summaryrefslogtreecommitdiffstats
path: root/controller.yaml
AgeCommit message (Collapse)AuthorFilesLines
2015-06-09Merge "Add Redis as a Pacemaker resource"Jenkins1-0/+3
2015-06-08Config & deployments to update overcloud packagesSteve Baker1-0/+6
This change adds config and deployment resources to trigger package updates on nodes. The deployments are triggered by doing a stack-update and setting one of the parameters to a unique value. The intent is that rolling update will be controlled by setting breakpoints on all of the UpdateDeployment resources inside the role resource groups. Change-Id: I56bbf944ecd6cbdbf116021b8a53f9f9111c134f
2015-06-05Add Redis as a Pacemaker resourceYanis Guenane1-0/+3
Change-Id: I731b408f24da01c1bc897bfffe8fd4d5638932ed
2015-06-05Wire Neutron VLAN ranges param as array to puppetGiulio Fidente1-1/+1
Turns NeutronNetworkVLANRanges into a list and makes it consumable by neutron::plugins::ml2::network_vlan_ranges as an array. Previously usage of vlans was impossible due to puppet-neutron failing to join() network_vlan_ranges. Also fixes wiring of network_vlan_ranges on computes and adds a sample environment file to test use of vlans for tenant networks. Change-Id: I8725cdb9591dd8d0b7125fdacbefdc9138703266
2015-06-04puppet controller role: per service VIP settingsDan Prince1-0/+15
This patch refactors the puppet controller role so that it makes use of per service VIP settings for each service. Previously the VIP for the ctlplane was hard wired to many of the controller service. With this patch we have the ability to isolate traffic for services which made use of the ctlplane and public VIPs for their settings. The implementation includes: * stops the use of the VirtualIP and PublicVirtualIP within the controller role. These parameters have now been replaced with per service heat parameters for the controller nested stack which are determined via VipMap based on per service settings in the heat environment. * All VIP configuration is now moved into puppet/vip-config.yaml. This made sense so we could deprecate the use of the VirtualIP and PublicVirtualIP settings above. * The puppet manifests for the controller were cleaned up for several to use Hiera directly instead of constructing URLs based on the static controller and public network VIPs. This improvement was something we wanted to do anyways and made the implementation cleaner. Change-Id: I9b9a15be67f74bec97366408f7047acfd6ea0ec6
2015-06-03Wire ServiceNetMap as a top level parameterDan Prince1-1/+5
This patch makes ServiceNetMap a top level parameter. This is helpful to tools like Tuskar which don't support Heat environments that contain both a resource_registry and default_parameters. ServiceNetMap will in fact be utilized at the top level in some of the VIP related patches that follow. Change-Id: I375063dacf5f3fc68e6df93e11c3e88f48aa3c3a
2015-05-27Merge "Reuse the various service passwords as db passwords."Jenkins1-14/+28
2015-05-26Switch net-config templates to use OS::stack_idDan Prince1-1/+1
This patch removes the custom config_id outputs and replaces it with OS::stack_id which allows us to just call get_resource in the parent stack. The motivation for this change is we'll be adding more os-net-config templates and it would be nice to take advantage of this newer template feature. Change-Id: I6fcb26024b94420779b86766e16d8a24210c4f8e
2015-05-26Add isolated network ports to controller rolesDan Prince1-0/+46
This patch updates the controller roles so that they can optionally make use of isolated network ports on each of 5 available overcloud networks. -Multiple networks are created based upon settings in the heat resource registry. These nets will either use the noop network (the control plane pass-thru default) or create a custom Neutron port on each of the configured networks. -The ipaddress/subnet of each network is passed passed into the NetworkConfig resource which drives os-net-config. This allows the deployer to define a custom network template for static IPs, etc on each of the networks. -The ipaddress is exposed as an output parameter. By exposing the individual addresses as outputs we allow Heat to construct collections of ports for various services. Change-Id: I9bbd6c8f5b9697ab605bcdb5f84280bed74a8d66
2015-05-21Merge "Overcloud: bump HOT version to 2015-04-30"Jenkins1-1/+1
2015-05-20Overcloud: bump HOT version to 2015-04-30Dan Prince1-1/+1
This patch bumps the HOT version for the overcloud to Kilo 2015-04-30. We should have already done this since we are making use of OS::stack_id (a kilo feature) in some of the nested stacks. Also, this will give us access to the new repeat function as well. Change-Id: Ic534e5aeb03bd53296dc4d98c2ac5971464d7fe4
