diff options
Diffstat (limited to 'releasenotes/notes')
18 files changed, 115 insertions, 0 deletions
diff --git a/releasenotes/notes/Disable-mongodb-by-default-cce37d3254a77d27.yaml b/releasenotes/notes/Disable-mongodb-by-default-cce37d3254a77d27.yaml new file mode 100644 index 00000000..e6e452f2 --- /dev/null +++ b/releasenotes/notes/Disable-mongodb-by-default-cce37d3254a77d27.yaml @@ -0,0 +1,8 @@ +--- +upgrade: + - Mongodb is no longer used by default, so now one has to enable it + explicitly if there's a need for using it. +other: + - Mongodb is not used by any service we enable by default, so it has been + removed from the default services. It has subsequently been added to the + services that use it (zaqar and ceilometer-collector). diff --git a/releasenotes/notes/add-cadf-environment-0ce0078348c5333f.yaml b/releasenotes/notes/add-cadf-environment-0ce0078348c5333f.yaml new file mode 100644 index 00000000..a45938b0 --- /dev/null +++ b/releasenotes/notes/add-cadf-environment-0ce0078348c5333f.yaml @@ -0,0 +1,7 @@ +--- +features: + - Add new cadf.yaml environment, that will configure + Keystone to emit CADF notifications. This standard + provides auditing capabilities for compliance with + security, and is intented to be used for deploying + TripleO with hardened security. diff --git a/releasenotes/notes/add-l2gw-agent-1a2f14a6ceefe362.yaml b/releasenotes/notes/add-l2gw-agent-1a2f14a6ceefe362.yaml new file mode 100644 index 00000000..7f88e269 --- /dev/null +++ b/releasenotes/notes/add-l2gw-agent-1a2f14a6ceefe362.yaml @@ -0,0 +1,3 @@ +--- +features: + - Add support for L2 Gateway Neutron agent diff --git a/releasenotes/notes/add-num-of-sacks-7bd6658474ddb14c.yaml b/releasenotes/notes/add-num-of-sacks-7bd6658474ddb14c.yaml new file mode 100644 index 00000000..e5adb6a9 --- /dev/null +++ b/releasenotes/notes/add-num-of-sacks-7bd6658474ddb14c.yaml @@ -0,0 +1,3 @@ +--- +features: + - Add support to configure number of sacks in gnocchi. diff --git a/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml b/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml new file mode 100644 index 00000000..46f3b855 --- /dev/null +++ b/releasenotes/notes/change-db-sync-timeout-57abe3e48d741842.yaml @@ -0,0 +1,6 @@ +--- +fixes: + - | + During a deployment on lower spec systems, the "db sync" can take longer + than five minutes. value of DatabaseSyncTimeout has change from 300 + to 900 at the environment file "low-memory-usage.yaml". diff --git a/releasenotes/notes/configurable-snmpd-options-3954c5858e2c7656.yaml b/releasenotes/notes/configurable-snmpd-options-3954c5858e2c7656.yaml new file mode 100644 index 00000000..d69bf4f6 --- /dev/null +++ b/releasenotes/notes/configurable-snmpd-options-3954c5858e2c7656.yaml @@ -0,0 +1,6 @@ +--- +features: + - | + Per default, don't log a message in syslog for each incoming SNMP query. + So set the default log level to '-LS0-5d'. Allow the operator to customize + the log level via a parameter. diff --git a/releasenotes/notes/debug_per_service-54a260917c4a7e3a.yaml b/releasenotes/notes/debug_per_service-54a260917c4a7e3a.yaml new file mode 100644 index 00000000..da9af4a3 --- /dev/null +++ b/releasenotes/notes/debug_per_service-54a260917c4a7e3a.yaml @@ -0,0 +1,9 @@ +--- +features: + - | + Allow to configure debug per service. + The feature is backward compatible with existing Debug parameter. + Adding a new parameter per service, e.g. GlanceDebug. Set to False, + it will disable debug for the service, even if Debug is set to True. + If Debug is set to False but GlanceDebug is set to True, Glance debug + will be enabled. diff --git a/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml b/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml new file mode 100644 index 00000000..4025477b --- /dev/null +++ b/releasenotes/notes/enable-arp_accept-6296b0113bc56b10.yaml @@ -0,0 +1,9 @@ +--- +other: + - | + All nodes now enable ``arp_accept`` sysctl setting to help with honoring + gratuitous ARP packets in their ARP tables. While sources of gratuitous ARP + packets are diverse, this comes especially useful for Neutron floating IP + addresses that roam between devices, and for which Neutron L3 agent sends + gratuitous ARP packets to update all network nodes about IP address new + locations. diff --git a/releasenotes/notes/example-roles-d27c748090f6a154.yaml b/releasenotes/notes/example-roles-d27c748090f6a154.yaml new file mode 100644 index 00000000..e27674da --- /dev/null +++ b/releasenotes/notes/example-roles-d27c748090f6a154.yaml @@ -0,0 +1,6 @@ +--- +features: + - | + A set of example roles has been created in the roles folder in + tripleo-heat-templates. Management of services for roles should occur + in these role files rather than in roles_data.yaml. diff --git a/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml b/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml new file mode 100644 index 00000000..88f67a03 --- /dev/null +++ b/releasenotes/notes/increase-nova-reserved-host-memory-80434e8484a29680.yaml @@ -0,0 +1,4 @@ +--- +other: + - Increased the default of NovaReservedHostMemory for + Compute nodes to 4096 MB. diff --git a/releasenotes/notes/match-enable_dvr-with-NeutronEnableDVR-fe8aac6c4ce52bce.yaml b/releasenotes/notes/match-enable_dvr-with-NeutronEnableDVR-fe8aac6c4ce52bce.yaml new file mode 100644 index 00000000..54400432 --- /dev/null +++ b/releasenotes/notes/match-enable_dvr-with-NeutronEnableDVR-fe8aac6c4ce52bce.yaml @@ -0,0 +1,6 @@ +--- +upgrade: + - | + Neutron API controller no longer advertises ``dvr`` extension if the + cloud is not configured for DVR. This is achieved by setting ``enable_dvr`` + to match ``NeutronEnableDVR`` setting. diff --git a/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml b/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml new file mode 100644 index 00000000..ae6401fb --- /dev/null +++ b/releasenotes/notes/mistral-mod-wsgi-24d41a6f427237ff.yaml @@ -0,0 +1,7 @@ +--- +features: + - Move Mistral API to use mod_wsgi under Apache. +upgrade: + - Mistral API systemd service will be stopped and + disabled. + diff --git a/releasenotes/notes/redfish-9203af1f7bf02bc5.yaml b/releasenotes/notes/redfish-9203af1f7bf02bc5.yaml new file mode 100644 index 00000000..8c24a22f --- /dev/null +++ b/releasenotes/notes/redfish-9203af1f7bf02bc5.yaml @@ -0,0 +1,8 @@ +--- +features: + - | + Support for Redfish hardware is enabled by default for overcloud Ironic + via the ``redfish`` hardware type. + - | + Support changing enabled management and power interfaces for hardware types + in overcloud Ironic. diff --git a/releasenotes/notes/remove-ceilometer-cron-85362e197ba245a0.yaml b/releasenotes/notes/remove-ceilometer-cron-85362e197ba245a0.yaml new file mode 100644 index 00000000..7854fa5c --- /dev/null +++ b/releasenotes/notes/remove-ceilometer-cron-85362e197ba245a0.yaml @@ -0,0 +1,5 @@ +--- +upgrade: + - Ceilometer expirer is deprecated in pike. During upgrade, the crontab thats + configured with ceilometer user will be removed to ensure the expirer + script is not running. diff --git a/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml b/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml new file mode 100644 index 00000000..7ab253b6 --- /dev/null +++ b/releasenotes/notes/server-blacklist-support-370c1a1f15a28a41.yaml @@ -0,0 +1,6 @@ +--- +features: + - Added the ability to blacklist servers by name from being + associated with any Heat triggered SoftwareDeployment + resources. The servers are specified in the new + DeploymentServerBlacklist parameter. diff --git a/releasenotes/notes/unset-ceph-default-min-size-0297620ed99dab5b.yaml b/releasenotes/notes/unset-ceph-default-min-size-0297620ed99dab5b.yaml new file mode 100644 index 00000000..fc2cb48a --- /dev/null +++ b/releasenotes/notes/unset-ceph-default-min-size-0297620ed99dab5b.yaml @@ -0,0 +1,12 @@ +--- +fixes: + - | + Removed the hard coding of osd_pool_default_min_size. Setting this value + to 1 can result in data loss in operating production deployments. Not + setting this value (or setting it to 0) will allow ceph to calculate the + value based on the current setting of osd_pool_default_size. If the + replication count is 3, then the calculated min_size is 2. If the + replication count is 1, then the calcualted min_size is 1. For a POC + deployments using a single OSD, set osd_pool_default_size = 1. See + description at http://docs.ceph.com/docs/master/rados/configuration/pool-pg-config-ref/ + Added CephPoolDefaultSize to set default replication size. Default value is 3. diff --git a/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml b/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml new file mode 100644 index 00000000..d74e3a18 --- /dev/null +++ b/releasenotes/notes/update-metric-delay-default-963d073026e2cc15.yaml @@ -0,0 +1,4 @@ +--- +fixes: + - Update the default metric processing delay to 30. This will help reduce + the metric backlog and wont load up the storage backend. diff --git a/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml b/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml new file mode 100644 index 00000000..b9ddaec4 --- /dev/null +++ b/releasenotes/notes/vhost_default_dir-cac327a0ac05df90.yaml @@ -0,0 +1,6 @@ +--- +issues: + - Modify ``NeutronVhostuserSocketDir`` to a seprate directory in the DPDK + environment file. A different set of permission is required for creating + vhost sockets when the vhost type is dpdkvhostuserclient (which is default + from ocata). |