diff options
Diffstat (limited to 'releasenotes')
40 files changed, 255 insertions, 1 deletions
diff --git a/releasenotes/notes/Add-Internal-TLS-CA-File-parameter-c24ee13daaa11dfc.yaml b/releasenotes/notes/Add-Internal-TLS-CA-File-parameter-c24ee13daaa11dfc.yaml new file mode 100644 index 00000000..8847b22b --- /dev/null +++ b/releasenotes/notes/Add-Internal-TLS-CA-File-parameter-c24ee13daaa11dfc.yaml @@ -0,0 +1,6 @@ +--- +features: + - Adds the InternalTLSCAFile parameter, which defines which CA file should be + used by the internal services to verify that the peer's certificate is + trusted. This is applicable if internal TLS is enabled. Currently, it + defaults to using the CA file for FreeIPA, which is the default CA. diff --git a/releasenotes/notes/Disable-mongodb-by-default-cce37d3254a77d27.yaml b/releasenotes/notes/Disable-mongodb-by-default-cce37d3254a77d27.yaml new file mode 100644 index 00000000..e6e452f2 --- /dev/null +++ b/releasenotes/notes/Disable-mongodb-by-default-cce37d3254a77d27.yaml @@ -0,0 +1,8 @@ +--- +upgrade: + - Mongodb is no longer used by default, so now one has to enable it + explicitly if there's a need for using it. +other: + - Mongodb is not used by any service we enable by default, so it has been + removed from the default services. It has subsequently been added to the + services that use it (zaqar and ceilometer-collector). diff --git a/releasenotes/notes/Enable-TLS-for-libvirt-0aab48cd8339da0f.yaml b/releasenotes/notes/Enable-TLS-for-libvirt-0aab48cd8339da0f.yaml new file mode 100644 index 00000000..e8941b7c --- /dev/null +++ b/releasenotes/notes/Enable-TLS-for-libvirt-0aab48cd8339da0f.yaml @@ -0,0 +1,6 @@ +--- +features: + - | + If TLS in the internal network is enabled, libvirt's transport defaults to + using TLS. This can be changed by setting the ``UseTLSTransportForLiveMigration`` + parameter, which is ``true`` by default. diff --git a/releasenotes/notes/add-all-hosts-to-hostsentry-20a8ee8a1a210ce2.yaml b/releasenotes/notes/add-all-hosts-to-hostsentry-20a8ee8a1a210ce2.yaml new file mode 100644 index 00000000..b0ad9d93 --- /dev/null +++ b/releasenotes/notes/add-all-hosts-to-hostsentry-20a8ee8a1a210ce2.yaml @@ -0,0 +1,9 @@ +--- +fixes: + - Previously only the VIPs and their associated hostnames were present + in the HostsEntry output, due to the hosts_entries output on the + hosts-config.yaml nested stack being empty. It was referencing an + invalid attribute. See + https://bugs.launchpad.net/tripleo/+bug/1683517 + + diff --git a/releasenotes/notes/add-cadf-environment-0ce0078348c5333f.yaml b/releasenotes/notes/add-cadf-environment-0ce0078348c5333f.yaml new file mode 100644 index 00000000..a45938b0 --- /dev/null +++ b/releasenotes/notes/add-cadf-environment-0ce0078348c5333f.yaml @@ -0,0 +1,7 @@ +--- +features: + - Add new cadf.yaml environment, that will configure + Keystone to emit CADF notifications. This standard + provides auditing capabilities for compliance with + security, and is intented to be used for deploying + TripleO with hardened security. diff --git a/releasenotes/notes/add-l2gw-agent-1a2f14a6ceefe362.yaml b/releasenotes/notes/add-l2gw-agent-1a2f14a6ceefe362.yaml new file mode 100644 index 00000000..7f88e269 --- /dev/null +++ b/releasenotes/notes/add-l2gw-agent-1a2f14a6ceefe362.yaml @@ -0,0 +1,3 @@ +--- +features: + - Add support for L2 Gateway Neutron agent diff --git a/releasenotes/notes/add-support-for-pure-cinder-1a595f1940d5a06f.yaml b/releasenotes/notes/add-support-for-pure-cinder-1a595f1940d5a06f.yaml new file mode 100644 index 00000000..da326e4d --- /dev/null +++ b/releasenotes/notes/add-support-for-pure-cinder-1a595f1940d5a06f.yaml @@ -0,0 +1,3 @@ +--- +features: + - Added Pure Storage FlashArray iSCSI and FC backend support for cinder diff --git a/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml b/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml new file mode 100644 index 00000000..46f3b855 --- /dev/null +++ b/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml @@ -0,0 +1,6 @@ +--- +fixes: + - | + During a deployment on lower spec systems, the "db sync" can take longer + than five minutes. value of DatabaseSyncTimeout has change from 300 + to 900 at the environment file "low-memory-usage.yaml". diff --git a/releasenotes/notes/change-rabbitmq-ha-mode-policy-default-6c6cd7f02181f0e0.yaml b/releasenotes/notes/change-rabbitmq-ha-mode-policy-default-6c6cd7f02181f0e0.yaml new file mode 100644 index 00000000..d6f74eff --- /dev/null +++ b/releasenotes/notes/change-rabbitmq-ha-mode-policy-default-6c6cd7f02181f0e0.yaml @@ -0,0 +1,11 @@ +--- +upgrade: + - | + We are not changing the rabbitmq ha-mode policy during upgrades any longer. + The policy chosen at deploy time will remain the same but can be changed + manually. +fixes: + - | + Due to https://bugs.launchpad.net/tripleo/+bug/1686337 we switch the + default of rabbitmq back ha-mode "all". This is to make the installation + more robust in the face of network issues. diff --git a/releasenotes/notes/configurable-snmpd-options-3954c5858e2c7656.yaml b/releasenotes/notes/configurable-snmpd-options-3954c5858e2c7656.yaml new file mode 100644 index 00000000..d69bf4f6 --- /dev/null +++ b/releasenotes/notes/configurable-snmpd-options-3954c5858e2c7656.yaml @@ -0,0 +1,6 @@ +--- +features: + - | + Per default, don't log a message in syslog for each incoming SNMP query. + So set the default log level to '-LS0-5d'. Allow the operator to customize + the log level via a parameter. diff --git a/releasenotes/notes/deprecate-ceilometer-expirer-83b193a07631d89d.yaml b/releasenotes/notes/deprecate-ceilometer-expirer-83b193a07631d89d.yaml new file mode 100644 index 00000000..9088f963 --- /dev/null +++ b/releasenotes/notes/deprecate-ceilometer-expirer-83b193a07631d89d.yaml @@ -0,0 +1,11 @@ +--- +upgrade: + - With expirer deprecated and disabled by default, there is an upgrade + impact here. If you had expirer enabled in ocata and you upgrade to + pike the expirer will not be enabled anymore. If you wish to use + expirer, ensure you include the ceilometer-expirer.yaml + to your upgrade deploy command. Also note that with collector + disabled, there is no need for expirer to be running. +deprecations: + - Deprecate and turn off expirer service as collector. Without collector + and standard storage, expirer has no use. diff --git a/releasenotes/notes/deprecate-collector-a16e5d58ae00806d.yaml b/releasenotes/notes/deprecate-collector-a16e5d58ae00806d.yaml new file mode 100644 index 00000000..b9546a90 --- /dev/null +++ b/releasenotes/notes/deprecate-collector-a16e5d58ae00806d.yaml @@ -0,0 +1,14 @@ +--- +upgrade: + - With collector deprecated and disabled by default, there is an upgrade + impact here. If you had collector enabled in ocata and you upgrade to + pike the collector will not be enabled anymore. If you wish to use + collector, ensure you include the ceilometer-collector.yaml + to your upgrade deploy command. We recommend switching to using the + new pipeline approach with publisher instead. +deprecations: + - Deprecate and disable ceilometer collector service by default. Instead + use the publisher directly in the pipeline to push data where appropriate. + This can be