aboutsummaryrefslogtreecommitdiffstats
path: root/controller.yaml
AgeCommit message (Collapse)AuthorFilesLines
2015-05-21Merge "Overcloud: bump HOT version to 2015-04-30"Jenkins1-1/+1
2015-05-20Overcloud: bump HOT version to 2015-04-30Dan Prince1-1/+1
This patch bumps the HOT version for the overcloud to Kilo 2015-04-30. We should have already done this since we are making use of OS::stack_id (a kilo feature) in some of the nested stacks. Also, this will give us access to the new repeat function as well. Change-Id: Ic534e5aeb03bd53296dc4d98c2ac5971464d7fe4
2015-05-20Use clustercheck script to control galera-readyGiulio Fidente1-4/+0
The exec timeout/attempts is configured so that it is left running for up to 30mins if the command runs but is unsuccessfull and up to 2h if the command times out. Change-Id: I4b6b77e878017bf92d7c59c868d393e74405a355
2015-05-13Add Galera as a Pacemaker resource when EnablePacemakerYanis Guenane1-0/+4
This commit aims to support the creation of the galera cluster via Pacemaker. With this commit in, three use-cases will be supported. * Non HA setup / Non Pacemaker setup : The deployment will take place as it is currently the case in f20puppet-nonha. Nothing changes. * Non HA setup / Pacemaker setup : Even though it is a non ha setup, galera cluster via pacemaker will be deployed with a cluster nbr of 1. * HA setup / Non Pacemaker setup : N/A * HA setup / Pacemaker setup : It is assumed that HA setup will always be with pacemaker. So in this situation pacemaker will deploy a cluster of 3 galera master nodes. Depends-On: I7aed9acec11486e0f4f67e4d522727476c767d83 Change-Id: If0c37a86fa8b5aa6d452129bccf7341a3a3ba667
2015-05-05Merge "puppet: install Horizon on overcloud-controller"Jenkins1-0/+3
2015-05-04Merge "Add support for Glance RBD backend"Jenkins1-0/+7
2015-05-04Add support for Glance RBD backendDan Prince1-0/+7
This patch adds support for a new GlanceBackend setting which can be set to one of swift, rbd, or file to control which Glance backend is configured for use by default. Change-Id: Id6a3fbc3477e85e8e2446e3dc13d424f9535d0ff
2015-04-30Merge "Allow deployer to choose Ceilometer backend"Jenkins1-0/+4
2015-04-29Allow deployer to choose Ceilometer backendYanis Guenane1-0/+4
Ceilometer can use different backends. A recent change moved backend support for Ceilometer from MySQL to MongoDB. This commit introduce a greater flexibility, letting the deployer choose wheter MySQL or MongoDB should be used as a backend for Ceilometer. Change-Id: I0d5bfb0763cbcee234df7ab13574d866743d5ddf
2015-04-28Remove hardcoded references to .novalocal in hostnamesGiulio Fidente1-1/+1
Remove references to the .novalocal domain part in the hosts file. Change-Id: Idf14907adaf2f35440b6f28870fe18434eadd1be Depends-On: Iadfdf4120c4d1c9b6976321753957fd4eecf301c
2015-04-27Merge "Make all default values match overcloud defaults"Jenkins1-2/+2
2015-04-27puppet: install Horizon on overcloud-controllerEmilien Macchi1-0/+3
Install OpenStack Dashboad (Horizon) on the Overcloud Controller with Puppet. Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Depends-On: If9b12d373e407be8be8428d77145f131eb450e88 Change-Id: I254e895014f58a51dade3dcdc63eabbb5dc458ac
2015-04-24Separate the network configuration per flavor.Dan Sneddon1-1/+1
This change allows a different network config for each family of hosts. For instance, the controller may have a different network configuration than a block storage node. This change adds a declaration for each family in the overcloud-resource-registry.yaml & overcloud-resource-registry-puppet.yaml. Change-Id: I083df7ebbb535f97d8ddec2ac0e06281c55986cd
2015-04-24Enable passing optional first-boot user-dataSteven Hardy1-0/+4
Currently all the OS::Nova::Server resource created don't pass any user-data. It's possible to pass user-data as well as using heat SoftwareConfig/SoftwareDeployment resources, and this can be useful when you have simple "first boot" tasks which are possible either via cloud-init, or via simple run-once scripts. This enables passing such data by implementing a new provider resource OS::TripleO::NodeUserData, which defaults to passing an empty mime archive (thus it's a no-op). An example of non no-op usage is also provided. Change-Id: Id0caba69768630e3a10439ba1fc2547a609c0cfe
2015-04-22Merge "Set EnablePacemaker == false be default"Jenkins1-1/+1
2015-04-22Set EnablePacemaker == false be defaultDan Prince1-1/+1
Pacemaker is a new feature and should probably be disabled by default. Change-Id: I840d08c9e0563aeb7128eb2b21929612b7a5bf7a
2015-04-21Parameter to enable/disable controller swift storeDan Prince1-0/+4
