/neutron-ovs-agent.yaml
AgeCommit message (Collapse)AuthorFilesLines
2017-07-10Copy only generated puppet files into the containerMartin André1-1/+6
This solves a problem with bind-mounts when the containers are holding files descriptors open. At the same time this makes the template more robust to puppet changes since new config files will be available in the containers without needing to update the templates. Partial-Bug: #1698323 Change-Id: Ia4ad6d77387e3dc354cd131c2f9756939fb8f736
2017-07-03Merge "adding --config-dir parameters to neutron containers"Jenkins1-1/+1
2017-07-02adding --config-dir parameters to neutron containersOr Idgar1-1/+1
Change-Id: I521e89994e9be6efd335c5809810d9188dc1742f Closes-Bug: #1684908
2017-06-28Add heat parameter for all of config_volume imagesMartin André1-2/+2
This commit consistently defines a heat template parameter in the form of DockerXXXConfigImage where XXX represents the name of the config_volume that is used by docker-puppet. The goal is to mitigate hard to debug errors where the templates would set different defaults for the image docker-puppet.py uses to run, for the same config_volume name. This fixes a couple of inconsistencies on the way. Change-Id: I212020a76622a03521385a6cae4ce73e51ce5b6b Closes-Bug: #1699791
2017-06-09Make container names consistentMartin André1-3/+3
This commit change the container names to consistently use the `_` char as a word separator and make the kolla external config file match the container name to make operators' life easier. Change-Id: Ibac9d76dde474b94c3cb86031ead0fd0327e126f
2017-05-16Use neutron-server image for neutron servicesJuan Antonio Osorio Robles1-3/+10
For TLS everywhere, neutron-server needs httpd in the image, since it'll use a separate container that runs a TLS proxy to terminate the connection. This requires the image where the configuration is ran to have httpd installed, since there are several directories and the user/group that's needed. So, we then switch the image to be used to be neutron-server instead of the openvswitch-agent image. Change-Id: Ie16de3004925b7624f106d6c015ec04ef6031a06 Depends-On: I82f10ac0e7e692e6ba4a06dc10da9eaf79c60e7e
2017-05-15Add missing type for RoleParameters parameterMartin André1-0/+1
This was forgotten in I72376a803ec6b2ed93903cc0c95a6ffce718b6dc and broke containerized deployment. Change-Id: I599a87bf06efbfefd3067c77ed6ca866505900f9 Closes-Bug: #1690870
2017-05-15Add role specific information to the service templateSaravanan KR1-0/+9
When a service is enabled on multiple roles, the parameters for the service will be global. This change enables an option to provide role specific parameter to services and other templates. Two new parameters - RoleName and RoleParameters, are added to the service template. RoleName provides the role name of on which the current instance of the service is being applied on. RoleParameters provides the list of parameters which are configured specific to the role in the environment file, like below: parameters_default: # Default value for applied to all roles NovaReservedHostMemory: 2048 ComputeDpdkParameters: # Applied only to ComputeDpdk role NovaReservedHostMemory: 4096 In above sample, the cluster contains 2 roles - Compute, ComputeDpdk. The values of ComputeDpdkParameters will be passed on to the templates as RoleParameters while creating the stack for ComputeDpdk role. The parameter which supports role specific configuration, should find the parameter first in in the RoleParameters list, if not found, then the default (for all roles) should be used. Implements: blueprint tripleo-derive-parameters Change-Id: I72376a803ec6b2ed93903cc0c95a6ffce718b6dc
2017-05-05Mount hostpath logs on /var/logFlavio Percoco1-1/+11
Some containers are using the logs named volume for collecting logs written to `/var/log`. We should make this consistent for all the containers. This patch also cleans up some mounts that weren't needed for some services. For example, glance-api doesn't need `/run` to be mounted. Other changes: * Rework log volumes to hostpath mounts to omit slow COW writes. * Add kolla_config's permission and host_prep_tasks create and manage hostpath mounted log dirs permissions. * Rework data owning init containers to kolla_config permissions * When a step wants KOLLA_BOOTSTRAP or DB sync, use logs data owning init containers to set permissions for logs. This is required because kolla bootsrap and DB sync runs before the kolla config stage and there is yet permissions set for logs. * In order to address hybrid cases for host services vs containerized ones to access logs having different UIDs, persist containerized services' logs into separate directories (an upgrade impact) * Ensure host prep tasks to create /var/log/containers/ and /var/lib/ sub-directories for services * Fix missing /etc/httpd, /var/www config-data mounts for zaqar/ironic * Fix YAML indentation and drop strings quotation. Co-authored-by: Bogdan Dobrelya <bdobreli@redhat.com> Partial blueprint containerized-services-logs Change-Id: I53e737120bf0121bd28667f355b6f29f1b2a6b82
2017-05-02Move containers common volumes from yaql to list_concatJuan Antonio Osorio Robles1-10/+8
list_concat was introduced recently and is able to replace the yaql calls for concatenating lists. Change-Id: Id3a80a0e1e4c25b6d838898757c69ec99d0cd826
2017-04-18Introduce common resources for docker templatesJuan Antonio Osorio Robles1-5/+12
This enables common resources that the docker templates might need. The initial resource only is common volumes, and two volumes are introduced (localtime and hosts). Change-Id: Ic55af32803f9493a61f9b57aff849bfc6187d992
2017-04-03Remove kolla_config copy from servicesMartin André1-14/+1
