aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-05-05Mount hostpath logs on /var/logFlavio Percoco37-60/+501
Some containers are using the logs named volume for collecting logs written to `/var/log`. We should make this consistent for all the containers. This patch also cleans up some mounts that weren't needed for some services. For example, glance-api doesn't need `/run` to be mounted. Other changes: * Rework log volumes to hostpath mounts to omit slow COW writes. * Add kolla_config's permission and host_prep_tasks create and manage hostpath mounted log dirs permissions. * Rework data owning init containers to kolla_config permissions * When a step wants KOLLA_BOOTSTRAP or DB sync, use logs data owning init containers to set permissions for logs. This is required because kolla bootsrap and DB sync runs before the kolla config stage and there is yet permissions set for logs. * In order to address hybrid cases for host services vs containerized ones to access logs having different UIDs, persist containerized services' logs into separate directories (an upgrade impact) * Ensure host prep tasks to create /var/log/containers/ and /var/lib/ sub-directories for services * Fix missing /etc/httpd, /var/www config-data mounts for zaqar/ironic * Fix YAML indentation and drop strings quotation. Co-authored-by: Bogdan Dobrelya <bdobreli@redhat.com> Partial blueprint containerized-services-logs Change-Id: I53e737120bf0121bd28667f355b6f29f1b2a6b82
2017-05-05Merge "Add StackUpdateType to set hiera on upgrade"Jenkins6-1/+24
2017-05-04Merge "[N->O] Add openstack-nova-migration to compute nodes."Jenkins2-0/+4
2017-05-04Merge "Restrict nova migration ssh tunnel"Jenkins2-0/+6
2017-05-04Merge "Disable Telemetry services on undercloud containers"Jenkins5-8/+27
2017-05-04Merge "Configure snmpd auth params in ceilometer profile"Jenkins1-0/+10
2017-05-04Merge "Use httpd in Heat docker services"Jenkins2-16/+22
2017-05-04Add StackUpdateType to set hiera on upgradeSteven Hardy6-1/+24
This will enable those consuming the stack_update_type hieradata set by this parameter to differentiate an update from a major upgrade Change-Id: I38469f4b7d04165ea5371aeb0cbd2e9349d70c79
2017-05-04Merge "Internal TLS: Use specific CA file for mysql-client"Jenkins1-0/+6
2017-05-04Fix up pacemaker_status test in yum_update.shMichele Baldessari1-2/+2
In change I2aae4e2fdfec526c835f8967b54e1db3757bca17 we did the following: -pacemaker_status=$(systemctl is-active pacemaker || :) +pacemaker_status="" +if hiera -c /etc/puppet/hiera.yaml service_names | grep -q pacemaker; then + pacemaker_status=$(systemctl is-active pacemaker) +fi we did that so due to LP#1668266: we did not want systemctl is-active to fail on non pacemaker nodes. The problem with the above hiera check is that it will match on pacemaker_remote nodes as well. We cannot piggyback the pacemaker_enabled hiera key because that is true on all nodes. So let's make the test check only for pacemaker service without matching pacemaker remote. Tested with: 1) Test on a controller node with pacemaker service enabled [root@overcloud-controller-0 ~]# hiera -c /etc/puppet/hiera.yaml -a service_names |grep '\bpacemaker\b' "pacemaker", [root@overcloud-controller-0 ~]# echo $? 0 2) Test on a compute node without pacemaker: [root@overcloud-novacompute-0 puppet]# hiera -c /etc/puppet/hiera.yaml service_names |grep '\bpacemaker\b' [root@overcloud-novacompute-0 puppet]# echo $? 1 3) Test on a node with pacemaker_remote in the service_names key: [root@overcloud-novacompute-0 puppet]# hiera -c /etc/puppet/hiera.yaml service_names |grep '\bpacemaker\b' [root@overcloud-novacompute-0 puppet]# echo $? 1 [root@overcloud-novacompute-0 puppet]# hiera -c /etc/puppet/hiera.yaml service_names |grep '\bpacemaker_remote\b' "pacemaker_remote"] [root@overcloud-novacompute-0 puppet]# echo $? 0 Change-Id: I54c5756ba6dea791aef89a79bc0b538ba02ae48a Closes-Bug: #1688214
2017-05-04Merge "Initial VIP ipv6 minor update code"Jenkins2-5/+74
2017-05-04Merge "Internal TLS: use common CA file parameter for libvirt CA cert"Jenkins1-5/+20
2017-05-03Merge "Add back Heat conditions in upgrade workflow"Jenkins1-28/+50
2017-05-03Merge "snmp: add SnmpdBindHost parameter"Jenkins2-0/+12
2017-05-03Merge "Set reasonable TTL defaults for Ceilometer DB"Jenkins1-1/+12
2017-05-03Merge "Expose metric delay processing metric"Jenkins2-0/+8
2017-05-03[N->O] Add openstack-nova-migration to compute nodes.Sofer Athlan-Guyot2-0/+4
