summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-09-06Merge "Set mode for ansible written files" into stable/pikeJenkins3-8/+9
2017-09-06Merge "Escape ceph capabilities for manila client" into stable/pikeJenkins1-1/+1
2017-09-06Merge "Add support for Dell EMC Isilon Manila backend" into stable/pikeJenkins10-0/+106
2017-09-06Merge "Add support for Dell EMC VMAX Manila Backend" into stable/pikeJenkins10-0/+110
2017-09-06Merge "manila: set "neutron_admin_auth_url" correctly" into stable/pikeJenkins2-1/+5
2017-09-06Escape ceph capabilities for manila clientJan Provaznik1-1/+1
Capabilities were not properly escaped and ignored by ceph. Change-Id: I099c3d9bad95ec69ac85fe406e3e1d4685ede439 Closes: #1713928
2017-09-06Allow upgrade tasks to run when looping through stepsMarius Cornea2-4/+4
Currently for non controller upgrades we're looping through the upgrade steps and run the upgrade tasks based on when conditionals including the step number and the existing upgrade task condition. Some of tasks fail because the variables used in when conditionals are not available through all steps. This change adds default values to these vars where possible or creates them for all steps to avoid failures. Related-Bug: 1708115 Change-Id: I5c731043cec8e31fc82ca98972a301baa7294c4f (cherry picked from commit e2f00ef1dc98140087c81e202a520f549f9a0970)
2017-09-05Add support for Dell EMC Isilon Manila backendrajinir10-0/+106
This change adds support for manila::backend::dellemc_isilon Change-Id: I92592e4b717d4b1812ccd810ec1daaedd181c3dd Implements: blueprint dellemc-isilon-manila (cherry picked from commit f6c9906d51fb3268b7a7d61d53181ab5d3c0d2ec)
2017-09-05Add support for Dell EMC VMAX Manila Backendrajinir10-0/+110
This change adds support for manila::backend::dellemc_vmax Change-Id: I92e189c8741c496ef6c27130f73829c327a99f1b Implements: blueprint dellemc-vmax-manila (cherry picked from commit 04daabdc8414e4435dc4cd3ccfea9a62b5631261)
2017-09-05Set mode for ansible written filesSteven Hardy3-8/+9
Use a more restrictive mode for these files, as some may contain sensitive data which shouldn't be world readable Closes-Bug: #1714986 Change-Id: Ib1e79b1d4e25d6e329938402b1ca776bdab81bdd (cherry picked from commit 94c7752cfae64d96124a32bc36ccd6ec7b4df4a7)
2017-09-05Merge "Remove bgp-vpn from scenario004-multinode-containers" into stable/pikeJenkins1-5/+3
2017-09-05manila: set "neutron_admin_auth_url" correctlyTom Barron2-1/+5
It was being set using NeutronAdmin endpoint but it is an authorization url. Set it using KeystoneInternal endpoint. Change-Id: I23f4a895628ac909a1fe1f93cecefa84f25858b1 Closes-Bug: #1712908 (cherry picked from commit 7380183cf590b74f5ad84bb40a8afa08979c235b)
2017-09-05Remove bgp-vpn from scenario004-multinode-containersEmilien Macchi1-5/+3
See full context on https://bugs.launchpad.net/bugs/1713612 but this service isn't containerized yet, so the plan is: - in Pike, we'll run scenario004 (baremetal) and test bgp-vpn and l2gw - in Queens, we'll run scenario004 (baremetal at the beginning) but scenario004-container will be the default and we'll re-add the 2 services when containerized. Change-Id: I04c2a9fb63420b7d8d3616a8ef7a50d2aadc6165 (cherry picked from commit fde4ff2c64f374e109dbb7da87cc7d72da5e0ef5)
2017-09-05Switch manila-share to pacemaker version in scenario004/containersGiulio Fidente1-1/+1
Change-Id: Iefc0d04b19953ece60cf5c886258ed794e5c795d Depends-On: Iba97c0a6a4b4b0529c6434d58275a3d362b74947 Related-Bug: #1712070 (cherry picked from commit 02cd34d148d6abf11cc64852f7931cbd4bccf767)
2017-09-04Add clustercheck to service list for scenariosJiri Stransky15-0/+15
This service is necessary when we containerized TripleO with Pacemaker. The service is added also to non-containerized scenario lists, because the aim is to get rid of the -containers.yaml variants eventually. This shouldn't affect any jobs that don't include docker-ha.yaml. The resource registry entry is mapped to OS::Heat::None by default, and docker-ha.yaml maps it to actual containerized clustercheck. Change-Id: I342e29de52cb6ce069a05a2dbfb0501a2da200e6 Partial-Bug: #1712070 (cherry picked from commit 5b805cb37eec3097552314c6ce43c02c2a604d81)
