aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-05-02Configure NTP for overcloud computeDan Prince2-0/+7
Updates the overcloud nova-compute templates so that the NTP server is properly configured. Change-Id: I4fc407153da5e031dcf5e5e5e1b3b74d932dba45 Partial-bug: #1309677
2014-05-02Specify group os-apply-config for config resourcesSteve Baker5-0/+7
This will indicate to os-collect-config that this config resource represents os-apply-config configuration data, so it can only write out top-level config files for os-apply-config data (or Heat::Ungrouped for backwards compatibility). Change-Id: I3552fdd6df8106ab83cfd17d5f4b137cf33fbc36 Related-Bug: #1299109
2014-05-01Scale the control plane in hosts files.Robert Collins1-14/+80
Being able to figure out the hypervisors from the control nodes seems useful, and equally all the hypervisors should know about all the control nodes (at least until we have virtual IPs all in place), and lastly the control plane need to know each other by hostname. Change-Id: I92877501c58d8c210e7b2c94935e107355271fb9
2014-04-28Adding SNMPd auth credentialsLadislav Smola4-2/+45
-Undercloud Ceilometer has to have access to SNMPd credentials, so it can poll the Overcloud nodes -In every Overcloud node, we need to set the same cretentials to SNMPd.conf Change-Id: Icf7c0c1772b6380b7136108e61c15cafe17274ba
2014-04-25Make size of loop device used by cinder LVM configurableDuncan Thomas3-4/+16
This was hard-coded to 5 gig, which is useless for anything other than tempest runs and smoke testing block-storage-nfs.yaml has intentionally not been changed, since volume_size_mb is not used in that setup. Cleaning up that code will be done separately. Change-Id: I476b906a8d439d3e6643dd0c214965c5862418e8
2014-04-23Increase PXE deployment timeout for overcloudMatthew Gilliard2-2/+12
The PXE deployment often times out on baremetal deployment with >5 overcloud nodes because the time being measured includes the dd of the image, which can be slow when many images are sent from the same undercloud host. Ideally we'd make the image sizes smaller, and/or make the undercloud cache the images more sanely. It would also be possible to split the timout to measure dd-time and boot-time separately, but for now we just make the timeout configurable so a user can raise it if they have problems. Change-Id: I15540eec7a68eab4c9d128b65a95b1c0a2b64582 Co-Author: nicholas.randon@hp.com
2014-04-23Expose dnsmasq optionsJames Slagle1-0/+6
Adds a new parameter, NeutronDnsmasqOptions, to the overcloud template. Allows the ability to set dnsmasq options for neutron dhcp agent. This will allow us to configure mtu to be 1400 for tenant instances on the overcloud. This should help with poor network performance and vm's that are just plain unreachable via ssh due to the GRE tunnel overhead. The default here has been set to: dhcp-option-force=26,1400 This is the recommended way to configure OpenStack with the Open vSwitch plugin per: http://docs.openstack.org/admin-guide-cloud/content/openvswitch_plugin.html All the documentation I can find on the web (openstack-dev, ask.openstack.org, etc), recommend applying this setting. Others have reported slow vm performance as well, and this resolves that issue (apparently anyway...we'd need to test). Change-Id: If24326045987b5a484ba2f71f591092987966536 Partial-Bug: #1270646
2014-04-22Merge "Add passthrough configuration glue."Jenkins3-0/+107
2014-04-18Merge "Adding undercloud ceilometer"Jenkins1-1/+16
2014-04-18Add passthrough configuration glue.Robert Collins3-0/+107
This provides a means for users to pass configuration through to the machines they are deploying without us modelling that. Change-Id: I7134eb0c6be2d5cb1795b2f03cfba4afb69dc837 blueprint: passthrough-config
2014-04-17Adding Swift proxy-server memcache metadataEamonn O'Toole3-12/+56
Swift proxy-servers use memcache to store and share metadata. This change adds swift.proxy-memcache metadata to the swift-source and swift-storage-source yaml templates modelled on the existing swift.devices metadata. This metadata will be consumed by the swift-proxy/os-config-applier/etc/swift/proxy-server.conf element if the metadata exists. Change-Id: If0b5724f69e7ec1c98e4dbdbeb9f08c4a18151b6
2014-04-16Adding undercloud ceilometerLadislav Smola1-1/+16
