diff options
Diffstat (limited to 'network')
47 files changed, 838 insertions, 37 deletions
diff --git a/network/config/bond-with-vlans/README.md b/network/config/bond-with-vlans/README.md index 98879b4f..afe71776 100644 --- a/network/config/bond-with-vlans/README.md +++ b/network/config/bond-with-vlans/README.md @@ -3,10 +3,9 @@ Vlans on a bonded pair of NICs for each Overcloud role. There are two versions of the controller role template, one with an external network interface, and another without. If the -external network interface is not configured the ctlplane address +external network interface is not configured, the ctlplane address ranges will be used for external (public) network traffic. - Configuration ------------- @@ -20,8 +19,31 @@ something like this: OS::TripleO::ObjectStorage::Net::SoftwareConfig: network/config/bond-with-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: network/config/bond-with-vlans/ceph-storage.yaml +Or use this Heat environment file: + + environments/net-bond-with-vlans.yaml + Configuration with no External Network -------------------------------------- + Same as above except set the following value for the controller role: OS::TripleO::Controller::Net::SoftwareConfig: network/config/bond-with-vlans/controller-no-external.yaml + +Configuration with System Management Network +-------------------------------------------- + +To enable the optional System Management network, create a Heat environment +that looks something like this: + + resource\_registry: + OS::TripleO::Network::Management: ../network/management.yaml + OS::TripleO::Controller::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::Compute::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::CephStorage::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::SwiftStorage::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::BlockStorage::Ports::ManagementPort: ../network/ports/management.yaml + +Or use this Heat environment file: + + environments/network-management.yaml diff --git a/network/config/bond-with-vlans/ceph-storage.yaml b/network/config/bond-with-vlans/ceph-storage.yaml index 620d1f7a..93db8666 100644 --- a/network/config/bond-with-vlans/ceph-storage.yaml +++ b/network/config/bond-with-vlans/ceph-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string BondInterfaceOvsOptions: default: '' description: The ovs_options string for the bond interface. Set things like @@ -42,6 +46,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -114,6 +122,14 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/cinder-storage.yaml b/network/config/bond-with-vlans/cinder-storage.yaml index f4c6de8f..bea98c19 100644 --- a/network/config/bond-with-vlans/cinder-storage.yaml +++ b/network/config/bond-with-vlans/cinder-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string BondInterfaceOvsOptions: default: '' description: The ovs_options string for the bond interface. Set things like @@ -46,6 +50,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -125,6 +133,14 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/compute.yaml b/network/config/bond-with-vlans/compute.yaml index 8cb3705b..774bf02d 100644 --- a/network/config/bond-with-vlans/compute.yaml +++ b/network/config/bond-with-vlans/compute.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string BondInterfaceOvsOptions: default: '' description: The ovs_options string for the bond interface. Set things like @@ -46,6 +50,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -125,6 +133,14 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/controller-no-external.yaml b/network/config/bond-with-vlans/controller-no-external.yaml index 22579e8f..375d40be 100644 --- a/network/config/bond-with-vlans/controller-no-external.yaml +++ b/network/config/bond-with-vlans/controller-no-external.yaml @@ -25,6 +25,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string BondInterfaceOvsOptions: default: '' description: The ovs_options string for the bond interface. Set things like @@ -50,6 +54,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -66,6 +74,7 @@ resources: - type: ovs_bridge name: {get_input: bridge_name} + use_dhcp: true members: - type: ovs_bond @@ -107,6 +116,14 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/controller.yaml b/network/config/bond-with-vlans/controller.yaml index eb4399ea..d3627ead 100644 --- a/network/config/bond-with-vlans/controller.yaml +++ b/network/config/bond-with-vlans/controller.