aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-05-26Map Glance services to isolated networksDan Sneddon2-3/+5
This change adds parameters to specify which networks the Glance services will use. If the internal_api network exists, Glance Registry will bind to the IP on that network, otherwise it will default to the Undercloud 'ctlplane' network. If the storage network exists, Glance API will bind to the IP on that network, otherwise it will default to 'ctlplane'. The networks that these services use can be overridden with an environment file. Change-Id: I6114b2d898c5a0ba4cdb26a3da2dbf669666ba99
2015-05-26Map Cinder services to isolated networksDan Sneddon2-2/+4
This change adds parameters to specify which networks the Cinder API and Cinder iSCSI services will listen on. If the internal_api network exists, Cinder API will be bound to the IP on that network, otherwise it will default to the Undercloud 'ctlplane' network. The Cinder iSCSI service will bind to the storage network if it exists, otherwise will also default to using the Undercloud 'ctlplane' network. Change-Id: I98149f108baf28d46eb199b69a72d0f6914486fd
2015-05-26Map Ceilometer services to isolated networksDan Sneddon2-2/+4
This change adds the parameters to specify which networks the Ceilometer and MongoDB servers listen on. It is set to the internal_api network if present, and reverts to the default Undercloud 'ctlplane' network if not. Change-Id: Ib646e4a34496966f9b1d454f04d07bf95543517f
2015-05-26An environment file to enable network isolationDan Prince1-0/+35
This commit adds an environment file which adds all the relevant resource registry entries to enable isolated overcloud networks. Change-Id: I8c5e0ca300b86a38925f59c9df7831d69da9f787
2015-05-26Switch net-config templates to use OS::stack_idDan Prince13-22/+19
This patch removes the custom config_id outputs and replaces it with OS::stack_id which allows us to just call get_resource in the parent stack. The motivation for this change is we'll be adding more os-net-config templates and it would be nice to take advantage of this newer template feature. Change-Id: I6fcb26024b94420779b86766e16d8a24210c4f8e
2015-05-26Update neutron local_ip to use the tenant networkDan Prince3-2/+32
This patch uses the new NetIpMap and ServiceMap abstractions to assign the Neutron tenant tunneling network addresses. By default this is associated with the tenant network. If no tenant network is activated this will still default to the control plane IP address. Change-Id: I9db7dd0c282af4e5f24947f31da2b89f231e6ae4
2015-05-26Add a network ports IP mapping resourceDan Prince3-0/+34
This patch adds a resource which constructs a Json output parameter called net_ip_map which will allow us to easily extract arbitrary IP addresses for each network using the get_attr function in heat. The goal is to use this data construct in each role template to obtain the correct IP address on each network. Change-Id: I1a8c382651f8096f606ad38f78bbd76314fbae5f
2015-05-26Add isolated network ports to block storage rolesDan Prince4-0/+66
This patch updates the cinder block storage roles so that they can optionally make use of isolated network ports on the storage, storage management, and internal_api networks. -Multiple networks are created based upon settings in the heat resource registry. These nets will either use the noop network (the control plane pass-thru default) or create a custom Neutron port on each of the configured networks. -The ipaddress/subnet of each network is passed passed into the NetworkConfig resource which drives os-net-config. This allows the deployer to define a custom network template for static IPs, etc on each of the networks. -The ipaddress is exposed as an output parameter. By exposing the individual addresses as outputs we allow Heat to construct collections of ports for various services. Change-Id: I4e18cd4763455f815a8f8b82c93a598c99cc3842
2015-05-26Add isolated network ports to swift rolesDan Prince4-0/+66
This patch updates the swift roles so that they can optionally make use of isolated network ports on the storage, storage management, and internal API networks. -Multiple networks are created based upon settings in the heat resource registry. These nets will either use the noop network (the control plane pass-thru default) or create a custom Neutron port on each of the configured networks. -The ipaddress/subnet of each network is passed passed into the NetworkConfig resource which drives os-net-config. This allows the deployer to define a custom network template for static IPs, etc on each of the networks. -The ipaddress is exposed as an output parameter. By exposing the individual addresses as outputs we allow Heat to construct collections of ports for various services. Change-Id: I9984404331705f6ce569fb54a38b2838a8142faa
