aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07Merge "Move ordering constraints from httpd to openstack-core"Jenkins1-42/+57
2016-03-07Set host in nova.conf for compute nodesJames Slagle1-0/+4
In order for instance HA to function safely, nova-compute needs access to the name by which nova knows the current compute node. Since the names of the nova-compute and neutron ml2 agents must be the same for vif binding to work, it also sets the host value in neutron.conf. Change-Id: I7d07c57b7276815c72d08acaa86f673e43eb0498
2016-03-07Merge "Make AllNodesExtraConfig depend on the validation deployments"Jenkins1-1/+7
2016-03-07Merge "Set /64 cidr_netmask for pcmk VIPs when IPv6"Jenkins1-6/+42
2016-03-07Merge "Fix rabbit_hosts list for glance-api for IPv6"Jenkins3-8/+3
2016-03-07Merge "Allow to enable IPv6 on Corosync"Jenkins4-2/+22
2016-03-07Merge "Use MysqlVirtualIPUri for nova_api and sahara database"Jenkins1-2/+2
2016-03-07Merge "Make the Neutron subnet ipv6_{ra,address}_mode configurable"Jenkins5-10/+50
2016-03-07Merge "Revert "Deploy Aodh services, replacing Ceilometer Alarm""Jenkins12-309/+3
2016-03-07Merge "Function library for major upgrades"Jenkins2-0/+16
2016-03-07Merge "Add IPv6 versions of the Controller NIC configs"Jenkins10-13/+565
2016-03-07Merge "Fixup swift device string to delimit the ipv6 address with []"Jenkins2-3/+3
2016-03-07Merge "Introduce a UpgradeScriptDeliveryWorfklow as part of tripleo upgrades"Jenkins4-25/+114
2016-03-07Fixup the memcached servers string in nova.conf for v6marios2-1/+16
As discussed at https://bugzilla.redhat.com/show_bug.cgi?id=1299265 when providing a list of IPv6 addresses as the memcache_node_ips the resulting nova.conf entry can't be parsed properly. This adds a memcache_node_ips_v6 which has the required format like inet6:[ADDR1],inet6:[ADDR2],inet6:[ADDR3] Closes-Bug: 1536103 Change-Id: I7f95fa063cbba279c4c2e270841f0a279d2be2f6
2016-03-07Fixup swift device string to delimit the ipv6 address with []marios2-3/+3
The swift device string is formatted in the outputs of the controller template and swift-storage templates. For ipv6 we need to delimit the address with [] as discussed in https://bugzilla.redhat.com/show_bug.cgi?id=1296701#c0 Change-Id: Ie611d62c3668a65a7be52777a613d265682c6a8b Co-Authored-By: Jiri Stransky <jistr@redhat.com> Closes-Bug: 1534135
2016-03-06Add an environment to use a swap partitionJames Slagle1-0/+90
This environment can be used with AllNodesExtraConfig to enable swap on a device with the given label as specified by the swap_partition_label parameter. If Ironic is used to create the swap partition, the partition will have a label of swap1, so that's a reasonable default for the parameter. The partition is also written to /etc/fstab as a swap mount so that it will be enabled on reboot. Change-Id: I5cd68c13dbfe53eecf6c6ad93151eadc980a902d
2016-03-04Revert "Deploy Aodh services, replacing Ceilometer Alarm"James Slagle12-309/+3
This just a revert to see if reverting this gets back to a normal CI run time. This reverts commit f72aed85594f223b6f888e6d0af3c880ea581a66. Change-Id: I04a0893f6cf69f547a4db26261005e580e1fc90b
2016-03-05Set /64 cidr_netmask for pcmk VIPs when IPv6Emilien Macchi1-6/+42
We'll use /32 for IPv4, the default pacemaker was already using. Change-Id: Iab584c3e50efc3ecc0ec87bb080bf2d5d802199d Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
2016-03-05Allow to enable IPv6 on CorosyncEmilien Macchi4-2/+22
To enable IPv6 in Corosync, you'll need to set the --ipv6 parameter when building the cluster. To do so, we need to specify this parameter in puppet configuration when running ::pacemaker::corosync class. So we have now a new parameter: CorosyncIPv6 which is a boolean, False by default. If set to True, it will pass right options to enable IPv6 when building the Pacemaker cluster. Change-Id: I485f1399964ddd7a201ed19ec6580b8a136b3acd