This add openstack-nova-migration on the compute during the upgrade. Closes-Bug: #1687081 Depends-on: Iab022bdfb655e3c52fecebf416e75c9e981072ab Depends-on: I02dc8934521340f42ac44a7d16889f6d79620c33 Change-Id: I3db2a3188e538eeaef61769d38f0166545444cfe
2017-05-03Restrict nova migration ssh tunnelOliver Walsh2-0/+6
Specify the allowed networks for migration ssh tunneling. bp tripleo-cold-migration Change-Id: Iab022bdfb655e3c52fecebf416e75c9e981072ab Depends-on: Idb56acd1e1ecb5a5fd4d942969be428cc9cbe293
2017-05-03Merge "Add parameter Ec2ApiExternalNetwork for VPCs"Jenkins1-0/+15
2017-05-03Add back Heat conditions in upgrade workflowGiulio Fidente1-28/+50
By adding back the conditions we avoid the deployment of unneded software configs on nodes where we don't have any upgrade task to run, speeding up the upgrade process. Related-Bug: #1679486 Related-Bug: #1678101 Change-Id: I5c8b0c4abfc0607f42fd3f2da9f5ef2702b1bbe1
2017-05-03Configure snmpd auth params in ceilometer profilePradeep Kilambi1-0/+10
Depends-On: I55ac06e1a561d29d7e1c928a1684989c9654b95d Change-Id: Id29e96979b937593efe244f46ce2dd74df3aaa7f
2017-05-03Set reasonable TTL defaults for Ceilometer DBPradeep Kilambi1-1/+12
By deafult, we let the data live for ever. Which isnt very efficient. Lets expose params to tweak this and use a reasonable default. Change-Id: I145fa73a7af9cb4135ba910d3659853b3baa893d
2017-05-03Expose metric delay processing metricPradeep Kilambi2-0/+8
For performance reasons we might want to tweak this param lets expose this via tripleo. The puppet changes were added in this patch I5de5283d1b14e0bba63d6d9a440611914ba86ca4 Change-Id: I72f1fe3a47060fe37602a70b8a74fba72209127c
2017-05-03Merge "Internal TLS: Use specific CA file for haproxy"Jenkins2-0/+12
2017-05-03Internal TLS: Use specific CA file for mysql-clientJuan Antonio Osorio Robles1-0/+6
Instead of using the CA bundle, this sets the mysql client configuration file to use a specific file for validating the certificate of the database server. This helps in two ways: * Improves performance since validation will check only one certificate. * Improves security since we're only the certificates signed by one CA are valid, instead of any certificate that the system trusts (which could include potentially compromised public certs). Change-Id: I46f7cb6da73715f8f331337e0161418450d5afd7 Depends-On: I75bdaf71d88d169e64687a180cb13c1f63418a0f
2017-05-03Use httpd in Heat docker servicesThomas Herve2-16/+22
This switches heat-api and heat-api-cfn to use httpd in containerized overcloud. Co-Authored-By: Martin André <m.andre@redhat.com> Change-Id: I2fe6e25474279c7c91a69d9df7b28e12b1d8ac00
2017-05-03Merge "Move containers common volumes from yaql to list_concat"Jenkins35-593/+477
2017-05-03Internal TLS: use common CA file parameter for libvirt CA certJuan Antonio Osorio Robles1-5/+20
libvirt has its own parameter for setting the CA, however, if we have a common CA for all services in the internal network (which we do), it's more consistent to use the common parameter for configuring that CA file. The previous parameter was left in case the deployer wants to use a specific CA file for the compute nodes. Change-Id: I3d132d3d257d7ea9f43e49593f8509c3cd205ca5
2017-05-03Internal TLS: Use specific CA file for haproxyJuan Antonio Osorio Robles2-0/+12
Instead of using the CA bundle, this sets HAProxy to use a specific file for validating the certificates of the services it's proxying. This helps in two ways: * Improves performance since validation will check only one certificate. * Improves security since we're only the certificates signed by one CA are valid, instead of any certificate that the system trusts (which could include potentially compromised public certs). Change-Id: Id6de045b3c93c82d37e0b0657c17a3108516016a
2017-05-03Disable ComputeNeutron* for cisco-nexus-ucsmSteven Hardy1-0/+2
It seems this wasn't adjusted when https://review.openstack.org/#/c/338315/ landed, which added interfaces for compute specific neutron configuration, which is disabled for most vendor backends. Change-Id: I4c98008107568b3b65decd7640e25c7d2b1ea9ff Related-Bug: #1687597
2017-05-02Add deprecation notes for panko servicePradeep Kilambi3-2/+11
Change-Id: Ic218a753e0cede2ba3951bcaec843f487dce0c71
2017-05-02Merge "Ensure AllNodesExtraConfig runs before AllNodesDeploySteps"Jenkins1-0/+1
2017-05-02Merge "Fix for the resource ControllerPostPuppetMaintenanceModeDeployment"Jenkins4-11/+16
2017-05-02Merge "Deprecate ceilometer collector"Jenkins8-37/+89
2017-05-02Initial VIP ipv6 minor update codeMichele Baldessari2-5/+74
