diff options
Diffstat (limited to 'releasenotes/notes')
17 files changed, 105 insertions, 0 deletions
diff --git a/releasenotes/notes/Introduce-ManageKeystoneFernetKeys-parameter-2478cf5fc5e64256.yaml b/releasenotes/notes/Introduce-ManageKeystoneFernetKeys-parameter-2478cf5fc5e64256.yaml new file mode 100644 index 00000000..64a4d7e7 --- /dev/null +++ b/releasenotes/notes/Introduce-ManageKeystoneFernetKeys-parameter-2478cf5fc5e64256.yaml @@ -0,0 +1,6 @@ +--- +features: + - This introduces the ManageKeystoneFernetKeys parameter, which tells + heat/puppet if it should replace the existing fernet keys on a stack + deployment or not. This is useful if the deployer wants to do key rotations + out of band. diff --git a/releasenotes/notes/Use-KeystoneFernetKeys-parameter-bd635a106bb8e00f.yaml b/releasenotes/notes/Use-KeystoneFernetKeys-parameter-bd635a106bb8e00f.yaml new file mode 100644 index 00000000..1e2673f1 --- /dev/null +++ b/releasenotes/notes/Use-KeystoneFernetKeys-parameter-bd635a106bb8e00f.yaml @@ -0,0 +1,10 @@ +--- +features: + - The KeystoneFernetKeys parameter was introduced, which is able to take any + amount of keys as long as it's in the right format. It's generated by the + same mechanism as the rest of the passwords; so it's value is also + available via mistral's "password" environment variable. This will also + allow for rotations to be made via mistral and via stack updates. +deprecations: + - The individual keystone fernet key parameters (KeystoneFernetKey0 and + KeystoneFernetKey1) were deprecated in favor of KeystoneFernetKeys. diff --git a/releasenotes/notes/add-cinder-nas-secure-parameters-53f9d6a6e9bc129b.yaml b/releasenotes/notes/add-cinder-nas-secure-parameters-53f9d6a6e9bc129b.yaml new file mode 100644 index 00000000..73b9f9c9 --- /dev/null +++ b/releasenotes/notes/add-cinder-nas-secure-parameters-53f9d6a6e9bc129b.yaml @@ -0,0 +1,5 @@ +--- +features: + - Add parameters to control the Cinder NAS security settings associated + with the NFS and NetApp Cinder back ends. The settings are disabled + by default. diff --git a/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml b/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml new file mode 100644 index 00000000..46f3b855 --- /dev/null +++ b/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml @@ -0,0 +1,6 @@ +--- +fixes: + - | + During a deployment on lower spec systems, the "db sync" can take longer + than five minutes. value of DatabaseSyncTimeout has change from 300 + to 900 at the environment file "low-memory-usage.yaml". diff --git a/releasenotes/notes/change-panko-api-port-fb8967420cd036b1.yaml b/releasenotes/notes/change-panko-api-port-fb8967420cd036b1.yaml new file mode 100644 index 00000000..353d16db --- /dev/null +++ b/releasenotes/notes/change-panko-api-port-fb8967420cd036b1.yaml @@ -0,0 +1,4 @@ +--- +fixes: + - Changed panko api port to run on 8977 instead of 8779. 8779 is reserved + for trove. Hence changing to avoid conflicts. diff --git a/releasenotes/notes/debug_per_service-54a260917c4a7e3a.yaml b/releasenotes/notes/debug_per_service-54a260917c4a7e3a.yaml new file mode 100644 index 00000000..da9af4a3 --- /dev/null +++ b/releasenotes/notes/debug_per_service-54a260917c4a7e3a.yaml @@ -0,0 +1,9 @@ +--- +features: + - | + Allow to configure debug per service. + The feature is backward compatible with existing Debug parameter. + Adding a new parameter per service, e.g. GlanceDebug. Set to False, + it will disable debug for the service, even if Debug is set to True. + If Debug is set to False but GlanceDebug is set to True, Glance debug + will be enabled. diff --git a/releasenotes/notes/derive-params-custom-plan-env-3a810ff58a68e0ad.yaml b/releasenotes/notes/derive-params-custom-plan-env-3a810ff58a68e0ad.yaml new file mode 100644 index 00000000..d8fcbfec --- /dev/null +++ b/releasenotes/notes/derive-params-custom-plan-env-3a810ff58a68e0ad.yaml @@ -0,0 +1,4 @@ +--- +features: + - Added a custom plan-environment file for providing workflow specific + inputs for the derived parameters workflow. diff --git a/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml b/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml new file mode 100644 index 00000000..4025477b --- /dev/null +++ b/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml @@ -0,0 +1,9 @@ +--- +other: + - | + All nodes now enable ``arp_accept`` sysctl setting to help with honoring + gratuitous ARP packets in their ARP tables. While sources of gratuitous ARP + packets are