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string BondInterfaceOvsOptions: default: 'bond_mode=active-backup' description: The ovs_options string for the bond interface. Set things like @@ -54,6 +58,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -119,7 +127,7 @@ resources: ip_netmask: {get_param: ExternalIpSubnet} routes: - - ip_netmask: 0.0.0.0/0 + default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} - type: vlan @@ -149,6 +157,14 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/bond-with-vlans/swift-storage.yaml b/network/config/bond-with-vlans/swift-storage.yaml index f6b2a699..de9121e5 100644 --- a/network/config/bond-with-vlans/swift-storage.yaml +++ b/network/config/bond-with-vlans/swift-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string BondInterfaceOvsOptions: default: '' description: The ovs_options string for the bond interface. Set things like @@ -46,6 +50,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -125,6 +133,14 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/README.md b/network/config/multiple-nics/README.md index 3d81f0be..0d8a0f03 100644 --- a/network/config/multiple-nics/README.md +++ b/network/config/multiple-nics/README.md @@ -19,3 +19,21 @@ something like this: Or use this Heat environment file: environments/net-multiple-nics.yaml + +Configuration with System Management Network +-------------------------------------------- + +To enable the optional System Management network, create a Heat environment +that looks something like this: + + resource\_registry: + OS::TripleO::Network::Management: ../network/management.yaml + OS::TripleO::Controller::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::Compute::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::CephStorage::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::SwiftStorage::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::BlockStorage::Ports::ManagementPort: ../network/ports/management.yaml + +Or use this Heat environment file: + + environments/network-management.yaml diff --git a/network/config/multiple-nics/ceph-storage.yaml b/network/config/multiple-nics/ceph-storage.yaml index 7d650f4b..84cb0f12 100644 --- a/network/config/multiple-nics/ceph-storage.yaml +++ b/network/config/multiple-nics/ceph-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -49,6 +53,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -58,12 +66,12 @@ parameters: description: The subnet CIDR of the control plane network. type: string ControlPlaneDefaultRoute: # Override this via parameter_defaults - description: The subnet CIDR of the control plane network. + description: The default route of the control plane network. type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. - type: json + type: comma_delimited_list EC2MetadataIp: # Override this via parameter_defaults description: The IP address of the EC2 metadata server. type: string @@ -76,7 +84,7 @@ resources: config: os_net_config: network_config: - - + - type: interface name: nic1 use_dhcp: false @@ -109,6 +117,14 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: interface + # name: nic7 + # use_dhcp: false + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/cinder-storage.yaml b/network/config/multiple-nics/cinder-storage.yaml index fdb6c9d8..0b0218c5 100644 --- a/network/config/multiple-nics/cinder-storage.yaml +++ b/network/config/multiple-nics/cinder-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -49,6 +53,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -58,12 +66,12 @@ parameters: description: The subnet CIDR of the control plane network. type: string ControlPlaneDefaultRoute: # Override this via parameter_defaults - description: The subnet CIDR of the control plane network. + description: The default route of the control plane network. type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. - type: json + type: comma_delimited_list EC2MetadataIp: # Override this via parameter_defaults description: The IP address of the EC2 metadata server. type: string @@ -76,7 +84,7 @@ resources: config: os_net_config: network_config: - - + - type: interface name: nic1 use_dhcp: false @@ -116,6 +124,14 @@ resources: addresses: - ip_netmask: {get_param: InternalApiIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: interface + # name: nic7 + # use_dhcp: false + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/compute.yaml b/network/config/multiple-nics/compute.yaml index 0032a287..97eef52b 100644 --- a/network/config/multiple-nics/compute.yaml +++ b/network/config/multiple-nics/compute.yaml @@ -29,6 +29,14 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -37,21 +45,33 @@ parameters: default: 30 description: Vlan ID for the storage network traffic. type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number TenantNetworkVlanID: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. type: string ControlPlaneDefaultRoute: # Override this via parameter_defaults - description: The subnet CIDR of the control plane network. + description: The default route of the control plane network. type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. - type: json + type: comma_delimited_list EC2MetadataIp: # Override this via parameter_defaults description: The IP address of the EC2 metadata server. type: string @@ -112,6 +132,14 @@ resources: use_dhcp: false # force the MAC address of the bridge to this interface primary: true + # Uncomment when including environments/network-management.yaml + #- + # type: interface + # name: nic7 + # use_dhcp: false + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/controller.yaml b/network/config/multiple-nics/controller.yaml index 63f53a1f..377fd116 100644 --- a/network/config/multiple-nics/controller.yaml +++ b/network/config/multiple-nics/controller.