To test this change we deployed a stock master with ipv6 which created a bunch of ipv6 with /64 netmask: [root@overcloud-controller-0 ~]# pcs resource show ip-fd00.fd00.fd00.2000..18 Resource: ip-fd00.fd00.fd00.2000..18 (class=ocf provider=heartbeat type=IPaddr2) Attributes: ip=fd00:fd00:fd00:2000::18 cidr_netmask=64 Operations: start interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-start-interval-0s) stop interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-stop-interval-0s) monitor interval=10s timeout=20s (ip-fd00.fd00.fd00.2000..18-monitor-interval-10s) Then we update the THT folder with this patch and upload the new scripts on the undercloud via: openstack overcloud deploy --update-plan-only .... Then we kick off the minor update workflow: openstack overcloud update stack -i overcloud Once the controller-0 node (bootstrap node for pacemaker) is completed we have the correct VIP configuration: [root@overcloud-controller-0 heat-config-script]# pcs resource show ip-fd00.fd00.fd00.2000..18 Resource: ip-fd00.fd00.fd00.2000..18 (class=ocf provider=heartbeat type=IPaddr2) Attributes: ip=fd00:fd00:fd00:2000::18 cidr_netmask=128 nic=vlan20 lvs_ipv6_addrlabel=true lvs_ipv6_addrlabel_value=99 Operations: start interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-start-interval-0s) stop interval=0s timeout=20s (ip-fd00.fd00.fd00.2000..18-stop-interval-0s) monitor interval=10s timeout=20s (ip-fd00.fd00.fd00.2000..18-monitor-interval-10s) Also verified that running the script a second time does not alter the (already fixed) VIPs. Co-Authored-By: Damien Ciabrini <dciabrin@redhat.com> Change-Id: I765cd5c9b57134dff61f67ce726bf88af90f8090
2017-05-02Merge "Use list_concat for metadata_settings for haproxy"Jenkins1-6/+4
2017-05-02snmp: add SnmpdBindHost parameterEmilien Macchi2-0/+12
SnmpdBindHost will be useful for users who want to change the binding options for SNMP daemon. It has to be an array, and by the default the value is ['udp:161','udp6:[::1]:161'] like it was in puppet-tripleo profile. Change-Id: Iccf0a8d35cc05d34272c078c97a5dddfb8e7d614 Closes-Bug: #1687628
2017-05-02Ensure AllNodesExtraConfig runs before AllNodesDeployStepsSteven Hardy1-0/+1
When implementing custom roles, we lost an implicit dependency that ensured AllNodesExtraConfig is applied before AllNodesDeploySteps, which causes problems if you need to write hieradata via the AllNodesExtraConfig hook (some cisco integrations we have in tree do this, and are now broken because the ordering is no longer ensured. Change-Id: Ie78ecbb4e135ab7f196867ef9d8d271049a9cd10 Closes-Bug: #1687597
2017-05-02Merge "Allow to deploy Octavia API & Neutron Server on 2 different nodes"Jenkins2-1/+7
2017-05-02Fix for the resource ControllerPostPuppetMaintenanceModeDeploymentCarlos Camacho4-11/+16
Closes-Bug:1686619 Change-Id: I7c32ca39a456de9833d30c31d41fcb727d2b0a34
2017-05-02Merge "Remove deprecated minor update pcs code"Jenkins1-18/+0
2017-05-02Add parameter Ec2ApiExternalNetwork for VPCsSven Anderson1-0/+15
Change-Id: I26652afe0f513ec354c05570e7fa0e5b4b0ab669
2017-05-02Move containers common volumes from yaql to list_concatJuan Antonio Osorio Robles35-593/+477
list_concat was introduced recently and is able to replace the yaql calls for concatenating lists. Change-Id: Id3a80a0e1e4c25b6d838898757c69ec99d0cd826
2017-05-02Use list_concat for metadata_settings for haproxyJuan Antonio Osorio Robles1-6/+4
Change-Id: Ia0e0a12e1863dce657d4e1c7f9894ea5bfd008be
2017-05-02Improve logging for docker-puppet.pyBogdan Dobrelya1-36/+50
Log prepared docker command Use logger stdout instead of print command Log stderr as debug as well Change-Id: I3d48fbf4fa3381d325e3be3788b041e06d4bb294 Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com>
2017-05-01Disable Telemetry services on undercloud containersPradeep Kilambi5-8/+27
We dont deploy telemetry by default on undercloud anymore. Lets disable by default and provide an env file to enable on demand. Change-Id: I03807b3b75bb038c2d2bb342f3327e6eca2f3976
2017-05-01Merge "Validate NTP servers"Jenkins2-0/+36
2017-04-29Allow to deploy Octavia API & Neutron Server on 2 different nodesEmilien Macchi2-1/+7
Exporting the neutron::server parameter into the neutron_api service, so Octavia API and Neutron Server can be separated. Change-Id: Iee28b0e84a00bd589d6f14a73f0c3f32d310b393 Closes-Bug: #1687026
2017-04-28Merge "Enables support for configuring Cinder with Pure Storage FlashArray ↵Jenkins4-0/+89
storage backend"
2017-04-28Merge "Unset the UpgradeInitCommand on converge"Jenkins2-0/+2