2015-05-20Use clustercheck script to control galera-readyGiulio Fidente1-4/+0
The exec timeout/attempts is configured so that it is left running for up to 30mins if the command runs but is unsuccessfull and up to 2h if the command times out. Change-Id: I4b6b77e878017bf92d7c59c868d393e74405a355
2015-05-13Add Galera as a Pacemaker resource when EnablePacemakerYanis Guenane1-0/+4
This commit aims to support the creation of the galera cluster via Pacemaker. With this commit in, three use-cases will be supported. * Non HA setup / Non Pacemaker setup : The deployment will take place as it is currently the case in f20puppet-nonha. Nothing changes. * Non HA setup / Pacemaker setup : Even though it is a non ha setup, galera cluster via pacemaker will be deployed with a cluster nbr of 1. * HA setup / Non Pacemaker setup : N/A * HA setup / Pacemaker setup : It is assumed that HA setup will always be with pacemaker. So in this situation pacemaker will deploy a cluster of 3 galera master nodes. Depends-On: I7aed9acec11486e0f4f67e4d522727476c767d83 Change-Id: If0c37a86fa8b5aa6d452129bccf7341a3a3ba667
2015-05-05Merge "puppet: install Horizon on overcloud-controller"Jenkins1-0/+3
2015-05-04Merge "Add support for Glance RBD backend"Jenkins1-0/+7
2015-05-04Add support for Glance RBD backendDan Prince1-0/+7
This patch adds support for a new GlanceBackend setting which can be set to one of swift, rbd, or file to control which Glance backend is configured for use by default. Change-Id: Id6a3fbc3477e85e8e2446e3dc13d424f9535d0ff
2015-05-01Reuse the various service passwords as db passwords.Derek Higgins1-14/+28
We need to stop using "unset" as the password for all databases. Ideally we would add a "XxxxDSN" parameter (e.g. KeystoneDSN) but this wont work because we don't know the VirtualIP to pass in. Until we can come up with a better solution we should at least get rid of the "unset" passwords. Change-Id: I31f45912fa9c116ccdee010a2c5d91ea43a25671 Depends-On: I8ffe1eb481f615b0fbe127cd8107f1e70794c839
2015-04-30Merge "Allow deployer to choose Ceilometer backend"Jenkins1-0/+4
2015-04-29Allow deployer to choose Ceilometer backendYanis Guenane1-0/+4
Ceilometer can use different backends. A recent change moved backend support for Ceilometer from MySQL to MongoDB. This commit introduce a greater flexibility, letting the deployer choose wheter MySQL or MongoDB should be used as a backend for Ceilometer. Change-Id: I0d5bfb0763cbcee234df7ab13574d866743d5ddf
2015-04-28Remove hardcoded references to .novalocal in hostnamesGiulio Fidente1-1/+1
Remove references to the .novalocal domain part in the hosts file. Change-Id: Idf14907adaf2f35440b6f28870fe18434eadd1be Depends-On: Iadfdf4120c4d1c9b6976321753957fd4eecf301c
2015-04-27Merge "Make all default values match overcloud defaults"Jenkins1-2/+2
2015-04-27puppet: install Horizon on overcloud-controllerEmilien Macchi1-0/+3
Install OpenStack Dashboad (Horizon) on the Overcloud Controller with Puppet. Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Depends-On: If9b12d373e407be8be8428d77145f131eb450e88 Change-Id: I254e895014f58a51dade3dcdc63eabbb5dc458ac
2015-04-24Separate the network configuration per flavor.Dan Sneddon1-1/+1
This change allows a different network config for each family of hosts. For instance, the controller may have a different network configuration than a block storage node. This change adds a declaration for each family in the overcloud-resource-registry.yaml & overcloud-resource-registry-puppet.yaml. Change-Id: I083df7ebbb535f97d8ddec2ac0e06281c55986cd
2015-04-24Enable passing optional first-boot user-dataSteven Hardy1-0/+4
Currently all the OS::Nova::Server resource created don't pass any user-data. It's possible to pass user-data as well as using heat SoftwareConfig/SoftwareDeployment resources, and this can be useful when you have simple "first boot" tasks which are possible either via cloud-init, or via simple run-once scripts. This enables passing such data by implementing a new provider resource OS::TripleO::NodeUserData, which defaults to passing an empty mime archive (thus it's a no-op). An example of non no-op usage is also provided. Change-Id: Id0caba69768630e3a10439ba1fc2547a609c0cfe
2015-04-22Merge "Set EnablePacemaker == false be default"Jenkins1-1/+1
2015-04-22Set EnablePacemaker == false be defaultDan Prince1-1/+1
Pacemaker is a new feature and should probably be disabled by default. Change-Id: I840d08c9e0563aeb7128eb2b21929612b7a5bf7a
2015-04-21Parameter to enable/disable controller swift storeDan Prince1-0/+4