manually enabled by passing the environment file to deploy + command which is included in environment dir as ceilometer-collector.yaml. + By default, the pipeline publisher pushes data automatically to gnocchi. diff --git a/releasenotes/notes/deprecate-panko-b2bdce647d2b9a6d.yaml b/releasenotes/notes/deprecate-panko-b2bdce647d2b9a6d.yaml new file mode 100644 index 00000000..96f2c554 --- /dev/null +++ b/releasenotes/notes/deprecate-panko-b2bdce647d2b9a6d.yaml @@ -0,0 +1,5 @@ +--- +deprecations: + - Panko API service is deprecated in Pike release. Note that this service + will remain enabled by default as there is no replacement yet. This will + be disabled in future releases. diff --git a/releasenotes/notes/disable-manila-cephfs-snapshots-by-default-d5320a05d9b501cf.yaml b/releasenotes/notes/disable-manila-cephfs-snapshots-by-default-d5320a05d9b501cf.yaml new file mode 100644 index 00000000..98d70b63 --- /dev/null +++ b/releasenotes/notes/disable-manila-cephfs-snapshots-by-default-d5320a05d9b501cf.yaml @@ -0,0 +1,5 @@ +--- +upgrade: + - | + Disabled cephfs snapshot support (ManilaCephFSNativeCephFSEnableSnapshots + parameter) in manila by default. diff --git a/releasenotes/notes/disable_default_apache_vhost-f41d11fe07605f7f.yaml b/releasenotes/notes/disable_default_apache_vhost-f41d11fe07605f7f.yaml new file mode 100644 index 00000000..279e25cc --- /dev/null +++ b/releasenotes/notes/disable_default_apache_vhost-f41d11fe07605f7f.yaml @@ -0,0 +1,6 @@ +--- +upgrade: + - | + Disable default vhost for apache. It is required for a hybrid deployments + when WSGI based services running both at host and in containers, without + conflicting default ports. diff --git a/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml b/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml new file mode 100644 index 00000000..4025477b --- /dev/null +++ b/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml @@ -0,0 +1,9 @@ +--- +other: + - | + All nodes now enable ``arp_accept`` sysctl setting to help with honoring + gratuitous ARP packets in their ARP tables. While sources of gratuitous ARP + packets are diverse, this comes especially useful for Neutron floating IP + addresses that roam between devices, and for which Neutron L3 agent sends + gratuitous ARP packets to update all network nodes about IP address new + locations. diff --git a/releasenotes/notes/expose-metric-processing-delay-0c098d7ec0af0728.yaml b/releasenotes/notes/expose-metric-processing-delay-0c098d7ec0af0728.yaml new file mode 100644 index 00000000..1fc4f105 --- /dev/null +++ b/releasenotes/notes/expose-metric-processing-delay-0c098d7ec0af0728.yaml @@ -0,0 +1,3 @@ +--- +fixes: + - Expose metric_processing_delay to tweak gnocchi performance. diff --git a/releasenotes/notes/glance-keystonev3-d35182ba9a3778eb.yaml b/releasenotes/notes/glance-keystonev3-d35182ba9a3778eb.yaml new file mode 100644 index 00000000..072e85aa --- /dev/null +++ b/releasenotes/notes/glance-keystonev3-d35182ba9a3778eb.yaml @@ -0,0 +1,4 @@ +--- +features: + - Deploy Glance with Keystone v3 endpoints and make + sure it doesn't rely on Keystone v2 anymore. diff --git a/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml b/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml new file mode 100644 index 00000000..88f67a03 --- /dev/null +++ b/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml @@ -0,0 +1,4 @@ +--- +other: + - Increased the default of NovaReservedHostMemory for + Compute nodes to 4096 MB. diff --git a/releasenotes/notes/ironic-boot-option-3f3036aa5e82ec7e.yaml b/releasenotes/notes/ironic-boot-option-3f3036aa5e82ec7e.yaml