Simplify the config of the containerized services by bind mounting in the configurations instead of specifying them all in kolla config. This is change is useful to limit the side effects of generating the config files and running the container is two separate steps as config directories are now bind-mounted inside the container instead of having files being copied to the container. We've seen examples of Apache's mod_ssl configuration file present on the container preventing it to start when puppet configured apache not to load the ssl module (in case TLS is disabled). Co-Authored-By: Ian Main <imain@redhat.com> Change-Id: I4ec5dd8b360faea71a044894a61790997f54d48a
2017-03-10Remove docker_image sections (unused)Dan Prince1-5/+4
We don't use docker_image for anything. It is a remant of the pre-composable docker templates and we can now remove it. This patch removes references to the 'docker_image' section from docker/post.yaml and all of the docker/services* templates. Change-Id: I208c1ef1550ab39ab0ee47ab282f9b1937379810
2017-03-06Enable composable upgrades for docker service templatesSteven Hardy1-0/+4
This aligns the docker based services with the new composable upgrades architecture we landed for ocata, and does a first-pass adding upgrade_tasks for the services (these may change, atm we only disable the service on the host). To run the upgrade workflow you basically do two steps: openstack overcloud deploy --templates \ -e environments/major-upgrade-composable-steps-docker.yaml This will run the ansible upgrade steps we define via upgrade_tasks then run the normal docker PostDeploySteps to bring up the containers. For the puppet workflow there's then an operator driven step where compute nodes (and potentially storage nodes) are upgrades in batches and finally you do: openstack overcloud deploy --templates \ -e environments/major-upgrade-converge-docker.yaml In the puppet case this re-applies puppet to unpin the nova RPC API so I guess it'll restart the nova containers this affects but otherwise will be a no-op (we also disable the ansible steps at this point. Depends-On: I9057d47eea15c8ba92ca34717b6b5965d4425ab1 Change-Id: Ia50169819cb959025866348b11337728f8ed5c9e
2017-03-01Put docker puppet config in puppet_config dictSteve Baker1-4/+7
This approach removes the need for the yaql zip to build the docker-puppet data by building the data in a puppet_config dict. This allows a future change to make docker-puppet.py only accept dict data. Currently the step_config is left where it is and referenced inside puppet_config, but feedback is welcome whether this is necessary or desirable. Change-Id: I4a4d7a6fd2735cb841174af305dbb62e0b3d3e8c
2017-02-15docker: new hybrid deployment architecture and configurationDan Prince1-18/+18
This patch implements a new docker deployment architecture that should us to install docker services in a stepwise manner alongside of baremetal puppet services. This works by using Yaql to select docker specific services (docker/services/*.yaml) vs the puppet specific ones and then applying the selected Json to relevant Heat software deployments for docker and baremetal puppet in a stepwise fashion. Additionally the new architecture leverages new composable services interfaces from Newton to allow configuration of per-service container configuration sets (directories that are bind mounted into kolla containers) by using the Kolla containers themselves. It does this by spinning up a throw away "configuration only" version of the container being configured itself, then running the puppet apply in that container and copying the generated config files into /var/lib/config-data. This avoids having to install all of the OpenStack dependency packages in the heat-agent-container itself (our previous approach) and should allow us to configure a much wider variety of container config files that would otherwise be impossible with the previous shared approach. The new approach (combined) should allow us to configure containers in both the undercloud and overcloud and incrementally add CI coverage to services as we containerize them. Co-Authored-By: Martin André <m.andre@redhat.com> Co-Authored-By: Ian Main <imain@redhat.com> Co-Authored-By: Flavio Percoco <flavio@redhat.com> Change-Id: Ibcff99f03e6751fbf3197adefd5d344178b71fc2
2017-01-29docker: eliminate copy-json.py in favor of json-fileDan Prince1-0/+16
This patch rewires how we configure the Kolla external config files via Heat templates and uses a more simple json-file heat hook to directly write out Kolla config files to disk. By using a heat hook instead of a shell script we can avoid Json conversion issues. Additionally, This generic json file hook will be useful for other ad-hoc Json file configuration within the TripleO docker architecture. Co-Authored-By: Martin André <m.andre@redhat.com> Change-Id: I8c72a4a9a7022f722bfe1cef3e18517605720cce Depends-On: I2b372ac2e291339e436202c9fe58a681ed6a743f Depends-On: Id3f779b11e23fd3122ef29b7ccbae116667d4520
2017-01-17Simplify passing config to ovs agent containerMartin André1-8/+1
The mechanism to pass config files to the neutron-ovs-agent container was overly complex and not at all justified. This commit removes a few useless parameters and aligns the neutron-ovs-agents with the rest of the containers. Change-Id: Ib9a5985ac9d098731c2fb798d6c9e03cba4b87dd
2016-12-23Bump template version for all templates to "ocata"Steven Hardy1-1/+1
Heat now supports release name aliases, so we can replace the inconsistent mix of date related versions with one consistent version that aligns with the supported version of heat for this t-h-t branch. This should also help new users who sometimes copy/paste old templates and discover intrinsic functions in the t-h-t docs don't work because their template version is too old. Change-Id: Ib415e7290fea27447460baa280291492df197e54
2016-11-22Containerized Services for Composable RolesIan Main1-0/+75
This change modifies the template interface to support containers and converts the compute services to composable roles. Co-Authored-By: Dan Prince <dprince@redhat.com> Co-Authored-By: Flavio Percoco <flavio@redhat.com> Co-Authored-By: Martin André <m.andre@redhat.com> Co-Authored-By: Steve Baker <sbaker@redhat.com> Change-Id: I82fa58e19de94ec78ca242154bc6ecc592112d1b