2016-03-05Make the Neutron subnet ipv6_{ra,address}_mode configurableGiulio Fidente5-10/+50
Use of slaac does not permit stati assignment of IPs to a Neutron port, so we default to dhcpv6-stateful instead. Change-Id: Id7f104be60ae05785a3d0a33516d7875a4698ed1
2016-03-05Add IPv6 versions of the Controller NIC configsDan Sneddon10-13/+565
This change adds Controller NIC configs for the sample NIC config templates that are compatible with IPv6 on the External network. These controller-v6.yaml templates include a default route for IPv6 on the External network, and a default route for IPv4 on the Control Plane. The Heat parameters ExternalNetworkDefaultRoute and ControlPlaneDefaultRoute are used to set these values. Change-Id: Ifed8cb359eae1d9d623d3eb2fe40ea8a0d1d889a
2016-03-05Merge "Add IPv6 Support to Isolated Networks"Jenkins39-30/+1009
2016-03-05Fix rabbit_hosts list for glance-api for IPv6Giulio Fidente3-8/+3
Previously we were always appending the :port suffix to the list of rabbitmq nodes but the syntax was invalid for IPv6. This change wires rabbit_hosts from the templates as it happens already for the other services. Port can be customized using rabbit_port. Change-Id: Iecc7a97d46d7de17e85398c57996c104c9125b0e
2016-03-05Use MysqlVirtualIPUri for nova_api and sahara databaseGiulio Fidente1-2/+2
Without this the nova_api and sahara database_connection string won't add brackets around the IP address, when IPv6, causing db sync to fail. Change-Id: I262e5de993ae59ad665edb043119aac2e09c6fdc
2016-03-04Make AllNodesExtraConfig depend on the validation deploymentsJames Slagle1-1/+7
AllNodesExtraConfig should really only run after the validation deployments are done, which validate that basic networking is functioning. In particular, creating a swap file during AllNodesExtraConfig while the validation deployments are still running might cause temporary network outages which could fail the validations. Change-Id: Ia2a10318de47854a9b8932d72243ce0a85603556 Partial-Bug: #1553243
2016-03-04Parameterize the heat-docker-agents imageRyan Hallisey1-0/+1
Heat docker agents needs to be parameterized so that we can change the tag from the environment file. Change-Id: I352fd0fdf982056de23285e366efe55ca3aaff1b Co-authored-by: Jeff Peeler <jpeeler@redhat.com>
2016-03-04Merge "Allow for usage of pre-allocated IPs for the management network"Jenkins4-0/+54
2016-03-04Merge "Run keystone-manage bootstrap for HA deployment too"Jenkins1-3/+1
2016-03-04Run keystone-manage bootstrap for HA deployment tooJiri Stransky1-3/+1
This is necessary to keep creating the Default domain. Change-Id: Ib9911819e89f30270d4f7597639b33f30ad2e3a6 Closes-Bug: #1549867
2016-03-04Merge "Set notification driver for nova to send"Jenkins1-1/+1
2016-03-04Add IPv6 Support to Isolated NetworksDan Sneddon39-30/+1009
This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-04Allow for usage of pre-allocated IPs for the management networkSteven Hardy4-0/+54
Id3d4f12235501ae77200430a2dc022f378dce336 added support for pre-allocated IPs on the other overlay networks, but because the patch adding the managment network (I0813a13f60a4f797be04b34258a2cffa9ea7e84f) was under review around the same time, we missed adding the from_pool capability to the ManagementNetwork. Change-Id: If99f37634d5da7e7fb7cfc31232e926bd5ff074a
2016-03-03Merge "Deploy Aodh services, replacing Ceilometer Alarm"Jenkins12-3/+309
2016-03-03Updated the heat_template_versionrajinir2-2/+2
Fixed the heat_template_version of these YAML files to the liberty release version according to HOT template specs. Change-Id: Ic5e0d843f7e164c59fb1737e52ef4cf6ad4df77f
2016-03-03Deploy Aodh services, replacing Ceilometer AlarmEmilien Macchi12-3/+309