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -49,6 +53,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -58,12 +66,12 @@ parameters: description: The subnet CIDR of the control plane network. type: string ControlPlaneDefaultRoute: # Override this via parameter_defaults - description: The subnet CIDR of the control plane network. + description: The default route of the control plane network. type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. - type: json + type: comma_delimited_list EC2MetadataIp: # Override this via parameter_defaults description: The IP address of the EC2 metadata server. type: string @@ -76,7 +84,7 @@ resources: config: os_net_config: network_config: - - + - type: interface name: nic1 use_dhcp: false @@ -131,13 +139,14 @@ resources: - type: ovs_bridge name: {get_input: bridge_name} + dns_servers: {get_param: DnsServers} use_dhcp: false addresses: - ip_netmask: {get_param: ExternalIpSubnet} routes: - - ip_netmask: 0.0.0.0/0 + default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} members: - @@ -145,6 +154,14 @@ resources: name: nic6 # force the MAC address of the bridge to this interface primary: true + # Uncomment when including environments/network-management.yaml + #- + # type: interface + # name: nic7 + # use_dhcp: false + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/multiple-nics/swift-storage.yaml b/network/config/multiple-nics/swift-storage.yaml index 00e4f353..b75bbd6e 100644 --- a/network/config/multiple-nics/swift-storage.yaml +++ b/network/config/multiple-nics/swift-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -49,6 +53,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -58,12 +66,12 @@ parameters: description: The subnet CIDR of the control plane network. type: string ControlPlaneDefaultRoute: # Override this via parameter_defaults - description: The subnet CIDR of the control plane network. + description: The default route of the control plane network. type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. - type: json + type: comma_delimited_list EC2MetadataIp: # Override this via parameter_defaults description: The IP address of the EC2 metadata server. type: string @@ -76,7 +84,7 @@ resources: config: os_net_config: network_config: - - + - type: interface name: nic1 use_dhcp: false @@ -116,6 +124,14 @@ resources: addresses: - ip_netmask: {get_param: InternalApiIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: interface + # name: nic7 + # use_dhcp: false + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/README.md b/network/config/single-nic-vlans/README.md index 6f128650..f9c2e512 100644 --- a/network/config/single-nic-vlans/README.md +++ b/network/config/single-nic-vlans/README.md @@ -1,9 +1,9 @@ This directory contains Heat templates to help configure -Vlans on a single NICs for each Overcloud role. +Vlans on a single NIC for each Overcloud role. There are two versions of the controller role template, one with an external network interface, and another without. If the -external network interface is not configured the ctlplane address +external network interface is not configured, the ctlplane address ranges will be used for external (public) network traffic. Configuration @@ -23,9 +23,27 @@ Or use this Heat environment file: environments/net-single-nic-with-vlans.yaml - Configuration with no External Network -------------------------------------- + Same as above except set the following value for the controller role: OS::TripleO::Controller::Net::SoftwareConfig: network/config/single-nic-vlans/controller-no-external.yaml + +Configuration with System Management Network +-------------------------------------------- + +To enable the optional System Management network, create a Heat environment +that looks something like this: + + resource\_registry: + OS::TripleO::Network::Management: ../network/management.yaml + OS::TripleO::Controller::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::Compute::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::CephStorage::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::SwiftStorage::Ports::ManagementPort: ../network/ports/management.yaml + OS::TripleO::BlockStorage::Ports::ManagementPort: ../network/ports/management.yaml + +Or use this Heat environment file: + + environments/network-management.yaml diff --git a/network/config/single-nic-vlans/ceph-storage.yaml b/network/config/single-nic-vlans/ceph-storage.yaml index 5148c520..80bc32d3 100644 --- a/network/config/single-nic-vlans/ceph-storage.yaml +++ b/network/config/single-nic-vlans/ceph-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string StorageNetworkVlanID: default: 30 description: Vlan ID for the storage network traffic. @@ -37,6 +41,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -97,6 +105,13 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/cinder-storage.yaml b/network/config/single-nic-vlans/cinder-storage.yaml index e79a9f4b..e509443a 100644 --- a/network/config/single-nic-vlans/cinder-storage.yaml +++ b/network/config/single-nic-vlans/cinder-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -41,6 +45,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -107,6 +115,13 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/compute.yaml b/network/config/single-nic-vlans/compute.yaml index 4e93b31c..8cf6825d 100644 --- a/network/config/single-nic-vlans/compute.yaml +++ b/network/config/single-nic-vlans/compute.