2015-05-26Add isolated network ports to ceph rolesDan Prince4-0/+46
This patch updates the ceph roles so that they can optionally make use of isolated network ports on the storage and storage management networks. -Multiple networks are created based upon settings in the heat resource registry. These nets will either use the noop network (the control plane pass-thru default) or create a custom Neutron port on each of the configured networks. -The ipaddress/subnet of each network is passed passed into the NetworkConfig resource which drives os-net-config. This allows the deployer to define a custom network template for static IPs, etc on each of the networks. -The ipaddress is exposed as an output parameter. By exposing the individual addresses as outputs we allow Heat to construct collections of ports for various services. Change-Id: I35cb8e7812202f8a7bc0379067bf33d483cd2aec
2015-05-26Add isolated network ports to compute rolesDan Prince4-0/+66
This patch updates the compute roles so that they can optionally make use of isolated network ports on the tenant, storage, and internal_api networks. -Multiple networks are created based upon settings in the heat resource registry. These nets will either use the noop network (the control plane pass-thru default) or create a custom Neutron port on each of the configured networks. -The ipaddress/subnet of each network is passed passed into the NetworkConfig resource which drives os-net-config. This allows the deployer to define a custom network template for static IPs, etc on each of the networks. -The ipaddress is exposed as an output parameter. By exposing the individual addresses as outputs we allow Heat to construct collections of ports for various services. Change-Id: Ib07b4b7256ede7fb47ecc4eb5abe64b9144b9aa1
2015-05-26Add isolated network ports to controller rolesDan Prince4-0/+106
This patch updates the controller roles so that they can optionally make use of isolated network ports on each of 5 available overcloud networks. -Multiple networks are created based upon settings in the heat resource registry. These nets will either use the noop network (the control plane pass-thru default) or create a custom Neutron port on each of the configured networks. -The ipaddress/subnet of each network is passed passed into the NetworkConfig resource which drives os-net-config. This allows the deployer to define a custom network template for static IPs, etc on each of the networks. -The ipaddress is exposed as an output parameter. By exposing the individual addresses as outputs we allow Heat to construct collections of ports for various services. Change-Id: I9bbd6c8f5b9697ab605bcdb5f84280bed74a8d66
2015-05-26Add isolated net parameters to net-config stacksDan Prince3-0/+66
This patch adds parameters so that we can pass in the ipaddress/subnet for each of the isolated overcloud traffic nets to os-net-config templates. This interface change will allow deployers to plug in a custom version of an os-net-config template that drives isolated network configuration. Change-Id: I35bbe9a0bd81e79f9bfd531fe89c700af8b354c4
2015-05-26Add a ports (ip address) abstraction layerDan Prince6-0/+207
This patch adds a set of templates to create ports on isolated networks via Heat. There are 5 port templates in total which are split out according to the available overcloud networks. Change-Id: I5175ef48c1960ea0d13fc8518328db53921c70cd
2015-05-26Merge "Wire in optional network creation for overcloud"Jenkins3-0/+29
2015-05-22Wire in optional network creation for overcloudDan Prince3-0/+29
This patch enables uses to selectively enable the creation of split out networks for the overcloud traffic. These networks will be created on the undercloud's neutron instance. By default a noop network is used so that no extra networks are created. This allows our default to continue being all traffic on the control plane. Change-Id: Ied49d9458c2d94e9d8e7d760d5b2d971c7c7ed2d
2015-05-22Merge "Firstboot rsync for development purposes"Jenkins1-0/+49
2015-05-22Merge "Add Glance as Pacemaker resource"Jenkins2-5/+30
2015-05-22Merge "Add Cinder services as Pacemaker resources"Jenkins1-7/+51
2015-05-21Align puppet Controller post-deploy Deployment namesSteven Hardy1-11/+11
Align all Deployment resource so we can use a glob convention for stepped deployments via heat hooks/breakpoints. Since most resources already use a FooDeployment_StepN convention, align those which deviate from this as a precursor to supporting stepped deployment, e.g stepping through "*Deployment_Step*". Change-Id: I6bfee04649aa36116d1141ebe06d08b310ec8939
2015-05-21Merge "Overcloud: bump HOT version to 2015-04-30"Jenkins41-41/+41
2015-05-21Add Glance as Pacemaker resourceGiulio Fidente2-5/+30
