aboutsummaryrefslogtreecommitdiffstats
path: root/puppet/services/sahara-engine.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'puppet/services/sahara-engine.yaml')
0 files changed, 0 insertions, 0 deletions
href='#n116'>116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 
# Copyright 2015-2017 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# ############################
# Traffic gen configuration
# ############################

# log file for all traffic generator related commands
LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'

# TRAFFIC dictionary defines traffic parameters used by all traffic generators.
# Detailed description of TRAFFIC dictionary items follows:
#
#    'traffic_type'  - One of the supported traffic types.
#                      E.g. rfc2544_throughput, rfc2544_back2back
#                      or rfc2544_continuous
#                      Data type: str
#                      Default value: "rfc2544_throughput".
#    'bidir'         - Specifies if generated traffic will be full-duplex (True)
#                      or half-duplex (False)
#                      Data type: str
#                      Supported values: "True", "False"
#                      Default value: "False".
#    'frame_rate'    - Defines desired percentage of frame rate used during
#                      continuous stream tests.
#                      Data type: int
#                      Default value: 100.
#    'multistream'   - Defines number of flows simulated by traffic generator.
#                      Value 0 disables multistream feature
#                      Data type: int
#                      Supported values: 0-65536 for 'L4' stream type
#                                        unlimited for 'L2' and 'L3' stream types
#                      Default value: 0.
#    'stream_type'   - Stream type is an extension of the "multistream" feature.
#                      If multistream is disabled, then stream type will be
#                      ignored. Stream type defines ISO OSI network layer used
#                      for simulation of multiple streams.
#                      Data type: str
#                      Supported values:
#                         "L2" - iteration of destination MAC address
#                         "L3" - iteration of destination IP address
#                         "L4" - iteration of destination port
#                                of selected transport protocol
#                      Default value: "L4".
#    'pre_installed_flows'
#                   -  Pre-installed flows is an extension of the "multistream"
#                      feature. If enabled, it will implicitly insert a flow
#                      for each stream. If multistream is disabled, then
#                      pre-installed flows will be ignored.
#                      Note: It is supported only for p2p deployment scenario.
#                      Data type: str
#                      Supported values:
#                         "Yes" - flows will be inserted into OVS
#                         "No"  - flows won't be inserted into OVS
#                      Default value: "No".
#    'flow_type'     - Defines flows complexity.
#                      Data type: str
#                      Supported values:
#                         "port" - flow is defined by ingress ports
#                         "IP"   - flow is defined by ingress ports
#                                  and src and dst IP addresses
#                      Default value: "port"
#    'flow_control'  - Controls flow control support by traffic generator.
#                      Supported values:
#                         False  - flow control is disabled
#                         True   - flow control is enabled
#                      Default value: False
#                      Note: Currently it is supported by IxNet only
#    'learning_frames' - Controls learning frames support by traffic generator.
#                      Supported values:
#                         False  - learning freames are disabled
#                         True   - learning freames are enabled
#                      Default value: True
#                      Note: Currently it is supported by IxNet only
#    'l2'            - A dictionary with l2 network layer details. Supported
#                      values are:
#        'srcmac'    - Specifies source MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "00:00:00:00:00:00".
#        'dstmac'    - Specifies destination MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "00:00:00:00:00:00".
#        'framesize' - Specifies default frame size. This value should not be
#                      changed directly. It will be overridden during testcase
#                      execution by values specified by list TRAFFICGEN_PKT_SIZES.
#                      Data type: int
#                      Default value: 64
#    'l3'            - A dictionary with l3 network layer details. Supported
#                      values are:
#        'enabled'   - Specifies if l3 layer should be enabled or disabled.