Adds a new ControllerEnableSwiftStorage parameter that can be used to enable/disable use of the contoller node as a Swift storage node. Change-Id: Ic54144f4a46a671818c2f12e419cfa619b0dc1f9
2015-04-21Add option to enable ceph storage on controllerDan Prince1-0/+4
This patch adds a new ControllerEnableCephStorage option which can be used to install and configure Ceph storage (OSD) on the controller node. The default is to have this disabled by default (this is probably a more production like setting). The motivation for this change is to help facilitate CI jobs which actually use Ceph. Right now we have an issue where once the Heat stack finishes Ceph is configured and ready, but Cinder volume (required by our CI devtest_overcloud.sh test) may or may not have had enough time to recognize the amount of storage on the remote Ceph storage nodes. Waiting another periodic cycle for Cinder volume to recognize the actual amount of storage on the remote OSD nodes would work but there isn't a good way to do this ATM. The right solution here is probably to implement Heat breakpoints in our CI. As we haven't quite landed that change, another option is to simply make the controller node also be a Ceph storage node. Since this runs as "step 2" within the controller it ensures that the OSD will be available and thus Cinder volume will register the correct amount of storage on startup. Enabling this feature also matches what we do with Swift storage on the Controller (although we should provide an option to actually disable this as well). Change-Id: Ic47d028591edbaab83a52d7f38283d7805b63042
2015-04-20Perform basic setup of Pacemaker cluster using puppet-pacemakerGiulio Fidente1-3/+8
Depends-On: Ia1bbf53c674e34ba7c70249895b106ec0af3c249 Change-Id: Ifa9f579d26a3cba9f8705226984c7b987ae0ad1c
2015-04-14Perform basic setup of pacemaker cluster on controllersGiulio Fidente1-0/+3
Change-Id: Ia2e4eae619ca95c0f417f713676732eb4f01304b Depends-On: I9563eec0a2266deb2ebef2e3d76ae89d39b2be29
2015-04-10MariaDB bind on correct addressJiri Stransky1-0/+4
Despite passing bind-address for MariaDB in overcloud_controller.pp correctly, it was always trying to bind on 0.0.0.0. The problem is caused by Galera's config file (we install Galera into the image even though we don't use it yet). Galera's default config file contains override of the bind-address value to 0.0.0.0, and the setting from galera.cnf took precendence over what was in server.cnf. The mariadb-galera-server package assumes that the main config happens in galera.cnf and it ships an almost empty server.cnf. We now have an EnableGalera param, when it's set to true the mysql module will manage galera.cnf instead of server.cnf, overriding the default values from galera.cnf and fixing the issue. Change-Id: I7c2fd41d41dcf5eb4ee8b1dbd74d60cc2cabeed9 Closes-Bug: #1442256
2015-04-09Make all default values match overcloud defaultsJeff Peeler1-2/+2
It's very confusing for them to be different, especially in the case of comparing Tuskar vs non-Tuskar deployments where the parameters are read from different files. Note: NeutronPhysicalBridge is named differently in the overcloud template (HypervisorNeutronPhysicalBridge). This is the only parameter checked that isn't named exactly the same, hopefully there aren't any others. (Checked controller, compute, ceph, cinder, and swift for both puppet and non-puppet templates) Change-Id: I48ce1eb40d2d080c589ce619c50eddff17efe882
2015-03-18Add support for Ceph as a Cinder and Nova backendYanis Guenane1-0/+4
This commit aims to add support for Ceph as a cinder and a nova backend. * Allows creation of Ceph pools from heat (Default: volumes, vms) * Creates the proper ceph user and inject the keys * Applies the proper configuration in cinder.conf and nova.conf * Enable the backend out of the box Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Change-Id: Ic17d7a665de81a8bab5e34035abe90eda4bc889f
2015-03-16Merge "Make heat auth_encryption_key random"Jenkins1-1/+5
2015-03-13Make heat auth_encryption_key randomSteven Hardy1-1/+5
Currently we have a hard-coded default for auth_encryption_key, which isn't ideal as it's used as a salt for the DB encryption. Instead, reference an OS::Heat::RandomString resource so we create a random key for each deployment. Change-Id: Ic76b89db17603c114d98d28c01f75cc287fb2e90
2015-03-12Use Cinder multibackend by defaultYanis Guenane1-0/+4
Currently Cinder iscsi backend is configured within the DEFAULT section. Since we aim to support multibackend, this commit puts the iscsi backend in its own section and enable it by default configuring it properly. Also adds a parameter which can be used to disable the default backend. Co-Authored-By: Giulio Fidente <gfidente@redhat.com> Change-Id: I05fb44b59829c0afa8a6588956a48320f2f65159
