diff options
Diffstat (limited to 'puppet/services')
56 files changed, 791 insertions, 50 deletions
diff --git a/puppet/services/README.rst b/puppet/services/README.rst index 34cb350b..9c2d8c5c 100644 --- a/puppet/services/README.rst +++ b/puppet/services/README.rst @@ -57,10 +57,14 @@ is a list of ansible tasks to be performed during the upgrade process. Similar to the step_config, we allow a series of steps for the per-service upgrade sequence, defined as ansible tasks with a tag e.g "step1" for the first -step, "step2" for the second, etc. Note that each step is performed in batches, -then we move on to the next step which is also performed in batches (we don't -perform all steps on one node, then move on to the next one which means you -can sequence rolling upgrades of dependent services via the step value). +step, "step2" for the second, etc (currently only two steps are supported, but +more may be added when required as additional services get converted to batched +upgrades). + +Note that each step is performed in batches, then we move on to the next step +which is also performed in batches (we don't perform all steps on one node, +then move on to the next one which means you can sequence rolling upgrades of +dependent services via the step value). The tasks performed at each step is service specific, but note that all batch upgrade steps are performed before the `upgrade_tasks` described below. This @@ -93,9 +97,9 @@ step, "step2" for the second, etc. 5) Perform any migration tasks, e.g DB sync commands - 6) Start control-plane services - - 7) Any additional online migration tasks (e.g data migrations) +Note that the services are not started in the upgrade tasks - we instead re-run +puppet which does any reconfiguration required for the new version, then starts +the services. Nova Server Metadata Settings ----------------------------- diff --git a/puppet/services/aodh-api.yaml b/puppet/services/aodh-api.yaml index 2c44f4df..62c4b093 100644 --- a/puppet/services/aodh-api.yaml +++ b/puppet/services/aodh-api.yaml @@ -85,3 +85,10 @@ outputs: include tripleo::profile::base::aodh::api metadata_settings: get_attr: [ApacheServiceBase, role_data, metadata_settings] + upgrade_tasks: + - name: Stop aodh_api service (running under httpd) + tags: step2 + service: name=httpd state=stopped + - name: Run aodh dbsync + tags: step5 + command: aodh-dbsync diff --git a/puppet/services/aodh-evaluator.yaml b/puppet/services/aodh-evaluator.yaml index 61f8c23f..56dbb558 100644 --- a/puppet/services/aodh-evaluator.yaml +++ b/puppet/services/aodh-evaluator.yaml @@ -40,3 +40,10 @@ outputs: get_attr: [AodhBase, role_data, config_settings] step_config: | include tripleo::profile::base::aodh::evaluator + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-aodh-evaluator is running" + shell: /usr/bin/systemctl show 'openstack-aodh-evaluator' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop aodh_evaluator service + tags: step2 + service: name=openstack-aodh-evaluator state=stopped diff --git a/puppet/services/aodh-listener.yaml b/puppet/services/aodh-listener.yaml index 715165b3..76db0ca8 100644 --- a/puppet/services/aodh-listener.yaml +++ b/puppet/services/aodh-listener.yaml @@ -40,3 +40,10 @@ outputs: get_attr: [AodhBase, role_data, config_settings] step_config: | include tripleo::profile::base::aodh::listener + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-aodh-listener is running" + shell: /usr/bin/systemctl show 'openstack-aodh-listener' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop aodh_listener service + tags: step2 + service: name=openstack-aodh-listener state=stopped diff --git a/puppet/services/aodh-notifier.yaml b/puppet/services/aodh-notifier.yaml index da85581b..30c67635 100644 --- a/puppet/services/aodh-notifier.yaml +++ b/puppet/services/aodh-notifier.yaml @@ -40,3 +40,10 @@ outputs: get_attr: [AodhBase, role_data, config_settings] step_config: | include tripleo::profile::base::aodh::notifier + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-aodh-notifier is running" + shell: /usr/bin/systemctl show 'openstack-aodh-notifier' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop aodh_notifier service + tags: step2 + service: name=openstack-aodh-notifier state=stopped diff --git a/puppet/services/apache-internal-tls-certmonger.yaml b/puppet/services/apache-internal-tls-certmonger.yaml index 97d6ff8e..4c21e02a 100644 --- a/puppet/services/apache-internal-tls-certmonger.yaml +++ b/puppet/services/apache-internal-tls-certmonger.yaml @@ -63,3 +63,7 @@ outputs: type: node for_each: $NETWORK: {get_attr: [ApacheNetworks, value]} + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service httpd is running" + shell: /usr/bin/systemctl show 'httpd' --property ActiveState | grep '\bactive\b' + tags: step0,validation diff --git a/puppet/services/apache.yaml b/puppet/services/apache.yaml index 82e0c5ff..74ddbde8 100644 --- a/puppet/services/apache.yaml +++ b/puppet/services/apache.yaml @@ -66,3 +66,7 @@ outputs: - "%{hiera('apache_remote_proxy_ips_network')}" metadata_settings: get_attr: [ApacheTLS, role_data, metadata_settings] + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service httpd is running" + shell: /usr/bin/systemctl show 'httpd' --property ActiveState | grep '\bactive\b' + tags: step0,validation diff --git a/puppet/services/auditd.yaml b/puppet/services/auditd.yaml new file mode 100644 index 00000000..639631e1 --- /dev/null +++ b/puppet/services/auditd.yaml @@ -0,0 +1,34 @@ +heat_template_version: ocata + +description: > + AuditD configured with Puppet + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + AuditdRules: + description: Mapping of auditd rules + type: json + default: {} + +outputs: + role_data: + description: Role data for the auditd service + value: + service_name: auditd + config_settings: + auditd::rules: {get_param: AuditdRules} + step_config: | + include ::tripleo::profile::base::auditd diff --git a/puppet/services/barbican-api.yaml b/puppet/services/barbican-api.yaml index 4e420750..186af1cc 100644 --- a/puppet/services/barbican-api.yaml +++ b/puppet/services/barbican-api.yaml @@ -146,3 +146,7 @@ outputs: get_param: [EndpointMap, KeystoneV3Internal, uri_no_suffix] metadata_settings: get_attr: [ApacheServiceBase, role_data, metadata_settings] + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-barbican-api is running" + shell: /usr/bin/systemctl show 'openstack-barbican-api' --property ActiveState | grep '\bactive\b' + tags: step0,validation diff --git a/puppet/services/ceilometer-agent-central.yaml