2017-09-04Merge "Stop hardcoding host's config volume path" into stable/pikeJenkins1-1/+1
2017-09-04Merge "Manually set healthchecks for _cron services" into stable/pikeJenkins4-0/+8
2017-09-04Merge "Configure Zaqar trust notifier" into stable/pikeJenkins1-0/+3
2017-09-04Merge "Fix containerized zaqar-api db_sync" into stable/pikeJenkins1-1/+2
2017-09-04Merge "Use list_concat in place of yaql" into stable/pikeJenkins12-311/+276
2017-09-04Merge "Updated from global requirements" into stable/pikeJenkins1-1/+1
2017-09-04Merge "Separate config_volume for ringbuilder" into stable/pikeJenkins2-4/+21
2017-09-04Merge "Remove tacker from containers scenario001" into stable/pikeJenkins1-2/+0
2017-09-04Stop hardcoding host's config volume pathMartin André1-1/+1
Get the path from the CONFIG_VOLUME_PREFIX environment variable. This is useful for debugging and generate configuration files to a different directory. Change-Id: Ib85e3898804312ebb6677a5fa189fbfc357ce27c (cherry picked from commit 0c62b6cd8d696befb1c0c31bb6e206199ce1edac)
2017-09-03Fix containerized zaqar-api db_syncBogdan Dobrelya1-1/+2
Correct the zaqar service name to match the bootstrap host id name Closes-bug: #1714253 Change-Id: Iced8f3a7e64d9023bd46a50629a56e087d1f6f24 Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com> (cherry picked from commit d782f687cb7794e0491c0d0f6dc3d9b28196dc96)
2017-09-02Merge "Add support for Dell EMC VMAX ISCSI Backend" into stable/pikeJenkins7-0/+85
2017-09-02Add support for Dell EMC VMAX ISCSI Backendrajinir7-0/+85
This change adds a new define for cinder::backend::dellemc_vmax_iscsi Change-Id: I7c685e0a3186da138964f17b487fb0c3533f58c7 Implements: blueprint dellemc-vmax-isci (cherry picked from commit c77189905525c6fe834e001f2231b9eab788cd01)
2017-09-02Separate config_volume for ringbuilderJames Slagle2-4/+21
Use a separate config_volume for swift_ringbuilder puppet_config tasks. This is necessary so that the swift_ringbuilder and swift-storage services don't both rsync files to the same bind mounted directory. The rsync command from docker-puppet.py uses --delete-after, so when they both use the same config_volume, they can end up deleting the files generated by the other (depending on the order of execution). Even though a separate config_volume is used, the rings must still end up in /etc/swift for the swift services containers. An additional container init task is used to copy the ring files into /var/lib/config-data/puppet-generated/swift/etc/swift so that they will be present when the actual swift services containers are started. Change-Id: I05821e76191f64212704ca8e3b7428cda6b3a4b7 Closes-Bug: #1710952 (cherry picked from commit cba00abb7517efa6a8d9b8fb954563204323ffed)
2017-09-02Configure Zaqar trust notifierThomas Herve1-0/+3
Change-Id: Id7d5967370a5d3fa0183359349f502f32a0109da (cherry picked from commit e1b1b5654d70c4a38be340070648d0fb7932bcc8)
2017-09-02Manually set healthchecks for _cron servicesDan Prince4-0/+8
The docker _cron services show up as (unhealthy) due to them sharing the containers for the OpenStack services. As such we need to manually override the health checks for these services. By setting them to /bin/true the services should show up has healthy. Change-Id: I46e12bcec226fbe2768c7fe8f0e7719df46401a9 Closes-bug: #1713183 (cherry picked from commit d1aaf0aadf487ccfcdecb47f3cfbf6087401242b)
2017-09-02Use list_concat in place of yaqlThomas Herve12-311/+276
Where applicable, use list_concat instead of yaql to build new lists: it should be more resilient to errors, easier to debug, and less expensive. Change-Id: I6d3dbc7ee8eac50f46023a35af4ec7f2d378fd87 Related-Bug: #1714005 (cherry picked from commit 8008089de24437757d3ba10299bb1041b4aa627a)
2017-09-02NetworkDeploymentActions shall be made role specificKarthik S1-1/+14
In case of an OSP upgrade, some of the roles may require the reconfiguration of network via os-net-config, especially with roles having DPDK nics. In order to facilitate this configuration per role, the THT parameter 'NetworkDeploymentActions' is made role specific. Change-Id: I17a1812cf9e1c60fb893bf36dc99ab3ec5fc7250 (cherry picked from commit 88711c3b800257f6b333157eb3dfc8f4e7003a46)