new file mode 100644 index 00000000..53191bd0 --- /dev/null +++ b/releasenotes/notes/ironic-boot-option-3f3036aa5e82ec7e.yaml @@ -0,0 +1,12 @@ +--- +features: + - | + New configuration ``IronicDefaultBootOption`` allows to change the default + boot option to use for bare metal instances in the overcloud. +upgrade: + - | + The default boot option for bare metal instances in overcloud was changed + to "local". This was already the default for whole-disk images, but for + partition images it requires ``grub2`` to be installed on them. + Use the new ``IronicDefaultBootOption`` configuration to override, or + set ``boot_option`` capability on nodes and flavors. diff --git a/releasenotes/notes/ironic-hardware-types-fe5140549d3bb792.yaml b/releasenotes/notes/ironic-hardware-types-fe5140549d3bb792.yaml new file mode 100644 index 00000000..da3da6c7 --- /dev/null +++ b/releasenotes/notes/ironic-hardware-types-fe5140549d3bb792.yaml @@ -0,0 +1,9 @@ +--- +features: + - | + Configuring enabled Ironic hardware types is now possible via new + ``IronicEnabledHardwareTypes`` parameter. See this spec for details: + http://specs.openstack.org/openstack/ironic-specs/specs/approved/driver-composition-reform.html. + - | + Bare metal serial console support via ``socat`` utility is enabled for + Ironic hardware types supporting it (currently only ``ipmi``). diff --git a/releasenotes/notes/match-enable_dvr-with-NeutronEnableDVR-fe8aac6c4ce52bce.yaml b/releasenotes/notes/match-enable_dvr-with-NeutronEnableDVR-fe8aac6c4ce52bce.yaml new file mode 100644 index 00000000..54400432 --- /dev/null +++ b/releasenotes/notes/match-enable_dvr-with-NeutronEnableDVR-fe8aac6c4ce52bce.yaml @@ -0,0 +1,6 @@ +--- +upgrade: + - | + Neutron API controller no longer advertises ``dvr`` extension if the + cloud is not configured for DVR. This is achieved by setting ``enable_dvr`` + to match ``NeutronEnableDVR`` setting. diff --git a/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml b/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml new file mode 100644 index 00000000..ae6401fb --- /dev/null +++ b/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml @@ -0,0 +1,7 @@ +--- +features: + - Move Mistral API to use mod_wsgi under Apache. +upgrade: + - Mistral API systemd service will be stopped and + disabled. + diff --git a/releasenotes/notes/nsx-support-1254839718d8df8c.yaml b/releasenotes/notes/nsx-support-1254839718d8df8c.yaml new file mode 100644 index 00000000..1d9f5f8a --- /dev/null +++ b/releasenotes/notes/nsx-support-1254839718d8df8c.yaml @@ -0,0 +1,3 @@ +--- +features: + - Add support for NSX Neutron plugin diff --git a/releasenotes/notes/octavia-1687026-c01313aab53f55a4.yaml b/releasenotes/notes/octavia-1687026-c01313aab53f55a4.yaml new file mode 100644 index 00000000..2ba01c71 --- /dev/null +++ b/releasenotes/notes/octavia-1687026-c01313aab53f55a4.yaml @@ -0,0 +1,5 @@ +--- +fixes: + - | + Octavia API and Neutron Server can now be deployed on separated nodes. + See https://bugs.launchpad.net/tripleo/+bug/1687026 diff --git a/releasenotes/notes/pluggable-server-type-per-role-314f38f8e5d4c84e.yaml b/releasenotes/notes/pluggable-server-type-per-role-314f38f8e5d4c84e.yaml new file mode 100644 index 00000000..5b58d3d4 --- /dev/null +++ b/releasenotes/notes/pluggable-server-type-per-role-314f38f8e5d4c84e.yaml @@ -0,0 +1,8 @@ +--- +features: + - The server resource type, OS::TripleO::Server can now be + mapped per role instead of globally. This allows users to + mix baremetal (OS::Nova::Server) and + deployed-server (OS::Heat::DeployedServer) server