#                      Data type: bool
#                      Default value: True
#                      NOTE: Supported only by IxNet trafficgen class
#        'srcip'     - Specifies source MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "1.1.1.1".
#        'dstip'     - Specifies destination MAC address filled by traffic generator.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: str
#                      Default value: "90.90.90.90".
#        'proto'     - Specifies deflaut protocol type.
#                      Please check particular traffic generator implementation
#                      for supported protocol types.
#                      Data type: str
#                      Default value: "udp".
#    'l4'            - A dictionary with l4 network layer details. Supported
#                      values are:
#        'enabled'   - Specifies if l4 layer should be enabled or disabled.
#                      Data type: bool
#                      Default value: True
#                      NOTE: Supported only by IxNet trafficgen class
#        'srcport'   - Specifies source port of selected transport protocol.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: int
#                      Default value: 3000
#        'dstport'   - Specifies destination port of selected transport protocol.
#                      NOTE: It can be modified by vsperf in some scenarios.
#                      Data type: int
#                      Default value: 3001
#    'vlan'          - A dictionary with vlan encapsulation details. Supported
#                      values are:
#        'enabled'   - Specifies if vlan encapsulation should be enabled or
#                      disabled.
#                      Data type: bool
#                      Default value: False
#        'id'        - Specifies vlan id.
#                      Data type: int (NOTE: must fit to 12 bits)
#                      Default value: 0
#        'priority'  - Specifies a vlan priority (PCP header field).
#                      Data type: int (NOTE: must fit to 3 bits)
#                      Default value: 0
#        'cfi'       - Specifies if frames can or cannot be dropped during
#                      congestion (DEI header field).
#                      Data type: int (NOTE: must fit to 1 bit)
#                      Default value: 0
#    'capture'       - A dictionary with traffic capture configuration.
#                      NOTE: It is supported only by T-Rex traffic generator.
#        'enabled'   - Specifies if traffic should be captured
#                      Data type: bool
#                      Default value: False
#        'tx_ports'  - A list of ports, where frames transmitted towards DUT will
#                      be captured. Ports have numbers 0 and 1. TX packet capture
#                      is disabled if list of ports is empty.
#                      Data type: list
#                      Default value: [0]
#        'rx_ports'  - A list of ports, where frames received from DUT will
#                      be captured. Ports have numbers 0 and 1. RX packet capture
#                      is disabled if list of ports is empty.
#                      Data type: list
#                      Default value: [1]
#        'count'     - A number of frames to be captured. The same count value
#                      is applied to both TX and RX captures.
#                      Data type: int
#                      Default value: 1
#        'filter'    - An expression used to filter TX and RX packets. It uses the same
#                      syntax as pcap library. See pcap-filter man page for additional
#                      details.
#                      Data type: str
#                      Default value: ''
TRAFFIC = {
    'traffic_type' : 'rfc2544_throughput',
    'frame_rate' : 100,
    'bidir' : 'True',  # will be passed as string in title format to tgen
    'multistream' : 0,
    'stream_type' : 'L4',
    'pre_installed_flows' : 'No',           # used by vswitch implementation
    'flow_type' : 'port',                   # used by vswitch implementation
    'flow_control' : False,                 # supported only by IxNet
    'learning_frames' : True,               # supported only by IxNet
    'l2': {
        'framesize': 64,
        'srcmac': '00:00:00:00:00:00',
        'dstmac': '00:00:00:00:00:00',
    },
    'l3': {
        'enabled': True,
        'proto': 'udp',
        'srcip': '1.1.1.1',
        'dstip': '90.90.90.90',
    },
    'l4': {
        'enabled': True,
        'srcport': 3000,
        'dstport': 3001,
    },
    'vlan': {
        'enabled': False,
        'id': 0,
        'priority': 0,
        'cfi': 0,
    },
    'capture': {
        'enabled': False,
        'tx_ports' : [0],
        'rx_ports' : [1],
        'count': 1,
        'filter': '',
    },
}