Change-Id: If87cc4d55e8524246d2cd41a62805f84780006b2
2015-05-21Add Cinder services as Pacemaker resourcesJiri Stransky1-7/+51
Add Pacemaker resources for Cinder services, also add relevant ordering and colocation constraints. Change-Id: Idc2e1b5ec96d882543f7a1a4ec723a010020ab02
2015-05-21Merge "Start non-pacemakerized services in step 4"Jenkins1-4/+1
2015-05-21Merge "Use clustercheck script to control galera-ready"Jenkins4-27/+9
2015-05-21Start non-pacemakerized services in step 4Jiri Stransky1-4/+1
Previously we've been starting non-pacemakerized services in step 3 on bootstrap node and in step 4 on others. Now that $sync_db in OpenStack Puppet modules is decoupled from $enabled and $manage_service [1] we can start the services in step 4 on all nodes. [1] https://bugs.launchpad.net/puppet-glance/+bug/1452278 Change-Id: I6351d972ab00f4661d98338d95310d33f271de2f
2015-05-21Merge "Prepare for adding OpenStack services to Pacemaker"Jenkins1-24/+124
2015-05-20Overcloud: bump HOT version to 2015-04-30Dan Prince41-41/+41
This patch bumps the HOT version for the overcloud to Kilo 2015-04-30. We should have already done this since we are making use of OS::stack_id (a kilo feature) in some of the nested stacks. Also, this will give us access to the new repeat function as well. Change-Id: Ic534e5aeb03bd53296dc4d98c2ac5971464d7fe4
2015-05-20Merge "Move sysctl settings into hieradata"Jenkins8-4/+20
2015-05-20Merge "Set up corosync using hostnames rather than IPs"Jenkins1-1/+1
2015-05-20Move sysctl settings into hieradataGiulio Fidente8-4/+20
This will configure the sysctl settings via puppet instead of sysctl image element. Change-Id: Ieb129d4cbe4b6d4184172631499ecd638073564f
2015-05-20Merge "Clone params for pacemaker rabbitmq resource"Jenkins1-1/+1
2015-05-20Merge "Provide RabbitMQ clients with a list of servers instead of VIP"Jenkins6-30/+18
2015-05-20Use clustercheck script to control galera-readyGiulio Fidente4-27/+9
The exec timeout/attempts is configured so that it is left running for up to 30mins if the command runs but is unsuccessfull and up to 2h if the command times out. Change-Id: I4b6b77e878017bf92d7c59c868d393e74405a355
2015-05-20Prepare for adding OpenStack services to PacemakerJiri Stransky1-24/+124
We need to write config for OpenStack services on all nodes in step 3 so that we can then create pacemaker resources in step 4. (If we wrote config on non-bootstrap nodes in step 4 as it is currently, services on those nodes might be started unconfigured. This is an inter-node ordering issue that cannot be easily solved from within Puppet manifests, hence the use of steps to enforce this ordering.) Change-Id: Ia78ec38520bd1295872ea2690e8d3f8d6b01c46c
2015-05-20Merge "Consolidate use of $pacemaker_master in step 2"Jenkins1-49/+31
2015-05-20Merge "Enable VIPs via Pacemaker from step 2 instead of step 1"Jenkins1-14/+8
2015-05-20Merge "Move NTP and Memacache respectively into step 1 and step 2"Jenkins1-5/+7
2015-05-20Merge "Ensure sync_db is consumed by Keystone and Cinder classes"Jenkins1-2/+6
2015-05-19Merge "Remove unused enable_pacemaker setting from templates"Jenkins1-2/+0
2015-05-19Merge "Configure HAProxy, Galera and MongoDB before start"Jenkins1-61/+66
2015-05-19Merge "Update to reflect puppet-pacemaker changes"Jenkins1-14/+28
2015-05-19Merge "Fix RabbitMQ startup race"Jenkins1-16/+22
2015-05-19Clone params for pacemaker rabbitmq resourceJiri Stransky1-1/+1
Set clone params according to [1]. [1] https://github.com/beekhof/osp-ha-deploy/blob/f8a65ab4c34f94737edde7db60337b830bfe6311/pcmk/rabbitmq.scenario Change-Id: I5644de2d6253ab762a1420560ecb5bee2fd83092 Co-Authored-By: Giulio Fidente <gfidente@redhat.com>
2015-05-19Provide RabbitMQ clients with a list of servers instead of VIPGiulio Fidente6-30/+18
This will change the way how RabbitMQ clients get to the servers, they will not go through HAProxy anymore. Change-Id: I522d7520b383a280505e0e7c8fecba9ac02d2c9b
2015-05-19Consolidate use of $pacemaker_master in step 2Giulio Fidente1-49/+31
Aims at having the Pacemaker resources configuration happening in a single if condition. Change-Id: I497538510f80a356e876d476024671b787b77fc9
2015-05-19Enable VIPs via Pacemaker from step 2 instead of step 1Giulio Fidente1-14/+8
Change-Id: I724c341f148fedf725f3b3da778e491741b754ae
2015-05-19Merge "Environment which configures puppet pacemaker."Jenkins1-0/+4
2015-05-19Merge "Add a directory for overcloud heat environments"Jenkins2-0/+29
2015-05-18Move NTP and Memacache respectively into step 1 and step 2Giulio Fidente1-5/+7
NTP synchronization is moved to to step 1 where initial Pacemaker configuration is performed. Memacached is moved to step 2 to make sure it is up before the OpenStack services are started. Change-Id: I84121a687ee5ddb522239ecefd4d1d76c2f910b5