resources + in the same deployment. See + https://blueprints.launchpad.net/tripleo/+spec/pluggable-server-type-per-role diff --git a/releasenotes/notes/redfish-9203af1f7bf02bc5.yaml b/releasenotes/notes/redfish-9203af1f7bf02bc5.yaml new file mode 100644 index 00000000..8c24a22f --- /dev/null +++ b/releasenotes/notes/redfish-9203af1f7bf02bc5.yaml @@ -0,0 +1,8 @@ +--- +features: + - | + Support for Redfish hardware is enabled by default for overcloud Ironic + via the ``redfish`` hardware type. + - | + Support changing enabled management and power interfaces for hardware types + in overcloud Ironic. diff --git a/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml b/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml new file mode 100644 index 00000000..7ab253b6 --- /dev/null +++ b/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml @@ -0,0 +1,6 @@ +--- +features: + - Added the ability to blacklist servers by name from being + associated with any Heat triggered SoftwareDeployment + resources. The servers are specified in the new + DeploymentServerBlacklist parameter. diff --git a/releasenotes/notes/service-role-name-0b8609d314564885.yaml b/releasenotes/notes/service-role-name-0b8609d314564885.yaml new file mode 100644 index 00000000..6c738084 --- /dev/null +++ b/releasenotes/notes/service-role-name-0b8609d314564885.yaml @@ -0,0 +1,4 @@ +--- +features: + - Role specific informations are added to the service template to enable + role specific decisions on the service. diff --git a/releasenotes/notes/snmp_listen-2364188f73d43b14.yaml b/releasenotes/notes/snmp_listen-2364188f73d43b14.yaml new file mode 100644 index 00000000..7cff9eec --- /dev/null +++ b/releasenotes/notes/snmp_listen-2364188f73d43b14.yaml @@ -0,0 +1,7 @@ +--- +features: + - | + Adding a new parameter to SNMP profile, SnmpdBindHost + so users can change the binding addresses on SNMP daemon. + The parameter is an array and takes the default value that + were previously hardcoded in puppet-tripleo. diff --git a/releasenotes/notes/sshd-service-extensions-0c4d0879942a2052.yaml b/releasenotes/notes/sshd-service-extensions-0c4d0879942a2052.yaml new file mode 100644 index 00000000..4cc01df8 --- /dev/null +++ b/releasenotes/notes/sshd-service-extensions-0c4d0879942a2052.yaml @@ -0,0 +1,5 @@ +--- +features: + - | + Added ability to manage MOTD Banner + Enabled SSHD composible service by default. Puppet-ssh manages the sshd config. diff --git a/releasenotes/notes/stack-name-input-73f4d4d052f1377e.yaml b/releasenotes/notes/stack-name-input-73f4d4d052f1377e.yaml new file mode 100644 index 00000000..2ccbee9c --- /dev/null +++ b/releasenotes/notes/stack-name-input-73f4d4d052f1377e.yaml @@ -0,0 +1,5 @@ +--- +fixes: + - The stack name can now be overridden in the get-occ-config.sh script + for deployed-server's by setting the $STACK_NAME variable in the + environment. diff --git a/releasenotes/notes/swap-prepuppet-and-postpuppet-to-preconfig-and-postconfig-debd5f28bc578d51.yaml b/releasenotes/notes/swap-prepuppet-and-postpuppet-to-preconfig-and-postconfig-debd5f28bc578d51.yaml new file mode 100644 index 00000000..875b704a --- /dev/null +++ b/releasenotes/notes/swap-prepuppet-and-postpuppet-to-preconfig-and-postconfig-debd5f28bc578d51.yaml @@ -0,0 +1,6 @@ +--- +fixes: + - This commit merges both [Pre|Post]Puppet and [Pre|Post]Config + resources, giving an agnostic name for the configuration + steps. The [Pre|Post]Puppet resource is removed and should not + be used anymore. diff --git a/releasenotes/notes/unset-ceph-default-min-size-0297620ed99dab5b.yaml