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -41,6 +45,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -107,6 +115,13 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/controller-no-external.yaml b/network/config/single-nic-vlans/controller-no-external.yaml index faf9e9c2..eb5e1e5a 100644 --- a/network/config/single-nic-vlans/controller-no-external.yaml +++ b/network/config/single-nic-vlans/controller-no-external.yaml @@ -25,6 +25,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -45,6 +49,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -92,6 +100,13 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/controller.yaml b/network/config/single-nic-vlans/controller.yaml index 3c536d67..3b22b36b 100644 --- a/network/config/single-nic-vlans/controller.yaml +++ b/network/config/single-nic-vlans/controller.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string ExternalNetworkVlanID: default: 10 description: Vlan ID for the external network traffic. @@ -49,6 +53,10 @@ parameters: default: 50 description: Vlan ID for the tenant network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ExternalInterfaceDefaultRoute: default: '10.0.0.1' description: default route for the external network @@ -129,6 +137,12 @@ resources: addresses: - ip_netmask: {get_param: TenantIpSubnet} + #- # Uncomment when including environments/network-management.yaml + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/config/single-nic-vlans/swift-storage.yaml b/network/config/single-nic-vlans/swift-storage.yaml index 83b3304f..efc03393 100644 --- a/network/config/single-nic-vlans/swift-storage.yaml +++ b/network/config/single-nic-vlans/swift-storage.yaml @@ -29,6 +29,10 @@ parameters: default: '' description: IP address/subnet on the tenant network type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -41,6 +45,10 @@ parameters: default: 40 description: Vlan ID for the storage mgmt network traffic. type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -107,6 +115,13 @@ resources: addresses: - ip_netmask: {get_param: StorageMgmtIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} outputs: OS::stack_id: diff --git a/network/endpoints/endpoint_map.yaml b/network/endpoints/endpoint_map.yaml index 05214011..f6063c0e 100644 --- a/network/endpoints/endpoint_map.yaml +++ b/network/endpoints/endpoint_map.yaml @@ -40,6 +40,9 @@ parameters: SwiftProxyVirtualIP: type: string default: '' + SaharaApiVirtualIP: + type: string + default: '' EndpointMap: type: json default: @@ -74,11 +77,14 @@ parameters: SwiftAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} SwiftInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} SwiftPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaPublic: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} description: Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. CloudName: type: string - default: '' + default: overcloud description: The DNS name of this cloud. E.g. ci-overcloud.tripleo.org resources: @@ -404,6 +410,31 @@ resources: IP: {get_param: SwiftProxyVirtualIP} CloudName: {get_param: CloudName} + SaharaInternal: + type: OS::TripleO::Endpoint + properties: + EndpointName: SaharaInternal + EndpointMap: { get_param: EndpointMap } + IP: {get_param: SaharaApiVirtualIP} + CloudName: {get_param: CloudName} + UriSuffix: '/v1.1/%(tenant_id)s' + SaharaPublic: + type: OS::TripleO::Endpoint + properties: + EndpointName: SaharaPublic + EndpointMap: { get_param: EndpointMap } + IP: {get_param: SaharaApiVirtualIP} + CloudName: {get_param: CloudName} + UriSuffix: '/v1.1/%(tenant_id)s' + SaharaAdmin: + type: OS::TripleO::Endpoint + properties: + EndpointName: SaharaAdmin + EndpointMap: { get_param: EndpointMap } + IP: {get_param: SaharaApiVirtualIP} + CloudName: {get_param: CloudName} + UriSuffix: '/v1.1/%(tenant_id)s' + outputs: endpoint_map: value: @@ -448,3 +479,6 @@ outputs: SwiftS3Internal: {get_attr: [ SwiftS3Internal, endpoint] } SwiftS3Public: {get_attr: [ SwiftS3Public, endpoint] } SwiftS3Admin: {get_attr: [ SwiftS3Admin, endpoint] } + SaharaInternal: {get_attr: [ SaharaInternal, endpoint] } + SaharaPublic: {get_attr: [ SaharaPublic, endpoint] } + SaharaAdmin: {get_attr: [ SaharaAdmin, endpoint] }