Adds a new ControllerEnableSwiftStorage parameter that can be used to enable/disable use of the contoller node as a Swift storage node. Change-Id: Ic54144f4a46a671818c2f12e419cfa619b0dc1f9
2015-04-21Add option to enable ceph storage on controllerDan Prince1-0/+4
This patch adds a new ControllerEnableCephStorage option which can be used to install and configure Ceph storage (OSD) on the controller node. The default is to have this disabled by default (this is probably a more production like setting). The motivation for this change is to help facilitate CI jobs which actually use Ceph. Right now we have an issue where once the Heat stack finishes Ceph is configured and ready, but Cinder volume (required by our CI devtest_overcloud.sh test) may or may not have had enough time to recognize the amount of storage on the remote Ceph storage nodes. Waiting another periodic cycle for Cinder volume to recognize the actual amount of storage on the remote OSD nodes would work but there isn't a good way to do this ATM. The right solution here is probably to implement Heat breakpoints in our CI. As we haven't quite landed that change, another option is to simply make the controller node also be a Ceph storage node. Since this runs as "step 2" within the controller it ensures that the OSD will be available and thus Cinder volume will register the correct amount of storage on startup. Enabling this feature also matches what we do with Swift storage on the Controller (although we should provide an option to actually disable this as well). Change-Id: Ic47d028591edbaab83a52d7f38283d7805b63042
2015-04-20Perform basic setup of Pacemaker cluster using puppet-pacemakerGiulio Fidente1-3/+8
Depends-On: Ia1bbf53c674e34ba7c70249895b106ec0af3c249 Change-Id: Ifa9f579d26a3cba9f8705226984c7b987ae0ad1c
2015-04-14Perform basic setup of pacemaker cluster on controllersGiulio Fidente1-0/+3
Change-Id: Ia2e4eae619ca95c0f417f713676732eb4f01304b Depends-On: I9563eec0a2266deb2ebef2e3d76ae89d39b2be29
2015-04-10MariaDB bind on correct addressJiri Stransky1-0/+4
Despite passing bind-address for MariaDB in overcloud_controller.pp correctly, it was always trying to bind on 0.0.0.0. The problem is caused by Galera's config file (we install Galera into the image even though we don't use it yet). Galera's default config file contains override of the bind-address value to 0.0.0.0, and the setting from galera.cnf took precendence over what was in server.cnf. The mariadb-galera-server package assumes that the main config happens in galera.cnf and it ships an almost empty server.cnf. We now have an EnableGalera param, when it's set to true the mysql module will manage galera.cnf instead of server.cnf, overriding the default values from galera.cnf and fixing the issue. Change-Id: I7c2fd41d41dcf5eb4ee8b1dbd74d60cc2cabeed9 Closes-Bug: #1442256
2015-04-09Make all default values match overcloud defaultsJeff Peeler1-2/+2
It's very confusing for them to be different, especially in the case of comparing Tuskar vs non-Tuskar deployments where the parameters are read from different files. Note: NeutronPhysicalBridge is named differently in the overcloud template (HypervisorNeutronPhysicalBridge). This is the only parameter checked that isn't named exactly the same, hopefully there aren't any others. (Checked controller, compute, ceph, cinder, and swift for both puppet and non-puppet templates) Change-Id: I48ce1eb40d2d080c589ce619c50eddff17efe882
2015-03-18Add support for Ceph as a Cinder and Nova backendYanis Guenane1-0/+4
This commit aims to add support for Ceph as a cinder and a nova backend. * Allows creation of Ceph pools from heat (Default: volumes, vms) * Creates the proper ceph user and inject the keys * Applies the proper configuration in cinder.conf and nova.conf * Enable the backend out of the box Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Change-Id: Ic17d7a665de81a8bab5e34035abe90eda4bc889f
2015-03-16Merge "Make heat auth_encryption_key random"Jenkins1-1/+5
2015-03-13Make heat auth_encryption_key randomSteven Hardy1-1/+5
Currently we have a hard-coded default for auth_encryption_key, which isn't ideal as it's used as a salt for the DB encryption. Instead, reference an OS::Heat::RandomString resource so we create a random key for each deployment. Change-Id: Ic76b89db17603c114d98d28c01f75cc287fb2e90
2015-03-12Use Cinder multibackend by defaultYanis Guenane1-0/+4
Currently Cinder iscsi backend is configured within the DEFAULT section. Since we aim to support multibackend, this commit puts the iscsi backend in its own section and enable it by default configuring it properly. Also adds a parameter which can be used to disable the default backend. Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Change-Id: I05fb44b59829c0afa8a6588956a48320f2f65159