2015-01-27Swift: set default replicas to 3Dan Prince1-1/+1
Our existing default (replicas == 1) means that no data (or copies) is being replicated in a multi-node Swift environment. This seems like a bad production default setting and could easily slip by if not set. Setting it to 3 shouldn't hurt anything and seems to follow suit with what several production installers (based around Puppet) actually use. If using an installation with less than 3 swift nodes I believe swift will do its best, and still work fine. FWIW I noticed this when testing a multi-node Puppet swift installation and was surprised when I didn't see any *data files getting replicated across the storage cluster. Change-Id: I44bdfff7aae6bdf845b79ca1f8f450c22113caed
2015-01-27Controller: consolidated nested stackDan Prince1-7/+224
In I228216a0b55ff2d384b281d9ad2a61b93d58dab9 we split out just the Controller software config in an effort to provide hooks for alternate implementations (puppet). This sort of worked but caused quirky ordering issues with signal handling. It also causes problems for Tuskar which would prefer to think of these nested stacks and not have us split out just the software configs like this. This patch moves all the controller related stuff for our two implementations: controller.yaml: is used by os-apply-config (uses the tripleo-image-elements) controller-puppet.yaml: uses stackforge puppet-* modules for configuration By duplicating the entire controller in this manner we make it much easier to create dependencies and implement proper signal handling. The only (temporary) downside is the duplication of parameters most of which will eventually go away when we move towards using the global parameters via Heat environment files instead. Change-Id: Iaf3c889d7c8815f862308cd8e15ce1010059f5c6
2015-01-27Merge "Add parameter to manage usage of Neutron l3_ha option"Jenkins1-0/+4
2015-01-09Add parameter to manage usage of Neutron l3_ha optionGiulio Fidente1-0/+4
This change will allow for the enablement of Neutron routers HA via the new NeutronL3HA parameter. Change-Id: Ia5f7c0b4e89159456482e840c50d166ec5f25d4c Implements: blueprint tripleo-icehouse-ha-production-configuration
2015-01-09Add SwiftMountCheck to overcloud-without-mergepyDan Prince1-0/+6
This was added in I36fece56bafa9fe9c4883b572687b3fc819eeae1 and is missing from overcloud-without-mergepy. Change-Id: I5c2566cc77247574f8d687eaab8094de481a8c67
2015-01-09Add SwiftMinPartHours to overcloud-without-mergepyDan Prince1-0/+6
This was added in Icc5e431a7e2884b3ca3a255b6fd901619bc98460 and is missing from overcloud-without-mergepy. Change-Id: I1273b646c04783712fd3f8baccafead11817689c
2015-01-08Merge "Controller: Drive os-net-config via software conf"Jenkins1-0/+13
2015-01-08Merge "Controller: Split out software config"Jenkins1-262/+103
2015-01-05Controller: Drive os-net-config via software confDan Prince1-0/+13
This example extends the controller software configuration so that heat metadata is used to model the os-net-config YAML (ultimately JSON) directly. The existing os-net-config element already supports this format. Configuring the physical network layer in this manner would supplant the ever growing list of Heat parameters that we have and is something that could be automatically generated via tuskar. The default is to use net-config-noop.yaml which will pass no config metadata into the os-net-config element which will essentially disable it in favor of using parameters w/ init-neutron-ovs. Change-Id: Ifba60454ee11222173a9762882e767a836a4545c
2015-01-05Controller: Split out software configDan Prince1-262/+103
This is a step towards supporting pluggable software configurations in the heat templates. By moving controller-config out of controller.yaml we make it possible to define alternate implementations by changing the OS::TripleO::ControllerConfig value in the overcloud-resource-registry.yaml heat environment file. Change-Id: I228216a0b55ff2d384b281d9ad2a61b93d58dab9
2015-01-02Drop the MysqlClusterUniquePart validationDan Prince1-2/+3
Trying to use overcloud-without-mergepy currently fails with a validation error around MysqlClusterUniquePart. This works around the issue by temporarily dropping the validation. Change-Id: If93945a2c3396b07b592d08efb1f66e11d6194dd Partial-bug: #1405446
2014-12-19Merge "Set default network interfaces to nic1"Jenkins1-1/+1
2014-12-09Merge "Remove default flavor from every template"Jenkins1-1/+0
2014-12-09Merge "bump up the number of sesson limit for rabbitmq"Jenkins1-0/+1