\ No newline at end of file diff --git a/network/external.yaml b/network/external.yaml index e8f92a5e..3b24da7e 100644 --- a/network/external.yaml +++ b/network/external.yaml @@ -15,7 +15,7 @@ parameters: type: json ExternalNetAdminStateUp: default: false - description: This admin state of of the network. + description: This admin state of the network. type: boolean ExternalNetEnableDHCP: default: false diff --git a/network/internal_api.yaml b/network/internal_api.yaml index 69154bef..6f8aa3a8 100644 --- a/network/internal_api.yaml +++ b/network/internal_api.yaml @@ -15,7 +15,7 @@ parameters: type: json InternalApiNetAdminStateUp: default: false - description: This admin state of of the network. + description: This admin state of the network. type: boolean InternalApiNetEnableDHCP: default: false diff --git a/network/management.yaml b/network/management.yaml new file mode 100644 index 00000000..9bfaafa2 --- /dev/null +++ b/network/management.yaml @@ -0,0 +1,64 @@ +heat_template_version: 2015-04-30 + +description: > + Management network. System administration, SSH, DNS, NTP, etc. This network + would usually be the default gateway for the non-controller nodes. + +parameters: + # the defaults here work for static IP assignment (IPAM) only + ManagementNetCidr: + default: '10.0.1.0/24' + description: Cidr for the management network. + type: string + ManagementNetValueSpecs: + default: {'provider:physical_network': 'management', 'provider:network_type': 'flat'} + description: Value specs for the management network. + type: string + ManagementNetAdminStateUp: + default: false + description: This admin state of of the network. + type: boolean + ManagementNetEnableDHCP: + default: false + description: Whether to enable DHCP on the associated subnet. + type: boolean + ManagementNetShared: + default: false + description: Whether this network is shared across all tenants. + type: boolean + ManagementNetName: + default: management + description: The name of the management network. + type: string + ManagementSubnetName: + default: management_subnet + description: The name of the management subnet in Neutron. + type: string + ManagementAllocationPools: + default: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] + description: Ip allocation pool range for the management network. + type: json + +resources: + ManagementNetwork: + type: OS::Neutron::Net + properties: + admin_state_up: {get_param: ManagementNetAdminStateUp} + name: {get_param: ManagementNetName} + shared: {get_param: ManagementNetShared} + value_specs: {get_param: ManagementNetValueSpecs} + + ManagementSubnet: + type: OS::Neutron::Subnet + properties: + cidr: {get_param: ManagementNetCidr} + enable_dhcp: {get_param: ManagementNetEnableDHCP} + name: {get_param: ManagementSubnetName} + network: {get_resource: ManagementNetwork} + allocation_pools: {get_param: ManagementAllocationPools} + +outputs: + OS::stack_id: + description: Neutron management network + value: {get_resource: ManagementNetwork} + diff --git a/network/networks.yaml b/network/networks.yaml index 6618af38..ab50ae11 100644 --- a/network/networks.yaml +++ b/network/networks.yaml @@ -18,3 +18,6 @@ resources: TenantNetwork: type: OS::TripleO::Network::Tenant + + ManagementNetwork: + type: OS::TripleO::Network::Management diff --git a/network/ports/ctlplane_vip.yaml b/network/ports/ctlplane_vip.yaml index 3e949f41..7a7043bd 100644 --- a/network/ports/ctlplane_vip.yaml +++ b/network/ports/ctlplane_vip.yaml @@ -5,6 +5,10 @@ description: > The IP address will be chosen automatically if FixedIPs is empty. parameters: + ServiceName: # Here for compatibility with from_service.yaml + description: Name of the service to lookup + default: '' + type: string NetworkName: description: # Here for compatibility with isolated networks default: ctlplane @@ -13,7 +17,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string diff --git a/network/ports/external.yaml b/network/ports/external.yaml index 1e2fff68..7624eb9f 100644 --- a/network/ports/external.yaml +++ b/network/ports/external.yaml @@ -13,7 +13,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string @@ -27,6 +27,12 @@ parameters: [{'ip_address':'1.2.3.4'}] default: [] type: json + IPPool: # Here for compatibility with from_pool.yaml + default: {} + type: json + NodeIndex: # Here for compatibility with from_pool.yaml + default: 0 + type: number resources: diff --git a/network/ports/external_from_pool.yaml b/network/ports/external_from_pool.yaml new file mode 100644 index 00000000..8e9dc7c2 --- /dev/null +++ b/network/ports/external_from_pool.yaml @@ -0,0 +1,45 @@ +heat_template_version: 2015-04-30 + +description: > + Returns an IP from a network mapped list of IPs + +parameters: + ExternalNetName: + description: Name of the external network + default: external + type: string + PortName: + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatability with noop.yaml + description: IP address on the control plane + default: '' + type: string + IPPool: + default: {} + description: A network mapped list of IPs + type: json + NodeIndex: + default: 0 + description: Index of the IP to get from Pool + type: number + ExternalNetCidr: + default: '10.0.0.0/24' + description: Cidr for the external network. + type: string + +outputs: + ip_address: + description: external network IP + value: {get_param: [IPPool, {get_param: ExternalNetName}, {get_param: NodeIndex}]} + ip_subnet: + # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?) + description: IP/Subnet CIDR for the external network IP + value: + list_join: + - '' + - - {get_param: [IPPool, {get_param: ExternalNetName}, {get_param: NodeIndex}]} + - '/' + - {get_param: [ExternalNetCidr, -2]} + - {get_param: [ExternalNetCidr, -1]} diff --git a/network/ports/from_service.yaml b/network/ports/from_service.yaml new file mode 100644 index 00000000..6b669f41 --- /dev/null +++ b/network/ports/from_service.yaml @@ -0,0 +1,34 @@ +heat_template_version: 2015-04-30 + +description: > + Returns an IP from a service mapped list of IPs + +parameters: + ServiceName: + description: Name of the service to lookup + default: '' + type: string + NetworkName: # Here for compatability with ctlplane_vip.yaml + description: Name of the network where the VIP will be created + default: ctlplane + type: string + PortName: # Here for compatability with ctlplane_vip.yaml + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatability with ctlplane_vip.yaml + description: IP address on the control plane + default: '' + type: string + ControlPlaneNetwork: # Here for compatability with ctlplane_vip.yaml + description: The name of the undercloud Neutron control plane + default: ctlplane + type: string + ServiceVips: + default: {} + type: json + +outputs: + ip_address: + description: network IP + value: {get_param: [ServiceVips, {get_param: ServiceName}]} diff --git a/network/ports/internal_api.yaml b/network/ports/internal_api.yaml index d528b327..f84e8f71 100644 --- a/network/ports/internal_api.yaml +++ b/network/ports/internal_api.yaml @@ -12,7 +12,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string @@ -22,6 +22,12 @@ parameters: [{'ip_address':'1.2.3.4'}] default: [] type: json + IPPool: # Here for compatibility with from_pool.yaml + default: {} + type: json + NodeIndex: # Here for compatibility with from_pool.yaml + default: 0 + type: number resources: diff --git a/network/ports/internal_api_from_pool.yaml b/network/ports/internal_api_from_pool.yaml new file mode 100644 index 00000000..b98e1fb1 --- /dev/null +++ b/network/ports/internal_api_from_pool.yaml @@ -0,0 +1,45 @@ +heat_template_version: 2015-04-30 + +description: > + Returns an IP from a network mapped list of IPs + +parameters: + InternalApiNetName: + description: Name of the internal API network + default: internal_api + type: string + PortName: + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatability with noop.yaml + description: IP address on the control plane + default: '' + type: string + IPPool: + default: {} + description: A network mapped list of IPs + type: json + NodeIndex: + default: 0 + description: Index of the IP to get from Pool + type: number + InternalApiNetCidr: + default: '172.16.2.0/24' + description: Cidr for the internal API network. + type: string + +outputs: + ip_address: + description: internal API network IP + value: {get_param: [IPPool, {get_param: InternalApiNetName}, {get_param: NodeIndex}]} + ip_subnet: + # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?) + description: IP/Subnet CIDR for the internal API network IP + value: + list_join: + - '' + - - {get_param: [IPPool, {get_param: InternalApiNetName}, {get_param: NodeIndex}]} + - '/' + - {get_param: [InternalApiNetCidr, -2]} + - {get_param: [InternalApiNetCidr, -1]} diff --git a/network/ports/management.yaml b/network/ports/management.yaml new file mode 100644 index 00000000..1d15ca60 --- /dev/null +++ b/network/ports/management.yaml @@ -0,0 +1,42 @@ +heat_template_version: 2015-04-30 + +description: > + Creates a port on the management network. The IP address will be chosen + automatically if FixedIPs is empty. + +parameters: + ManagementNetName: + description: Name of the management neutron network + default: management + type: string + PortName: + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatibility with noop.yaml + description: IP address on the control plane + type: string + +resources: + + ManagementPort: + type: OS::Neutron::Port + properties: + network: {get_param: ManagementNetName} + name: {get_param: PortName} + replacement_policy: AUTO + +outputs: + ip_address: + description: management network IP + value: {get_attr: [ManagementPort, fixed_ips, 0, ip_address]} + ip_subnet: + # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?) + description: IP/Subnet CIDR for the management network IP + value: + list_join: + - '' + - - {get_attr: [ManagementPort, fixed_ips, 0, ip_address]} + - '/' + - {get_attr: [ManagementPort, subnets, 0, cidr, -2]} + - {get_attr: [ManagementPort, subnets, 0, cidr, -1]} diff --git a/network/ports/net_ip_list_map.yaml b/network/ports/net_ip_list_map.yaml index 257d3f9b..32272bd6 100644 --- a/network/ports/net_ip_list_map.yaml +++ b/network/ports/net_ip_list_map.yaml @@ -19,6 +19,9 @@ parameters: TenantIpList: default: [] type: comma_delimited_list + ManagementIpList: + default: [] + type: comma_delimited_list outputs: net_ip_map: @@ -32,3 +35,4 @@ outputs: storage: {get_param: StorageIpList} storage_mgmt: {get_param: StorageMgmtIpList} tenant: {get_param: TenantIpList} + management: {get_param: ManagementIpList} diff --git a/network/ports/net_ip_map.yaml b/network/ports/net_ip_map.yaml index 7aaed160..c6386025 100644 --- a/network/ports/net_ip_map.yaml +++ b/network/ports/net_ip_map.yaml @@ -19,6 +19,9 @@ parameters: TenantIp: default: '' type: string + ManagementIp: + default: '' + type: string outputs: net_ip_map: @@ -32,3 +35,4 @@ outputs: storage: {get_param: StorageIp} storage_mgmt: {get_param: StorageMgmtIp} tenant: {get_param: TenantIp} + management: {get_param: ManagementIp} diff --git a/network/ports/net_ip_subnet_map.yaml b/network/ports/net_ip_subnet_map.yaml index cf59adb3..2f933eaa 100644 --- a/network/ports/net_ip_subnet_map.yaml +++ b/network/ports/net_ip_subnet_map.yaml @@ -19,6 +19,9 @@ parameters: TenantIpSubnet: default: '' type: string + ManagementIpSubnet: + default: '' + type: string ControlPlaneSubnetCidr: # Override this via parameter_defaults default: '24' description: The subnet CIDR of the control plane network. @@ -41,3 +44,4 @@ outputs: storage: {get_param: StorageIpSubnet} storage_mgmt: {get_param: StorageMgmtIpSubnet} tenant: {get_param: TenantIpSubnet} + management: {get_param: ManagementIpSubnet} diff --git a/network/ports/net_vip_map_external.yaml b/network/ports/net_vip_map_external.yaml index 36426b32..23e1f992 100644 --- a/network/ports/net_vip_map_external.yaml +++ b/network/ports/net_vip_map_external.yaml @@ -2,7 +2,7 @@ heat_template_version: 2015-04-30 parameters: # Set these via parameter defaults to configure external VIPs - ControlNetworkVip: + ControlPlaneIP: default: '' type: string ExternalNetworkVip: @@ -43,7 +43,7 @@ outputs: A Hash containing a mapping of network names to assigned IPs for a specific machine. value: - ctlplane: {get_param: ControlNetworkVip} + ctlplane: {get_param: ControlPlaneIP} external: {get_param: ExternalNetworkVip} internal_api: {get_param: InternalApiNetworkVip} storage: {get_param: StorageNetworkVip} diff --git a/network/ports/noop.yaml b/network/ports/noop.yaml index 31ee6f3c..ac946cd9 100644 --- a/network/ports/noop.yaml +++ b/network/ports/noop.yaml @@ -4,6 +4,10 @@ description: > Returns the control plane port (provisioning network) as the ip_address. parameters: + ServiceName: # Here for compatibility with from_service.yaml + description: Name of the service to lookup + default: '' + type: string ControlPlaneIP: description: IP address on the control plane type: string @@ -16,7 +20,7 @@ parameters: default: '' type: string NetworkName: - description: # Here for compatability with vip.yaml + description: # Here for compatibility with vip.yaml default: '' type: string FixedIPs: @@ -27,6 +31,14 @@ parameters: default: '24' description: The subnet CIDR of the control plane network. type: string + IPPool: # Here for compatibility with from_pool.yaml + default: {} + description: A network mapped list of IPs + type: json + NodeIndex: # Here for compatibility with from_pool.yaml + default: 0 + description: Index of the IP to get from Pool + type: number outputs: ip_address: diff --git a/network/ports/storage.yaml b/network/ports/storage.yaml index 88fb537c..a07e5a4f 100644 --- a/network/ports/storage.yaml +++ b/network/ports/storage.yaml @@ -12,7 +12,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string @@ -22,6 +22,12 @@ parameters: [{'ip_address':'1.2.3.4'}] default: [] type: json + IPPool: # Here for compatibility with from_pool.yaml + default: {} + type: json + NodeIndex: # Here for compatibility with from_pool.yaml + default: 0 + type: number resources: diff --git a/network/ports/storage_from_pool.yaml b/network/ports/storage_from_pool.yaml new file mode 100644 index 00000000..668bc6f6 --- /dev/null +++ b/network/ports/storage_from_pool.yaml @@ -0,0 +1,45 @@ +heat_template_version: 2015-04-30 + +description: > + Returns an IP from a network mapped list of IPs + +parameters: + StorageNetName: + description: Name of the storage network + default: storage + type: string + PortName: + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatability with noop.yaml + description: IP address on the control plane + default: '' + type: string + IPPool: + default: {} + description: A network mapped list of IPs + type: json + NodeIndex: + default: 0 + description: Index of the IP to get from Pool + type: number + StorageNetCidr: + default: '172.16.1.0/24' + description: Cidr for the storage network. + type: string + +outputs: + ip_address: + description: storage network IP + value: {get_param: [IPPool, {get_param: StorageNetName}, {get_param: NodeIndex}]} + ip_subnet: + # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?) + description: IP/Subnet CIDR for the storage network IP + value: + list_join: + - '' + - - {get_param: [IPPool, {get_param: StorageNetName}, {get_param: NodeIndex}]} + - '/' + - {get_param: [StorageNetCidr, -2]} + - {get_param: [StorageNetCidr, -1]} diff --git a/network/ports/storage_mgmt.yaml b/network/ports/storage_mgmt.yaml index c98a21ef..4890bf5a 100644 --- a/network/ports/storage_mgmt.yaml +++ b/network/ports/storage_mgmt.yaml @@ -12,7 +12,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string @@ -22,6 +22,12 @@ parameters: [{'ip_address':'1.2.3.4'}] default: [] type: json + IPPool: # Here for compatibility with from_pool.yaml + default: {} + type: json + NodeIndex: # Here for compatibility with from_pool.yaml + default: 0 + type: number resources: diff --git a/network/ports/storage_mgmt_from_pool.yaml