-adding Undercloud Ceilometer that will collect statistics about Overcloud nodes, via SNMP Change-Id: I1e90ad8d5bad16bc1c418ca2dbd78163abe6267c
2014-04-16Switch overcloud to software-configClint Byrum10-616/+412
This migrates the overcloud to using OS::Heat::StructuredConfig and OS::Heat::StructuredDeployment. With those tools, we can decouple servers from software configuration and begin to deprecate features in tripleo_heat_merge. Change-Id: Ice85f0711e90d0fabf1d1bc4698201c4d6758508
2014-04-11Merge "Stop using notCompute in favor of controller"Jenkins10-73/+73
2014-04-10Merge "Adding NTP to undercloud template"Jenkins1-0/+6
2014-04-09Stop using notCompute in favor of controllerDan Prince10-73/+73
Updates all references for notCompute and notcompute to use 'controller' instead. Change-Id: I70ef83f35064ab388bdc7e1a6da62b6585580010 Partial-bug: #1300324
2014-04-08Merge "Add mysql innodb buffer pool size"Jenkins2-0/+12
2014-04-08Merge "Allow setting the cinder iscsi-helper option"Jenkins2-0/+8
2014-04-07Merge "Add enable_tunneling to swift storage metadata"Jenkins1-0/+4
2014-04-07Merge "Add BlockStorage0Config Resource"Jenkins1-4/+41
2014-04-05Merge "Update templates to default to preserve ephemeral"Jenkins3-3/+3
2014-04-04Adding NTP to undercloud templateTrent Geerdes1-0/+6
Change-Id: I30c0e175fda448a300cae0b233757d31ce73402f
2014-04-03Add enable_tunneling to swift storage metadataJames Slagle1-0/+4
Add the enable_tunneling option to the neutron-openvswitch-agent metadata for the swift storage template. If not preset, this option is left blank in the openvswitch plugin configuration plugin. This causes the service to fail to start because a blank value is not permissible for a boolean option. Change-Id: Ieadcdab295913121bd00dbd25e4245024bc2240f
2014-04-01Add mysql innodb buffer pool sizeJan Provaznik2-0/+12
Innodb buffer pool size in mysql config file is now set to 592M, this value is for VMs with 2G RAM too much. This patch makes the pool size configurable and decreases default value to 100 MB (this should be sufficient for default devtest setup). A patch which for tripleo-image-element which sets this value in my.cnf will follow. Change-Id: I0d2529abe51d4dc34415bf6c40da7a267bf3e65b
2014-03-31Allow setting the cinder iscsi-helper optionBen Nemec2-0/+8
This is necessary to support iscsi helpers other than tgtadm, such as lioadm. Change-Id: I8a63872185f73372fcf6c90d3dde31e5bb0a168b
2014-03-27Add BlockStorage0Config ResourceJames Slagle1-4/+41
Add a BlockStorage0Config resource in the block-storage.yaml template. This was missing previously and was causing the behavior of having all block storage nodes only being created after all other nodes were up in a deployment (I presume b/c of the wait conditions). Also, we need the BlockStorage0Config resource so that we can get the configuration of neutron-openvswitch-agent from the metadata, previously the values in the file were unset, causing the service to fail to start. Change-Id: I297de24079d1ece66d35213b4ef1f2c8c50e73f0
2014-03-26Drop dnsmasq_range from the undercloud source.Dan Prince1-1/+0
We don't make use of dnsmasq_range anywhere so lets remove it. Change-Id: Id3e14aee8a9f720a09bc2c8ace99e06c4a2d09a9
2014-03-26Update templates to default to preserve ephemeralCian O'Driscoll3-3/+3
Updated heat templates to default to preserve ephemeral partition on a heat stack update. Allows undercloud and overcloud to be re-imaged/updated and state preserved. Change-Id: I6626af48d8c55672022a46fe48e5725ad2619f0c
2014-03-26Merge "Remove unnecessary cinder metadata"Jenkins2-2/+0
2014-03-26Merge "Adding image update policy to undercloud template"Jenkins1-0/+7
2014-03-25Fix Ironic templatesRobert Collins3-15/+16
The merge of ironic-source wasn't actually merging, leading to bad templates. As part of this add the needed SSH virtual power key (because like nova-bm, Ironic requires that for now). We also need to set the compute_manager for nova with Ironic, so that gets set too. Change-Id: I0d7d535dbac3584b3eb12865259ee6403e20c98f
2014-03-21Pass undercloud metadata to overcloud computeAllison Randal2-0/+49
Capture some undercloud metadata into the overcloud compute configs, so the overcloud nodes can pull updated images from the undercloud glance. Unset by default, but able to be set during stack-create or stack-update. Change-Id: I2997d23c584055c40034827e9beb58e6542ea11c