b/puppet/services/ceilometer-agent-central.yaml index b9d8966c..cf8a8a8e 100644 --- a/puppet/services/ceilometer-agent-central.yaml +++ b/puppet/services/ceilometer-agent-central.yaml @@ -54,3 +54,10 @@ outputs: - ceilometer_redis_password: {get_param: RedisPassword} step_config: | include ::tripleo::profile::base::ceilometer::agent::central + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-ceilometer-central is running" + shell: /usr/bin/systemctl show 'openstack-ceilometer-central' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop ceilometer_agent_central service + tags: step2 + service: name=openstack-ceilometer-central state=stopped diff --git a/puppet/services/ceilometer-agent-compute.yaml b/puppet/services/ceilometer-agent-compute.yaml index b666b86b..00042914 100644 --- a/puppet/services/ceilometer-agent-compute.yaml +++ b/puppet/services/ceilometer-agent-compute.yaml @@ -48,3 +48,10 @@ outputs: - ceilometer::agent::compute::instance_discovery_method: {get_param: InstanceDiscoveryMethod} step_config: | include ::tripleo::profile::base::ceilometer::agent::compute + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-ceilometer-compute is running" + shell: /usr/bin/systemctl show 'openstack-ceilometer-compute' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop ceilometer_agent_compute service + tags: step2 + service: name=openstack-ceilometer-compute state=stopped diff --git a/puppet/services/ceilometer-agent-notification.yaml b/puppet/services/ceilometer-agent-notification.yaml index 9c9a3bd9..760acd65 100644 --- a/puppet/services/ceilometer-agent-notification.yaml +++ b/puppet/services/ceilometer-agent-notification.yaml @@ -49,3 +49,10 @@ outputs: get_attr: [CeilometerServiceBase, role_data, config_settings] step_config: | include ::tripleo::profile::base::ceilometer::agent::notification + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-ceilometer-notification is running" + shell: /usr/bin/systemctl show 'openstack-ceilometer-notification' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop ceilometer_agent_notification service + tags: step2 + service: name=openstack-ceilometer-notification state=stopped diff --git a/puppet/services/ceilometer-api.yaml b/puppet/services/ceilometer-api.yaml index f774167f..741f8da1 100644 --- a/puppet/services/ceilometer-api.yaml +++ b/puppet/services/ceilometer-api.yaml @@ -92,3 +92,7 @@ outputs: include ::tripleo::profile::base::ceilometer::api metadata_settings: get_attr: [ApacheServiceBase, role_data, metadata_settings] + upgrade_tasks: + - name: Stop ceilometer_api service (running under httpd) + tags: step2 + service: name=httpd state=stopped diff --git a/puppet/services/ceilometer-collector.yaml b/puppet/services/ceilometer-collector.yaml index 88e7d781..a219f9eb 100644 --- a/puppet/services/ceilometer-collector.yaml +++ b/puppet/services/ceilometer-collector.yaml @@ -59,3 +59,10 @@ outputs: get_attr: [CeilometerServiceBase, role_data, service_config_settings] step_config: | include ::tripleo::profile::base::ceilometer::collector + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-ceilometer-collector is running" + shell: /usr/bin/systemctl show 'openstack-ceilometer-collector' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop ceilometer_collector service + tags: step2 + service: name=openstack-ceilometer-collector state=stopped diff --git a/puppet/services/ceilometer-expirer.yaml b/puppet/services/ceilometer-expirer.yaml index 714434b1..5341cfee 100644 --- a/puppet/services/ceilometer-expirer.yaml +++ b/puppet/services/ceilometer-expirer.yaml @@ -40,3 +40,7 @@ outputs: get_attr: [CeilometerServiceBase, role_data, config_settings] step_config: | include ::tripleo::profile::base::ceilometer::expirer + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-ceilometer-expirer is running" + shell: /usr/bin/systemctl show 'openstack-ceilometer-expirer' --property ActiveState | grep '\bactive\b' + tags: step0,validation diff --git a/puppet/services/ceph-mon.yaml b/puppet/services/ceph-mon.yaml index 0c61305d..1ce58335 100644 --- a/puppet/services/ceph-mon.yaml +++ b/puppet/services/ceph-mon.yaml @@ -117,6 +117,9 @@ outputs: # Note we perform these tasks in list order, but they are all step0 so # we can perform a rolling upgrade of all mon nodes in step0, then a # rolling upgrade of all osd nodes in step1 + - name: Check status + tags: step0,validation + shell: ceph health | grep -qv HEALTH_ERR # FIXME(shardy) I suspect we can use heat or ansible facts here instead? - name: Get hostname tags: step0 @@ -127,7 +130,7 @@ outputs: service: name=ceph-mon@{{mon_id.stdout}} pattern=ceph-mon state=stopped - name: Update ceph packages tags: step0 - yum: name=ceph-mon,ceph state=latest + yum: name=ceph-mon state=latest - name: Start ceph-mon service tags: step0 service: name=ceph-mon@{{mon_id.stdout}} state=started diff --git a/puppet/services/ceph-osd.yaml b/puppet/services/ceph-osd.yaml index e9ed6c29..9bd83aab 100644 --- a/puppet/services/ceph-osd.yaml +++ b/puppet/services/ceph-osd.yaml @@ -46,6 +46,9 @@ outputs: step_config: | include ::tripleo::profile::base::ceph::osd upgrade_batch_tasks: + - name: Check status + tags: step1,validation + shell: ceph health | grep -qv HEALTH_ERR - name: Get OSD IDs tags: step1 shell: ls /var/lib/ceph/osd | awk 'BEGIN { FS = "-" } ; { print $2 }' @@ -65,14 +68,14 @@ outputs: command: ceph osd set noscrub - name: Stop Ceph OSD tags: step1 - service: name=ceph-osd@$item state=stopped + service: name=ceph-osd@{{ item }} state=stopped with_items: "{{osd_ids.stdout.strip().split()}}" - name: Update ceph OSD packages tags: step1 yum: name=ceph-osd state=latest - name: Start ceph-osd service tags: step1 - service: name=ceph-osd@$item state=started + service: name=ceph-osd@{{ item }} state=started with_items: "{{osd_ids.stdout.strip().split()}}" - name: ceph osd unset noout tags: step1 diff --git a/puppet/services/ceph-rgw.yaml b/puppet/services/ceph-rgw.yaml index 92536994..83339f2b 100644 --- a/puppet/services/ceph-rgw.yaml +++ b/puppet/services/ceph-rgw.yaml @@ -77,3 +77,14 @@ outputs: ceph::rgw::keystone::auth::tenant: service ceph::rgw::keystone::auth::user: swift ceph::rgw::keystone::auth::password: {get_param: SwiftPassword} + upgrade_tasks: + - name: Gather RGW instance ID + tags: step0 + shell: hiera -c /etc/puppet/hiera.yaml ceph::profile::params::rgw_name radosgw.gateway + register: rgw_id + - name: Check status + shell: /usr/bin/systemctl show ceph-radosgw@{{rgw_id.stdout}} --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop RGW instance + tags: step1 + service: name=ceph-radosgw@{{rgw_id.stdout}} state=stopped diff --git a/puppet/services/cinder-api.yaml b/puppet/services/cinder-api.yaml index e3c96325..bc5f080d 100644 --- a/puppet/services/cinder-api.yaml +++ b/puppet/services/cinder-api.yaml @@ -149,7 +149,7 @@ outputs: metadata_settings: get_attr: [ApacheServiceBase, role_data, metadata_settings] upgrade_tasks: - - name: "PreUpgrade step0: Check service openstack-cinder-api is running" + - name: "PreUpgrade step0,validation: Check service openstack-cinder-api is running" shell: /usr/bin/systemctl show 'openstack-cinder-api' --property ActiveState | grep '\bactive\b' tags: step0,validation - name: check for cinder running under apache (post upgrade) diff --git a/puppet/services/cinder-backend-dellps.yaml b/puppet/services/cinder-backend-dellps.yaml new file mode 100644 index 00000000..1f15c53e --- /dev/null +++ b/puppet/services/cinder-backend-dellps.yaml @@ -0,0 +1,85 @@ +# Copyright (c) 2017 Dell Inc. or its subsidiaries. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +heat_template_version: ocata + +description: > + Openstack Cinder Dell EMC PS Series backend + +parameters: + CinderEnableDellPsBackend: + type: boolean + default: true + CinderDellPsBackendName: + type: string + default: 'tripleo_dellps' + CinderDellPsSanIp: + type: string + CinderDellPsSanLogin: + type: string + CinderDellPsSanPassword: + type: string + hidden: true + CinderDellPsSanThinProvision: + type: boolean + default: true + CinderDellPsGroupname: + type: string + default: 'group-0' + CinderDellPsPool: + type: string + default: 'default' + CinderDellPsChapLogin: + type: string + default: '' + CinderDellPsChapPassword: + type: string + default: '' + CinderDellPsUseChap: + type: boolean + default: false + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + type: json + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + +outputs: + role_data: + description: Role data for the Cinder Dell EMC PS Series backend. + value: + service_name: cinder_backend_dellps + config_settings: + tripleo::profile::base::cinder::volume::cinder_enable_dellps_backend: {get_param: CinderEnableDellPsBackend} + cinder::backend::eqlx::volume_backend_name: {get_param: CinderDellPsBackendName} + cinder::backend::eqlx::san_ip: {get_param: CinderDellPsSanIp} + cinder::backend::eqlx::san_login: {get_param: CinderDellPsSanLogin} + cinder::backend::eqlx::san_password: {get_param: CinderDellPsSanPassword} + cinder::backend::eqlx::san_thin_provision: {get_param: CinderDellPsSanThinProvision} + cinder::backend::eqlx::eqlx_group_name: {get_param: CinderDellPsGroupname} + cinder::backend::eqlx::eqlx_pool: {get_param: CinderDellPsPool} + cinder::backend::eqlx::eqlx_use_chap: {get_param: CinderDellPsUseChap} + cinder::backend::eqlx::eqlx_chap_login: {get_param: CinderDellPsChapLogin} + cinder::backend::eqlx::eqlx_chap_password: {get_param: CinderDellPsChapPassword} + step_config: | + include ::tripleo::profile::base::cinder::volume diff --git a/puppet/services/cinder-scheduler.yaml b/puppet/services/cinder-scheduler.yaml index 6a0b1f24..f102810e 100644 --- a/puppet/services/cinder-scheduler.yaml +++ b/puppet/services/cinder-scheduler.yaml @@ -52,6 +52,9 @@ outputs: step_config: | include ::tripleo::profile::base::cinder::scheduler upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-cinder-scheduler is running" + shell: /usr/bin/systemctl show 'openstack-cinder-scheduler' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop cinder_scheduler service tags: step2 service: name=openstack-cinder-scheduler state=stopped diff --git a/puppet/services/cinder-volume.yaml b/puppet/services/cinder-volume.yaml index 8834eaa5..dd1d3833 100644 --- a/puppet/services/cinder-volume.yaml +++ b/puppet/services/cinder-volume.yaml @@ -116,6 +116,9 @@ outputs: step_config: | include ::tripleo::profile::base::cinder::volume upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-cinder-volume is running" + shell: /usr/bin/systemctl show 'openstack-cinder-volume' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop cinder_volume service tags: step2 service: name=openstack-cinder-volume state=stopped diff --git a/puppet/services/database/mongodb.yaml b/puppet/services/database/mongodb.yaml index 8290cae7..63ec4446 100644 --- a/puppet/services/database/mongodb.yaml +++ b/puppet/services/database/mongodb.yaml @@ -66,3 +66,10 @@ outputs: mongodb::server::bind_ip: {get_param: [ServiceNetMap, MongodbNetwork]} step_config: | include ::tripleo::profile::base::database::mongodb + upgrade_tasks: + - name: Stop mongodb service + tags: step2 + service: name=mongod state=stopped + - name: Start mongodb service + tags: step4 + service: name=mongod state=started diff --git a/puppet/services/glance-api.yaml b/puppet/services/glance-api.yaml index 09ea5d22..b49b29f7 100644 --- a/puppet/services/glance-api.yaml +++ b/puppet/services/glance-api.yaml @@ -138,6 +138,9 @@ outputs: service_config_settings: get_attr: [GlanceBase, role_data, service_config_settings] upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-glance-api is running" + shell: /usr/bin/systemctl show 'openstack-glance-api' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop glance_api service tags: step2 service: name=openstack-glance-api state=stopped diff --git a/puppet/services/gnocchi-api.yaml b/puppet/services/gnocchi-api.yaml index ae384ce0..2a1ed2a3 100644 --- a/puppet/services/gnocchi-api.yaml +++ b/puppet/services/gnocchi-api.yaml @@ -103,12 +103,6 @@ outputs: # internal_api_subnet - > IP/CIDR gnocchi::wsgi::apache::bind_host: {get_param: [ServiceNetMap, GnocchiApiNetwork]} gnocchi::wsgi::apache::wsgi_process_display_name: 'gnocchi_wsgi' - gnocchi::api::host: - str_replace: - template: - "%{hiera('fqdn_$NETWORK')}" - params: - $NETWORK: {get_param: [ServiceNetMap, GnocchiApiNetwork]} gnocchi::api::keystone_auth_uri: {get_param: [EndpointMap, KeystoneInternal, uri]} gnocchi::api::keystone_identity_uri: {get_param: [EndpointMap, KeystoneAdmin, uri_no_suffix]} @@ -133,3 +127,10 @@ outputs: - "%{hiera('mysql_bind_host')}" metadata_settings: get_attr: [ApacheServiceBase, role_data, metadata_settings] + upgrade_tasks: + - name: Stop gnocchi_api service (running under httpd) + tags: step2 + service: name=httpd state=stopped + - name: Run gnocchi upgrade + tags: step5 + command: gnocchi-upgrade diff --git a/puppet/services/gnocchi-base.yaml b/puppet/services/gnocchi-base.yaml index d92b1766..8fddae4b 100644 --- a/puppet/services/gnocchi-base.yaml +++ b/puppet/services/gnocchi-base.yaml @@ -69,7 +69,7 @@ outputs: - '/gnocchi' - '?bind_address=' - "%{hiera('tripleo::profile::base::database::mysql::client_bind_address')}" - gnocchi::db::sync::extra_opts: '--skip-storage --create-legacy-resource-types' + gnocchi::db::sync::extra_opts: '--skip-storage' gnocchi::storage::swift::swift_user: 'service:gnocchi' gnocchi::storage::swift::swift_auth_version: 2 gnocchi::storage::swift::swift_key: {get_param: GnocchiPassword} diff --git a/puppet/services/gnocchi-metricd.yaml b/puppet/services/gnocchi-metricd.yaml index 27700606..1337b0cb 100644 --- a/puppet/services/gnocchi-metricd.yaml +++ b/puppet/services/gnocchi-metricd.yaml @@ -46,3 +46,10 @@ outputs: - gnocchi::metricd::workers: {get_param: GnocchiMetricdWorkers} step_config: | include ::tripleo::profile::base::gnocchi::metricd + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-gnocchi-metricd is running" + shell: /usr/bin/systemctl show 'openstack-gnocchi-metricd' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop gnocchi_metricd service + tags: step2 + service: name=openstack-gnocchi-metricd state=stopped diff --git a/puppet/services/gnocchi-statsd.yaml b/puppet/services/gnocchi-statsd.yaml index df438b37..41222a79 100644 --- a/puppet/services/gnocchi-statsd.yaml +++ b/puppet/services/gnocchi-statsd.yaml @@ -45,3 +45,10 @@ outputs: proto: 'udp' step_config: | include ::tripleo::profile::base::gnocchi::statsd + upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-gnocchi-statsd is running" + shell: /usr/bin/systemctl show 'openstack-gnocchi-statsd' --property ActiveState | grep '\bactive\b' + tags: step0,validation + - name: Stop gnocchi_statsd service + tags: step2 + service: name=openstack-gnocchi-statsd state=stopped diff --git a/puppet/services/haproxy.yaml b/puppet/services/haproxy.yaml index 981a08d2..358698dd 100644 --- a/puppet/services/haproxy.yaml +++ b/puppet/services/haproxy.yaml @@ -78,6 +78,9 @@ outputs: step_config: | include ::tripleo::profile::base::haproxy upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service haproxy is running" + shell: /usr/bin/systemctl show 'haproxy' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop haproxy service tags: step1 service: name=haproxy state=stopped diff --git a/puppet/services/heat-api-cfn.yaml b/puppet/services/heat-api-cfn.yaml index 28317dd3..7bd2fcf1 100644 --- a/puppet/services/heat-api-cfn.yaml +++ b/puppet/services/heat-api-cfn.yaml @@ -85,6 +85,9 @@ outputs: heat::keystone::auth_cfn::password: {get_param: HeatPassword} heat::keystone::auth_cfn::region: {get_param: KeystoneRegion} upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-heat-api-cfn is running" + shell: echo o/ #TODO uncomment when /#/c/423302/ : /usr/bin/systemctl show 'openstack-heat-api-cfn' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop heat_api_cfn service tags: step2 service: name=openstack-heat-api-cfn state=stopped diff --git a/puppet/services/heat-api-cloudwatch.yaml b/puppet/services/heat-api-cloudwatch.yaml index 5de25ab8..0954ad19 100644 --- a/puppet/services/heat-api-cloudwatch.yaml +++ b/puppet/services/heat-api-cloudwatch.yaml @@ -67,6 +67,9 @@ outputs: step_config: | include ::tripleo::profile::base::heat::api_cloudwatch upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-heat-api-cloudwatch is running" + shell: echo o/ #TODO uncomment when /#/c/423302/ : /usr/bin/systemctl show 'openstack-heat-api-cloudwatch' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop heat_api_cloudwatch service tags: step2 service: name=openstack-heat-api-cloudwatch state=stopped diff --git a/puppet/services/heat-api.yaml b/puppet/services/heat-api.yaml index 0ce8e1fa..ae656b1e 100644 --- a/puppet/services/heat-api.yaml +++ b/puppet/services/heat-api.yaml @@ -85,6 +85,9 @@ outputs: heat::keystone::auth::password: {get_param: HeatPassword} heat::keystone::auth::region: {get_param: KeystoneRegion} upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-heat-api is running" + shell: echo o/ #TODO uncomment when /#/c/423302/ : /usr/bin/systemctl show 'openstack-heat-api' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop heat_api service tags: step2 service: name=openstack-heat-api state=stopped diff --git a/puppet/services/heat-engine.yaml b/puppet/services/heat-engine.yaml index 976d413c..3b73eb88 100644 --- a/puppet/services/heat-engine.yaml +++ b/puppet/services/heat-engine.yaml @@ -138,6 +138,9 @@ outputs: # This is needed because the keystone profile handles creating the domain tripleo::profile::base::keystone::heat_admin_password: {get_param: HeatStackDomainAdminPassword} upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service openstack-heat-engine is running" + shell: echo o/ #TODO uncomment when /#/c/423302/ : /usr/bin/systemctl show 'openstack-heat-engine' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop heat_engine service tags: step2 service: name=openstack-heat-engine state=stopped diff --git a/puppet/services/ironic-api.yaml b/puppet/services/ironic-api.yaml index ff91eb63..bc34b736 100644 --- a/puppet/services/ironic-api.yaml +++ b/puppet/services/ironic-api.yaml @@ -25,6 +25,10 @@ parameters: MonitoringSubscriptionIronicApi: default: 'overcloud-ironic-api' type: string + KeystoneRegion: + type: string + default: 'regionOne' + description: Keystone region for endpoint resources: IronicBase: @@ -73,6 +77,7 @@ outputs: ironic::keystone::auth::auth_name: 'ironic' ironic::keystone::auth::password: {get_param: IronicPassword } ironic::keystone::auth::tenant: 'service' + ironic::keystone::auth::region: {get_param: KeystoneRegion} mysql: ironic::db::mysql::password: {get_param: IronicPassword} ironic::db::mysql::user: ironic diff --git a/puppet/services/ironic-conductor.yaml b/puppet/services/ironic-conductor.yaml index a10c03a5..48d87209 100644 --- a/puppet/services/ironic-conductor.yaml +++ b/puppet/services/ironic-conductor.yaml @@ -24,6 +24,14 @@ parameters: "full" for full cleaning, "metadata" to clean only disk metadata (partition table). type: string + IronicCleaningNetwork: + default: 'provisioning' + description: Name or UUID of the *overcloud* network used for cleaning + bare metal nodes. The default value of "provisioning" can be + left during the initial deployment (when no networks are + created yet) and should be changed to an actual UUID in + a post-deployment stack update. + type: string IronicEnabledDrivers: default: ['pxe_ipmitool', 'pxe_drac', 'pxe_ilo'] description: Enabled Ironic drivers @@ -61,6 +69,7 @@ outputs: - ironic::api::neutron_url: {get_param: [EndpointMap, NeutronInternal, uri]} ironic::conductor::api_url: {get_param: [EndpointMap, IronicInternal, uri_no_suffix]} ironic::conductor::cleaning_disk_erase: {get_param: IronicCleaningDiskErase} + ironic::conductor::cleaning_network: {get_param: IronicCleaningNetwork} ironic::conductor::enabled_drivers: {get_param: IronicEnabledDrivers} # We need an endpoint containing a real IP, not a VIP here ironic_conductor_http_host: {get_param: [ServiceNetMap, IronicNetwork]} diff --git a/puppet/services/keystone.yaml b/puppet/services/keystone.yaml index b989d502..7da4a9c2 100644 --- a/puppet/services/keystone.yaml +++ b/puppet/services/keystone.yaml @@ -313,8 +313,5 @@ outputs: - name: Sync keystone DB tags: step5 command: keystone-manage db_sync - - name: Start keystone service (running under httpd) - tags: step6 - service: name=httpd state=started metadata_settings: get_attr: [ApacheServiceBase, role_data, metadata_settings] diff --git a/puppet/services/memcached.yaml b/puppet/services/memcached.yaml index ffa969e0..eba8a58b 100644 --- a/puppet/services/memcached.yaml +++ b/puppet/services/memcached.yaml @@ -40,3 +40,11 @@ outputs: dport: 11211 step_config: | include ::tripleo::profile::base::memcached + service_config_settings: + collectd: + tripleo.collectd.plugins.memcached: + - memcached + collectd::plugin::memcached::instances: + local: + host: "%{hiera('memcached::listen_ip')}" + port: 11211 diff --git a/puppet/services/metrics/collectd.yaml b/puppet/services/metrics/collectd.yaml new file mode 100644 index 00000000..e4e7dac7 --- /dev/null +++ b/puppet/services/metrics/collectd.yaml @@ -0,0 +1,111 @@ +heat_template_version: ocata + +description: Collectd client service + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + DefaultPasswords: + default: {} + type: json + CollectdDefaultPlugins: + default: + - disk + - interface + - load + - memory + - processes + - tcpconns + type: comma_delimited_list + description: > + List of collectd plugins to activate on all overcloud hosts. See + the documentation for the puppet-collectd module for a list plugins + supported by the module (https://github.com/voxpupuli/puppet-collectd). + Set this key to override the default list of plugins. Use + CollectdExtraPlugins if you want to load additional plugins without + overriding the defaults. + CollectdExtraPlugins: + default: [] + type: comma_delimited_list + description: > + List of collectd plugins to activate on all overcloud hosts. See + the documentation for the puppet-collectd module for a list plugins + supported by the module (https://github.com/voxpupuli/puppet-collectd). + Set this key to load plugins in addition to those in + CollectdDefaultPlugins. + CollectdServer: + type: string + description: > + Address of remote collectd server to which we will send + metrics. + default: '' + CollectdServerPort: + type: number + default: 25826 + description: > + Port on remote collectd server to which we will send + metrics. + CollectdUsername: + type: string + description: > + Username for authenticating to the remote collectd server. The default + is to not configure any authentication. + default: '' + CollectdPassword: + type: string + hidden: true + description: > + Password for authenticating to the remote collectd server. The + default is to not configure any authentication. + default: '' + CollectdSecurityLevel: + type: string + description: > + Security level setting for remote collectd connection. + default: 'None' + constraints: + - allowed_values: + - None + - Sign + - Encrypt + +outputs: + role_data: + description: Role data for the Collectd client role. + value: + service_name: collectd + config_settings: + collectd::manage_repo: false + collectd::purge: true + collectd::recurse: true + collectd::purge_config: true + collectd::minimum_version: "5.7" + tripleo::profile::base::metrics::collectd::collectd_server: + get_param: CollectdServer + tripleo::profile::base::metrics::collectd::collectd_port: + get_param: CollectdServerPort + tripleo::profile::base::metrics::collectd::collectd_username: + get_param: CollectdUsername + tripleo::profile::base::metrics::collectd::collectd_password: + get_param: CollectdPassword + tripleo::profile::base::metrics::collectd::collectd_securitylevel: + get_param: CollectdSecurityLevel + tripleo.collectd.plugins.collectd: + yaql: + data: + default_plugins: {get_param: CollectdDefaultPlugins} + extra_plugins: {get_param: CollectdExtraPlugins} + expression: > + ($.data.default_plugins + $.data.extra_plugins) + .flatten().distinct() + step_config: | + include ::tripleo::profile::base::metrics::collectd diff --git a/puppet/services/neutron-api.yaml b/puppet/services/neutron-api.yaml index cf444215..65fa0d8f 100644 --- a/puppet/services/neutron-api.yaml +++ b/puppet/services/neutron-api.yaml @@ -71,6 +71,9 @@ parameters: removed in Ocata. Future releases will enable L3 HA by default if it is appropriate for the deployment type. Alternate mechanisms will be available to override. + EnableInternalTLS: + type: boolean + default: false parameter_groups: - label: deprecated @@ -82,8 +85,19 @@ parameter_groups: parameters: - NeutronL3HA +conditions: + use_tls_proxy: {equals : [{get_param: EnableInternalTLS}, true]} + resources: + TLSProxyBase: + type: OS::TripleO::Services::TLSProxyBase + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + EnableInternalTLS: {get_param: EnableInternalTLS} + NeutronBase: type: ./neutron-base.yaml properties: @@ -103,6 +117,7 @@ outputs: config_settings: map_merge: - get_attr: [NeutronBase, role_data, config_settings] + - get_attr: [TLSProxyBase, role_data, config_settings] - neutron::server::database_connection: list_join: - '' @@ -140,7 +155,23 @@ outputs: # internal_api -> IP # internal_api_uri -> [IP] # internal_api_subnet - > IP/CIDR - neutron::bind_host: {get_param: [ServiceNetMap, NeutronApiNetwork]} + tripleo::profile::base::neutron::server::tls_proxy_bind_ip: + get_param: [ServiceNetMap, NeutronApiNetwork] + tripleo::profile::base::neutron::server::tls_proxy_fqdn: + str_replace: + template: + "%{hiera('fqdn_$NETWORK')}" + params: + $NETWORK: {get_param: [ServiceNetMap, NeutronApiNetwork]} + tripleo::profile::base::neutron::server::tls_proxy_port: + get_param: [EndpointMap, NeutronInternal, port] + # Bind to localhost if internal TLS is enabled, since we put a TLS + # proxy in front. + neutron::bind_host: + if: + - use_tls_proxy + - 'localhost' + - {get_param: [ServiceNetMap, NeutronApiNetwork]} tripleo::profile::base::neutron::server::l3_ha_override: {get_param: NeutronL3HA} step_config: | include tripleo::profile::base::neutron::server @@ -161,6 +192,9 @@ outputs: - '%' - "%{hiera('mysql_bind_host')}" upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service neutron-server is running" + shell: /usr/bin/systemctl show 'neutron-server' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop neutron_api service tags: step2 service: name=neutron-server state=stopped diff --git a/puppet/services/neutron-dhcp.yaml b/puppet/services/neutron-dhcp.yaml index bb4742c9..062edaa4 100644 --- a/puppet/services/neutron-dhcp.yaml +++ b/puppet/services/neutron-dhcp.yaml @@ -80,6 +80,9 @@ outputs: step_config: | include tripleo::profile::base::neutron::dhcp upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service neutron-dhcp-agent is running" + shell: /usr/bin/systemctl show 'neutron-dhcp-agent' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop neutron_dhcp service tags: step2 service: name=neutron-dhcp-agent state=stopped diff --git a/puppet/services/neutron-l3.yaml b/puppet/services/neutron-l3.yaml index 9d858441..69803551 100644 --- a/puppet/services/neutron-l3.yaml +++ b/puppet/services/neutron-l3.yaml @@ -80,6 +80,9 @@ outputs: step_config: | include tripleo::profile::base::neutron::l3 upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service neutron-l3-agent is running" + shell: /usr/bin/systemctl show 'neutron-l3-agent' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop neutron_l3 service tags: step2 service: name=neutron-l3-agent state=stopped diff --git a/puppet/services/neutron-metadata.yaml b/puppet/services/neutron-metadata.yaml index 43066767..199b5809 100644 --- a/puppet/services/neutron-metadata.yaml +++ b/puppet/services/neutron-metadata.yaml @@ -76,6 +76,9 @@ outputs: step_config: | include tripleo::profile::base::neutron::metadata upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service neutron-metadata-agent is running" + shell: /usr/bin/systemctl show 'neutron-metadata-agent' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop neutron_metadata service tags: step2 service: name=neutron-metadata-agent state=stopped diff --git a/puppet/services/neutron-ovs-agent.yaml b/puppet/services/neutron-ovs-agent.yaml index baeb0c66..c27bb909 100644 --- a/puppet/services/neutron-ovs-agent.yaml +++ b/puppet/services/neutron-ovs-agent.yaml @@ -121,6 +121,9 @@ outputs: step_config: | include ::tripleo::profile::base::neutron::ovs upgrade_tasks: + - name: "PreUpgrade step0,validation: Check service neutron-openvswitch-agent is running" + shell: /usr/bin/systemctl show 'neutron-openvswitch-agent' --property ActiveState | grep '\bactive\b' + tags: step0,validation - name: Stop neutron_ovs_agent service tags: step2 service: name=neutron-openvswitch-agent state=stopped diff --git a/puppet/services/neutron-ovs-dpdk-agent.yaml b/puppet/services/neutron-ovs-dpdk-agent.yaml index 5c77e35d..e25bc495 100644 --- a/puppet/services/neutron-ovs-dpdk-agent.yaml +++ b/puppet/services/neutron-ovs-dpdk-agent.yaml @@ -18,6 +18,11 @@ parameters: description: Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. type: json + HostCpusList: + description: List of cores to be used for host process + type: string + constraints: + - allowed_pattern: "'[0-9,-]+'" NeutronDpdkCoreList: description: List of cores to be used for DPDK Poll Mode Driver type: string @@ -68,7 +73,8 @@ outputs: - neutron::agents::ml2::ovs::enable_dpdk: true neutron::agents::ml2::ovs::datapath_type: {get_param: NeutronDatapathType} neutron::agents::ml2::ovs::vhostuser_socket_dir: {get_param: NeutronVhostuserSocketDir} - vswitch::dpdk::core_list: {get_param: NeutronDpdkCoreList} + vswitch::dpdk::host_core_list: {get_param: HostCpusList} + vswitch::dpdk::pmd_core_list: {get_param: NeutronDpdkCoreList} vswitch::dpdk::memory_channels: {get_param: NeutronDpdkMemoryChannels} vswitch::dpdk::socket_mem: {get_param: NeutronDpdkSocketMemory} vswitch::dpdk::driver_type: {get_param: NeutronDpdkDriverType} diff --git a/puppet/services/neutron-plugin-ml2.yaml b/puppet/services/neutron-plugin-ml2.yaml index 407ce6ba..71a0076f 100644 --- a/puppet/services/neutron-plugin-ml2.yaml +++ b/puppet/services/neutron-plugin-ml2.yaml @@ -95,3 +95,6 @@ outputs: step_config: | include ::tripleo::profile::base::neutron::plugins::ml2 + service_config_settings: + horizon: + neutron::plugins::ml2::mechanism_drivers: {get_param: NeutronMechanismDrivers} diff --git a/puppet/services/nova-api.yaml b/puppet/services/nova-api.yaml index 892e63dd..0c5f3afe 100644 --- a/puppet/services/nova-api.yaml +++ b/puppet/services/nova-api.yaml @@ -63,13 +63,15 @@ conditions: nova_workers_zero: {equals : [{get_param: NovaWorkers}, 0]} resources: - ApacheServiceBase: - type: ./apache.yaml - properties: - ServiceNetMap: {get_param: ServiceNetMap} - DefaultPasswords: {get_param: DefaultPasswords} - EndpointMap: {get_param: EndpointMap} - EnableInternalTLS: {get_param: EnableInternalTLS} + # Temporarily disable Nova API deployed in WSGI + # https://bugs.launchpad.net/nova/+bug/1661360 + # ApacheServiceBase: + # type: ./apache.yaml + # properties: + # ServiceNetMap: {get_param: ServiceNetMap} + # DefaultPasswords: {get_param: DefaultPasswords} + # EndpointMap: {get_param: EndpointMap} + # EnableInternalTLS: {get_param: EnableInternalTLS} NovaBase: type: ./nova-base.yaml @@ -90,7 +92,9 @@ outputs: config_settings: map_merge: - get_attr: [NovaBase, role_data, config_settings] - - get_attr: [ApacheServiceBase, role_data, config_settings] + # Temporarily disable Nova API deployed in WSGI + # https://bugs.launchpad.net/nova/+bug/1661360 + # - get_attr: [ApacheServiceBase, role_data, config_settings] - nova::cron::archive_deleted_rows::hour: '*/12' nova::cron::archive_deleted_rows::destination: '/dev/null' tripleo.nova_api.firewall_rules: @@ -115,20 +119,23 @@ outputs: "%{hiera('fqdn_$NETWORK')}" params: $NETWORK: {get_param: [ServiceNetMap, NovaApiNetwork]} - nova::api::service_name: 'httpd' - nova::wsgi::apache_api::ssl: {get_param: EnableInternalTLS} + # Temporarily disable Nova API deployed in WSGI + # https://bugs.launchpad.net/nova/+bug/1661360 + nova_wsgi_enabled: false + # nova::api::service_name: 'httpd' + # nova::wsgi::apache_api::ssl: {get_param: EnableInternalTLS} # NOTE: bind IP is found in Heat replacing the network name with the local node IP # for the given network; replacement examples (eg. for internal_api): # internal_api -> IP # internal_api_uri -> [IP] # internal_api_subnet - > IP/CIDR - nova::wsgi::apache_api::bind_host: {get_param: [ServiceNetMap, NovaApiNetwork]} - nova::wsgi::apache_api::servername: - str_replace: - template: - "%{hiera('fqdn_$NETWORK')}" - params: - $NETWORK: {get_param: [ServiceNetMap, NovaApiNetwork]} + # nova::wsgi::apache_api::bind_host: {get_param: [ServiceNetMap, NovaApiNetwork]} + # nova::wsgi::apache_api::servername: + # str_replace: + # template: + # "%{hiera('fqdn_$NETWORK')}" + # params: + # $NETWORK: {get_param: [ServiceNetMap, NovaApiNetwork]} nova::api::neutron_metadata_proxy_shared_secret: {get_param: NeutronMetadataProxySharedSecret} nova::api::instance_name_template: {get_param: InstanceNameTemplate} nova_enable_db_purge: {get_param: NovaEnableDBPurge} @@ -137,7 +144,9 @@ outputs: - nova_workers_zero - {} - nova::api::osapi_compute_workers: {get_param: NovaWorkers} - nova::wsgi::apache_api::workers: {get_param: NovaWorkers} + # Temporarily disable Nova API deployed in WSGI + # https://bugs.launchpad.net/nova/+bug/1661360 + # nova::wsgi::apache_api::workers: {get_param: NovaWorkers} step_config: | include tripleo::profile::base::nova::api service_config_settings: @@ -165,5 +174,7 @@ outputs: nova::keystone::auth::admin_url: {get_param: [EndpointMap, NovaAdmin, uri]} nova::keystone::auth::password: {get_param: NovaPassword} nova::keystone::auth::region: {get_param: KeystoneRegion} - metadata_settings: - get_attr: [ApacheServiceBase, role_data, metadata_settings] + # Temporarily disable Nova API deployed in WSGI + # https://bugs.launchpad.net/nova/+bug/1661360 + # metadata_settings: + # get_attr: [ApacheServiceBase, role_data, metadata_settings] diff --git a/puppet/services/nova-base.yaml b/puppet/services/nova-base.yaml index c448bf49..49cba79c 100644 --- a/puppet/services/nova-base.yaml +++ b/puppet/services/nova-base.yaml @@ -145,8 +145,6 @@ outputs: - '@' - {get_param: [EndpointMap, MysqlInternal, host]} - '/nova' - - '?bind_address=' - - "%{hiera('tripleo::profile::base::database::mysql::client_bind_address')}" nova::api_database_connection: list_join: - '' @@ -156,8 +154,6 @@ outputs: - '@' - {get_param: [EndpointMap, MysqlInternal, host]} - '/nova_api' - - '?bind_address=' - - "%{hiera('tripleo::profile::base::database::mysql::client_bind_address')}" nova::placement_database_connection: list_join: - '' @@ -167,8 +163,6 @@ outputs: - '@' - {get_param: [EndpointMap, MysqlInternal, host]} - '/nova_placement' - - '?bind_address=' - - "%{hiera('tripleo::profile::base::database::mysql::client_bind_address')}" nova::debug: {get_param: Debug} nova::purge_config: {get_param: EnableConfigPurge} nova::network::neutron::neutron_project_name: 'service' diff --git a/puppet/services/nova-compute.yaml b/puppet/services/nova-compute.yaml index 2312b635..f7484da2 100644 --- a/puppet/services/nova-compute.yaml +++ b/puppet/services/nova-compute.yaml @@ -141,3 +141,8 @@ outputs: # We'll probably treat it like we do with Neutron plugins. # Until then, just include it in the default nova-compute role. include tripleo::profile::base::nova::compute::libvirt + service_config_settings: + collectd: + tripleo.collectd.plugins.nova_compute: + - virt + collectd::plugins::virt::connection: "qemu:///system" diff --git a/puppet/services/nova-libvirt.yaml b/puppet/services/nova-libvirt.yaml index a9b2b3f9..faf1ae48 100644 --- a/puppet/services/nova-libvirt.yaml +++ b/puppet/services/nova-libvirt.yaml @@ -62,6 +62,7 @@ outputs: nova::compute::libvirt::qemu::configure_qemu: true nova::compute::libvirt::qemu::max_files: 32768 nova::compute::libvirt::qemu::max_processes: 131072 + nova::compute::libvirt::vncserver_listen: {get_param: [ServiceNetMap, NovaLibvirtNetwork]} tripleo.nova_libvirt.firewall_rules: '200 nova_libvirt': dport: diff --git a/puppet/services/octavia-api.yaml b/puppet/services/octavia-api.yaml index 4c6f4c37..58223baf 100644 --- a/puppet/services/octavia-api.yaml +++ b/puppet/services/octavia-api.yaml @@ -70,13 +70,15 @@ outputs: - "%{hiera('tripleo::profile::base::database::mysql::client_bind_address')}" octavia::keystone::authtoken::auth_url: {get_param: [EndpointMap, KeystoneAdmin, uri_no_suffix]} octavia::keystone::authtoken::project_name: 'service' + octavia::keystone::authtoken::password: {get_param: OctaviaPassword} octavia::api::sync_db: true tripleo.octavia_api.firewall_rules: '120 octavia api': dport: - 9876 - 13876 - octavia::host: {get_param: [ServiceNetMap, OctaviaApiNetwork]} + octavia::api::host: {get_param: [ServiceNetMap, OctaviaApiNetwork]} + neutron::server::service_providers: ['LOADBALANCERV2:Octavia:neutron_lbaas.drivers.octavia.driver.OctaviaDriver:default'] step_config: | include tripleo::profile::base::octavia::api service_config_settings: diff --git a/puppet/services/octavia-health-manager.yaml b/puppet/services/octavia-health-manager.yaml new file mode 100644 index 00000000..51d32f23 --- /dev/null +++ b/puppet/services/octavia-health-manager.yaml @@ -0,0 +1,61 @@ +heat_template_version: ocata + +description: > + OpenStack Octavia Health Manager service. + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + MonitoringSubscriptionOctaviaHealthManager: + default: 'overcloud-octavia-health-manager' + type: string + OctaviaHealthManagerLoggingSource: + type: json + default: + tag: openstack.octavia.health-manager + path: /var/log/octavia/health-manager.log + OctaviaHeartbeatKey: + type: string + description: Key to identify heartbeat messages for amphorae. + hidden: true + +resources: + + OctaviaBase: + type: ./octavia-base.yaml + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + +outputs: + role_data: + description: Role data for the Octavia Health Manager service. + value: + service_name: octavia_health_manager + monitoring_subscription: {get_param: MonitoringSubscriptionOctaviaHealthManager} + logging_source: {get_param: OctaviaHealthManagerLoggingSource} + logging_groups: + - octavia + config_settings: + map_merge: + - get_attr: [OctaviaBase, role_data, config_settings] + - octavia::health_manager::heartbeat_key: {get_param: OctaviaHeartbeatKey} + octavia::health_manager::event_streamer_driver: 'queue_event_streamer' + step_config: | + include tripleo::profile::base::octavia::health_manager + + + diff --git a/puppet/services/octavia-housekeeping.yaml b/puppet/services/octavia-housekeeping.yaml new file mode 100644 index 00000000..84c33433 --- /dev/null +++ b/puppet/services/octavia-housekeeping.yaml @@ -0,0 +1,70 @@ +heat_template_version: ocata + +description: > + OpenStack Octavia Housekeeping service. + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + OctaviaAmphoraExpiryAge: + default: 0 + description: The interval in seconds after which an unused Amphora will + be considered expired and cleaned up. If left to 0, the + configuration will not be set and the system will use + the service defaults. + type: number + MonitoringSubscriptionOctaviaHousekeeping: + default: 'overcloud-octavia-housekeeping' + type: string + OctaviaHousekeepingLoggingSource: + type: json + default: + tag: openstack.octavia.housekeeping + path: /var/log/octavia/housekeeping.log + +conditions: + amphora_expiry_is_zero: {equals: [{get_param: OctaviaAmphoraExpiryAge}, 0]} + + +resources: + + OctaviaBase: + type: ./octavia-base.yaml + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + +outputs: + role_data: + description: Role data for the Octavia Housekeeping service. + value: + service_name: octavia_housekeeping + monitoring_subscription: {get_param: MonitoringSubscriptionOctaviaHousekeeping} + logging_source: {get_param: OctaviaHousekeepingLoggingSource} + logging_groups: + - octavia + config_settings: + map_merge: + - get_attr: [OctaviaBase, role_data, config_settings] + - + if: + - amphora_expiry_is_zero + - {} + - octavia::worker::amphora_expiry_age: {get_param: OctaviaAmphoraExpiryAge} + step_config: | + include tripleo::profile::base::octavia::housekeeping + + diff --git a/puppet/services/octavia-worker.yaml b/puppet/services/octavia-worker.yaml new file mode 100644 index 00000000..9212b76b --- /dev/null +++ b/puppet/services/octavia-worker.yaml @@ -0,0 +1,102 @@ +heat_template_version: ocata + +description: > + OpenStack Octavia Worker service. + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + MonitoringSubscriptionOctaviaWorker: + default: 'overcloud-octavia-worker' + type: string + OctaviaWorkerLoggingSource: + type: json + default: + tag: openstack.octavia.worker + path: /var/log/octavia/worker.log + OctaviaAmphoraImageTag: + default: '' + description: Glance image tag for identifying the amphora image. + type: string + OctaviaAmphoraNetworkList: + default: [] + description: List of networks to attach to amphorae. + type: comma_delimited_list + OctaviaLoadBalancerTopology: + default: '' + description: Load balancer topology configuration. + type: string + OctaviaFlavorId: + default: 65 + description: Nova flavor ID to be used when creating the nova flavor for + amphora. + type: number + OctaviaFlavorProperties: + default: {} + description: Dictionary describing the nova flavor for amphora. + type: json + OctaviaManageNovaFlavor: + default: false + description: Configure the nova flavor for the amphora. + type: boolean + OctaviaSSHKeyName: + default: 'octavia-ssh-key' + description: name for ssh key to be configured so the amphora can + be logged into. + type: string + +conditions: + octavia_topology_unset: {equals : [{get_param: OctaviaLoadBalancerTopology}, ""]} + octavia_amphora_tag_unset: {equals: [{get_param: OctaviaAmphoraImageTag}, ""]} + +resources: + + OctaviaBase: + type: ./octavia-base.yaml + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + +outputs: + role_data: + description: Role data for the Octavia WoWorker service. + value: + service_name: octavia_worker + monitoring_subscription: {get_param: MonitoringSubscriptionOctaviaWorker} + logging_source: {get_param: OctaviaWorkerLoggingSource} + logging_groups: + -octavia + config_settings: + map_merge: + - get_attr: [OctaviaBase, role_data, config_settings] + - octavia::worker::amp_boot_network_list: {get_param: OctaviaAmphoraNetworkList} + octavia::worker::amp_flavor_id: {get_param: OctaviaFlavorId} + octavia::worker::nova_flavor_config: {get_param: OctaviaFlavorProperties} + octavia::worker::manage_nova_flavor: {get_param: OctaviaManageNovaFlavor} + octavia::worker::ssh_key_name: {get_param: OctaviaSSHKeyName} + - + if: + - octavia_amphora_tag_unset + - {} + - octavia::worker::amp_image_tag: {get_param: OctaviaAmphoraImageTag} + - + if: + - octavia_topology_unset + - {} + - octavia::worker::loadbalancer_topology: {get_param: OctaviaLoadBalancerTopology} + step_config: | + include tripleo::profile::base::octavia::worker + diff --git a/puppet/services/pacemaker.yaml b/puppet/services/pacemaker.yaml index a8a9fb99..c47229f1 100644 --- a/puppet/services/pacemaker.yaml +++ b/puppet/services/pacemaker.yaml @@ -39,6 +39,12 @@ parameters: description: The password for the 'pcsd' user for pacemaker. hidden: true default: '' + CorosyncSettleTries: + type: number + description: Number of tries for cluster settling. This has the + same default as the pacemaker puppet module. Override + to a smaller value when in need to replace a controller node. + default: 360 FencingConfig: default: {} description: | @@ -97,6 +103,7 @@ outputs: pacemaker::resource_defaults::defaults: resource-stickiness: { value: INFINITY } corosync_token_timeout: 10000 + pacemaker::corosync::settle_tries: {get_param: CorosyncSettleTries} tripleo.pacemaker.firewall_rules: '130 pacemaker tcp': proto: 'tcp' diff --git a/puppet/services/sshd.yaml b/puppet/services/sshd.yaml new file mode 100644 index 00000000..41e144a0 --- /dev/null +++ b/puppet/services/sshd.yaml @@ -0,0 +1,34 @@ +heat_template_version: ocata + +description: > + Configure sshd_config + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + BannerText: + default: '' + description: Configures Banner text in sshd_config + type: string + +outputs: + role_data: + description: Role data for the ssh + value: + service_name: sshd + config_settings: + BannerText: {get_param: BannerText} + step_config: | + include ::tripleo::profile::base::sshd diff --git a/puppet/services/swift-proxy.yaml b/puppet/services/swift-proxy.yaml index 62d227a2..31a4c178 100644 --- a/puppet/services/swift-proxy.yaml +++ b/puppet/services/swift-proxy.yaml @@ -57,6 +57,12 @@ parameters: default: 5672 description: Set rabbit subscriber port, change this if using SSL type: number + RabbitClientUseSSL: + default: false + description: > + Rabbit client subscriber parameter to specify + an SSL connection to the RabbitMQ host. + type: string conditions: @@ -91,6 +97,7 @@ outputs: swift::proxy::staticweb::url_base: {get_param: [EndpointMap, SwiftPublic, uri_no_suffix]} swift::proxy::ceilometer::nonblocking_notify: true tripleo::profile::base::swift::proxy::rabbit_port: {get_param: RabbitClientPort} + tripleo::profile::base::swift::proxy::ceilometer_messaging_use_ssl: {get_param: RabbitClientUseSSL} tripleo::profile::base::swift::proxy::ceilometer_enabled: {get_param: SwiftCeilometerPipelineEnabled} tripleo.swift_proxy.firewall_rules: '122 swift proxy': |