b/network/ports/storage_mgmt_from_pool.yaml new file mode 100644 index 00000000..bea87105 --- /dev/null +++ b/network/ports/storage_mgmt_from_pool.yaml @@ -0,0 +1,45 @@ +heat_template_version: 2015-04-30 + +description: > + Returns an IP from a network mapped list of IPs + +parameters: + StorageMgmtNetName: + description: Name of the storage MGMT network + default: storage_mgmt + type: string + PortName: + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatability with noop.yaml + description: IP address on the control plane + default: '' + type: string + IPPool: + default: {} + description: A network mapped list of IPs + type: json + NodeIndex: + default: 0 + description: Index of the IP to get from Pool + type: number + StorageMgmtNetCidr: + default: '172.16.3.0/24' + description: Cidr for the storage MGMT network. + type: string + +outputs: + ip_address: + description: storage MGMT network IP + value: {get_param: [IPPool, {get_param: StorageMgmtNetName}, {get_param: NodeIndex}]} + ip_subnet: + # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?) + description: IP/Subnet CIDR for the storage MGMT network IP + value: + list_join: + - '' + - - {get_param: [IPPool, {get_param: StorageMgmtNetName}, {get_param: NodeIndex}]} + - '/' + - {get_param: [StorageMgmtNetCidr, -2]} + - {get_param: [StorageMgmtNetCidr, -1]} diff --git a/network/ports/tenant.yaml b/network/ports/tenant.yaml index 94408ca2..86c58f2f 100644 --- a/network/ports/tenant.yaml +++ b/network/ports/tenant.yaml @@ -12,7 +12,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string @@ -22,6 +22,12 @@ parameters: [{'ip_address':'1.2.3.4'}] default: [] type: json + IPPool: # Here for compatibility with from_pool.yaml + default: {} + type: json + NodeIndex: # Here for compatibility with from_pool.yaml + default: 0 + type: number resources: diff --git a/network/ports/tenant_from_pool.yaml b/network/ports/tenant_from_pool.yaml new file mode 100644 index 00000000..29303bb6 --- /dev/null +++ b/network/ports/tenant_from_pool.yaml @@ -0,0 +1,45 @@ +heat_template_version: 2015-04-30 + +description: > + Returns an IP from a network mapped list of IPs + +parameters: + TenantNetName: + description: Name of the tenant network + default: tenant + type: string + PortName: + description: Name of the port + default: '' + type: string + ControlPlaneIP: # Here for compatability with noop.yaml + description: IP address on the control plane + default: '' + type: string + IPPool: + default: {} + description: A network mapped list of IPs + type: json + NodeIndex: + default: 0 + description: Index of the IP to get from Pool + type: number + TenantNetCidr: + default: '172.16.0.0/24' + description: Cidr for the tenant network. + type: string + +outputs: + ip_address: + description: tenant network IP + value: {get_param: [IPPool, {get_param: TenantNetName}, {get_param: NodeIndex}]} + ip_subnet: + # FIXME: this assumes a 2 digit subnet CIDR (need more heat functions?) + description: IP/Subnet CIDR for the tenant network IP + value: + list_join: + - '' + - - {get_param: [IPPool, {get_param: TenantNetName}, {get_param: NodeIndex}]} + - '/' + - {get_param: [TenantNetCidr, -2]} + - {get_param: [TenantNetCidr, -1]} diff --git a/network/ports/vip.yaml b/network/ports/vip.yaml index 56efc178..9bb6cde2 100644 --- a/network/ports/vip.yaml +++ b/network/ports/vip.yaml @@ -5,6 +5,10 @@ description: > The IP address will be chosen automatically if FixedIPs is empty. parameters: + ServiceName: # Here for compatibility with from_service.yaml + description: Name of the service to lookup + default: '' + type: string NetworkName: description: Name of the network where the VIP will be created default: internal_api @@ -13,7 +17,7 @@ parameters: description: Name of the port default: '' type: string - ControlPlaneIP: # Here for compatability with noop.yaml + ControlPlaneIP: # Here for compatibility with noop.yaml description: IP address on the control plane default: '' type: string diff --git a/network/storage.yaml b/network/storage.yaml index 60b779e0..dc9f35ea 100644 --- a/network/storage.yaml +++ b/network/storage.yaml @@ -15,7 +15,7 @@ parameters: type: json StorageNetAdminStateUp: default: false - description: This admin state of of the network. + description: This admin state of the network. type: boolean StorageNetEnableDHCP: default: false diff --git a/network/storage_mgmt.yaml b/network/storage_mgmt.yaml index 043bc87b..59933c8c 100644 --- a/network/storage_mgmt.yaml +++ b/network/storage_mgmt.yaml @@ -15,7 +15,7 @@ parameters: type: json StorageMgmtNetAdminStateUp: default: false - description: This admin state of of the network. + description: This admin state of the network. type: boolean StorageMgmtNetEnableDHCP: default: false diff --git a/network/tenant.yaml b/network/tenant.yaml index daf5cb75..6fe96121 100644 --- a/network/tenant.yaml +++ b/network/tenant.yaml @@ -15,7 +15,7 @@ parameters: type: json TenantNetAdminStateUp: default: false - description: This admin state of of the network. + description: This admin state of the network. type: boolean TenantNetEnableDHCP: default: false |