2017-09-02Merge "Convert enable-internal-tls.yaml to be generated" into stable/pikeJenkins4-1/+75
2017-09-02Convert enable-internal-tls.yaml to be generatedBen Nemec4-1/+75
All of the other SSL environments were converted, but this one was missed. That's an inconsistent user experience and should be cleaned up. This environment also exposed a bug in the tool where it did not include the parameter_defaults section key if all the parameters were marked static. Change-Id: I19bc422c22b9f60f781e696ce703b026dc317786 Closes-Bug: 1713761 (cherry picked from commit 7c06db3d1c384773c4abccbce450c259f75e5e4a)
2017-09-01Fix hardcoded references to deprecated *ExtraConfig parametersSteven Hardy1-19/+14
These were missed in the previous refactor in role.role.j2.yaml, we shouldn't reference these via hard-coded values or they become mandatory in the roles_data.yaml Change-Id: I014e7d6679c5733b17243d647eaad228c276585a Closes-Bug: #1711656 (cherry picked from commit 4a4f6783081d9c5b74cda5149bef7655102fcfd8)
2017-09-01Merge "Remove ipv6 specific network templates" into stable/pikeJenkins12-473/+216
2017-09-01Merge "Add storage backends env files for containerized deployment" into ↵Jenkins2-0/+52
stable/pike
2017-09-01Remove tacker from containers scenario001John Trowbridge1-2/+0
The containerized implementation of tacker is incomplete in THT, and relies on the pre-pike single "tacker" container. Container builds using the final pike release of kolla build three tacker containers to have seperate conductor and server containers. According to this bug[1], tacker does not even work without this conductor. Our scenario job needs to be updated to actually test tacker is working. This will need to be backported to pike, and we can work on better supporting tacker in containers in queens. [1] https://bugs.launchpad.net/tripleo/+bug/1710874 Change-Id: I7cab33687a05bf6ba5c6fb70ba21f3250d3ef381 Partial-Bug: 1714270
2017-09-01Remove ipv6 specific network templatesDan Sneddon12-473/+216
This change renders the IPv6 versions of the isolated networks using j2. To allow for backward compatibility, there will be 2 versions of the network definitions, <network>.yaml and <network>_v6.yaml. If the ip_subnet contains an IPv6 address, or if ipv6: true is set on the network definition in network_data.yaml, then the <network>.yaml version will contain an IPv6 definition, otherwise the <network>.yaml will be IPv4, and the <network>_v6.yaml will be IPv6. In a future follow-up patch, we will probably only create the required versions of the networks, either IPv4, IPv6, not both. The ipv6_subnet, ipv6_allocation_pools, and ipv6_gateway settings in the network_data.yaml definition file are used for the <network>_v6.yaml network definition. Note that these subnet/cidr/gateway definitions only set the defaults, which can be overridden with parameters set in an environment file. Since the parameters for IP and subnet range are the same (e.g. InternalApiNetCidr applies to both IPv4/v6), only one version can be used at a time. If an operator wishes to use dual-stack IPv4/IPv6, then two different networks should be created, and both networks can be applied to a single interface. Note that the workflow for the operator is the same as before this change, but a new example template has been added to environments/network-environment-v6.yaml. Change-Id: I0e674e4b1e43786717ae6416571dde3a0e11a5cc Partially-Implements: blueprint composable-networks Closes-bug: 1714115 (cherry picked from commit dd299f08bd6b1df43760148d83ce9b6e09ba6572)
2017-09-01Updated from global requirementsOpenStack Proposal Bot1-1/+1
Change-Id: Ie3f8798c2c3f967ffc867b1a55abab13f9f042a1
2017-09-01Merge "Update generated ssl environments" into stable/pikeJenkins2-100/+0
2017-09-01Merge "Telemetry specific config for scenario001" into stable/pikeJenkins2-0/+6
2017-09-01Merge "Move deprecated SchedulerHints logic to overcloud.j2.yaml" into ↵Jenkins2-23/+29
stable/pike
2017-09-01Add storage backends env files for containerized deploymentVictoria Martinez de la Cruz2-0/+52