diverse, this comes especially useful for Neutron floating IP + addresses that roam between devices, and for which Neutron L3 agent sends + gratuitous ARP packets to update all network nodes about IP address new + locations. diff --git a/releasenotes/notes/example-roles-d27c748090f6a154.yaml b/releasenotes/notes/example-roles-d27c748090f6a154.yaml new file mode 100644 index 00000000..e27674da --- /dev/null +++ b/releasenotes/notes/example-roles-d27c748090f6a154.yaml @@ -0,0 +1,6 @@ +--- +features: + - | + A set of example roles has been created in the roles folder in + tripleo-heat-templates. Management of services for roles should occur + in these role files rather than in roles_data.yaml. diff --git a/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml b/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml new file mode 100644 index 00000000..88f67a03 --- /dev/null +++ b/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml @@ -0,0 +1,4 @@ +--- +other: + - Increased the default of NovaReservedHostMemory for + Compute nodes to 4096 MB. diff --git a/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml b/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml new file mode 100644 index 00000000..ae6401fb --- /dev/null +++ b/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml @@ -0,0 +1,7 @@ +--- +features: + - Move Mistral API to use mod_wsgi under Apache. +upgrade: + - Mistral API systemd service will be stopped and + disabled. + diff --git a/releasenotes/notes/num-storage-sacks-f640be5fcd374a6b.yaml b/releasenotes/notes/num-storage-sacks-f640be5fcd374a6b.yaml new file mode 100644 index 00000000..e5adb6a9 --- /dev/null +++ b/releasenotes/notes/num-storage-sacks-f640be5fcd374a6b.yaml @@ -0,0 +1,3 @@ +--- +features: + - Add support to configure number of sacks in gnocchi. diff --git a/releasenotes/notes/pre-network-config-role-specific-b36cc4bd6383e493.yaml b/releasenotes/notes/pre-network-config-role-specific-b36cc4bd6383e493.yaml new file mode 100644 index 00000000..95e9260b --- /dev/null +++ b/releasenotes/notes/pre-network-config-role-specific-b36cc4bd6383e493.yaml @@ -0,0 +1,11 @@ +--- +features: + - PreNetworkConfig is modified to support role-specific parameters. +upgrade: + - PreNetworkConfig takes a new parameter, RoleParameters. All the templates + associated with PreNetworkConfig should add this new parameter during + upgrade. +deprecations: + - Parameters {{role}}KernelArgs, {{role}}TunedProfileName and + {{role}}HostCpusList are deprecated. Alternatively, role-specific + parameter support has been added with the same names. diff --git a/releasenotes/notes/remove-ceilometer-cron-85362e197ba245a0.yaml b/releasenotes/notes/remove-ceilometer-cron-85362e197ba245a0.yaml new file mode 100644 index 00000000..7854fa5c --- /dev/null +++ b/releasenotes/notes/remove-ceilometer-cron-85362e197ba245a0.yaml @@ -0,0 +1,5 @@ +--- +upgrade: + - Ceilometer expirer is deprecated in pike. During upgrade, the crontab thats + configured with ceilometer user will be removed to ensure the expirer + script is not running. diff --git a/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml b/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml new file mode 100644 index 00000000..7ab253b6 --- /dev/null +++ b/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml @@ -0,0 +1,6 @@ +--- +features: + - Added the ability to blacklist servers by name from being + associated with any Heat triggered SoftwareDeployment + resources. The servers are specified in the new + DeploymentServerBlacklist parameter. diff --git a/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml b/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml new file mode 100644 index 00000000..d74e3a18 --- /dev/null +++ b/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml @@ -0,0 +1,4 @@ +--- +fixes: + - Update the default metric processing delay to 30. This will help reduce + the metric backlog and wont load up the storage backend. diff --git a/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml b/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml new file mode 100644 index 00000000..b9ddaec4 --- /dev/null +++ b/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml @@ -0,0 +1,6 @@ +--- +issues: + - Modify ``NeutronVhostuserSocketDir`` to a seprate directory in the DPDK + environment file. A different set of permission is required for creating + vhost sockets when the vhost type is dpdkvhostuserclient (which is default + from ocata). |