2015-01-27Swift: set default replicas to 3Dan Prince1-1/+1
Our existing default (replicas == 1) means that no data (or copies) is being replicated in a multi-node Swift environment. This seems like a bad production default setting and could easily slip by if not set. Setting it to 3 shouldn't hurt anything and seems to follow suit with what several production installers (based around Puppet) actually use. If using an installation with less than 3 swift nodes I believe swift will do its best, and still work fine. FWIW I noticed this when testing a multi-node Puppet swift installation and was surprised when I didn't see any *data files getting replicated across the storage cluster. Change-Id: I44bdfff7aae6bdf845b79ca1f8f450c22113caed
2015-01-27Controller: consolidated nested stackDan Prince1-7/+224
In I228216a0b55ff2d384b281d9ad2a61b93d58dab9 we split out just the Controller software config in an effort to provide hooks for alternate implementations (puppet). This sort of worked but caused quirky ordering issues with signal handling. It also causes problems for Tuskar which would prefer to think of these nested stacks and not have us split out just the software configs like this. This patch moves all the controller related stuff for our two implementations: controller.yaml: is used by os-apply-config (uses the tripleo-image-elements) controller-puppet.yaml: uses stackforge puppet-* modules for configuration By duplicating the entire controller in this manner we make it much easier to create dependencies and implement proper signal handling. The only (temporary) downside is the duplication of parameters most of which will eventually go away when we move towards using the global parameters via Heat environment files instead. Change-Id: Iaf3c889d7c8815f862308cd8e15ce1010059f5c6
2015-01-27Merge "Add parameter to manage usage of Neutron l3_ha option"Jenkins1-0/+4
2015-01-09Add parameter to manage usage of Neutron l3_ha optionGiulio Fidente1-0/+4
This change will allow for the enablement of Neutron routers HA via the new NeutronL3HA parameter. Change-Id: Ia5f7c0b4e89159456482e840c50d166ec5f25d4c Implements: blueprint tripleo-icehouse-ha-production-configuration
2015-01-09Add SwiftMountCheck to overcloud-without-mergepyDan Prince1-0/+6
This was added in I36fece56bafa9fe9c4883b572687b3fc819eeae1 and is missing from overcloud-without-mergepy. Change-Id: I5c2566cc77247574f8d687eaab8094de481a8c67
2015-01-09Add SwiftMinPartHours to overcloud-without-mergepyDan Prince1-0/+6
This was added in Icc5e431a7e2884b3ca3a255b6fd901619bc98460 and is missing from overcloud-without-mergepy. Change-Id: I1273b646c04783712fd3f8baccafead11817689c
2015-01-08Merge "Controller: Drive os-net-config via software conf"Jenkins1-0/+13
2015-01-08Merge "Controller: Split out software config"Jenkins1-262/+103
2015-01-05Controller: Drive os-net-config via software confDan Prince1-0/+13
This example extends the controller software configuration so that heat metadata is used to model the os-net-config YAML (ultimately JSON) directly. The existing os-net-config element already supports this format. Configuring the physical network layer in this manner would supplant the ever growing list of Heat parameters that we have and is something that could be automatically generated via tuskar. The default is to use net-config-noop.yaml which will pass no config metadata into the os-net-config element which will essentially disable it in favor of using parameters w/ init-neutron-ovs. Change-Id: Ifba60454ee11222173a9762882e767a836a4545c
2015-01-05Controller: Split out software configDan Prince1-262/+103
This is a step towards supporting pluggable software configurations in the heat templates. By moving controller-config out of controller.yaml we make it possible to define alternate implementations by changing the OS::TripleO::ControllerConfig value in the overcloud-resource-registry.yaml heat environment file. Change-Id: I228216a0b55ff2d384b281d9ad2a61b93d58dab9
2015-01-02Drop the MysqlClusterUniquePart validationDan Prince1-2/+3
Trying to use overcloud-without-mergepy currently fails with a validation error around MysqlClusterUniquePart. This works around the issue by temporarily dropping the validation. Change-Id: If93945a2c3396b07b592d08efb1f66e11d6194dd Partial-bug: #1405446
2014-12-19Merge "Set default network interfaces to nic1"Jenkins1-1/+1
2014-12-09Merge "Remove default flavor from every template"Jenkins1-1/+0
2014-12-09Merge "bump up the number of sesson limit for rabbitmq"Jenkins1-0/+1
2014-12-05Add missing novncproxy settings to controllerDan Prince1-0/+3