2014-03-21Adding image update policy to undercloud templateCian O'Driscoll1-0/+7
Allows image policy to be specified when updating the undercloud stack. This enables the preservation of persistent ephemeral disks. Change-Id: Id7bc0a72ae1737d2fdadb3f47006bd0cfb0bc42f Closes-Bug: #1295616
2014-03-17Merge "Change nova compute driver location"Jenkins1-1/+1
2014-03-14Change nova compute driver locationChris Krelle1-1/+1
This patch changes the location of the Ironic Nova compute driver in nova.conf so that it uses the driver from within the Ironic directory tree. This patch will need to be reverted once the Ironic Nova driver lands in the nova. Change-Id: I9199d506f3665cb0827edd642a1806713a42b90e
2014-03-14Remove unnecessary cinder metadataRyan Brady2-2/+0
Previously all cinder functionality was in a single element and required "volume: 'true'" to install the cinder-volume service. Now cinder has been split into multiple elements and you build an image with the cinder-volume element to achieve the same goal. This patch removes the "volume: 'true'". Change-Id: I2ed2e6f7c7db7619aee7ce4ba730f310344e0b0e
2014-03-13Add Wait Condition to Block Storage TemplatesRyan Brady2-0/+22
In some environments the heat stack-create command would complete even though the block storage node would still be in a build/spawning state. This patch adds a wait condition to ensure the block storage node has a chance to complete and the stack-create command to complete properly. Change-Id: Idb524625b8d6df1ff6f927c22b72bc6d3d611686 Partial-Bug: #1290764
2014-03-13Merge "Add heat.stack_domain_admin_password"Jenkins3-0/+18
2014-03-12Merge "Merge Block Storage into Overcloud"Jenkins1-11/+4
2014-03-12Merge "Remove Duplicate Rabbit Parameters"Jenkins1-7/+0
2014-03-12Add heat.stack_domain_admin_passwordClint Byrum3-0/+18
This new parameter will be used to configure Heat for the new required stack domain admin. Change-Id: Ieace33154a14f472aab8ac76b2b876db77230110 Partial-Bug: #1287453
2014-03-12Merge "Swift storage heat templates"Jenkins3-11/+149
2014-03-11Remove Duplicate Rabbit ParametersRyan Brady1-7/+0
This patch removes the duplicate rabbit username and password parameters. These parameters cause a conflict when running merge.py because they already exist in the overcloud template. Change-Id: I01d386577734c7c516a477e1e402882294ac4376
2014-03-11Merge Block Storage into OvercloudRyan Brady1-11/+4
This patch removes the seperate overcloud-with-block-storage.yaml make target and merges the functionality into the main overcloud.yaml target. The default BLOCKSTORAGESCALE is 0. Change this number to add additional block storage nodes. This patch also updates the overcloud-with-block-storage-nfs target to more closely resemble the overcloud.yaml target, including swift and ssl templates as needed. The default BLOCKSTORAGESCALE is 1. Change this number to add additional block storage nodes. Change-Id: Ifcc733cfbf9f356393c3f6c72b2bbbb0214d3040
2014-03-11Merge "Add rabbit.cookie attribute"Jenkins3-0/+32
2014-03-10Swift storage heat templatesRichard Su3-11/+149
Updated the existing swift-source template to properly list all swift devices. Created a new swift-storage-source template to add additional swift-storage only nodes. The default SWIFTSTORAGESCALE is 0. Change this number to add additional swift storage nodes. Change-Id: Ia05f4ad44593316430d60541106d23b032c3e760
2014-03-07Adds block-storage-nfs templateRyan Brady4-6/+103
To support the changes to the cinder element to allow the nfs backend to be utilized, this template has been added to show the usage of the nfs_shares key in the cinder metadata. The value is a list of strings containing share addresses. This change is added to facilitate an example to test the cinder element change: https://review.openstack.org/#/c/74563/ You may setup the nfs server manually or use the nfs-server element at https://review.openstack.org/#/c/74712/. Change-Id: I5b6cb118b34421ea07a81ed1fe68db24b1d4f19d
2014-03-06Merge "Fix Merge::Map for scatter-gather in Configs."Jenkins2-1/+138
2014-03-06Merge "Add a check target."Jenkins1-1/+3
2014-03-05Fix bad indentationJames Slagle1-4/+4
Lines for notifier-strategy and log-file had 1 level too much of identation causing an error in the available metadata. Change-Id: I559855887349bf2bbab87788ef9baa216bde60d8