#path to traffic generators directory.
TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')

# traffic generator to use in tests
#TRAFFICGEN = 'TestCenter'
TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
#TRAFFICGEN = 'Moongen'
#TRAFFICGEN = 'Trex'

# List of packet sizes to send.
# Expand like this: (64, 128, 256, 512, 1024)
TRAFFICGEN_PKT_SIZES = (64,)

TRAFFICGEN_DURATION = 30

TRAFFICGEN_RFC2544_TESTS = 1
TRAFFICGEN_RFC2889_TRIALS = 1
TRAFFICGEN_LOSSRATE = 0.0

##############################
# DUMMY Configuration -- BEGIN

# By default, dummy traffic generator asks for "measured" values.
# Following dictionary allows to preconfigure these values and
# to avoid user interaction. It can be useful for automated
# integration tests.
# Example of values for continuous traffic type:
#   TRAFFICGEN_DUMMY_RESULTS{'frames rx': 500000,
#                            'frames tx': 500000,
#                            'rx rate %': 100,
#                            'tx rate %': 100,
#                            'frameloss %': 0,
#                            'min latency': 1,
#                            'max latency': 15,
#                            'avg latency': 2.5,
#                           }
#
TRAFFICGEN_DUMMY_RESULTS = {}

# DUMMY Configuration -- END
############################

#############################
# IXIA Configuration -- BEGIN

# path to 'ixos' install path
TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'

# network address of IXIA chassis
TRAFFICGEN_IXIA_HOST = ''

TRAFFICGEN_IXIA_CARD = ''

TRAFFICGEN_IXIA_PORT1 = ''

TRAFFICGEN_IXIA_PORT2 = ''

TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnetwork/lib/IxTclNetwork'

# IxNetwork host IP address
TRAFFICGEN_IXNET_MACHINE = ''
TRAFFICGEN_IXNET_PORT = ''
TRAFFICGEN_IXNET_USER = ''
TRAFFICGEN_IXNET_CHASSIS = ''

# The result directory on $TRAFFICGEN_IXNET_MACHINE
TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''

# The result directory on DUT. This needs to map to the same directory
# as the previous one
TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''

# directory with 3rd party scripts generated by IXIA tools
TRAFFICGEN_IXIA_3RD_PARTY = os.path.join(ROOT_DIR, '3rd_party/ixia')

# default TCL script, which will be used for IXNETWORK configuration
TRAFFICGEN_IXNET_TCL_SCRIPT = 'ixnetrfc2544.tcl'

# IXIA Configuration -- END
###########################


###########################################
# Spirent TestCenter Configuration -- BEGIN

# Path to Python 2 executable
TRAFFICGEN_STC_PYTHON2_PATH = "/bin/python2.7"

# Path to the location of the TestCenter files
TRAFFICGEN_STC_TESTCENTER_PATH = os.path.join(ROOT_DIR, 'tools/pkt_gen/testcenter')

# Name of the TestCenter RFC2544 Tput helper python script
TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py"

# Name of the Testcenter RFC2899 Tput Helper Python Scripts
TRAFFICGEN_STC_RFC2889_TEST_FILE_NAME = "testcenter-rfc2889-rest.py"

# 2889 Port Locations
TRAFFICGEN_STC_RFC2889_LOCATION = ""

# The address of the Spirent Lab Server to use
TRAFFICGEN_STC_LAB_SERVER_ADDR = ""

# The address of the Spirent License Server in your environment
TRAFFICGEN_STC_LICENSE_SERVER_ADDR = ""

# The address of the TestCenter chassis that holds the east port
TRAFFICGEN_STC_EAST_CHASSIS_ADDR = ""

# The slot number of the card that holds the east port
TRAFFICGEN_STC_EAST_SLOT_NUM = ""

# The port number on the card that holds the east port
TRAFFICGEN_STC_EAST_PORT_NUM = ""

# The address of the TestCenter chassis that holds the west port
TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""

# The slot number of the card that holds the west port
TRAFFICGEN_STC_WEST_SLOT_NUM = ""

# The port number on the card that holds the west port
TRAFFICGEN_STC_WEST_PORT_NUM = ""

# The friendly name to identify the Spirent Lab Server test session
TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput"
# The directory to copy results to

TRAFFICGEN_STC_RESULTS_DIR = os.path.join(ROOT_DIR, "Results")
#  The prefix for the CSV results file

TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput"
# The number of trials to execute during the test

TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1"

# The duration of each trial executed during the test, in seconds
TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60"

# The traffic pattern between endpoints, BACKBONE, MESH or PAIR
TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR"

# The search mode used to find the throughput rate, COMBO, STEP or BINARY
TRAFFICGEN_STC_SEARCH_MODE = "BINARY"

# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE
TRAFFICGEN_STC_LEARNING_MODE = "AUTO"

# The minimum percent line rate that will be used during the test
TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0"

# The maximum percent line rate that will be used during the test
TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0"

# If SearchMode is BINARY, the percent line rate that will be used at the start of the test
TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0"