This patch adds the missing HAProxy novncproxy parameters to controller.yaml These parameters were adding to overcloud-source.yaml in I0c6a3d6a8fd10da71abbf568633b28bdb5e56aa2. Change-Id: Icff2f17a301e5e95fa43549ec1566c0c0d5b5353
2014-12-05Add missing HAProxy settings to controllerDan Prince1-0/+6
This patch adds the missing parameters to controller.yaml These parameters were adding to overcloud-source.yaml in I1581c091b996422fb1374ea4c024d0a88453e10b. Change-Id: I3e4e0e1feb521dded2679fed508fa97e8dd27661
2014-12-05Add missing Neutron DVR params to without-mergepyDan Prince1-1/+27
This patch adds the missing parameters to overcloud-without-mergepy.yaml. These parameters were adding to overcloud-source.yaml in I422c65e7d941593083d52ad7fdf0dfd1d2fb3155. Due to the concurrent review window they never made it into the new overcloud-without-mergepy.yaml implementation. Change-Id: If54dc111aec852f906c9e7ac1bf56f9dcaf678ea
2014-12-05Add missing Keystone params to without-mergepyDan Prince1-0/+12
This patch adds the missing KeystoneSSLCertificate and KeystoneSSLCertificateKey to overcloud-without-mergepy.yaml. These parameters were adding to overcloud-source.yaml in Icf46132230512a31b6dec3c07164c95b13dd8f73. Due to the concurrent review window they never made it into the new overcloud-without-mergepy.yaml implementation. Change-Id: I8b1155ca0a28392e5d5ade57d53bf810d8b5f053
2014-12-05Add missing Rabbit params to without-mergepyDan Prince1-0/+12
This patch adds the missing RabbitClientUseSSL and RabbitClientPort to overcloud-without-mergepy.yaml. These parameters were adding to overcloud-source.yaml in I7b7613cb60b9095ba5665c335c496fea4514391a. Due to the concurrent review window they never made it into the new overcloud-without-mergepy.yaml implementation. Change-Id: I182671b84d0a21d7018eb136003968f101384716
2014-12-05Set default network interfaces to nic1Dan Prince1-1/+1
Now that we are using os-net-config we can make use of the nic naming abstraction layer where the actual physical nic name is mapped automatically. This change removes all the eth0 references and replaces them with nic1 which should make it more likely that these default values would actually work on some distributions. It also removes the single instance of eth2 in the undercloud-bm-nova-deploy.yaml template and replaces it with nic1 as well. Underclouds aren't a special case in this regard (I run my bare metal undercloud on em1) so there is no good reason to default to the second nic. Change-Id: I3ea92a502bc4b8789f74913f232ac8bc6b843008
2014-11-28bump up the number of sesson limit for rabbitmqJerry Zhao1-0/+1
the default maxconn is only 150, which maybe good for api services but not enough for the rabbitmq session in a cluster as small as 15 nodes. so bump up the number to 1500 for rabbitmq to allow for 100 nodes. this number should be calculated based on the scale numbers in the long run. Closes-bug: #1386406 Change-Id: Ieb707b31022a6fc9ade32ed2a332b67bf4dc0311
2014-11-27Remove default flavor from every templateSteve Kowalik1-1/+0
With the push to using the new setup-flavors provided by os-cloud-config, the default flavor will no longer be called 'baremetal', and Heat will always validate the default even if it is overridden. To that end, remove the default flavor from every flavor definition. Just to be certain, also add a custom_constraint to every flavor definition that was missing it. Change-Id: I24251e73be4e86738857f73b89499f592c4908de
2014-10-31Merge "Use parameter constraints for image, key and flavor"Jenkins1-0/+6
2014-10-23Use parameter constraints for image, key and flavorSteven Hardy1-0/+6
If you don't have (or provide) the wrong image, KeyName, or flavor, we fail at some later point (not always early, depending on what's wrong). Since Icehouse, Heat has had a "custom constraints" method of dynamically validating parameter values, by comparing the value provided with a list from the underlying service. Despite the name, there's nothing "custom" about the constraints, these ones are included in Heat by default (though they are pluggable, which is where the name comes from..) See the docs for more info: http://docs.openstack.org/developer/heat/template_guide/hot_spec.html#custom-constraint Note, I've not considered network validation here, this could possibly be added in a subsequent patch. These constraints are evaluated via any of the following: - heat template-validate -f <template> - heat stack-preview <arguments given to create> - heat stack-create <arguments, fails fast before creating anything> - heat stack-update <arguments, fails fast before updating anything> Change-Id: I3a6374ce5421575cdde893c62aa97c750a07acd8