Ceilometer Alarm is deprecated in Liberty by Aodh. This patch: * manage Aodh Keystone resources * deploy Aodh API under WSGI, Notifier, Listener and Evaluator * manage new parameters to customize Aodh deployment * uses ceilometer DB for the upgrade path * pacemaker config Depends-On: I9e34485285829884d9c954b804e3bdd5d6e31635 Depends-On: I891985da9248a88c6ce2df1dd186881f582605ee Depends-On: Ied8ba5985f43a5c5b3be5b35a091aef6ed86572f Co-Authored-By: Pradeep Kilambi <pkilambi@redhat.com> Change-Id: I58d419173e80d2462accf7324c987c71420fd5f6
2016-03-03Merge "endpoint_map: bump nova api from 2.0 to 2.1"Jenkins2-6/+6
2016-03-03Merge "Use set -e for validation-scripts/all-nodes.sh"Jenkins1-0/+5
2016-03-03Function library for major upgradesJiri Stransky2-0/+16
This commit introduces a bash file to be sourced into major upgrade scripts. Into this file we can put specific pieces of migration logic in the form of bash functions, which can then be called from the upgrade scripts. Change-Id: Ibf7aa84d3880e9218c488dec9d707300e1784744
2016-03-03Merge "Moves the swift start/stop into the common_functions.sh file"Jenkins3-10/+11
2016-03-03Merge "Add Satellite 5 support"Jenkins2-7/+36
2016-03-03Introduce a UpgradeScriptDeliveryWorfklow as part of tripleo upgradesmarios4-25/+114
This splits the upgrade script delivery out of the UpgradeWorkflow and into a new task which delivers the upgrade script for compute and object-storage nodes. This is intended to be the first part of the upgrades process, since we need to upgrade swift nodes before the controllers and then only one at a time. So this will deliver the upgrade script which can be invoked by the operator using the existing script in tripleo-common 'upgrade-non-controller.sh'. This can be invoked by passing the -e environments/major-upgrade-script-delivery.yaml (added here) to the openstack overcloud deploy command. Change-Id: I20a0d4978e907111404f8108c502ab53b69a3296
2016-03-03Upgrade of Cinder block storage nodesJiri Stransky2-1/+23
This introduces upgrades for Cinder block storage nodes. Currently Cinder doesn't support upgrade level pinning and cannot safely deal with version skew. This means that we have to upgrade Cinder storage nodes in sync with controller nodes (after they were taken down for upgrade, before they are brought back up) to ensure that Cinder services perform AMQP communication only within the same major version of Cinder. According to our current knowledge, Cinder block storage nodes are the only node type that will have to be upgraded in sync with controllers. Change-Id: Icec913c015eff744b0f31b513176b4b657df43af
2016-03-03Merge "Cisco nexus config template - obsolete parameter (replay count)."Jenkins1-2/+9
2016-03-02Moves the swift start/stop into the common_functions.sh filemarios3-10/+11
Since swift isn't managed by pacemaker we need to manually (systemctl) stop and start the swift services. This moves the duplicate blocks for start/stop into a common function (we already include that pacemaker_common_functions.sh here so may as well) Change-Id: Ic4f23212594c1bf9edc39143bf60c7f6d648fd1d
2016-03-02Merge "Upgrades: install zaqarclient"Jenkins2-0/+3
2016-03-02Merge "Upgrades: quiet yum update"Jenkins1-1/+1
2016-03-02Merge "Support adding a swap file to overcloud nodes"Jenkins1-0/+108
2016-03-02Upgrades: install zaqarclientJiri Stransky2-0/+3
Old overcloud images don't have python-zaqarclient installed, and new overclouds' os-collect-config are configured with Zaqar support. This together means that on upgrade we need to install python-zaqarclient, otherwise os-collect-config will be restarted during yum update and crash due to trying to import missing Python module from zaqarclient. Change-Id: I3e875e14cb60b1b78aec0d9ddc412ccf865abd01
2016-03-02Upgrades: quiet yum updateJiri Stransky1-1/+1
Quiet down yum during major upgrades to reduce the output size. This is consistent with what was introduced into minor updates in change I517271e8465885421a78b73c5af756816c37a977. Change-Id: Ie6b470e383fdf42870ac6f60ca43e44b4c446ebe
2016-03-02Merge "Use service tenant for ceilometer"Jenkins1-3/+1