A storage backend has to be selected when deploying manila, otherwise the manila-share service will fail to start. For this, we have some environment files specifying the configuration for different storage backends. We need a dockerized version for this environment files. In this patch set we add those environment files. Change-Id: I9886016b02bec26699af1f8165d7b0702dfe8b9b Partial-Bug: #1668922 (cherry picked from commit d7d54594410f60ea6ebf1301048d95f64c66f645)
2017-09-01Merge "Add --wsrep-provider=none to the mysql_bootstrap container" into ↵Jenkins1-2/+2
stable/pike
2017-09-01Merge "Remove puppet run and workarounds from tripleo_upgrade_node.sh" into ↵Jenkins4-73/+23
stable/pike
2017-09-01Update generated ssl environmentsBen Nemec2-100/+0
These were edited manually and the input file was not updated, which is causing problems when trying to generate new/updated envs. Change-Id: Ia2e53e52361e35d94e2dedf9b8885498693bc2e0 Partial-Bug: 1713761 (cherry picked from commit 406b1982ba530abdd6c629780130851e8e335ae8)
2017-08-31Remove puppet run and workarounds from tripleo_upgrade_node.shmarios4-73/+23
For bug 1708115 and the O..P upgrade, and for the upgrade of 'non-controlers' we are now generating ansible playbooks from collected service upgrade_tasks and these are executed instead of the legacy tripleo_upgrade_node.sh. To clarify, by 'non-controllers' it is meant any node for which the corresponding roles_data.yaml role has the disable_upgrade_deployment flag set True. As a first pass, I am removing the workarounds from the script but keeping its delivery mechanism for now in case it is needed still. We can either update here to remove it or keep it until next cycle The most important part for now is that we no longer 'manually' run puppet here. Instead the post_deploy_steps are also collected into a playbook and will be executed after the upgrade_tasks (see the bug for discussion of the mechanism and related reviews) Change-Id: Ib017b0ab435ca9558cf8659d434489cdf01df955 Related-Bug: 1708115 (cherry picked from commit 4c5b9c5c967105536106fa4a7e1ec2352b14b08c)
2017-08-31Add --wsrep-provider=none to the mysql_bootstrap containerMichele Baldessari1-2/+2
Depending on the version of mariadb/galera installed the mysql_bootstrap command might fail. With the following unrevealing error: openstack-mariadb-docker:2017-08-28.10 "bash -ec 'if [ -e /v" 3 hours ago Exited (124) 3 hours ago The timeout is actually due to the fact that the following snippets does not complete within 60 seconds: """ if [ -e /var/lib/mysql/mysql ]; then exit 0; fi kolla_start mysqld_safe --skip-networking --wsrep-on=OFF & timeout ${DB_MAX_TIMEOUT} /bin/bash -c ''until mysqladmin -uroot -p"${DB_ROOT_PASSWORD}" ping 2>/dev/null; do sleep 1; done'' mysql -uroot -p"${DB_ROOT_PASSWORD}" -e "CREATE USER ''clustercheck''@''localhost'' IDENTIFIED BY '${DB_CLUSTERCHECK_PASSWORD}'';" mysql -uroot -p"${DB_ROOT_PASSWORD}" -e "GRANT PROCESS ON *.* TO ''clustercheck' """ The problem is that with older mariadb versions: galera-25.3.16-3.el7ost.x86_64 mariadb-5.5.56-2.el7.x86_64 The mysqld_safe process starts in galera mode (as opposed as to single local mode): 170830 17:03:05 [Note] WSREP: Start replication 170830 17:03:05 [Note] WSREP: GMCast version 0 ... 170830 17:03:05 [ERROR] WSREP: wsrep::connect() failed: 7 170830 17:03:05 [ERROR] Aborting That means that even though we specified --wsrep-on=OFF it is still starting in cluster mode. Let's add the extra --wsrep-provider=none which older versions required. Let's also add a '-x' to this transient container as that would have helped a bit because we would have understood right away that it was mysqld_safe that was not starting. I tested this successfully on an environment that showed the problem. The new option is still accepted by newer DB versions in any case. Closes-Bug: #1714057 Change-Id: Icf67fd2fbf520e8a62405b4d49e8d5169ff3925b Co-Authored-By: Mike Bayer <mbayer@redhat.com> (cherry picked from commit c19968ca852ab608513fe692aab958af25276220)
2017-08-31Telemetry specific config for scenario001Pradeep Kilambi2-0/+6
- Set gnocchi archivepolicy in scenario001 job to high - Set polling interval to 15 seconds instead of 300 Change-Id: Ie12abe1f03d000824c5fb1a46d74b94ce49d7876 (cherry picked from commit 0855d4c7b12d27721044ab09ca0d6e8f188d2e90)