b/releasenotes/notes/unset-ceph-default-min-size-0297620ed99dab5b.yaml new file mode 100644 index 00000000..fc2cb48a --- /dev/null +++ b/releasenotes/notes/unset-ceph-default-min-size-0297620ed99dab5b.yaml @@ -0,0 +1,12 @@ +--- +fixes: + - | + Removed the hard coding of osd_pool_default_min_size. Setting this value + to 1 can result in data loss in operating production deployments. Not + setting this value (or setting it to 0) will allow ceph to calculate the + value based on the current setting of osd_pool_default_size. If the + replication count is 3, then the calculated min_size is 2. If the + replication count is 1, then the calcualted min_size is 1. For a POC + deployments using a single OSD, set osd_pool_default_size = 1. See + description at http://docs.ceph.com/docs/master/rados/configuration/pool-pg-config-ref/ + Added CephPoolDefaultSize to set default replication size. Default value is 3. diff --git a/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml b/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml new file mode 100644 index 00000000..d74e3a18 --- /dev/null +++ b/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml @@ -0,0 +1,4 @@ +--- +fixes: + - Update the default metric processing delay to 30. This will help reduce + the metric backlog and wont load up the storage backend. diff --git a/releasenotes/notes/upgrade-stack-action-94598796a9d3511f.yaml b/releasenotes/notes/upgrade-stack-action-94598796a9d3511f.yaml new file mode 100644 index 00000000..bdff0e6e --- /dev/null +++ b/releasenotes/notes/upgrade-stack-action-94598796a9d3511f.yaml @@ -0,0 +1,9 @@ +--- +upgrade: + - | + The new StackUpdateType parameter is now set to UPGRADE + when a major version upgrade is in progress. This enables application + configuration via puppet to distinuish a major version upgrade from a + normal stack update (e.g for minor updates or reconfiguration) by + inspecting the stack_update_type hiera value. In future other values may be added to + flag e.g minor updates vs reconfiguration, but for now only UPGRADE is considered. diff --git a/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml b/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml new file mode 100644 index 00000000..b9ddaec4 --- /dev/null +++ b/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml @@ -0,0 +1,6 @@ +--- +issues: + - Modify ``NeutronVhostuserSocketDir`` to a seprate directory in the DPDK + environment file. A different set of permission is required for creating + vhost sockets when the vhost type is dpdkvhostuserclient (which is default + from ocata). diff --git a/releasenotes/notes/vpp-ml2-8e115f7763510531.yaml b/releasenotes/notes/vpp-ml2-8e115f7763510531.yaml new file mode 100644 index 00000000..2f8ae146 --- /dev/null +++ b/releasenotes/notes/vpp-ml2-8e115f7763510531.yaml @@ -0,0 +1,3 @@ +--- +features: + - Adds support for networking-vpp ML2 mechanism driver and agent. diff --git a/releasenotes/notes/zaqar-httpd-e7d91bf396da28d0.yaml b/releasenotes/notes/zaqar-httpd-e7d91bf396da28d0.yaml new file mode 100644 index 00000000..a2172aac --- /dev/null +++ b/releasenotes/notes/zaqar-httpd-e7d91bf396da28d0.yaml @@ -0,0 +1,3 @@ +--- +features: + - Run the Zaqar WSGI service over httpd in Puppet. diff --git a/releasenotes/source/conf.py b/releasenotes/source/conf.py index ec158ceb..72b89b10 100644 --- a/releasenotes/source/conf.py +++ b/releasenotes/source/conf.py @@ -52,7 +52,7 @@ copyright = u'2017, TripleO Developers' # built documents. # # The full version, including alpha/beta/rc tags. -release = '7.0.0.0b1' +release = '7.0.0.0b2' # The short X.Y version. version = '7.0.0' |