# When SearchMode is STEP, the percent increase in load per step
TRAFFICGEN_STC_RATE_STEP_PCT = "10.0"

# The minimum percentage of load adjustment between iterations
TRAFFICGEN_STC_RESOLUTION_PCT = "1.0"

# The frame size, in bytes
TRAFFICGEN_STC_FRAME_SIZE = "256"

# The maximum acceptable frame loss percent in any iteration
TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0"

# The address to assign to the first emulated device interface on the first east port
TRAFFICGEN_STC_EAST_INTF_ADDR = ""

# The gateway address to assign to the first emulated device interface on the first east port
TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = ""

# The address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_ADDR = ""

# The gateway address to assign to the first emulated device interface on the first west port
TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = ""

# Print additional information to the terminal during the test
TRAFFICGEN_STC_VERBOSE = "True"

# Spirent TestCenter Configuration -- END
#########################################

#############################
# Xena Configuration -- BEGIN

# Xena traffic generator connection info
TRAFFICGEN_XENA_IP = ''
TRAFFICGEN_XENA_PORT1 = ''
TRAFFICGEN_XENA_PORT2 = ''
TRAFFICGEN_XENA_USER = ''
TRAFFICGEN_XENA_PASSWORD = ''
TRAFFICGEN_XENA_MODULE1 = ''
TRAFFICGEN_XENA_MODULE2 = ''

# Xena Port IP info
TRAFFICGEN_XENA_PORT0_IP = '192.168.199.10'
TRAFFICGEN_XENA_PORT0_CIDR = 24
TRAFFICGEN_XENA_PORT0_GATEWAY = '192.168.199.1'
TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
TRAFFICGEN_XENA_PORT1_CIDR = 24
TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'

# Xena RFC 2544 options
# Please reference xena documentation before making changes to these settings
TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'

# Xena RFC 2544 final verification options
TRAFFICGEN_XENA_RFC2544_VERIFY = False
TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
# Number of verify attempts before giving up...
TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
# Logic for restarting binary search, see documentation for details
TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True

# Xena Continuous traffic options
# Please reference xena documentation before making changes to these settings
TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3

# Xena Configuration -- END
###########################

###################################################
# MoonGen Configuration and Connection Info-- BEGIN

# Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ''
TRAFFICGEN_MOONGEN_USER = ''
TRAFFICGEN_MOONGEN_BASE_DIR = ''
TRAFFICGEN_MOONGEN_PORTS = ''
# Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
# Today only 10 Gbps is supported
TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ''

# MoonGen Configuration and Connection Info-- END
#################################################

################################################
# Trex Configuration and Connection Info-- BEGIN

# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
# Example: TRAFFICGEN_TREX_USER = 'root'
# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
TRAFFICGEN_TREX_HOST_IP_ADDR = ''
TRAFFICGEN_TREX_USER = ''
TRAFFICGEN_TREX_BASE_DIR = ''
TRAFFICGEN_TREX_PORT1 = ''
TRAFFICGEN_TREX_PORT2 = ''
# RFC2544 Throughput execution will end after threshold below is reached.
# It defines maximal difference between frame rate of successful (i.e. defined
# frameloss reached) and unsuccessful (i.e. frameloss exceeded) iterations.
TRAFFICGEN_TREX_RFC2544_TPUT_THRESHOLD = 0.05
# Latency statistics are collected by separate stream created for each interface.
# Parameter below defines frequency of packets used for latency measurement in PPS.
# Value 0 will disable latency specific streams.
TRAFFICGEN_TREX_LATENCY_PPS = 1000
# Enablement of learning packets before sending test traffic
TRAFFICGEN_TREX_LEARNING_MODE = True
TRAFFICGEN_TREX_LEARNING_DURATION = 5
# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
TRAFFICGEN_TREX_PROMISCUOUS = False
PATHS['trafficgen'] = {
    'Trex': {
        'type' : 'src',
        'src': {
            'path': os.path.join(ROOT_DIR, 'src/trex/trex/scripts/automation/trex_control_plane/stl')
    }
  }
}
# TRex validation option for RFC2544
TRAFFICGEN_TREX_VERIFICATION_MODE = False
TRAFFICGEN_TREX_VERIFICATION_DURATION = 60
TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10
# TREX Configuration and Connection Info-- END
##############################################